+
−/*
+
− * This module has been added to the Leonardo GSM firmware source by
+
− * Spacefalcon the Outlaw.  It contains the implementation of the AT@
+
− * commands which were invented by Openmoko.  The addition of this code
+
− * to the present leo2moko source tree allows our fw to serve as a
+
− * compatible and fully functional replacement for the closed original
+
− * mokoN firmware.
+
− */
+
−
+
−#ifndef ATI_OMCOMPAT_C
+
−#define ATI_OMCOMPAT_C
+
−
+
−#include "aci_all.h"
+
−
+
−#include <ctype.h>
+
−#include <string.h>
+
−
+
−#include "aci_cmh.h"
+
−#include "ati_cmd.h"
+
−#include "aci_cmd.h"
+
−#include "aci_io.h"
+
−#include "aci_cmd.h"
+
−#include "l4_tim.h"
+
−#include "line_edit.h"
+
−#include "aci_lst.h"
+
−
+
−#include "pcm.h"
+
−#include "audio.h"
+
−#include "aci.h"
+
−#include "rx.h"
+
−#include "pwr.h"
+
−#include "l4_tim.h"
+
−
+
−#ifdef GPRS
+
−#ifdef DTI
+
−#include "dti.h"
+
−#include "dti_conn_mng.h"
+
−#include "dti_cntrl_mng.h"
+
−#endif /* DTI */
+
−#include "gaci.h"
+
−#include "gaci_cmh.h"
+
−#include "gaci_cmd.h"
+
−#endif  /* GPRS */
+
−
+
−#include "aci_mem.h"
+
−#include "aci_prs.h"
+
−
+
−#include "ati_int.h"
+
−
+
−#ifndef _SIMULATION_
+
−#include "ffs/ffs.h"
+
−#endif
+
−
+
−#ifdef FF_ATI_BAT
+
−
+
−#include "typedefs.h"
+
−#include "gdd.h"
+
−#include "bat.h"
+
−
+
−#include "ati_bat.h"
+
−
+
−#endif /*FF_ATI_BAT*/
+
−
+
−#include "audio/audio_api.h"
+
−#include "abb.h"
+
−#include "dar/dar_api.h"
+
−
+
−#ifdef GPRS
+
−#include "p_mph.h"
+
−#include "p_mphc.h"
+
−#include "../alr/alr_gprs.h"
+
−#endif
+
−#include "p_tb.h"
+
−#include "../alr/alr.h"
+
−
+
−/*
+
− * PURPOSE : @ST command (Configure the sidetone level)
+
− */
+
−GLOBAL T_ATI_RSLT atAtST (char *cl, UBYTE srcId)
+
−{
+
−	char tmp[8]={0};
+
−	INT8 gain = -26;
+
−	TRACE_FUNCTION("atAtST()");
+
−
+
−	/*
+
−	 * input functionality
+
−	 */
+
−	cl = parse(cl,"s", (LONG)8, tmp);
+
−
+
−	gain = atoi(tmp);
+
−
+
−	if ( cl )
+
−	{
+
−		if ( gain == -23 || gain == -20 || gain == -17 || gain == -14 || gain == -11 || gain == -8 || gain == -5 || gain == -2 || gain == 1 || gain == -26 )
+
−		{
+
−			Side_Tone_Write(gain);
+
−			return (ATI_CMPL);
+
−		}
+
−		else
+
−		{
+
−			cmdCmsError(CMS_ERR_OpNotAllowed);
+
−			return (ATI_FAIL);
+
−		}
+
−	}
+
−}
+
−
+
−GLOBAL T_ATI_RSLT queatAtST (char *cl, UBYTE srcId)
+
−{
+
−	char *me="+ST: ";
+
−	INT8 ST1;
+
−
+
−	TRACE_FUNCTION("queatAtST()");
+
−
+
−	ST1 = Side_Tone_Read();
+
−
+
−	sprintf(g_sa,"%s%d",me,ST1);
+
−
+
−	io_sendMessage(srcId, g_sa, ATI_NORMAL_OUTPUT);
+
−
+
−	return (ATI_CMPL);
+
−}
+
−
+
−/*
+
− * PURPOSE : @POFF command (Power Off GSM Modem)
+
− */
+
− 
+
−GLOBAL T_ATI_RSLT atAtPOFF (char *cl, UBYTE srcId)
+
−{
+
−	TRACE_FUNCTION("atAtPOFF");
+
−
+
−	sprintf(g_sa,"%s","OK");
+
−	io_sendMessage(srcId, g_sa, ATI_NORMAL_OUTPUT);
+
−
+
−	ABB_Power_Off();
+
−
+
−	return (ATI_CMPL);
+
−}
+
−
+
−/*
+
− * PURPOSE : @RST command (Reset GSM Modem)
+
− */
+
− 
+
−GLOBAL T_ATI_RSLT atAtRST (char *cl, UBYTE srcId)
+
−{
+
−	TRACE_FUNCTION("atAtRST");
+
−
+
−	dar_reset_system();
+
−
+
−	return (ATI_CMPL);
+
−}
+
−
+
−/*
+
− * Openmoko's firmware contains an undocumented AT@SC command that
+
− * sets/changes the IMEI of the modem.  However, it takes the IMEI
+
− * input in an obfuscated form, and the logic is broken - hence
+
− * we are NOT reimplementing this bogon in FreeCalypso.
+
− *
+
− * If you feel like changing your modem's IMEI, you can do it
+
− * through the RVTMUX interface with our fc-fsio utility's
+
− * set-imeisv command.
+
− */
+
−
+
−/*
+
− * PURPOSE : @BAND command (Get RF band)
+
− */
+
−
+
−GLOBAL T_ATI_RSLT atAtBAND (char *cl, UBYTE srcId)
+
−{		
+
−    char szDummy[32]; // to produce the exact same assembler code
+
−    char szBand[32];    
+
−    UBYTE band_sc = get_band (alr_data->serving_cell); // to produce the exact same assembler code
+
−
+
−	TRACE_FUNCTION("atAtBAND");			
+
−	band_sc = alr_data->sc_band;
+
−    switch(band_sc)
+
−    {
+
−    case BAND_GSM_900:
+
−      strcpy(szBand, "GSM 900");
+
−      break;
+
−    case BAND_DCS_1800:
+
−      strcpy(szBand, "DCS 1800");
+
−      break;
+
−    case BAND_PCS_1900:
+
−      strcpy(szBand, "PCS 1900");
+
−      break;
+
−    case BAND_E_GSM:
+
−      strcpy(szBand, "EGSM");
+
−      break;
+
−    case BAND_GSM_850:
+
−      strcpy(szBand, "GSM 850");
+
−      break;
+
−    default:
+
−      strcpy(szBand, "Unknown");
+
−      break;
+
−    }
+
−	sprintf(g_sa,"%s", szBand);  		
+
−	io_sendMessage(srcId, g_sa, ATI_NORMAL_OUTPUT);
+
−		
+
−	return (ATI_CMPL);	
+
−}
+
−
+
−#endif /* ATI_OMCOMPAT_C */
+
−