FreeCalypso > hg > fc-magnetite
view cdg-hybrid/cdginc/p_8010_136_simdrv_sap.val @ 306:67d1fd7c824c
serialswitch.c: allow enabling SERIAL_DYNAMIC_SWITCH outside of BTEMOBILE
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Thu, 02 Nov 2017 05:42:39 +0000 |
parents | e7a67accfad9 |
children |
line wrap: on
line source
/* +--------------------------------------------------------------------------+ | PROJECT : PROTOCOL STACK | | FILE : p_8010_136_simdrv_sap.val | | SOURCE : "sap\8010_136_SIMDRV_SAP.pdf" | | LastModified : "2004-06-10" | | IdAndVersion : "8010.136.03.009" | | SrcFileTime : "Thu Nov 29 09:27:56 2007" | | Generated by CCDGEN_2.5.5A on Fri Oct 14 21:41:52 2016 | | !!DO NOT MODIFY!!DO NOT MODIFY!!DO NOT MODIFY!! | +--------------------------------------------------------------------------+ */ /* PRAGMAS * PREFIX : SIMDRV * COMPATIBILITY_DEFINES : NO * ALWAYS_ENUM_IN_VAL_FILE: YES * ENABLE_GROUP: YES * CAPITALIZE_TYPENAME: NO */ #ifndef P_8010_136_SIMDRV_SAP_VAL #define P_8010_136_SIMDRV_SAP_VAL #define CDG_ENTER__P_8010_136_SIMDRV_SAP_VAL #define CDG_ENTER__FILENAME _P_8010_136_SIMDRV_SAP_VAL #define CDG_ENTER__P_8010_136_SIMDRV_SAP_VAL__FILE_TYPE CDGINC #define CDG_ENTER__P_8010_136_SIMDRV_SAP_VAL__LAST_MODIFIED _2004_06_10 #define CDG_ENTER__P_8010_136_SIMDRV_SAP_VAL__ID_AND_VERSION _8010_136_03_009 #define CDG_ENTER__P_8010_136_SIMDRV_SAP_VAL__SRC_FILE_TIME _Thu_Nov_29_09_27_56_2007 #include "CDG_ENTER.h" #undef CDG_ENTER__P_8010_136_SIMDRV_SAP_VAL #undef CDG_ENTER__FILENAME /* * Enum to value table VAL_reset_return_val * CCDGEN:WriteEnum_Count==29 */ #ifndef __T_SIMDRV_VAL_reset_return_val__ #define __T_SIMDRV_VAL_reset_return_val__ typedef enum { SIMDRV_SIM_INSERTED = 0x0, /* A SIM is inserted and ATR/PPS was successful */ SIMDRV_SIM_NOT_INSERTED = 0x1, /* No SIM inserted (hardware detected) */ SIMDRV_INVALID_CARD = 0x2, /* Card is not responding or gives unintelligible answers, communications time out. */ SIMDRV_ME_FAILURE = 0x3, /* Power management related problems, e.g. voltage selection */ SIMDRV_IMPROPER_CALL_BACK = 0x4, /* simdrv_register function called with pointer improperly set, e.g. NULL. */ SIMDRV_ME_READER_NOT_AVAILABLE = 0x5 /* The reader requested is not available */ }T_SIMDRV_VAL_reset_return_val; #endif /* * Enum to value table VAL_len * CCDGEN:WriteEnum_Count==31 */ #ifndef __T_SIMDRV_VAL_len__ #define __T_SIMDRV_VAL_len__ typedef enum { SIMDRV_VAL_LEN__RANGE_MIN = 0x0, /* minimum */ SIMDRV_VAL_LEN__RANGE_MAX = 0x100, /* maximum */ SIMDRV_LENGTH_UNKNOWN = 0xffff /* Indicating that the length expected is unknown. */ }T_SIMDRV_VAL_len; #endif /* * Enum to value table VAL_sw1_2 * CCDGEN:WriteEnum_Count==33 */ #ifndef __T_SIMDRV_VAL_sw1_2__ #define __T_SIMDRV_VAL_sw1_2__ typedef enum { SIMDRV_ERR_NOCARD = 0x1, /* No SIM inserted (hardware detected) */ SIMDRV_ERR_NOT_RESET = 0x2, /* A reset has not been performed on the driver with the requested Id. */ SIMDRV_ERR_ME_FAIL = 0x3, /* Unrecoverable ME failure (for instance interrupt fails to occur) */ SIMDRV_ERR_RETRY_FAIL = 0x4, /* ME/SIM communication failed after certain retries, SIM reset required */ SIMDRV_ERR_PARAM_WRONG = 0x5 /* A driver function is called with invalid parameters */ }T_SIMDRV_VAL_sw1_2; #endif /* * Enum to value table VAL_cla * CCDGEN:WriteEnum_Count==35 */ #ifndef __T_SIMDRV_VAL_cla__ #define __T_SIMDRV_VAL_cla__ typedef enum { SIMDRV_GSM_CLASS_BYTE = 0xa0, /* GSM Class byte according to [GSM 11.11 / 3GPP 51.011] */ SIMDRV_UMTS_CLASS_BYTE = 0x80, /* UMTS Class byte according to [ETSI 102 221 10.1.2] */ SIMDRV_UICC_CLASS_BYTE = 0x0 /* UICC Class byte according to [ISO 7816-4] */ }T_SIMDRV_VAL_cla; #endif /* * Enum to value table VAL_ins * CCDGEN:WriteEnum_Count==37 */ #ifndef __T_SIMDRV_VAL_ins__ #define __T_SIMDRV_VAL_ins__ typedef enum { SIMDRV_INS_SELECT = 0xa4, /* Select Instruction */ SIMDRV_INS_STATUS = 0xf2, /* Status Instruction */ SIMDRV_INS_READ_BINARY = 0xb0, /* Read Binary Instruction */ SIMDRV_INS_UPDATE_BINARY = 0xd6, /* Update Binary Instruction */ SIMDRV_INS_READ_RECORD = 0xb2, /* Read Record Instruction */ SIMDRV_INS_UPDATE_RECORD = 0xdc, /* Update Record Instruction */ SIMDRV_INS_SEEK = 0xa2, /* Seek Instruction */ SIMDRV_INS_INCREASE = 0x32, /* Increase Instruction */ SIMDRV_INS_VERIFY_CHV = 0x20, /* Verify Chv Instruction */ SIMDRV_INS_CHANGE_CHV = 0x24, /* Change Chv Instruction */ SIMDRV_INS_DISABLE_CHV = 0x26, /* Disable Chv Instruction */ SIMDRV_INS_ENABLE_CHV = 0x28, /* Ensable Chv Instruction */ SIMDRV_INS_UNBLOCK_CHV = 0x2c, /* Unblock Chv Instruction */ SIMDRV_INS_INVALIDATE = 0x4, /* Invalidate Instruction */ SIMDRV_INS_REHABILITATE = 0x44, /* Rehabilitate Instruction */ SIMDRV_INS_AUTHENTICATE = 0x88, /* Run GSM Algorithm (2/2.5G) / Authenticate (3G) Instruction */ SIMDRV_INS_TERMINAL_PROFILE = 0x10, /* Terminal Profile Instruction */ SIMDRV_INS_ENVELOPE = 0xc2, /* Envelope Instruction */ SIMDRV_INS_FETCH = 0x12, /* Fetch Instruction */ SIMDRV_INS_TERMINAL_RESPONSE = 0x14, /* Terminal Response Instruction */ SIMDRV_INS_GET_RESPONSE = 0xc0 /* Get Response Instruction */ }T_SIMDRV_VAL_ins; #endif /* * Enum to value table VAL_voltage_select * CCDGEN:WriteEnum_Count==39 */ #ifndef __T_SIMDRV_VAL_voltage_select__ #define __T_SIMDRV_VAL_voltage_select__ typedef enum { SIMDRV_REQ_VOLTAGE_SEL = 0x0, /* The SIM reader driver shall perform voltage selection */ SIMDRV_OMIT_VOLTAGE_SEL = 0x1 /* The SIM reader driver shall restart with the current voltage */ }T_SIMDRV_VAL_voltage_select; #endif /* * Enum to value table VAL_config_requested * CCDGEN:WriteEnum_Count==41 */ #ifndef __T_SIMDRV_VAL_config_requested__ #define __T_SIMDRV_VAL_config_requested__ typedef enum { SIMDRV_OMIT_CONFIG_CHARACTERISTICS = 0x0, /* PS Shall not retrieve Configuration Characteristics */ SIMDRV_REQUEST_CONFIG_CHARACTERISTICS = 0x1 /* PS Shall retrieve Configuration Characteristics */ }T_SIMDRV_VAL_config_requested; #endif /* * Enum to value table VAL_reader_id * CCDGEN:WriteEnum_Count==43 */ #ifndef __T_SIMDRV_VAL_reader_id__ #define __T_SIMDRV_VAL_reader_id__ typedef enum { SIMDRV_VAL_READER_ID__RANGE_MIN = 0x1, /* minimum */ SIMDRV_VAL_READER_ID__RANGE_MAX = 0x2 /* maximum */ }T_SIMDRV_VAL_reader_id; #endif /* * user defined constants */ #define SIMDRV_SIZE_ATR_INFO (0x21) #define SIMDRV_MIN_RESULT (0x1) #define SIMDRV_MAX_RESULT (0x100) #define SIMDRV_MIN_DATA_SIZE (0x1) #define SIMDRV_MAX_DATA_SIZE (0xff) #define SIMDRV_MAX_READERS (0x2) #include "CDG_LEAVE.h" #endif