FreeCalypso > hg > fc-magnetite

view cdg-hybrid/sap/udpa.pdf @ 549:69e52afc01d5

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
configs/* except classic: rebuild tif_na7_db_{fl,ir} from source The purpose of this change is to allow a TRACEMASK_IN_FFS=1 setting given on the configure line to have effect; all configs except classic are included because this feature setting is orthogonal to the choice of G23M PS version and other config choices. (The classic config is an exception because its very purpose is to preserve a reference config with all of the original blobs.) Note that even though we are switching these TIF libraries from blobs to recompilation from source in all configs, our source for these libs compiles into a perfect match to the original blobs in the current default TRACEMASK_IN_FFS=0 configuration, hence there is no effective change beyond the unfortunate small increase in compilation times.
author Mychaela Falconia <falcon@freecalypso.org>
date Sun, 18 Nov 2018 08:33:30 +0000
parents e7a67accfad9
children
line wrap: on
line source

;********************************************************************************
;*** File           : udpa.pdf
;*** Creation       : Wed Mar 11 09:58:55 CST 2009
;*** XSLT Processor : Apache Software Foundation / http://xml.apache.org/xalan-j / supports XSLT-Ver: 1
;*** Copyright      : (c) Texas Instruments AG, Berlin Germany 2002
;********************************************************************************
;*** Document Type  : Service Access Point Specification
;*** Document Name  : udpa
;*** Document No.   : 8444.103.02.006
;*** Document Date  : 2003-08-26
;*** Document Status: BEING_PROCESSED
;*** Document Author: Jacek
;********************************************************************************



PRAGMA 	SRC_FILE_TIME 	"Thu Nov 29 09:56:38 2007"
PRAGMA 	LAST_MODIFIED 	"2003-08-26"
PRAGMA 	ID_AND_VERSION 	"8444.103.02.006"



CONST 	UDPA_ENTITY_NAME_LEN 	6 	; maximum length of entity name including NULL



VALTAB 	VAL_dti_conn
VAL 	0 	UDPA_CONNECT_DTI 	"Connect DTI2 to UDP"
VAL 	1 	UDPA_DISCONNECT_DTI 	"Disconnect DTI2 from UDP"

VALTAB 	VAL_link_id
VAL 	0 	UDPA_LINK_ID_DEFAULT 	"Default link id"

VALTAB 	VAL_dti_direction
VAL 	0 	UDPA_DTI_TO_HIGHER_LAYER 	"DTI2 used normally"
VAL 	1 	UDPA_DTI_TO_LOWER_LAYER 	"DTI2 is inverted"

VALTAB 	VAL_cmd
VAL 	0 	UDPA_CONFIG_UP 	"enable the interface"
VAL 	1 	UDPA_CONFIG_DOWN 	"disable the interface"




VAR 	dti_conn 	"DTI2 connect" 	B

VAL 	@p_udpa - VAL_dti_conn@ 	

VAR 	link_id 	"Link identifier" 	L

VAL 	@p_udpa - VAL_link_id@ 	

VAR 	dti_direction 	"DTI2 direction" 	B

VAL 	@p_udpa - VAL_dti_direction@ 	

VAR 	entity_name 	"name of an neighbour entity" 	B


VAR 	cmd 	"command" 	B

VAL 	@p_udpa - VAL_cmd@ 	







; UDPA_DTI_REQ 	0x8000003B
; UDPA_DTI_CNF 	0x8000403B
; UDPA_DTI_IND 	0x8001403B
; UDPA_CONFIG_REQ 	0x8001003B
; UDPA_CONFIG_CNF 	0x8002403B



PRIM 	UDPA_DTI_REQ 	0x8000003B
{
 	dti_conn 	 ; DTI connect
 	entity_name 	[UDPA_ENTITY_NAME_LEN] 	 ; Entity name
 	link_id 	 ; Link identifier
 	dti_direction 	 ; DTI direction
}






PRIM 	UDPA_DTI_CNF 	0x8000403B
{
 	dti_conn 	 ; DTI connect
 	link_id 	 ; Link identifier
}






PRIM 	UDPA_DTI_IND 	0x8001403B
{
 	link_id 	 ; link identifier
}






PRIM 	UDPA_CONFIG_REQ 	0x8001003B
{
 	cmd 	 ; Command
}






PRIM 	UDPA_CONFIG_CNF 	0x8002403B
{
}