FreeCalypso > hg > fc-magnetite
view cdg211/msg/sm.mdf @ 549:69e52afc01d5
configs/* except classic: rebuild tif_na7_db_{fl,ir} from source
The purpose of this change is to allow a TRACEMASK_IN_FFS=1 setting given
on the configure line to have effect; all configs except classic are
included because this feature setting is orthogonal to the choice of
G23M PS version and other config choices. (The classic config is an
exception because its very purpose is to preserve a reference config
with all of the original blobs.)
Note that even though we are switching these TIF libraries from blobs
to recompilation from source in all configs, our source for these libs
compiles into a perfect match to the original blobs in the current default
TRACEMASK_IN_FFS=0 configuration, hence there is no effective change
beyond the unfortunate small increase in compilation times.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Sun, 18 Nov 2018 08:33:30 +0000 |
parents | 56abf6cf8a0b |
children |
line wrap: on
line source
;******************************************************************************** ;*** File : sm.mdf ;*** Creation : Fri Jun 08 13:59:08 CST 2007 ;*** XSLT Processor : Apache Software Foundation / http://xml.apache.org/xalan-j / supports XSLT-Ver: 1 ;*** Copyright : (c) Texas Instruments AG, Berlin Germany 2002 ;******************************************************************************** ;*** Document Type : Air Interface Message Specification ;*** Document Name : sm ;*** Document No. : 8441.605.99.007 ;*** Document Date : 2002-04-29 ;*** Document Status: BEING_PROCESSED ;*** Document Author: Harald ;******************************************************************************** PRAGMA SRC_FILE_TIME "Mon Nov 24 15:51:04 2003" PRAGMA LAST_MODIFIED "2002-04-29" PRAGMA ID_AND_VERSION "8441.605.99.007" CONST L3MAX 251 ; maximum size of a L3 buffer VALTAB VAL_nsapi_val VAL DEF "reserved" VAL 5 NSAPI_5 "NSAPI 5" VAL 6 NSAPI_6 "NSAPI 6" VAL 7 NSAPI_7 "NSAPI 7" VAL 8 NSAPI_8 "NSAPI 8" VAL 9 NSAPI_9 "NSAPI 9" VAL 10 NSAPI_10 "NSAPI 10" VAL 11 NSAPI_11 "NSAPI 11" VAL 12 NSAPI_12 "NSAPI 12" VAL 13 NSAPI_13 "NSAPI 13" VAL 14 NSAPI_14 "NSAPI 14" VAL 15 NSAPI_15 "NSAPI 15" VALTAB VAL_delay VAL DEF "Delay class 4 (best effort)" VAL 0 DELAY_SUB "Subscribed delay class (uplink only)" VAL 0 DELAY_RES_DL "Reserved (downlink only)" VAL 1 DELAY_1 "Delay class 1" VAL 2 DELAY_2 "Delay class 2" VAL 3 DELAY_3 "Delay class 3" VAL 4 DELAY_4 "Delay class 4 (best effort)" VAL 7 DELAY_RES "Reserved" VALTAB VAL_reliability VAL DEF "Unacknowledged GTP and LLC; Acknowledged RLC, Protected data" VAL 0 RELY_SUB "Subscribed reliability class (uplink only)" VAL 0 RELY_RES_DL "Reserved (dowwnlink only)" VAL 1 RELY_1 "Acknowledged GTP, LLC, and RLC; Protected data" VAL 2 RELY_2 "Unacknowledged GTP; Acknowledged LLC and RLC, Protected data" VAL 3 RELY_3 "Unacknowledged GTP and LLC; Acknowledged RLC, Protected data" VAL 4 RELY_4 "Unacknowledged GTP, LLC, and RLC, Protected data" VAL 5 RELY_5 "Unacknowledged GTP, LLC, and RLC, Unprotected data" VAL 7 RELY_RES "Reserved" VALTAB VAL_sapi VAL DEF "reserved" VAL 3 SAPI_3 "SAPI 3" VAL 5 SAPI_5 "SAPI 5" VAL 9 SAPI_9 "SAPI 9" VAL 11 SAPI_11 "SAPI 11" VALTAB VAL_peak VAL DEF "Up to 1000 octet/s" VAL 0 PEAK_SUB "Subscribed peak throughput (uplink only)" VAL 0 PEAK_RES_DL "reserved (downlink only)" VAL 1 PEAK_1000 "Up to 1000 octet/s" VAL 2 PEAK_2000 "Up to 2000 octet/s" VAL 3 PEAK_4000 "Up to 4000 octet/s" VAL 4 PEAK_8000 "Up to 8000 octet/s" VAL 5 PEAK_16000 "Up to 16000 octet/s" VAL 6 PEAK_32000 "Up to 32000 octet/s" VAL 7 PEAK_64000 "Up to 64000 octet/s" VAL 8 PEAK_128000 "Up to 128000 octet/s" VAL 9 PEAK_256000 "Up to 256000 octet/s" VAL 15 PEAK_RES "Reserved" VALTAB VAL_precedence VAL DEF "Normal Priority" VAL 0 PRECED_SUB "Subscribed precedence (uplink only)" VAL 0 PRECED_RES_DL "Reserved (downlink only)" VAL 1 PRECED_HIGH "High priority" VAL 2 PRECED_NORM "Normal Priority" VAL 3 PRECED_LOW "Low priority" VAL 7 PRECED_RES "Reserved" VALTAB VAL_mean VAL DEF "Best effort" VAL 0 MEAN_SUB "Subscribed mean throughput (uplink only)" VAL 0 MEAN_RES_DL "reserved (downlink only)" VAL 1 MEAN_100 "100 octet/h" VAL 2 MEAN_200 "200 octet/h" VAL 3 MEAN_500 "500 octet/h" VAL 4 MEAN_1000 "1000 octet/h" VAL 5 MEAN_2000 "2000 octet/h" VAL 6 MEAN_5000 "5000 octet/h" VAL 7 MEAN_10000 "10000 octet/h" VAL 8 MEAN_20000 "20000 octet/h" VAL 9 MEAN_50000 "50000 octet/h" VAL 10 MEAN_100000 "100000 octet/h" VAL 11 MEAN_200000 "200000 octet/h" VAL 12 MEAN_500000 "500000 octet/h" VAL 13 MEAN_1000000 "1000000 octet/h" VAL 14 MEAN_2000000 "2000000 octet/h" VAL 15 MEAN_5000000 "5000000 octet/h" VAL 16 MEAN_10000000 "10000000 octet/h" VAL 17 MEAN_20000000 "20000000 octet/h" VAL 18 MEAN_50000000 "50000000 octet/h" VAL 30 MEAN_RES "Reserved" VAL 31 MEAN_BEST "Best effort" VALTAB VAL_pdp_type_org VAL DEF "ETSI allocated address (e.g. X.121)" VAL 0 ETSI_ORG "ETSI allocated address (e.g. X.121)" VAL 1 IETF_ORG "IETF allocated address" VAL 15 PDP_MT "Dynamic PDP addressing is applied, (uplink only)" VALTAB VAL_pdp_type_no VAL DEF "IPv4 address" VAL 0 X121_TYPE "X.121 address" VAL 0b00100001 IP4_TYPE "IPv4 address" VAL 0b01010111 IP6_TYPE "IPv6 address" VALTAB VAL_radio_prio_val VAL DEF "priority level 4 (lowest)" VAL 1 RADIO_PRIO_1 "priority level 1 (highest)" VAL 2 RADIO_PRIO_2 "priority level 2" VAL 3 RADIO_PRIO_3 "priority level 3" VAL 4 RADIO_PRIO_4 "priority level 4 (lowest)" VALTAB VAL_sm_cause_val VAL DEF "Service option temporarily out of order ( received by MS)" VAL 0b00011001 LLC_OR_SNDCP "LLC or SNDCP failure" VAL 0b00011010 INSUF_RES "Insufficient resources" VAL 0b00011011 APN_MISS "Missing or unknown APN" VAL 0b00011100 UNK_PDP "Unknown PDP address or PDP type" VAL 0b00011101 AUTH_FAIL "User Aauthentication failed" VAL 0b00011110 GGSN_ACT_REJ "Activation rejected by GGSN" VAL 0b00011111 UNSPEC_ACT_REJ "Activation rejected, unspecified" VAL 0b00100000 SERV_OPT_NO_SP "Service option not supported" VAL 0b00100001 SERV_OPT_NO_SC "Requested service option not subscribed" VAL 0b00100010 SERV_OPT_TMP "Service option temporarily out of order" VAL 0b00100011 NSAPI_USED "NSAPI already used" VAL 0b00100100 REGULAR "Regular deactivation" VAL 0b00100101 QOS_NOT_ACC "QoS not accepted" VAL 0b00100110 NET_FAIL "Network failure" VAL 0b00100111 REACT_REQ "Reactivation required" VAL 0b01011111 SEM_INCORRECT "Semantically incorrect message" VAL 0b01010001 TI_INVAL "Invalid transaction identifier value" VAL 0b01100000 MAND_INF_INVAL "Invalid mandatory information" VAL 0b01100001 MSG_T_NON_X "Message type non-existent or not implemented" VAL 0b01100010 MSG_T_NOT_COMP "Message type not compatible with the protocol state" VAL 0b01100011 IE_NON_X "Information element non-existent or not implemented" VAL 0b01100100 COND_IE "Conditional IE error" VAL 0b01100101 NO_STATE_COMP "Message not compatible with the protocol state" VAL 0b01101111 UNSPEC "Protocol error, unspecified" VAR nsapi_val "NSAPI value" 4 VAL @m_sm - VAL_nsapi_val@ VAR delay "Delay class" 3 VAL @m_sm - VAL_delay@ VAR reliability "Reliability class" 3 VAL @m_sm - VAL_reliability@ VAR msg_type "Message Type" 8 VAR sapi "SAPI" 4 VAL @m_sm - VAL_sapi@ VAR peak "Peak throughput" 4 VAL @m_sm - VAL_peak@ VAR precedence "Precedence class" 3 VAL @m_sm - VAL_precedence@ VAR mean "Mean throughput" 5 VAL @m_sm - VAL_mean@ VAR apn_value "Access point name value" 8 VAR pdp_type_org "PDP type organisation" 4 VAL @m_sm - VAL_pdp_type_org@ VAR pdp_type_no "PDP type number" 8 VAL @m_sm - VAL_pdp_type_no@ VAR radio_prio_val "Radio priority value" 3 VAL @m_sm - VAL_radio_prio_val@ VAR sm_cause_val "SM cause value" 8 VAL @m_sm - VAL_sm_cause_val@ VAR add_info "Adress information" 8 VAR pco_value "Protocol config value" 8 COMP nsapi "network service access point identifier" { .0000 ; spare nsapi_val ; NSAPI value } COMP llc_sapi "LLC service access point identifier" { .0000 ; spare sapi ; LLC SAPI value } COMP qos "Quality of service" { .00 ; spare delay ; Delay class reliability ; Reliability class peak ; Peak throughput .0 ; spare precedence ; precedence class .000 ; spare mean ; mean throughput } COMP address "Packet data protocol address" { .0000 ; spare pdp_type_org ; PDP type organisation pdp_type_no ; PDP type number add_info [0..20] ; address information } COMP apn "Access point name" { apn_value [3..102] ; access point name value } COMP pco "Protocol information options" { pco_value [2..253] ; options } COMP radio_prio "Radio priority" { .0 ; spare radio_prio_val ; Radio priority value } COMP sm_cause "SM cause" { sm_cause_val ; SM cause value } MSG activate_pdp_req uplink 65 ; activate PDP context request { GSM3_V msg_type ; Message type GSM3_V nsapi ; requested NSAPI GSM3_V llc_sapi ; Requested LLC sapi GSM4_LV qos ; Requested QoS GSM4_LV address ; Requested PDP address GSM4_TLV apn 0x28 ; Access point name GSM4_TLV pco 0x27 ; Protocol configuration options } MSG activate_pdp_acc downlink 66 ; activate PDP context accept { GSM3_V msg_type ; Message type GSM3_V llc_sapi ; Negotiated LLC SAPI GSM4_LV qos ; Negotiated QoS GSM1_V radio_prio ; Radio Priority .0000 ; Spare half octet GSM4_TLV address 0x2B ; Packet data protocol address GSM4_TLV pco 0x27 ; Protocol configuration options } MSG activate_pdp_rej downlink 67 ; activate PDP context reject { GSM3_V msg_type ; Message type GSM3_V sm_cause ; SM cause GSM4_TLV pco 0x27 ; Protocol configuration options } MSG req_pdp_act downlink 68 ; request PDP context activation { GSM3_V msg_type ; Message type GSM4_LV address ; Offered PDP address GSM4_TLV apn 0x28 ; Access point name } MSG req_pdp_act_rej uplink 69 ; request PDP context activation reject { GSM3_V msg_type ; Message type GSM3_V sm_cause ; SM cause } MSG mod_pdp_req downlink 72 ; Modify PDP context request { GSM3_V msg_type ; Message type GSM1_V radio_prio ; Radio Priority .0000 ; Spare half octet GSM3_V llc_sapi ; Requested LLC sapi GSM4_LV qos ; New QoS } MSG mod_pdp_acc uplink 73 ; Modify PDP context accept { GSM3_V msg_type ; Message type } MSG deact_pdp_req both 70 ; Deactivate PDP context request { GSM3_V msg_type ; Message type GSM3_V sm_cause ; SM cause } MSG deact_pdp_acc both 71 ; deactivate PDP context accept { GSM3_V msg_type ; Message type } MSG sm_status both 85 ; SM Status { GSM3_V msg_type ; Message type GSM3_V sm_cause ; SM cause }