/* 
+----------------------------------------------------------------------------- 
|  Project :  GSM-PS (6147)
|  Modul   :  CMH_MMT
+----------------------------------------------------------------------------- 
|  Copyright 2002 Texas Instruments Berlin, AG 
|                 All rights reserved. 
| 
|                 This file is confidential and a trade secret of Texas 
|                 Instruments Berlin, AG 
|                 The receipt of or possession of this file does not convey 
|                 any rights to reproduce or disclose its contents or to 
|                 manufacture, use, or sell anything it may describe, in 
|                 whole, or in part, without the specific written consent of 
|                 Texas Instruments Berlin, AG. 
+----------------------------------------------------------------------------- 
|  Purpose :  This module provides the test functions related to the
|             protocol stack adapter for mobility management.
+----------------------------------------------------------------------------- 
*/ 

#ifndef CMH_MMT_C
#define CMH_MMT_C
#endif

#include "aci_all.h"

/*==== INCLUDES ===================================================*/
#include "aci_cmh.h"


#ifdef FAX_AND_DATA
#include "aci_fd.h"
#endif    /* of #ifdef FAX_AND_DATA */

#include "psa.h"
#include "psa_mm.h"
#include "cmh.h"
#include "cmh_mm.h"


#ifdef GPRS 
#ifdef DTI
#include "dti_conn_mng.h"
#endif
#include "gaci.h"
#include "gaci_cmh.h"
#include "psa_gmm.h"
#include "cmh_gmm.h"
#endif

/*==== CONSTANTS ==================================================*/

/*==== EXPORT =====================================================*/

/*==== VARIABLES ==================================================*/

/*==== FUNCTIONS ==================================================*/
LOCAL T_ACI_RETURN get_available_network_list  ( T_ACI_CMD_SRC srcId,
                                                  T_ACI_AT_CMD cmd,
                                                  SHORT startIdx,
                                                  SHORT * lastIdx,
                                                  T_ACI_COPS_OPDESC * operLst);

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-PS (6147)         MODULE  : CMH_MMQ                  |
| STATE   : code                  ROUTINE : qAT_PercentBAND             |
+--------------------------------------------------------------------+

  PURPOSE : This is the functional counterpart to the %BAND=? AT command
            which returns the current multiband configuration.

            <MaxBandMode>:  highest value of supported band switch modes.
            <AllowedBands>: bitfield of supported bands (manufacturer defined).
*/

GLOBAL T_ACI_RETURN tAT_PercentBAND(T_ACI_CMD_SRC    srcId,
                                    T_ACI_BAND_MODE  *MaxBandMode,
                                    UBYTE            *AllowedBands)
{
  UBYTE dummy;   

  TRACE_FUNCTION ("tAT_PercentBAND()");

  /* check command source */
  if(!cmh_IsVldCmdSrc (srcId))
  {
    ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
    return( AT_FAIL );
  }

  /* process MaxBandMode parameter */
  if(MaxBandMode NEQ NULL)
  {
    *MaxBandMode = BAND_MODE_Manual;  /* it is currently the highest value for BandMode */ 
  }
  
  /* process BandTypeList parameter */
  if( AllowedBands NEQ NULL )
  {
    cmhMM_getBandSettings(&dummy, AllowedBands);
  }
  return( AT_CMPL );
}


/*
+--------------------------------------------------------------------+
| PROJECT : GSM-PS (6147)         MODULE  : CMH_MMT                  |
| STATE   : code                  ROUTINE : tAT_PlusCOPS             |
+--------------------------------------------------------------------+

  PURPOSE : This is the functional counterpart to the +COPS=? AT command
            which is responsible to test for all available network
            operators.

            <startIdx>: Start index for reading the list.
                        Must be zero.
            <lastIdx> : Last index buffers the last read index of the list.
                        Not used, maintained for compatibility reasons.
            <operLst> : List buffer to copy MAX_OPER entries into.
                        Not used, maintained for compatibility reasons.

*/

GLOBAL T_ACI_RETURN tAT_PlusCOPS  ( T_ACI_CMD_SRC srcId,
                                    SHORT startIdx,
                                    SHORT * lastIdx,
                                    T_ACI_COPS_OPDESC * operLst)
{

  TRACE_FUNCTION ("tAT_PlusCOPS()");

/*
 *-------------------------------------------------------------------
 * check command source
 *-------------------------------------------------------------------
 */
  if(!cmh_IsVldCmdSrc (srcId))
  {
    ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
    return( AT_FAIL );
  }

/*
 *-------------------------------------------------------------------
 * check entity status
 *-------------------------------------------------------------------
 */
  if( mmEntStat.curCmd NEQ AT_CMD_NONE )

    return( AT_BUSY );

/*
 *-------------------------------------------------------------------
 * process the start index parameter in case of a network search
 *-------------------------------------------------------------------
 */

  return(get_available_network_list(srcId, AT_CMD_COPS, startIdx, lastIdx, operLst));

}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-PS (6147)         MODULE  : CMH_MMT                  |
| STATE   : code                  ROUTINE : tAT_PercentNRG             |
+--------------------------------------------------------------------+

  PURPOSE : This is the functional counterpart to the %NRG=?
*/

GLOBAL T_ACI_RETURN tAT_PercentNRG  ( T_ACI_CMD_SRC srcId, T_ACI_NRG *NRG_options)
{
  
  TRACE_FUNCTION ("tAT_PercentNRG()");

/*
 *-------------------------------------------------------------------
 * check command source
 *-------------------------------------------------------------------
 */
  if(!cmh_IsVldCmdSrc (srcId))
  {
    ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
    return( AT_FAIL );
  }

/*
 *-------------------------------------------------------------------
 * check entity status
 *-------------------------------------------------------------------
 */
  if( mmEntStat.curCmd NEQ AT_CMD_NONE )
  {
    TRACE_EVENT("mmEntStat.curCmd NEQ AT_CMD_NONE");
    return( AT_BUSY );
  }
/*
 * The response depends upon the value of the PLMN Mode bit.
 */

  NRG_options->reg_mode = NRG_REG_NotPresent;
  NRG_options->srv_mode = NRG_SRV_NotPresent;
  NRG_options->opr_frmt = NRG_OPR_NotPresent;

  NRG_options->srv_mode = (NRG_options->srv_mode | NRG_SRV_Full | NRG_SRV_Limited | NRG_SRV_NoSrv | NRG_SRV_SetRegModeOnly);
  NRG_options->opr_frmt = (NRG_options->opr_frmt | NRG_OPR_Long | NRG_OPR_Short | NRG_OPR_Numeric);
  NRG_options->reg_mode = (NRG_options->reg_mode | NRG_REG_Auto);
  
  if(cmhSIM_isplmnmodebit_set())
  {
    NRG_options->reg_mode = (NRG_options->reg_mode | NRG_REG_Manual | NRG_REG_Both);
  }
    
  return(AT_CMPL);

}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-PS (6147)         MODULE  : CMH_MMT                  |
| STATE   : code                  ROUTINE : tAT_PercentCOPS             |
+--------------------------------------------------------------------+

  PURPOSE : This is the functional counterpart to the %COPS=? AT command
            which is responsible to test for all available network
            operators.

            <startIdx>: start index for reading the list.
            <lastIdx> : last index buffers the last read index of the
                        list
            <operLst> : list buffer to copy MAX_OPER entries into.
*/

GLOBAL T_ACI_RETURN tAT_PercentCOPS  ( T_ACI_CMD_SRC srcId,
                                    SHORT startIdx,
                                    SHORT * lastIdx,
                                    T_ACI_COPS_OPDESC * operLst)
{

  TRACE_FUNCTION ("tAT_PercentCOPS()");

/*
 *-------------------------------------------------------------------
 * check command source
 *-------------------------------------------------------------------
 */
  if(!cmh_IsVldCmdSrc (srcId))
  {
    ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
    return( AT_FAIL );
  }

/*
 *-------------------------------------------------------------------
 * check entity status
 *-------------------------------------------------------------------
 */
  if( mmEntStat.curCmd NEQ AT_CMD_NONE )

    return( AT_BUSY );

/*
 *-------------------------------------------------------------------
 * process the start index parameter in case of a network search
 *-------------------------------------------------------------------
 */

   return(get_available_network_list(srcId, AT_CMD_P_COPS, startIdx, lastIdx, operLst));

}


/*
+--------------------------------------------------------------------+
| PROJECT : GSM-PS (6147)         MODULE  : CMH_MMT                  |
| STATE   : code                  ROUTINE : get_available_network_list|
+--------------------------------------------------------------------+

  PURPOSE : This is common function for +COPS and %COPS test functions.
*/

LOCAL T_ACI_RETURN get_available_network_list  ( T_ACI_CMD_SRC srcId,
                                                  T_ACI_AT_CMD cmd,
                                                  SHORT startIdx,
                                                  SHORT * lastIdx,
                                                  T_ACI_COPS_OPDESC * operLst)
{
  UBYTE          lstIdx;       /* holds list index */
  SHORT          mcc, mnc;     /* holds converted mnc and mcc */
  T_ACI_RETURN   retCd;        /* holds return code */

  TRACE_FUNCTION ("get_available_network_list()");

/*
 *-------------------------------------------------------------------
 * process the start index parameter in case of a network search
 *-------------------------------------------------------------------
 */
  if(!cmhSIM_isplmnmodebit_set())
  {
    ACI_ERR_DESC( ACI_ERR_CLASS_Cme, CME_ERR_OpNotAllow );
    return( AT_FAIL );
  }
  
  if( startIdx EQ 0 )
  {
    mmEntStat.curCmd  = cmd;
    mmEntStat.entOwn  = mmShrdPrm.owner = srcId;

#if defined (GPRS) AND defined (DTI) 
    if( psaG_MM_CMD_NET_SRCH ( ) < 0 )  /* search for network */
#else
    if( psaMM_NetSrch () < 0 )  /* search for network */
#endif
    {
      TRACE_EVENT( "FATAL RETURN psaMM_NetSrch in COPS" );
      ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Internal );
      return( AT_FAIL );
    }

    retCd = AT_EXCT;
  }
  else
  {
    /*
     * For g23m, it makes no sense to support a startIdx different from zero
     * as MM only delivers GMMREG_MAX_PLMN_ID PLMNs which is identical to
     * MAX_PLMN_ID. So the MMI already gets all the desired information 
     * by the callback rAT_PlusCOPS().
     * For other programs like Neptune this maybe different, this is for
     * further study.
     */
    ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
    return( AT_FAIL );
  }

/*
 *-------------------------------------------------------------------
 * log command execution
 *-------------------------------------------------------------------
 */
#if defined SMI OR defined MFW OR defined FF_MMI_RIV
  {
  T_ACI_CLOG     cmdLog;       /* holds logging info */
  cmdLog.atCmd                  = cmd;
  cmdLog.cmdType                = CLOG_TYPE_Test;
  cmdLog.retCode                = retCd;
  cmdLog.cId                    = ACI_NumParmNotPresent;
  cmdLog.sId                    = ACI_NumParmNotPresent;
  cmdLog.cmdPrm.tCOPS.srcId     = srcId;
  cmdLog.cmdPrm.tCOPS.startIdx  = startIdx;
  cmdLog.cmdPrm.tCOPS.lastIdx   = lastIdx;
  cmdLog.cmdPrm.tCOPS.operLst   = operLst;

  rAT_PercentCLOG( &cmdLog );
  }
#endif
  return( retCd );
}

/*==== EOF ========================================================*/