FreeCalypso > hg > fc-magnetite
view cdg211/cdginc/p_dio.val @ 307:6d1eac845d3e
make it possible to enable SERIAL_DYNAMIC_SWITCH on the configure.sh line
| author | Mychaela Falconia <falcon@freecalypso.org> |
|---|---|
| date | Thu, 02 Nov 2017 05:49:53 +0000 |
| parents | 56abf6cf8a0b |
| children |
line wrap: on
line source
/* +--------------------------------------------------------------------------+ | PROJECT : PROTOCOL STACK | | FILE : p_dio.val | | SOURCE : "__out__\g23m_dfile\prim\dio.pdf" | | LastModified : "2004-03-19" | | IdAndVersion : "..." | | SrcFileTime : "Tue Jul 19 13:38:38 2005" | | Generated by CCDGEN_2.5.5 on Fri Jun 08 13:59:14 2007 | | !!DO NOT MODIFY!!DO NOT MODIFY!!DO NOT MODIFY!! | +--------------------------------------------------------------------------+ */ /* PRAGMAS * PREFIX : NONE * COMPATIBILITY_DEFINES : NO (require PREFIX) * ALWAYS_ENUM_IN_VAL_FILE: NO * ENABLE_GROUP: NO * CAPITALIZE_TYPENAME: NO */ #ifndef P_DIO_VAL #define P_DIO_VAL #define CDG_ENTER__P_DIO_VAL #define CDG_ENTER__FILENAME _P_DIO_VAL #define CDG_ENTER__P_DIO_VAL__FILE_TYPE CDGINC #define CDG_ENTER__P_DIO_VAL__LAST_MODIFIED _2004_03_19 #define CDG_ENTER__P_DIO_VAL__ID_AND_VERSION _ #define CDG_ENTER__P_DIO_VAL__SRC_FILE_TIME _Tue_Jul_19_13_38_38_2005 #include "CDG_ENTER.h" #undef CDG_ENTER__P_DIO_VAL #undef CDG_ENTER__FILENAME /* * Value constants for VAL_baud_rate */ #define DIO4_BAUD_RESERVED (0x0) /* reserved value */ #define DIO4_BAUD_AUTO (0x1) /* Automatic detected */ #define DIO4_BAUD_75 (0x2) /* Transmission rate of 75 bits/sec */ #define DIO4_BAUD_110 (0x4) /* Transmission rate of 110 bits/sec */ #define DIO4_BAUD_150 (0x8) /* Transmission rate of 150 bits/sec */ #define DIO4_BAUD_300 (0x10) /* Transmission rate of 300 bits/sec */ #define DIO4_BAUD_600 (0x20) /* Transmission rate of 600 bits/sec */ #define DIO4_BAUD_1200 (0x40) /* Transmission rate of 1200 bits/sec */ #define DIO4_BAUD_2400 (0x80) /* Transmission rate of 2400 bits/sec */ #define DIO4_BAUD_4800 (0x100) /* Transmission rate of 4800 bits/sec */ #define DIO4_BAUD_7200 (0x200) /* Transmission rate of 7200 bits/sec */ #define DIO4_BAUD_9600 (0x400) /* Transmission rate of 9600 bits/sec */ #define DIO4_BAUD_14400 (0x800) /* Transmission rate of 14400 bits/sec */ #define DIO4_BAUD_19200 (0x1000) /* Transmission rate of 19200 bits/se */ #define DIO4_BAUD_28800 (0x2000) /* Transmission rate of 28800 bits/se */ #define DIO4_BAUD_33900 (0x4000) /* Transmission rate of 33900 bits/se */ #define DIO4_BAUD_38400 (0x8000) /* Transmission rate of 38400 bits/se */ #define DIO4_BAUD_57600 (0x10000) /* Transmission rate of 57600 bits/se */ #define DIO4_BAUD_115200 (0x20000) /* Transmission rate of 115200 bits/se */ #define DIO4_BAUD_203125 (0x40000) /* Transmission rate of 203125 bits/se */ #define DIO4_BAUD_230400 (0x80000) /* Transmission rate of 230400 bits/se */ #define DIO4_BAUD_406250 (0x100000) /* Transmission rate of 406250 bits/se */ #define DIO4_BAUD_460800 (0x200000) /* Transmission rate of460800 bits/se */ #define DIO4_BAUD_812500 (0x400000) /* Transmission rate of 812500 bits/se */ #define DIO4_BAUD_921600 (0x800000) /* Transmission rate of 921600 bits/se */ /* * Value constants for VAL_dev_type */ #define DIO_DATA_MUX (0x200000) /* device can start a multiplexer */ #define DIO_DATA_PKT (0x400000) /* device can contain packet data */ #define DIO_DATA_SER (0x800000) /* device can contain serial data */ #define DIO_DATA_SER_MUX (0xa0000) /* serial device which can start a multiplexer */ #define DIO_TYPE_ID_MASK (0xff00) /* mask for dio identifier to separate different capability structs with the same combination */ #define DIO_TYPE_DAT_MASK (0xff0000) /* mask for dio identifier to separate kind of data support */ #define DIO_TYPE_SER (0x800100) /* Type for serial devices like UART */ #define DIO_TYPE_SER_MUX (0xa00100) /* Type for serial devices like UART. It is possible to start a 27.010 multiplexer on devices of this type */ #define DIO_TYPE_PKT (0x400100) /* Type for packet devices */ /* * Value constants for VAL_char_frame */ #define DIO_CF_8N2 (0x1) /* 8 data bits; no parity bit; 2 stop bits */ #define DIO_CF_8O1 (0x2) /* 8 data bits; odd parity bit; 1 stop bits */ #define DIO_CF_8E1 (0x4) /* 8 data bits; even parity bit; 1 stop bits */ #define DIO_CF_8M1 (0x8) /* 8 data bits; mark parity bit; 1 stop bits */ #define DIO_CF_8S1 (0x10) /* 8 data bits; space parity bit; 1 stop bits */ #define DIO_CF_8N1 (0x20) /* 8 data bits; no parity bit; 1 stop bits */ #define DIO_CF_7N2 (0x40) /* 7 data bits; no parity bit; 2 stop bits */ #define DIO_CF_7O1 (0x80) /* 7 data bits; odd parity bit; 1 stop bits */ #define DIO_CF_7E1 (0x100) /* 7 data bits; even parity bit; 1 stop bits */ #define DIO_CF_7M1 (0x200) /* 7 data bits; mark parity bit; 1 stop bits */ #define DIO_CF_7S1 (0x400) /* 7 data bits; space parity bit;1 stop bits */ #define DIO_CF_7N1 (0x800) /* 7 data bits; no parity bit; 1 stop bits */ /* * Value constants for VAL_flow_control */ #define DIO_FLOW_NONE (0x1) /* Data transmit: None Data receive: None */ #define DIO_FLOW_NO_XOFF (0x2) /* Data transmit: None Data receive: XON/XOFF */ #define DIO_FLOW_NO_CTS (0x4) /* Data transmit: None Data receive: CTS */ #define DIO_FLOW_XON_NO (0x8) /* Data transmit: local XON/XOFF Data receive: None */ #define DIO_FLOW_XON_XOFF (0x10) /* Data transmit: local XON/XOFF Data receive: XON/XOFF */ #define DIO_FLOW_XON_CTS (0x20) /* Data transmit: local XON/XOFF Data receive:CTS */ #define DIO_FLOW_RTS_NO (0x40) /* Data transmit: RTS Data receive: None */ #define DIO_FLOW_RTS_XOFF (0x80) /* Data transmit: RTS Data receive: XON/XOFF */ #define DIO_FLOW_RTS_CTS (0x100) /* Data transmit: RTS Data receive: CTS */ #define DIO_FLOW_XTR_NO (0x200) /* Data transmit: transparent XON/XOFF Data receive: None */ #define DIO_FLOW_XTR_XOFF (0x400) /* Data transmit: transparent XON/XOFF Data receive: CTS */ #define DIO_FLOW_XTR_CTS (0x800) /* Data transmit: transparent XON/XOFF Data receive: CTS */ /* * Value constants for VAL_line_states */ #define LINE_STD_DCD_ON (0x1) /* b00000001 set line DCD on */ #define LINE_STD_DCD_OFF (0x2) /* b00000010 set line DCD off */ #define LINE_STD_RING_ON (0x4) /* b00000100 set line RING on */ #define LINE_STD_RING_OFF (0x8) /* b00001000 set line RING off */ #define LINE_STD_ESCD_IND (0x10) /* b00010000 escape sequence indication */ #define LINE_STD_DTR_LDR (0x20) /* b00100000 DTR line drop indication */ /* * Value constants for VAL_ser_flags */ #define DIO_FLAG_SER_ESC (0x80000000)/* device supports escape sequence detection */ /* * Value constants for VAL_device */ #define DIO_DRV_MASK (0xff000000)/* mask for driver number to identify the driver */ #define DIO_TYPE_MASK (0xffff00) /* mask for device type */ #define DIO_DEVICE_MASK (0xff) /* mask for actual device number chosen by the driver */ #define DIO_DRV_UART (0x0) /* UART driver */ #define DIO_DRV_USB (0x1000000)/* USB driver */ #define DIO_DRV_MUX (0x2000000)/* 27.010 multiplexer driver */ #define DIO_DRV_PKT (0x3000000)/* packet driver */ #define DIO_DRV_MCBSP (0x4000000)/* McBSP driver */ #define DIO_DRV_APP (0x5000000)/* Application adapter */ #define DIO_DRV_BAT (0x6000000)/* Binary Interface Adapter */ /* * Value constants for VAL_dev_flag */ #define DIO_FLAG_SLEEP (0x80000000)/* device provides the feature power saving state */ /* * Value constants for VAL_mux_mode */ #define DIO_MUX_BASIC (0x1) /* mux supports Basic option */ #define DIO_MUX_UIH (0x2) /* mux supports Advanced option with UIH frames */ #define DIO_MUX_UI (0x4) /* mux supports Advanced option with UI frames */ #define DIO_MUX_I (0x8) /* mux supports Advanced option with I frames (error recovery) */ /* * Value constants for VAL_contr_type */ #define DIO4_CTRL_LINES (0x1) /* control struct contains serial line states */ #define DIO4_CTRL_MUX (0x2) /* control struct contains mux control parameter */ /* * Value constants for VAL_dev_mode */ #define DIO_MODE_SER (0x1) /* device acts as serial device */ #define DIO_MODE_MUX (0x2) /* device acts as 27.010 mux device */ /* * Value constants for VAL_esc_char */ #define ESC_CHAR_DEFAULT (0x2b) /* default escape character ('+') */ /* * Value constants for VAL_guard_per */ #define DIO_ESC_OFF (0x0) /* turn escape sequence detection off */ #define DIO_GUARD_PER_DEFAULT (0x3e8) /* default value 1000ms */ /* * Value constants for VAL_k */ #define K_DEFAULT (0x2) /* k default value */ /* * Value constants for VAL_n1 */ #define MUX_N1_BASIC_DEFAULT (0x1f) /* default value for the basic option */ #define MUX_N1_ADVANCED_DEFAULT (0x40) /* default value for the advanced option */ /* * Value constants for VAL_n2 */ #define MUX_N2_DEFAULT (0x3) /* default number of retransmission */ /* * Value constants for VAL_sleep_mode */ #define DIO_SLEEP_ENABLE (0x1) /* enter sleep mode if possible */ #define DIO_SLEEP_DISABLE (0x2) /* do not enter sleep mode */ /* * Value constants for VAL_cb_line_state */ #define DIO_SA (0x80000000)/* read/write: device ready */ #define DIO_SB (0x40000000)/* read/write: data valid */ #define DIO_X (0x20000000)/* read/write: flow control */ #define DIO_RING (0x10000000)/* write: RING indicator */ #define DIO_ESC (0x8000000)/* read: escape seqence detected */ #define DIO_MUX_STOPPED (0x4000000)/* multiplexer stopped */ #define DIO_BRK (0x2000000)/* read/write: break received/to be send */ #define DIO_BRKLEN_MASK (0xff) /* read/write: length of break signal in character; only valid if DIO_BREAK bit is set to 1 */ /* * Value constants for VAL_t1 */ #define MUX_T1_DEFAULT (0xa) /* default acknowledgement timer (100ms) */ /* * Value constants for VAL_t2 */ #define MUX_T2_DEFAULT (0x1e) /* default response timer */ /* * Value constants for VAL_t3 */ #define MUX_T3_DEFAULT (0xa) /* default wake up response timer (100ms) */ /* * Value constants for VAL_xoff */ #define XOFF_DEFAULT (0x13) /* xoff default value */ /* * Value constants for VAL_xon */ #define XON_DEFAULT (0x11) /* xon default value */ /* * Value constants for VAL_start_mux */ #define DIO_MUX_DYNAMIC (0x0) /* Do not start the 27.010 multiplexer immediately. The multi-plexer may be started dynamically on runtime */ #define DIO_MUX_START (0x1) /* Starts the 27.010 multiplexer permanently. The multiplexer can not be turned off during runtime */ #include "CDG_LEAVE.h" #endif