view cdg3/sap/mnlc.sap @ 307:6d1eac845d3e

make it possible to enable SERIAL_DYNAMIC_SWITCH on the configure.sh line
author Mychaela Falconia <falcon@freecalypso.org>
date Thu, 02 Nov 2017 05:49:53 +0000
parents c15047b3d00d
children
line wrap: on
line source

<?xml version="1.0" encoding="UTF-8"?>
<!-- edited with SAPE SAP Editor -->
<SAP xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="sap.xsd">
    <DocInfoSection>
        <DocName DocType="SAP">mnlc</DocName>
        <DocNum Number="104" Project="8443"/>
        <Description>
            <Section>This section contains general information on MNLC SAP</Section>
        </Description>
        <DocHistory>
            <DocVersion Number="001" Year="02"/>
            <Date Day="8" Month="10" Year="2002"/>
            <Author>MNC</Author>
            <DocStatus State="SUBMITTED"/>
            <Comment>Initial version.</Comment>
        </DocHistory>
        <DocHistory>
            <DocVersion Number="002" Year="02"/>
            <Date Day="8" Month="10" Year="2002"/>
            <Author>MNC</Author>
            <DocStatus State="SUBMITTED"/>
            <Comment>Prepared for review</Comment>
        </DocHistory>
        <DocHistory>
            <DocVersion Number="003" Year="02"/>
            <Date Day="25" Month="10" Year="2002"/>
            <Author>TML</Author>
            <DocStatus State="SUBMITTED"/>
            <Comment>Made constant MAX_CALLED_BCD_NO_LENGTH unique</Comment>
        </DocHistory>
    </DocInfoSection>
    <ConstantsSection>
        <Description>
            <Section>This section contains all constants that are defined for the MNLC SAP</Section>
        </Description>
        <Constant>
            <Alias>L_MAX_CALLED_BCD_NO_LENGTH</Alias>
            <Value ValueType="DEC">10</Value>
            <Comment>Max Bcd number length (digits)</Comment>
        </Constant>
        <Constant>
            <Alias>CURSOR_SMS_TEXT_140</Alias>
            <Value ValueType="DEC">140</Value>
            <Comment>Position SMS Message</Comment>
        </Constant>
        <History>
            <Date Day="16" Month="9" Year="2002"/>
            <Author>MNC</Author>
            <Comment>Initial</Comment>
        </History>
    </ConstantsSection>
    <PrimitivesSection PrimIDType="BIT32" SAPid="68">
        <Description>
            <Section>This section contains all primitives that are defined for the MNLC SAP</Section>
        </Description>
        <Primitive>
            <Description>
                <Section>The MNLC_SMS_MEAS_REQ primitive is used to start a position request to the LC controller.</Section>
            </Description>
            <PrimDef>
                <Name>MNLC_SMS_MEAS_REQ</Name>
                <PrimID Direction="UPLINK" Number="0"/>
                <PrimUsage>
                    <Sender>ACI</Sender>
                    <Receiver>LC</Receiver>
                </PrimUsage>
            </PrimDef>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">mnlc</DocName>
                    <Name>reference</Name>
                </ItemLink>
                <Comment>Reference SMS request</Comment>
            </PrimItem>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">mnlc</DocName>
                    <Name>called_party_bcd_num</Name>
                </ItemLink>
                <Comment>Called Bcd Number</Comment>
            </PrimItem>
            <History>
                <Date Day="16" Month="9" Year="2002"/>
                <Author>MNC</Author>
                <Comment>Initial</Comment>
            </History>
        </Primitive>
        <Primitive>
            <Description>
                <Section>The MNLC_SMS_MEAS_CNF primitive transport the position data from the LC controller to ACI.</Section>
            </Description>
            <PrimDef>
                <Name>MNLC_SMS_MEAS_CNF</Name>
                <PrimID Direction="DOWNLINK" Number="0"/>
                <PrimUsage>
                    <Sender>LC</Sender>
                    <Receiver>ACI</Receiver>
                </PrimUsage>
            </PrimDef>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">mnlc</DocName>
                    <Name>reference</Name>
                </ItemLink>
                <Comment>Reference SMS request</Comment>
            </PrimItem>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">mnlc</DocName>
                    <Name>data_valid</Name>
                </ItemLink>
                <Comment>Cursor Data Valid</Comment>
            </PrimItem>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">mnlc</DocName>
                    <Name>sms_text</Name>
                </ItemLink>
                <Control>[CURSOR_SMS_TEXT_140]</Control>
                <Comment>Cursor SMS</Comment>
            </PrimItem>
            <History>
                <Date Day="16" Month="9" Year="2002"/>
                <Author>MNC</Author>
                <Comment>Initial</Comment>
            </History>
        </Primitive>
    </PrimitivesSection>
    <PrimStructElementsSection>
        <Description>
            <Section>This section contains all structured elements that are defined for the MNLC SAP</Section>
        </Description>
        <PrimStructElem>
            <Description>
                <Section>The parameter defines the called Bcd number.</Section>
            </Description>
            <PrimStructElemDef Type="STRUCT">
                <Name>called_party_bcd_num</Name>
                <Comment>called Party Bcd number</Comment>
            </PrimStructElemDef>
            <PrimStructElemItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">mnlc</DocName>
                    <Name>number_length</Name>
                </ItemLink>
                <Comment>Number Length</Comment>
            </PrimStructElemItem>
            <PrimStructElemItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">mnlc</DocName>
                    <Name>bcd</Name>
                </ItemLink>
                <Control>[L_MAX_CALLED_BCD_NO_LENGTH]</Control>
                <Comment>Bcd Number</Comment>
            </PrimStructElemItem>
            <History>
                <Date Day="16" Month="9" Year="2002"/>
                <Author>MNC</Author>
                <Comment>Initial</Comment>
            </History>
        </PrimStructElem>
    </PrimStructElementsSection>
    <PrimBasicElementsSection>
        <Description>
            <Section>This section contains all basic elements that are defined for the MNLC SAP</Section>
        </Description>
        <PrimBasicElem>
            <Description>
                <Section>This parameter specifies the identification number for call.</Section>
            </Description>
            <PrimBasicElemDef>
                <Name>reference</Name>
                <Type>U16</Type>
                <Comment>Reference</Comment>
            </PrimBasicElemDef>
            <History>
                <Date Day="16" Month="9" Year="2002"/>
                <Author>MNC</Author>
                <Comment>Initial</Comment>
            </History>
        </PrimBasicElem>
        <PrimBasicElem>
            <Description>
                <Section>The parameter defines the called Bcd number.</Section>
            </Description>
            <PrimBasicElemDef>
                <Name>bcd</Name>
                <Type>U8</Type>
                <Comment>Bcd Number</Comment>
            </PrimBasicElemDef>
            <History>
                <Date Day="16" Month="9" Year="2002"/>
                <Author>MNC</Author>
                <Comment>Initial</Comment>
            </History>
        </PrimBasicElem>
        <PrimBasicElem>
            <Description>
                <Section>The parameter defines if the calculated data is valid or not.</Section>
            </Description>
            <PrimBasicElemDef>
                <Name>data_valid</Name>
                <Type>U8</Type>
                <Comment>Cursor Data Valid</Comment>
            </PrimBasicElemDef>
            <ValuesLink>
                <DocName DocType="SAP">mnlc</DocName>
                <Name>VAL_data_valid</Name>
            </ValuesLink>
            <History>
                <Date Day="16" Month="9" Year="2002"/>
                <Author>MNC</Author>
                <Comment>Initial</Comment>
            </History>
        </PrimBasicElem>
        <PrimBasicElem>
            <Description>
                <Section>The parameter defines the number of decimal digits in the Bcd number</Section>
            </Description>
            <PrimBasicElemDef>
                <Name>number_length</Name>
                <Type>U8</Type>
                <Comment>Number of decimal digits in the Bcd number</Comment>
            </PrimBasicElemDef>
            <History>
                <Date Day="16" Month="9" Year="2002"/>
                <Author>MNC</Author>
                <Comment>Initial</Comment>
            </History>
        </PrimBasicElem>
        <PrimBasicElem>
            <Description>
                <Section>The parameter defines the SMS text</Section>
            </Description>
            <PrimBasicElemDef>
                <Name>sms_text</Name>
                <Type>U8</Type>
                <Comment>SMS text</Comment>
            </PrimBasicElemDef>
            <History>
                <Date Day="16" Month="9" Year="2002"/>
                <Author>MNC</Author>
                <Comment>Initial</Comment>
            </History>
        </PrimBasicElem>
    </PrimBasicElementsSection>
    <ValuesSection>
        <Description>
            <Section>This section contains all sets of values that are defined for the MNLC SAP</Section>
        </Description>
        <Values>
            <Description>
                <Section>This former local values table was generated by the doc2XML converter tool. Please exchange this description by a more meaningful one !!!</Section>
            </Description>
            <ValuesDef>
                <Name>VAL_data_valid</Name>
                <Comment>values for data_valid</Comment>
            </ValuesDef>
            <ValuesItem>
                <Value ValueType="DEC">0</Value>
                <Alias>DATA_VALID</Alias>
                <Comment/>
            </ValuesItem>
            <ValuesItem>
                <Value ValueType="DEC">1</Value>
                <Alias>DATA_INVALID</Alias>
                <Comment/>
            </ValuesItem>
            <History>
                <Date Day="4" Month="11" Year="2003"/>
                <Author>doc2XML</Author>
                <Comment>Initial</Comment>
            </History>
        </Values>
    </ValuesSection>
</SAP>