FreeCalypso > hg > fc-magnetite
view cdg211/prim/8010_152_PS_Include.pdf @ 230:7129e312b2ab
l1_custom_int.lib rebuilt from source for the l1reconst config
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Sun, 12 Mar 2017 19:45:22 +0000 (2017-03-12) |
parents | 56abf6cf8a0b |
children |
line wrap: on
line source
;******************************************************************************** ;*** File : 8010_152_ps_include.pdf ;*** Creation : Fri Jun 08 13:57:12 CST 2007 ;*** XSLT Processor : Apache Software Foundation / http://xml.apache.org/xalan-j / supports XSLT-Ver: 1 ;*** Copyright : (c) Texas Instruments AG, Berlin Germany 2002 ;******************************************************************************** ;*** Document Type : Service Access Point Specification ;*** Document Name : 8010_152_ps_include ;*** Document No. : 8010.152.02.023 ;*** Document Date : 2003-10-15 ;*** Document Status: APPROVED ;*** Document Author: LOE ;******************************************************************************** PRAGMA SRC_FILE_TIME "Tue May 18 17:03:04 2004" PRAGMA LAST_MODIFIED "2003-10-15" PRAGMA ID_AND_VERSION "8010.152.02.023" PRAGMA PREFIX PS ; Prefix for this document PRAGMA ALLWAYS_ENUM_IN_VAL_FILE YES ; Enumeration values in value file PRAGMA ENABLE_GROUP NO ; Enable h-file grouping PRAGMA COMPATIBILITY_DEFINES NO ; Compatible to the old #defines CONST BCC_MAX 7 ; Maximum value of BCC CONST SIZE_TMSI 4 ; Size in bytes of Temporary Mobile Subscriber Identity (TMSI) CONST SIZE_P_TMSI 4 ; Size in bytes of Packet Temporary Mobile Subscriber Identity (P-TMSI) CONST CPICH_RSCP_MAX -25 ; Maximum value of CPICH RSCPs for a UMTS cell is -25 dBm CONST CPICH_RSCP_MIN -115 ; Minimum value of CPICH RSCPs for a UMTS cell is -115 dBm CONST SIZE_KC 8 ; Size in bytes of Ciphering Key CONST MAX_EQUIVALENT_PLMNS 5 ; Maximum number of equivalent PLMNs CONST MAX_FORBIDDEN_LAI 10 ; Maximum number of forbidden location areas in a forbidden location area list. CONST MAX_GSM_NCELLS 32 ; Maximum number if GSM neighbour cells when camped on a UMTS cell for dual mode operations (see [3G 25.331]). CONST MAX_GSM_NCELL_INDEX 31 ; Maximum value of a GSM neighbour cell index for indexing a cell in a GSM neighbour cell list when camped on a UMTS cell for dual mode operations. CONST MAX_UMTS_NCELLS 64 ; Maximum number of UMTS FDD neighbour cells on one UARFCN when camped on a GSM cell for dual mode operations (see [3G 05.08]). CONST MAX_UMTS_NCELLS_PER_UARFCN 32 ; Maximum number of UMTS FDD neighbour cells one frequency when camped on a GSM cell for dual mode operations (see [3G 05.08]). CONST MAX_UMTS_NCELL_UARFCNS 3 ; Maximum number of UMTS FDD channels on which neighbour cells can exist CONST MAX_UMTS_PRECONFIGURATIONS 16 ; Maximum number of UMTS pre-configurations CONST NCC_MAX 7 ; Maximum value of NCC cell CONST PSC_MAX 0x01FF ; Maximum value of Primary Scrambling Code CONST PSC_MIN 0x0000 ; Minimum value of Primary Scrambling Code CONST SIZE_ACC 2 ; Number of bytes used to contain the EFACC of the (U)SIM, see [3G 11.11] and [3G 31.102]. CONST SIZE_AI 2 ; Number of bytes used to contain Additional Information from EFAD of the (U)SIM, see [3G 11.11] and [3G 31.102]. CONST SIZE_IMSI_MAX 15 ; Maximum number of digits in an IMSI CONST SIZE_IMSI_MIN 6 ; Minimum number of digits in an IMSI CONST SIZE_LAC 2 ; Minimum size of location area information CONST SIZE_MCC 3 ; Size in bytes of mobile country code. CONST SIZE_MNC_MAX 3 ; Three digit (byte) mobile network code CONST SIZE_MNC_MIN 2 ; Two digit (byte) mobile network code CONST MAX_START_VALUE 0xFFFFF ; Maximum value of START parameter CONST SIZE_CK 0x0010 ; Number of bytes used to contain the Ciphering Key from EFKEYS of the (U)SIM, see [3G 11.11] and [3G 31.102]. CONST SIZE_IK 0x0010 ; Number of bytes used to contain the Integrity Key from EFKEYS of the (U)SIM, see [3G 11.11] and [3G 31.102]. CONST SIZE_CN_COMMON_GSM_NAS_SI 0x0008 ; Number of bytes used to contain a CN Common GSM NAS System Information IE from a network cell [3G 25.331] CONST MAX_UL_SDU 255 ; Max number of unacknowledged SDUs transferred between RATs. CONST MIN_BCD_VALUE 0 ; Minimum value of a BCD digit according to [3G 24.008]. CONST MAX_BCD_VALUE 9 ; Maximum value of a BCD digit according to [3G 24.008]. CONST MIN_KEY_SEQ_NUM 0x00 ; Minimum value of ciphering key sequence number. CONST MAX_KEY_SEQ_NUM 0x06 ; Maximum value of ciphering key sequence number. CONST KEY_SEQ_INVALID 0x07 ; Corresponds to ciphering key not available, see [3G 24.008] [3G 11.11] and [3G 31.102]. CONST MIN_ARFCN_VALUE 0 ; ARFCN range, see [3G 05.05] CONST MAX_ARFCN_VALUE 1023 ; ARFCN range, see [3G 05.05] CONST MIN_ARFCN_GSM900E_LOW 0 ; ARFCN range, see [3G 05.05] CONST MAX_ARFCN_GSM900E_LOW 124 ; ARFCN range, see [3G 05.05] CONST MIN_ARFCN_GSM900E_HIGH 975 ; ARFCN range, see [3G 05.05] CONST MAX_ARFCN_GSM900E_HIGH 1023 ; ARFCN range, see [3G 05.05] CONST MIN_ARFCN_GSM900P 1 ; ARFCN range, see [3G 05.05] CONST MAX_ARFCN_GSM900P 124 ; ARFCN range, see [3G 05.05] CONST MIN_ARFCN_GSM850 128 ; ARFCN range, see [3G 05.05] CONST MAX_ARFCN_GSM850 251 ; ARFCN range, see [3G 05.05] CONST MIN_ARFCN_GSM450 259 ; ARFCN range, see [3G 05.05] CONST MAX_ARFCN_GSM450 293 ; ARFCN range, see [3G 05.05] CONST MIN_ARFCN_GSM480 306 ; ARFCN range, see [3G 05.05] CONST MAX_ARFCN_GSM480 340 ; ARFCN range, see [3G 05.05] CONST MIN_ARFCN_GSM1800 512 ; ARFCN range, see [3G 05.05] CONST MAX_ARFCN_GSM1800 885 ; ARFCN range, see [3G 05.05] CONST MIN_ARFCN_GSM1900 512 ; ARFCN range, see [3G 05.05] CONST MAX_ARFCN_GSM1900 810 ; ARFCN range, see [3G 05.05] CONST MIN_RSSI_GSM -110 ; Minimum GSM RSSI in dBm. CONST MAX_RSSI_GSM -20 ; Maximum GSM RSSI in dBm. CONST MIN_RSSI_UMTS -48 ; Minimum UMTS RSSI in 0.5 dBm units. CONST MAX_RSSI_UMTS 0 ; Maximum UMTS RSSI in 0.5 dBm units. CONST MIN_UARFCN 0x0000 ; UARFCN range, see [3G 25.101] CONST MAX_UARFCN 0x3FFF ; UARFCN range, see [3G 25.101] VALTAB VAL_content VAL 0x00 ACC_INDEX_CLASSES_8_TO_15 "Index to use in content array for classes 8 to 15" VAL 0x01 ACC_INDEX_CLASSES_0_TO_7 "Index to use in content array for classes 0 to 7" VAL 0x01 ACC_MASK_CLASS_00 "Mask for accessing access class 0" VAL 0x02 ACC_MASK_CLASS_01 "Mask for accessing access class 1" VAL 0x04 ACC_MASK_CLASS_02 "Mask for accessing access class 2" VAL 0x08 ACC_MASK_CLASS_03 "Mask for accessing access class 3" VAL 0x10 ACC_MASK_CLASS_04 "Mask for accessing access class 4" VAL 0x20 ACC_MASK_CLASS_05 "Mask for accessing access class 5" VAL 0x40 ACC_MASK_CLASS_06 "Mask for accessing access class 6" VAL 0x80 ACC_MASK_CLASS_07 "Mask for accessing access class 7" VAL 0x01 ACC_MASK_CLASS_08 "Mask for accessing access class 8" VAL 0x02 ACC_MASK_CLASS_09 "Mask for accessing access class 9" VAL 0x04 ACC_MASK_CLASS_10 "Mask for accessing access class 10" VAL 0x08 ACC_MASK_CLASS_11 "Mask for accessing access class 11" VAL 0x10 ACC_MASK_CLASS_12 "Mask for accessing access class 12" VAL 0x20 ACC_MASK_CLASS_13 "Mask for accessing access class 13" VAL 0x40 ACC_MASK_CLASS_14 "Mask for accessing access class 14" VAL 0x80 ACC_MASK_CLASS_15 "Mask for accessing access class 15" VALTAB VAL_access_modes VAL 0 GSM_VOICE_ONLY "GSM voice only mode" VAL 1 GSM "GSM voice and data mode" VAL 2 GSM_GPRS "GSM voice and data with GPRS mode" VAL 3 UMTS_FDD "UMTS FDD only mode" VAL 4 GSM_GPRS_UMTS_FDD "GSM voice and data, GPRS and UMTS mode" VALTAB VAL_arfcn_rssi VAL MIN_RSSI_GSM - MAX_RSSI_GSM "Range of averaged received signal strength" VALTAB VAL_attach_detach_allowed VAL 0 ATTACH_DETACH_NOT_ALLOWED "Attach/detach not allowed" VAL 1 ATTACH_DETACH_ALLOWED "Attach/detach allowed" VALTAB VAL_service_level VAL 0x00 LIMITED_SERVICE "Camped on acceptable cell. This indicates that the cell is selected for limited service." VAL 0x01 NORMAL_SERVICE "Camped on suitable cell. This indicates that the cell is selected for normal service." VAL 0x02 NORMAL_SERVICE_OPERATOR_CELL "Camped on a suitable operator cell. This indicates that the cell is selected for normal service, and is reserved for operator use." VALTAB VAL_cn_domain VAL 0x00 CN_DOMAIN_CS "Circuit switched core network domain" VAL 0x01 CN_DOMAIN_PS "Packet switched core network domain" VAL 0x02 CN_DOMAIN_NOT_IMPORTANT "Core network domain not important" VALTAB VAL_cpich_ec_n0 VAL MIN_RSSI_UMTS - MAX_RSSI_UMTS "The CPICH Ec/N0 parameter has a range from -24 to 0 dB in steps of 0.5. The value is multiplied with 2 to avoid using floating-point numbers." VALTAB VAL_cpich_rscp VAL CPICH_RSCP_MIN - CPICH_RSCP_MAX "The range of CPICH RSCP is -115 to -25 dBm in steps of 1." VALTAB VAL_est_service VAL 0x00 SERVICE_SPEECH "CS Speech call" VAL 0x01 SERVICE_MULTIMEDIA "CS Multimedia call" VAL 0x02 SERVICE_FAX "CS Fax call" VAL 0x03 SERVICE_NT_CSD "Non transparent CS data call" VAL 0x04 SERVICE_T_CSD "Transparent CS data call" VAL 0x05 SERVICE_EMERGE "CS emergency speech call" VALTAB VAL_arfcn VAL MIN_ARFCN_VALUE - MAX_ARFCN_VALUE "Range of ARFCN, see [3G 05.05]" VALTAB VAL_gsm_band_priority VAL 0 EU_BAND "EU band has priority" VAL 1 US_BAND "US band has priority" VALTAB VAL_bcc VAL 0 - BCC_MAX "Range of BCC" VALTAB VAL_ncc VAL 0 - NCC_MAX "Range of NCC" VALTAB VAL_gsm_frequency_band VAL 0x0000 GSM_BAND_NOT_SET "No channel numbers." VAL 0x0001 GSM450 "Channel numbers from 259 to 293 for GSM450" VAL 0x0002 GSM480 "Channel numbers from 306 to 340 for GSM480" VAL 0x0004 GSM850 "Channel numbers from 128 to 251 for GSM850" VAL 0x0008 GSM900P "Channel numbers from 1 to 124 for P-GSM900" VAL 0x0010 GSM900E "Channel numbers from 0 to 124, and 975 to 1023 for E-GSM900" VAL 0x0020 GSM1800 "Channel numbers from 512 to 885 for GSM1800" VAL 0x0040 GSM1900 "Channel numbers from 512 to 810 for GSM1900" VAL 0x0039 GSM1800_BAND_INDICATOR "All channel numbers. Channel numbers from 512 to 810 are to be interpreted as GSM1800 channel numbers." VAL 0x0046 GSM1900_BAND_INDICATOR "All channel numbers. Channel numbers from 512 to 810 are to be interpreted as GSM1900 channel numbers." VALTAB VAL_gsm_ncell_index VAL 0 - MAX_GSM_NCELL_INDEX "Range of index" VALTAB VAL_bsic_valid VAL 0x00 BSIC_NOT_VALIDATED "BSIC for the cell on this channel is not validated or not matched to that of the specified cell." VAL 0x01 BSIC_VALIDATED "BSIC for the cell on this channel is validated and matches that of the specified cell." VALTAB VAL_llc_mode VAL 0 LLC_UNACKNOWLEDGED "Unacknowledged SAPI" VAL 1 LLC_ACKNOWLEDGED "Acknowledged SAPI" VALTAB VAL_meas_mode VAL 0 MEASURE_IDLE "Measurements without a configured DCH" VAL 1 MEASURE_DEDICATED "Measurements with a configured DCH" VALTAB VAL_nmo VAL 0 RR_NMO_I "Network mode of operation I, only one Paging channel for both: PCCCH or CCCH" VAL 1 RR_NMO_II "Network mode of operation II, Paging only on CCCH" VAL 2 RR_NMO_III "Network mode of operation III, Paging on CCCH for CS and either on CCCH or on PCCCH for GPRS, if PCCH allocated in the cell" VALTAB VAL_search_mode VAL 0 SEARCH_MODE_AUTO "Automatic network scan" VAL 1 SEARCH_MODE_MAN "Manual network scan" VALTAB VAL_peak_throughput VAL 0 PEAK_THROUGHPUT_SUB "Subscribed/unknown peak throughput" VAL 1 PEAK_1K "Up to 1000 octet/s" VAL 2 PEAK_2K "Up to 2000 octet/s" VAL 4 PEAK_4K "Up to 4000 octet/s" VAL 8 PEAK_8K "Up to 8000 octet/s" VAL 16 PEAK_16K "Up to 16000 octet/s" VAL 32 PEAK_32K "Up to 32000 octet/s" VAL 64 PEAK_64K "Up to 64000 octet/s" VAL 128 PEAK_128K "Up to 128000 octet/s" VAL 256 PEAK_256K "Up to 256000 octet/s" VAL 384 PEAK_384K "Up to 384000 octet/s" VALTAB VAL_t3212 VAL 1 - 255 "(6 * value) minutes" VAL 0 NO_PERIODIC_UPDATE "No periodic updating" VALTAB VAL_mnc VAL MIN_BCD_VALUE - MAX_BCD_VALUE "Range of a MNC digit." VALTAB VAL_mcc VAL MIN_BCD_VALUE - MAX_BCD_VALUE "Range of a MCC digit." VALTAB VAL_rat VAL 0 RAT_GSM "GSM" VAL 1 RAT_UMTS_FDD "UMTS FDD" VALTAB VAL_radio_prio VAL 0 RADIO_PRIO_1 "radio priority 1 (highest)" VAL 1 RADIO_PRIO_2 "radio priority 2" VAL 2 RADIO_PRIO_3 "radio priority 3" VAL 3 RADIO_PRIO_4 "radio priority 4 (lowest)" VALTAB VAL_rel_ind VAL 0 REL_IND_NO "Non-local deactivation" VAL 1 REL_IND_YES "Local deactivation" VALTAB VAL_ksi VAL MIN_KEY_SEQ_NUM - MAX_KEY_SEQ_NUM "Range of sequence number" VAL KEY_SEQ_INVALID "Sequence number value indicating that the key is not present (initial value on (U)SIM)" VALTAB VAL_sapi VAL 0 SAPI_0 "SAPI 0 (GSM only)" VAL 1 SAPI_1 "SAP for MM" VAL 3 SAPI_3 "SAP 1 for SNDCP or SAPI 3 (GSM only)" VAL 5 SAPI_5 "SAP 2 for SNDCP" VAL 7 SAPI_7 "SAP for SMS" VAL 9 SAPI_9 "SAP 3 for SNDCP" VAL 11 SAPI_11 "SAP 4 for SNDCP" VAL 255 SAPI_INVALID "Invalid SAPI identifier" VALTAB VAL_sim_type VAL 0 SIM_PRESENT "SIM present" VAL 1 USIM_PRESENT "USIM present" VALTAB VAL_uarfcn_rssi VAL -100 - -25 "Range of averaged received signal strength in dBm." VALTAB VAL_uarfcn VAL MIN_UARFCN - MAX_UARFCN "UARFCN range, see [3G 25.101]." VALTAB VAL_cell_status VAL 0x00 CELL_STATUS_UNKNOWN "It is not known whether this cell is suitable or acceptable at this time." VAL 0x01 CELL_STATUS_UNACCEPTABLE "The cell is not acceptable or suitable as defined by the criteria in [3G 25.304]" VAL 0x02 CELL_STATUS_ACCEPTABLE "The cell is acceptable as defined by the criteria in [3G 25.304]." VAL 0x03 CELL_STATUS_SUITABLE "The cell is suitable as defined by the criteria in [3G 25.304]" VALTAB VAL_psc VAL PSC_MIN - PSC_MAX "Range og Primary Scrambling Code" VALTAB VAL_threshold VAL 0 - MAX_START_VALUE "The THRESHOLD value is 20 bits long" VALTAB VAL_start_val VAL 0 - MAX_START_VALUE "The START value is max 20 bits" VALTAB VAL_tx_diversity VAL 0x00 TX_DIVERSITY_USED "TX diversity used for a cell" VAL 0x01 TX_DIVERSITY_NOT_USED "TX diversity not used for a cell" VAR content "Content of access control class" B VAL @p_8010_152_ps_include - VAL_content@ VAR access_modes "Supported access modes." B VAL @p_8010_152_ps_include - VAL_access_modes@ VAR op "UE operation mode" B VAR ai "Additional information" B VAR arfcn_rssi "GSM channel RSSI measurement" C VAL @p_8010_152_ps_include - VAL_arfcn_rssi@ VAR attach_detach_allowed "Attach/detach allowed" B VAL @p_8010_152_ps_include - VAL_attach_detach_allowed@ VAR service_level "Cell service level" B VAL @p_8010_152_ps_include - VAL_service_level@ VAR cn_domain "Core network domain identity" B VAL @p_8010_152_ps_include - VAL_cn_domain@ VAR cpich_ec_n0 "UMTS cell measurement value of CPICH Ec/N0" C VAL @p_8010_152_ps_include - VAL_cpich_ec_n0@ VAR cpich_rscp "UMTS cell measurement value of CPICH RSCP" C VAL @p_8010_152_ps_include - VAL_cpich_rscp@ VAR est_service "Establishment service requested" B VAL @p_8010_152_ps_include - VAL_est_service@ VAR arfcn "GSM channel number" S VAL @p_8010_152_ps_include - VAL_arfcn@ VAR gsm_band_priority "GSM band priority" S VAL @p_8010_152_ps_include - VAL_gsm_band_priority@ VAR ncc "NCC" B VAL @p_8010_152_ps_include - VAL_ncc@ VAR bcc "BCC" B VAL @p_8010_152_ps_include - VAL_bcc@ VAR gsm_frequency_band "Frequency band specification" S VAL @p_8010_152_ps_include - VAL_gsm_frequency_band@ VAR gsm_ncell_index "GSM neighbour cell index" B VAL @p_8010_152_ps_include - VAL_gsm_ncell_index@ VAR bsic_valid "BSIC validated" B VAL @p_8010_152_ps_include - VAL_bsic_valid@ VAR identity "Content of IMSI" B VAR key "Ciphering key" B VAR ul_sequence_number "Sequence number of last unacknowledged uplink SDU" B VAR dl_sequence_number "Sequence number of last unacknowledged downlink SDU (used by the network)" B VAR llc_mode "LLC mode" B VAL @p_8010_152_ps_include - VAL_llc_mode@ VAR lac_elements "Location area code element" B VAR meas_mode "Measurement mode" B VAL @p_8010_152_ps_include - VAL_meas_mode@ VAR mem_handle "Memory handle" L VAR nmo "Network mode of operation" B VAL @p_8010_152_ps_include - VAL_nmo@ VAR search_mode "Search mode for network scan" B VAL @p_8010_152_ps_include - VAL_search_mode@ VAR content_p_tmsi "Content of P-TMSI" B VAR peak_throughput "Peak throughput QoS parameter" S VAL @p_8010_152_ps_include - VAL_peak_throughput@ VAR t3212 "Periodic updating timer" B VAL @p_8010_152_ps_include - VAL_t3212@ VAR mcc "Mobile country code" B VAL @p_8010_152_ps_include - VAL_mcc@ VAR mnc "Mobile network code" B VAL @p_8010_152_ps_include - VAL_mnc@ VAR rat "Radio access technology" B VAL @p_8010_152_ps_include - VAL_rat@ VAR radio_prio "Radio priority" B VAL @p_8010_152_ps_include - VAL_radio_prio@ VAR rel_ind "Local Release Indicator" B VAL @p_8010_152_ps_include - VAL_rel_ind@ VAR rac "Container for packet switched routing area code" B VAR ksi "Key set identifier" B VAL @p_8010_152_ps_include - VAL_ksi@ VAR sapi "Service Access Point Identifier" B VAL @p_8010_152_ps_include - VAL_sapi@ VAR l_buf "Length in bits" S VAR o_buf "Offset in bits" S VAR buf "Message content" B VAR sim_type "Type of subscriber card present." B VAL @p_8010_152_ps_include - VAL_sim_type@ VAR content_tmsi "Content of TMSI" B VAR uarfcn_rssi "UMTS channel RSSI measurement" C VAL @p_8010_152_ps_include - VAL_uarfcn_rssi@ VAR uarfcn "UMTS channel number" S VAL @p_8010_152_ps_include - VAL_uarfcn@ VAR ciphering_key "Ciphering key" B VAR integrity_key "Integrity protection key" B VAR cell_status "Cell suitability status" B VAL @p_8010_152_ps_include - VAL_cell_status@ VAR psc "FDD primary scrambling code" S VAL @p_8010_152_ps_include - VAL_psc@ VAR threshold "THRESHOLD value" L VAL @p_8010_152_ps_include - VAL_threshold@ VAR start_val "START value (20 bits)" L VAL @p_8010_152_ps_include - VAL_start_val@ VAR tx_diversity "UMTS FDD TX diversity indicator" B VAL @p_8010_152_ps_include - VAL_tx_diversity@ COMP acc "Container for the access control class field from (U)SIM, see [3G 11.11] and [3G 31.102]" { content [SIZE_ACC] ; Content of access control class } COMP ad "Container for the administrative data field from (U)SIM, see [3G 11.11] and [3G 31.102]" { op ; UE operation mode ai [SIZE_AI] ; Additional information } COMP gsm_bands "GSM bands" { gsm_frequency_band ; Frequency band specification gsm_band_priority ; GSM band priority } COMP bsic "GSM BSIC" { ncc ; NCC bcc ; BCC } COMP gsm_cell_description "GSM channel number and band specification" { gsm_frequency_band ; Band specification arfcn ; Channel number bsic ; BSIC } COMP gsm_ncell_list "GSM neighbour cell list" { gsm_cell_description [1.. MAX_GSM_NCELLS] ; GSM neighbour cell descriptions } COMP gsm_ncell_measurement "GSM neighbour cell measurement result" { gsm_cell_description ; GSM neighbour cell description bsic_valid ; BSIC validated < () arfcn_rssi > ; Average received signal level } COMP gsm_ncell_results "GSM neighbour cell results" { gsm_ncell_measurement [1.. MAX_GSM_NCELLS] ; GSM neighbour cell descriptions } COMP imsi "Container for a subscriber id" { identity [SIZE_IMSI_MIN..SIZE_IMSI_MAX] ; Content of IMSI } COMP k_c "Container for GSM ciphering parameter" { key [SIZE_KC] ; Ciphering key ksi ; Ciphering key sequence number } TYPEDEF COMP k_c k_c_gprs "Container for GPRS ciphering parameter" COMP gsm_key_set "Contains information related to ciphering" { k_c ; KC k_c_gprs ; KC-GPRS } COMP ul_sdus "Sequence numbers and mem handles pr. NSAPI" { ul_sequence_number ; Sequence number of last unacknowledged uplink SDU dl_sequence_number ; Sequence number of last unacknowledged downlink SDU (used by the network) mem_handle PTR [0 .. MAX_UL_SDU] ; List of unacknowledged uplink SDUs } COMP lac "Container for location area code" { lac_elements [SIZE_LAC] ; Location area code element } COMP operation_mode "Supported radio access technologies" { access_modes ; Supported access modes < () gsm_bands > ; GSM bands } COMP nas_system_info "NAS system information" { lac ; Location area code < () rac > ; Routing area code nmo ; Network mode of operation attach_detach_allowed ; Attach / detach allowed t3212 ; Periodic updating timer } COMP p_tmsi "Container for P-TMSI" { content_p_tmsi [SIZE_P_TMSI] ; Content of P-TMSI } COMP plmn_id "Container for a GSM MAP network identifier" { mcc [SIZE_MCC] ; Mobile country code mnc [SIZE_MNC_MIN..SIZE_MNC_MAX] ; Mobile network code } TYPEDEF COMP plmn_id selected_plmn "Selected network identifier" TYPEDEF COMP plmn_id home_plmn "Home network identifier" TYPEDEF COMP plmn_id equivalent_plmn "Equivalent network identifier" COMP lai "Container for location area information" { plmn_id ; Network ID lac ; Location area code } COMP forbidden_lai "Container for forbidden location area list" { lai [1.. MAX_FORBIDDEN_LAI] ; location area information } COMP equivalent_plmn_list "Container for equivalent PLMN list" { equivalent_plmn [0..MAX_EQUIVALENT_PLMNS] ; Equivalent PLMN } COMP rai "Container for packet switched routing area identification" { lai ; Location area information rac ; Routing area code } COMP ps_loci "Container for packet switched location information" { rai ; Routing area identification < () p_tmsi > ; P-TMSI } COMP sdu "Container for a message" { l_buf ; Length in bits o_buf ; Offset in bits buf [1] ; Message content } COMP tmsi "Container for TMSI" { content_tmsi [SIZE_TMSI] ; Content of TMSI } COMP loci "Container for location information" { lai ; Location area information < () tmsi > ; TMSI } COMP umts_cell_description "Container for cell description information for a UMTS cell" { uarfcn ; UMTS Channel number psc ; UMTS Primary scrambling code < () tx_diversity > ; UMTS TX diversity indicator } COMP key_set "Ciphering and integrity keys for a CN domain" { ksi ; Key set identifier ciphering_key [SIZE_CK] ; Ciphering key integrity_key [SIZE_IK] ; Integrity protection key } COMP umts_ncell_list "UMTS neighbour cell list" { umts_cell_description [1.. MAX_UMTS_NCELLS] ; UMTS neighbour cell descriptions } COMP umts_ncell_measurement "UMTS neighbour cell measurement result" { psc ; Primary scrambling code cell_status ; Cell suitability status < () cpich_rscp > ; CPICH RSCP < () cpich_ec_n0 > ; CPICH Ec/N0 } COMP umts_ncell_results "UMTS neighbour cell results" { uarfcn ; Channel uarfcn_rssi ; Channel RSSI umts_ncell_measurement [1..MAX_UMTS_NCELLS_PER_UARFCN] ; Cell measurements } COMP cs_security_parms "Contains parameters related to ciphering and integrity protection for CS domain." { key_set ; Ciphering and integrity keys < () start_val > ; Start value (PS) } TYPEDEF COMP cs_security_parms ps_security_parms "Contains parameters related to ciphering and integrity protection for PS domain." COMP umts_security_info "Contains information related to UMTS ciphering and integrity protection." { < () threshold > ; THRESHOLD value cs_security_parms ; UMTS circuit switched security parameters ps_security_parms ; UMTS packet switched security parameters } COMP security_info "Contains information related to ciphering and integrity protection." { sim_type ; SIM type < () gsm_key_set > ; GSM specific security information < () umts_security_info > ; UMTS specific security information } ; PS_EXPORT 0x0000 PRIM PS_EXPORT 0x0000 { acc ; Access control class ad ; Administrative data arfcn ; GSM channel number arfcn_rssi ; GSM channel RSSI measurement bsic ; GSM BSIC cn_domain ; Core network domain identity cpich_ec_n0 ; UMTS cell measurement value of CPICH Ec/N0 cpich_rscp ; UMTS cell measurement value of CPICH RSCP est_service ; Establisment service cs_security_parms ; UMTS security parameters equivalent_plmn ; Equivalent network identifier equivalent_plmn_list ; Container for equivalent PLMN list forbidden_lai ; Container for forbidden location area list gsm_cell_description ; GSM channel number and band specification gsm_frequency_band ; Frequency band specification gsm_ncell_index ; GSM neighbour cell index gsm_ncell_list ; GSM neighbour cell list gsm_ncell_measurement ; GSM neighbour cell measurement result gsm_ncell_results ; GSM neighbour cell results gsm_key_set ; GSM Key Set for Ciphering home_plmn ; Home network identifier imsi ; Container for a subscriber id k_c ; KC k_c_gprs ; KC-GPRS key_set ; UMTS key set for ciphering and integrity handling ksi ; UMTS key set identifier lac ; Container for location area code lai ; Container for location area information loci ; Location information llc_mode ; LLC mode meas_mode ; Measurement mode mem_handle ; Memory Handle nas_system_info ; NAS system information operation_mode ; Supported radio access technologies. p_tmsi ; Packet temporary mobile subscriber identity peak_throughput ; Peak Trhoughput QoS Parameter plmn_id ; Container for a GSM MAP network identifier ps_loci ; Packet switched location information ps_security_parms ; UMTS security parameters psc ; FDD primary scrambling code radio_prio ; Radio Priority rac ; Routing Area Code rai ; Routing Area Identification rat ; Radio Access Technology Identifier rel_ind ; Local Release Indicator sapi ; Service Access Point Identifier search_mode ; Search mode for network scan security_info ; Security Information selected_plmn ; Selected network identifier start_val ; UMTS START value sim_type ; Subscriber card type tmsi ; Temporary mobile subscriber identity tx_diversity ; UMTS FDD TX diversity indicator uarfcn ; UMTS channel number uarfcn_rssi ; UMTS channel RSSI measurement ul_sdus ; List of Unacknowledged SDUs umts_cell_description ; Container for cell description information for a UMTS cell umts_ncell_list ; UMTS neighbour cell list umts_ncell_measurement ; UMTS neighbour cell measurement result umts_ncell_results ; UMTS neighbour cell results umts_security_info ; UMTS security information service_level ; Service Level sdu ; Container for a message }