view src/cs/riviera/rvt/rvt_gen.h @ 598:717ed17d82c6

aci3 vocoder control revamped, AT@VSEL now works as it should The vocoder control code (hl_audio_drv.c) that came with the TCS3 version of ACI was totally broken in the Calypso config (VOCODER_FUNC_INTERFACE) and worked in the standard analog voice environment only by luck. This code has now been rewritten to work correctly with our Calypso platform and TCS211 L1, and our new AT@VSEL mechanism (automatic enabling and disabling of MCSI voice path as the modem enters and exits the voice call state) now also works as designed.
author Mychaela Falconia <falcon@freecalypso.org>
date Wed, 27 Mar 2019 23:44:35 +0000
parents 6cea809631d7
children
line wrap: on
line source

/*******************************************************************************
 *
 * tr_gen.h
 *
 * This file contain general definitions of Trace Module.
 * Definitions are exportable
 *
 * (C) Texas Instruments, all rights reserved
 *
 * Version number	: 0.1
 *
 * History			: 0.1 (7/4/2000) - Created
 *
 * Date             : 7/4/2000
 *
 * Author           : Cristian Livadiotti, c-livadiotti@ti.com
 *
 ******************************************************************************/

#ifndef __RVT_GEN_H__
#define __RVT_GEN_H__

#include "rv/general.h"

/*
** If TRACE_MODULE is defined, the trace is using the trace task API.
** Otherwise, the trace is using the RVF.  NOW OBSOLETE !!!!!!!!
*/
//#define TRACE_MODULE


/*
** If FRAMING_PROTOCOL is defined, the trace mux should be used because of encapsulation and byte stuffing.
** Otherwise, the hyperterminal should be used.
*/
#define FRAMING_PROTOCOL


/*
** If MIXED_TRACE is defined, all traces are mixed on the same UART and the
** trace task handles the RX commands.
*/
//#define MIXED_TRACE

/*
** Type definitions
*/

/* Define return parameters.                                                     */
typedef enum {
	RVT_OK							= 0,
	RVT_NOT_SUPPORTED				= -2,
	RVT_NOT_READY					= -3,
	RVT_MEMORY_ERR					= -4,
	RVT_INTERNAL_ERR				= -9,
	RVT_INVALID_PARAMETER			= -10
} T_RVT_RET;



typedef UINT8  T_RVT_USER_ID;
typedef UINT32 T_RVT_MSG_LG;

typedef enum { 
	RVT_ASCII_FORMAT,   // 0
	RVT_BINARY_FORMAT   // 1
} T_RVT_FORMAT;


typedef UINT8 * T_RVT_BUFFER;

typedef char T_RVT_NAME;
#define RVT_NAME_MAX_LEN		(10)

#define RVT_RV_HEADER        0x11
#define RVT_L1_HEADER        0x12
#define RVT_L23_HEADER       0x13
#define RVT_TM_HEADER        0x14
#define RVT_RNET_HEADER      0x15
#define RVT_PROF_HEADER      0x16
#define RVT_GTTBACK_HEADER   0x17
#define RVT_OTHER_HEADER     0x18
/* FreeCalypso additions */
#define RVT_AT_HEADER        0x1A
#define RVT_EXTUI_HEADER     0x1B
#define RVT_TCH_HEADER       0x1C
#define RVT_KEEPALIVE_HEADER 0x1D
/* end of FreeCalypso additions */
#define RVT_INVALID_HEADER   0xFF

typedef void (*RVT_CALLBACK_FUNC)(T_RVT_BUFFER, UINT16);

/********* Fonction Prototypes ***********/
void
rvt_set_trace_level(T_RVT_BUFFER p_msg, UINT16 msg_length);

T_RVT_RET
rvt_send_trace_no_cpy(T_RVT_BUFFER p_buffer,
					 T_RVT_USER_ID user_id,
					 T_RVT_MSG_LG msg_lenght,
					 T_RVT_FORMAT msg_format);

T_RVT_RET 
rvt_send_trace_cpy(T_RVT_BUFFER msg,
				  T_RVT_USER_ID user_id,
				  T_RVT_MSG_LG msg_length,
				  T_RVT_FORMAT msg_format);


T_RVT_RET
rvt_register_id(T_RVT_NAME name[], T_RVT_USER_ID *tr_id, RVT_CALLBACK_FUNC callback);

T_RVT_RET
rvt_mem_alloc(T_RVT_USER_ID user_id, T_RVT_MSG_LG buffer_lenght, T_RVT_BUFFER * buff);

T_RVT_RET 
rvt_mem_free(T_RVT_BUFFER msg);


#endif