FreeCalypso > hg > fc-magnetite
view cdg211/prim/gmmrr.pdf @ 462:78e19122fa2b
README: update for D-Sample target support and hybrid UI
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Mon, 19 Mar 2018 19:59:35 +0000 |
parents | 56abf6cf8a0b |
children |
line wrap: on
line source
;******************************************************************************** ;*** File : gmmrr.pdf ;*** Creation : Fri Jun 08 13:57:27 CST 2007 ;*** XSLT Processor : Apache Software Foundation / http://xml.apache.org/xalan-j / supports XSLT-Ver: 1 ;*** Copyright : (c) Texas Instruments AG, Berlin Germany 2002 ;******************************************************************************** ;*** Document Type : Service Access Point Specification ;*** Document Name : gmmrr ;*** Document No. : 8441.101.03.025 ;*** Document Date : 2003-09-02 ;*** Document Status: BEING_PROCESSED ;*** Document Author: SAB ;******************************************************************************** PRAGMA SRC_FILE_TIME "Tue Aug 10 15:45:16 2004" PRAGMA LAST_MODIFIED "2003-09-02" PRAGMA ID_AND_VERSION "8441.101.03.025" CONST MAX_DIGITS 16 ; CONST SIZE_MCC 3 ; maximum number of BCD digits of the mobile country code CONST SIZE_MNC 3 ; maximum number of BCD digits of the mobile network code VALTAB VAL_old_tlli VAL 0xFFFFFFFF GMMRR_TLLI_INVALID "TLLI invalid (see GSM 3.03)" VALTAB VAL_service_state VAL 0 GMMRR_SERVICE_NONE "No service" VAL 1 GMMRR_SERVICE_LIMITED "Limited service" VAL 2 GMMRR_SERVICE_FULL "Full service" VAL 3 GMMRR_SERVICE_UNKNOWN "Service unknown" VALTAB VAL_net_mode VAL 0 GMMRR_NET_MODE_I "Network operation mode I, only one Paging channel for both: PCCCH or CCCH" VAL 1 GMMRR_NET_MODE_II "Network operation mode II, Paging only on CCCH" VAL 2 GMMRR_NET_MODE_III "Network operation mode III, Paging on CCCH for CS and either on CCCH or on PCCCH for GPRS, if PCCH allocated in the cell" VALTAB VAL_standby_cause VAL 1 GMMRR_TIMEOUT_OF_T3314 "GMM enters state STANDBY because of timeout of READY timer T3314" VAL 2 GMMRR_RESET_OF_T3314 "GMM enters state STANDBY because GMM receives a message witrh timer_value 0" VAL 3 GMMRR_FORCE_TO_STANDBY "GMM receives a message indicating FORCE TO STANDBY" VALTAB VAL_old_ptmsi VAL 0xFFFFFFFF GMMRR_TMSI_INVALID "P-TMSI or TMSI invalid (see GSM 3.03)" VALTAB VAL_v_mid VAL 0 V_MID_NOT_PRES "not present" VAL 1 V_MID_PRES "present" VALTAB VAL_id_type VAL 0 TYPE_NO_ID "no identity" VAL 1 TYPE_IMSI "IMSI" VAL 4 TYPE_TMSI "TMSI" VALTAB VAL_response VAL DEF "The call is confirmed" VAL 0 GMMRR_CS_PAGE_REJ "The call is rejected" VAL 1 GMMRR_CS_PAGE_CNF "The call is confirmed" VALTAB VAL_page_id VAL DEF "P-TMSI" VAL 0 GMMRR_IMSI "IMSI" VAL 1 GMMRR_PTMSI "P-TMSI" VALTAB VAL_mobile_class VAL DEF "Combined GPRS attach" VAL 1 GMMRR_CLASS_A "Combined GPRS" VAL 2 GMMRR_CLASS_B "GPRS and GSM" VAL 3 GMMRR_CLASS_BC "Combined GPRS if possible, otherwise GSM only" VAL 4 GMMRR_CLASS_BG "Combined GPRS if possible, otherwise GPRS only" VAL 5 GMMRR_CLASS_CC "reserved. (GSM-only)" VAL 6 GMMRR_CLASS_CG "GPRS-only" VALTAB VAL_susp_gprs VAL DEF "Suspend GPRS" VAL 0 GMMRR_NOT_SUSP_GPRS "Do not suspend GPRS" VAL 1 GMMRR_SUSP_GPRS "Suspend GPRS" VALTAB VAL_split_pg_cycle VAL 704 GMMRR_NO_DRX "Non DRX mode" VALTAB VAL_lac VAL DEF "lac" VAL 0xFFFE GMMRR_LA_INVALID "la invalid" VALTAB VAL_rac VAL 0xFF GMMRR_RAC_INVALID "routing area code invalid" VALTAB VAL_gmmrr_non_drx_timer VAL 0 DRX_NO "no non-DRX mode after transfer state" VAL 1 DRX_1_SEC "max. 1 sec non-DRX mode after transfer" VAL 2 DRX_2_SEC "max. 2 sec non-DRX mode after transfer" VAL 3 DRX_4_SEC "max. 4 sec non-DRX mode after transfer" VAL 4 DRX_8_SEC "max. 8 sec non-DRX mode after transfer" VAL 5 DRX_16_SEC "max. 16 sec non-DRX mode after transfer" VAL 6 DRX_32_SEC "max. 32 sec non-DRX mode after transfer" VAL 7 DRX_64_SEC "max. 64 sec non-DRX mode after transfer" VALTAB VAL_gmmrr_susp_cause VAL 0 GMMRR_ABNORMAL_RELEASE "GRR should release immediately the running TBF" VAL 1 GMMRR_NORMAL_RELEASE "GRR should wait until TBF is released" VALTAB VAL_spgc_ccch_supp VAL 0 GMMRR_SPGC_CCCH_SUPP_NO "Split paging cycle on CCCH is not supported by the mobile station" VAL 1 GMMRR_SPGC_CCCH_SUPP_YES "Split paging cycle on CCCH is supported by the mobile station" VALTAB VAL_cu_cause VAL 0 GMMRR_RA_DEFAULT "GRR should not perform Cell Update Access" VAL 1 GMMRR_RA_CU "GRR should perforn Random Access with cause Cell Update" VAR old_tlli "old temporary logical link identifier" L VAL @p_gmmrr - VAL_old_tlli@ VAR new_tlli "new temporary logical link identifier" L VAL @p_gmmrr - VAL_old_tlli@ VAR service_state "Service state" B VAL @p_gmmrr - VAL_service_state@ VAR net_mode "Network operation mode" B VAL @p_gmmrr - VAL_net_mode@ VAR standby_cause "standby cause" B VAL @p_gmmrr - VAL_standby_cause@ VAR old_ptmsi "old ptmsi" L VAL @p_gmmrr - VAL_old_ptmsi@ VAR new_ptmsi "new ptmsi" L VAL @p_gmmrr - VAL_old_ptmsi@ VAR v_mid "valid flag" B VAL @p_gmmrr - VAL_v_mid@ VAR id_type "type of identity" B VAL @p_gmmrr - VAL_id_type@ VAR id "IMSI digits" B VAR tmsi_dig "TMSI digits" L VAR response "CS Paging respnonse" B VAL @p_gmmrr - VAL_response@ VAR page_id "Page ID" B VAL @p_gmmrr - VAL_page_id@ VAR mobile_class "Mobile Class" B VAL @p_gmmrr - VAL_mobile_class@ VAR acc_contr_class "Access Control Class" S VAR susp_gprs "suspend GPRS" B VAL @p_gmmrr - VAL_susp_gprs@ VAR split_pg_cycle "Split paging cycle (the value, NOT the code)" S VAL @p_gmmrr - VAL_split_pg_cycle@ VAR lac "location area code" S VAL @p_gmmrr - VAL_lac@ VAR rac "routing area code" B VAL @p_gmmrr - VAL_rac@ VAR gmmrr_non_drx_timer "non-DRX timer" B VAL @p_gmmrr - VAL_gmmrr_non_drx_timer@ VAR gmmrr_susp_cause "suspension cause" B VAL @p_gmmrr - VAL_gmmrr_susp_cause@ VAR spgc_ccch_supp "Split paging cycle support on CCCH" B VAL @p_gmmrr - VAL_spgc_ccch_supp@ VAR cid "cell identification" S VAR v_plmn "Valid Flag" B VAR mcc "Mobile Country Code" B VAR mnc "Mobile Network Code" B VAR cu_cause "Cell Update Cause" B VAL @p_gmmrr - VAL_cu_cause@ COMP imsi "mobile identity" { v_mid ; valid flag id_type ; type of identity id [MAX_DIGITS] ; IMSI digits tmsi_dig ; TMSI digits } COMP plmn "PLMN identification" { v_plmn ; Valid Flag mcc [SIZE_MCC] ; Mobile Country Code mnc [SIZE_MNC] ; Mobile Network Code } COMP rai "routing area identifier" { plmn ; PLMN lac ; Location Area Code rac ; Routing Area Code } COMP cell_env "current location of the mobile equipment" { rai ; Routing Area Identifier cid ; Cell Identification } COMP cell_info "Cell information" { cell_env ; Cell Environment service_state ; Service state net_mode ; Network operation mode } ; GMMRR_ASSIGN_REQ 0x1F00 ; GMMRR_ENABLE_REQ 0x1F01 ; GMMRR_DISABLE_REQ 0x1F02 ; GMMRR_CELL_IND 0x5F00 ; GMMRR_READY_REQ 0x1F03 ; GMMRR_STANDBY_REQ 0x1F04 ; GMMRR_PAGE_IND 0x5F02 ; GMMRR_CS_PAGE_IND 0x5F03 ; GMMRR_CS_PAGE_RES 0x1F05 ; GMMRR_SUSPEND_REQ 0x1F06 ; GMMRR_SUSPEND_CNF 0x5F04 ; GMMRR_RESUME_REQ 0x1F07 ; GMMRR_ATTACH_STARTED_REQ 0x1F0A ; GMMRR_ATTACH_FINISHED_REQ 0x1F0B ; GMMRR_CELL_RES 0x1F0C ; GMMRR_CR_IND 0x5F08 PRIM GMMRR_ASSIGN_REQ 0x1F00 { old_tlli ; Old temporary logical link identifier new_tlli ; New temporary logical link identifier old_ptmsi ; Old Packet Temporary MS Identity new_ptmsi ; New Packet Temporary MS Identity imsi ; IMSI rai ; Routing area identifier assinged by the network } PRIM GMMRR_ENABLE_REQ 0x1F01 { mobile_class ; Mobile Class acc_contr_class ; Access control class split_pg_cycle ; Split paging cycle spgc_ccch_supp ; Split paging cycle support on CCCH gmmrr_non_drx_timer ; non_DRX timer } PRIM GMMRR_DISABLE_REQ 0x1F02 { } PRIM GMMRR_CELL_IND 0x5F00 { cell_info ; Cell information } PRIM GMMRR_READY_REQ 0x1F03 { } PRIM GMMRR_STANDBY_REQ 0x1F04 { standby_cause ; standby cause } PRIM GMMRR_PAGE_IND 0x5F02 { page_id ; page ID } PRIM GMMRR_CS_PAGE_IND 0x5F03 { } PRIM GMMRR_CS_PAGE_RES 0x1F05 { response ; response susp_gprs ; Suspend GPRS } PRIM GMMRR_SUSPEND_REQ 0x1F06 { susp_gprs ; Suspend GPRS gmmrr_susp_cause ; Suspension Cause } PRIM GMMRR_SUSPEND_CNF 0x5F04 { } PRIM GMMRR_RESUME_REQ 0x1F07 { } PRIM GMMRR_ATTACH_STARTED_REQ 0x1F0A { } PRIM GMMRR_ATTACH_FINISHED_REQ 0x1F0B { } PRIM GMMRR_CELL_RES 0x1F0C { cu_cause ; Cell Update Cause } PRIM GMMRR_CR_IND 0x5F08 { }