/*
+--------------------------------------------------------------------------+
| PROJECT : PROTOCOL STACK                                                 |
| FILE    : m_rr_short_pd.val                                              |
| SOURCE  : "msg\rr_short_pd.mdf"                                          |
| LastModified : "2003-11-06"                                              |
| IdAndVersion : "8010.602.03.001"                                         |
| SrcFileTime  : "Wed Nov 28 10:21:00 2007"                                |
| Generated by CCDGEN_2.5.5A on Fri Oct 14 21:41:52 2016                   |
|           !!DO NOT MODIFY!!DO NOT MODIFY!!DO NOT MODIFY!!                |
+--------------------------------------------------------------------------+
*/

/* PRAGMAS
 * PREFIX                 : NONE
 * COMPATIBILITY_DEFINES  : NO (require PREFIX)
 * ALWAYS_ENUM_IN_VAL_FILE: NO
 * ENABLE_GROUP: NO
 * CAPITALIZE_TYPENAME: NO
 * CCDNAME: RR_SHORT
 */


#ifndef M_RR_SHORT_PD_VAL
#define M_RR_SHORT_PD_VAL


#define CDG_ENTER__M_RR_SHORT_PD_VAL

#define CDG_ENTER__FILENAME _M_RR_SHORT_PD_VAL
#define CDG_ENTER__M_RR_SHORT_PD_VAL__FILE_TYPE CDGINC
#define CDG_ENTER__M_RR_SHORT_PD_VAL__LAST_MODIFIED _2003_11_06
#define CDG_ENTER__M_RR_SHORT_PD_VAL__ID_AND_VERSION _8010_602_03_001

#define CDG_ENTER__M_RR_SHORT_PD_VAL__SRC_FILE_TIME _Wed_Nov_28_10_21_00_2007

#include "CDG_ENTER.h"

#undef CDG_ENTER__M_RR_SHORT_PD_VAL

#undef CDG_ENTER__FILENAME

#include "m_rr_com.val"   /* Access values independent from the corresponding h-file. */


/*
 * Value constants for VAL_bsic_seen
 */
#define NO_INV_BSIC_SEEN               (0x0)      /* No cell with invalid BSIC and allowed NCC part of BSIC is seen. */
#define INV_BSIC_SEEN                  (0x1)      /* One cell or more with invalid BSIC and allowed NCC part of BSIC is seen. */

/*
 * Value constants for VAL_cv_bep
 */
#define CV_BEP_0                       (0x0)      /* 2.00 > std(BEP)/mean(BEP) > 1.75 */
#define CV_BEP_1                       (0x1)      /* 1.75 > std(BEP)/mean(BEP) > 1.50 */
#define CV_BEP_2                       (0x2)      /* 1.50 > std(BEP)/mean(BEP) > 1.25 */
#define CV_BEP_3                       (0x3)      /* 1.25 > std(BEP)/mean(BEP) > 1.00 */
#define CV_BEP_4                       (0x4)      /* 1.00 > std(BEP)/mean(BEP) > 0.75 */
#define CV_BEP_5                       (0x5)      /* 0.75 > std(BEP)/mean(BEP) > 0.50 */
#define CV_BEP_6                       (0x6)      /* 0.50 > std(BEP)/mean(BEP) > 0.25 */
#define CV_BEP_7                       (0x7)      /* 0.25 > std(BEP)/mean(BEP) > 0.00 */

/*
 * Value constants for VAL_dtx_used
 */
#define DTX_USED_NO                    (0x0)      /* DTX was not used               */
#define DTX_USED_YES                   (0x1)      /* DTX was used                   */

/*
 * Value constants for VAL_inv_bsic_rep
 */
#define NO_REPORT                      (0x0)      /* Indicates that GSM cells with invalid BSIC and allowed NCC part should not be reported */
#define YES_REPORT                     (0x1)      /* Indicates that GSM cells with invalid BSIC and allowed NCC part should be reported */

/*
 * Value constants for VAL_pow_ctrl
 */
#define POW_CTRL_NO                    (0x0)      /* PWRC is not set                */
#define POW_CTRL_YES                   (0x1)      /* PWRC is set                    */

/*
 * Value constants for VAL_rep_rate
 */
#define NORMAL_RATE                    (0x0)      /* SACCH rate reporting.          */
#define REDUCED_RATE                   (0x1)      /* Reduced reporting rate allowed. */

/*
 * Value constants for VAL_report_type
 */
#define RT_EMR                         (0x0)      /* MS shall use the Enhanced Measurement Report message, if at least one BSIC is allocated to each BA frequency, otherwise the Measurement Report message. */
#define RT_MR                          (0x1)      /* The MS shall use the Measurement Report message for reporting. */

/*
 * Value constants for VAL_scale
 */
#define SCALE_ZERO_DB                  (0x0)      /* 0 dB offset is used for the reported RXLEV values */
#define SCALE_TEN_DB                   (0x1)      /* +10 dB offset is used for the reported RXLEV values */

/*
 * Value constants for VAL_scale_ord
 */
#define SC_ORD_ZERO_DB                 (0x0)      /* 0 dB offset, which shall be used for the reported RXLEV values */
#define SC_ORD_TEN_DB                  (0x1)      /* +10 dB offset, which shall be used for the reported RXLEV values */
#define SC_ORD_AUTOMATIC               (0x2)      /* automatic offset, which shall be used for the reported RXLEV values */

/*
 * Value constants for VAL_sl2h
 */
#define VAL_SL2H___DEF                 (0x0)      /* reserved                       */
#define SL2H_0                         (0x0)      /* Short Layer 2 header: UI command frame */

/*
 * user defined constants
 */
#define L3MAX_ACK                      (0xfb)     
#define L3MAX                          (0xfb)     
#define MAX_NNC                        (0x60)     
#define MAX_BSICI                      (0x8)      
#define MAX_2GEXT                      (0x84)     

#include "CDG_LEAVE.h"


#endif