FreeCalypso > hg > fc-magnetite
view src/g23m-gprs/llc/llc.h @ 700:800bf29abf31
audio mode load change from Tourmaline
Our FreeCalypso universe now has two kinds of audio mode config files:
the old 164 byte kind and the new 176 byte kind. We are not enabling
L1_NEW_AEC in Magnetite, only in Tourmaline, thus 164 byte audio mode
files are still native to Magnetite. But we still desire graceful
handling of the situation when a running Magnetite fw may load a
176 byte audio mode file (presumably with new AEC config), thus we
incorporate the same audio mode loading change which we implemented
in Tourmaline: if the loaded audio mode file is of the wrong kind,
the AEC config is cleared to default disabled state.
| author | Mychaela Falconia <falcon@freecalypso.org> |
|---|---|
| date | Fri, 30 Jul 2021 03:55:52 +0000 |
| parents | 219afcfc6250 |
| children |
line wrap: on
line source
/* +----------------------------------------------------------------------------- | Project : | Modul : +----------------------------------------------------------------------------- | Copyright 2002 Texas Instruments Berlin, AG | All rights reserved. | | This file is confidential and a trade secret of Texas | Instruments Berlin, AG | The receipt of or possession of this file does not convey | any rights to reproduce or disclose its contents or to | manufacture, use, or sell anything it may describe, in | whole, or in part, without the specific written consent of | Texas Instruments Berlin, AG. +----------------------------------------------------------------------------- | Purpose : Definitions for the Protocol Stack Entity | Logical Link Control (LLC) +----------------------------------------------------------------------------- */ #ifndef LLC_H #define LLC_H /*#ifdef FF_EGPRS #ifndef LLC_EDGE #define LLC_EDGE #endif *//*LLC_EDGE*/ /*#endif */ /*FF_EGPRS*/ /* * Shift of constants from SAPs LL and LLGMM to PS_include are handled here. */ #ifdef LL_2to1 #ifndef DTACS_MOBILITY_MANAGEMENT #define DTACS_MOBILITY_MANAGEMENT GRLC_MOBILITY_MANAGEMENT #endif #ifndef GRR_DTACS_DEFGRR_DTACS_DEF #define GRR_DTACS_DEF GRLC_DTACS_DEF #endif #ifndef GRR_DTACS_MOBILITY_MANAGEMENT #define GRR_DTACS_MOBILITY_MANAGEMENT GRLC_DTACS_MOBILITY_MANAGEMENT #endif #ifndef LLC_MAX_CNF #define LLC_MAX_CNF LL_MAX_CNF #endif #ifndef LLC_MAX_L3_XID_LEN #define LLC_MAX_L3_XID_LEN LL_MAX_L3_XID_LEN #endif #ifndef LLGMM_ERRCS_ACK_NO_PEER_RES_REEST #define LLGMM_ERRCS_ACK_NO_PEER_RES_REEST CAUSE_LLC_ACK_NO_PEER_RES_REEST #endif #ifndef LLGMM_ERRCS_DISC_NO_PEER_RES #define LLGMM_ERRCS_DISC_NO_PEER_RES CAUSE_LLC_DISC_NO_PEER_RES #endif #ifndef LLGMM_ERRCS_DM1_RECEIVED #define LLGMM_ERRCS_DM1_RECEIVED CAUSE_LLC_DM1_RECEIVED #endif #ifndef LLGMM_ERRCS_DM1_RECEIVED_REEST #define LLGMM_ERRCS_DM1_RECEIVED_REEST CAUSE_LLC_DM1_RECEIVED_REEST #endif #ifndef LLGMM_ERRCS_FRMR_COND #define LLGMM_ERRCS_FRMR_COND CAUSE_LLC_FRMR_COND #endif #ifndef LLGMM_ERRCS_FRMR_COND_REEST #define LLGMM_ERRCS_FRMR_COND_REEST CAUSE_LLC_FRMR_COND_REEST #endif #ifndef LLGMM_ERRCS_FRMR_RECEIVED #define LLGMM_ERRCS_FRMR_RECEIVED CAUSE_LLC_FRMR_RECEIVED #endif #ifndef LLGMM_ERRCS_L3_REEST #define LLGMM_ERRCS_L3_REEST CAUSE_LLC_L3_REEST #endif #ifndef LLGMM_ERRCS_MULT_ASS_TLLI #define LLGMM_ERRCS_MULT_ASS_TLLI CAUSE_LLC_MULT_ASS_TLLI #endif #ifndef LLGMM_ERRCS_NO_PEER_RES #define LLGMM_ERRCS_NO_PEER_RES CAUSE_LLC_NO_PEER_RES #endif #ifndef LLGMM_ERRCS_PEER_BUSY_REEST #define LLGMM_ERRCS_PEER_BUSY_REEST CAUSE_LLC_PEER_BUSY_REEST #endif #ifndef LLGMM_ERRCS_PEER_REEST #define LLGMM_ERRCS_PEER_REEST CAUSE_LLC_PEER_REEST #endif #ifndef LLGMM_ERRCS_SABM_NO_PEER_RES #define LLGMM_ERRCS_SABM_NO_PEER_RES CAUSE_LLC_SABM_NO_PEER_RES #endif #ifndef LLGMM_ERRCS_XID_NO_PEER_RE #define LLGMM_ERRCS_XID_NO_PEER_RES CAUSE_LLC_XID_NO_PEER_RES #endif #ifndef LLGMM_ERRCS_DM0_RECEIVED_REEST #define LLGMM_ERRCS_DM0_RECEIVED_REEST CAUSE_LLC_DM0_RECEIVED_REEST #endif #ifndef LL_ERRCS_NO_PEER_RES #define LL_ERRCS_NO_PEER_RES CAUSE_LLC_NO_PEER_RES #endif #ifndef LL_ERRCS_INVALID_XID #define LL_ERRCS_INVALID_XID CAUSE_LLC_INVALID_XID #endif #ifndef LL_PEAK_SUB #define LL_PEAK_SUB PS_PEAK_SUB #endif #ifndef LL_RELCS_DM_RECEIVED #define LL_RELCS_DM_RECEIVED CAUSE_LLC_DM_RECEIVED #endif #ifndef LL_RELCS_INVALID_XID #define LL_RELCS_INVALID_XID CAUSE_LLC_INVALID_XID #endif #ifndef LL_RELCS_NORMAL #define LL_RELCS_NORMAL CAUSE_LLC_NORMAL_REL #endif #ifndef LL_RELCS_NO_PEER_RES #define LL_RELCS_NO_PEER_RES CAUSE_LLC_NO_PEER_RES #endif #ifndef LL_DELAY_SUB #define LL_DELAY_SUB PS_DELAY_SUB #endif #ifndef LL_MEAN_SUB #define LL_MEAN_SUB PS_MEAN_SUB #endif #ifndef LL_NO_REL #define LL_NO_REL PS_NO_REL #endif #ifndef LL_PRECED_SUB #define LL_PRECED_SUB PS_PRECED_SUB #endif #ifndef LL_RLC_PROT #define LL_RLC_PROT PS_RLC_PROT #endif #ifndef LL_SAPI_1 #define LL_SAPI_1 PS_SAPI_1 #endif #ifndef LL_SAPI_3 #define LL_SAPI_3 PS_SAPI_3 #endif #ifndef LL_SAPI_5 #define LL_SAPI_5 PS_SAPI_5 #endif #ifndef LL_SAPI_7 #define LL_SAPI_7 PS_SAPI_7 #endif #ifndef LL_SAPI_9 #define LL_SAPI_9 PS_SAPI_9 #endif #ifndef LL_SAPI_11 #define LL_SAPI_11 PS_SAPI_11 #endif #ifndef LL_RADIO_PRIO_1 #define LL_RADIO_PRIO_1 PS_RADIO_PRIO_1 #endif #ifndef LL_TLLI_INVALID #define LL_TLLI_INVALID PS_TLLI_INVALID #endif #ifndef GRLC_RADIO_PRIO_1 #define GRLC_RADIO_PRIO_1 PS_RADIO_PRIO_1 #endif #ifndef GRLC_PEAK_SUB #define GRLC_PEAK_SUB PS_PEAK_SUB #endif #ifndef T_desc_list3 #define T_desc_list3 T_LL_desc_list3 #endif #endif /* LL_2to1 */ /* --------------------------------------------------------------------------------- */ /* remove traces */ #ifndef _SIMULATION_ #ifdef GET_STATE #undef GET_STATE #define GET_STATE(P) (ENTITY_DATA->P state) #endif #endif /* _SIMULATION_ */ /* --------------------------------------------------------------------------------- */ #ifdef TRACE_EVE #define TRACE_0_INFO(s) TRACE_EVENT ("Info: " s) #define TRACE_1_INFO(s,p1) TRACE_EVENT_P1("Info: " s,p1) #define TRACE_2_INFO(s,p1,p2) TRACE_EVENT_P2("Info: " s,p1,p2) #define TRACE_3_INFO(s,p1,p2,p3) TRACE_EVENT_P3("Info: " s,p1,p2,p3) #define TRACE_4_INFO(s,p1,p2,p3,p4) TRACE_EVENT_P4("Info: " s,p1,p2,p3,p4) #else #define TRACE_0_INFO(s) #define TRACE_1_INFO(s,p1) #define TRACE_2_INFO(s,p1,p2) #define TRACE_3_INFO(s,p1,p2,p3) #define TRACE_4_INFO(s,p1,p2,p3,p4) #endif #ifdef TRACE_PRIM #define TRACE_0_PARA(s) vsi_o_ttrace(VSI_CALLER TC_PRIM, "IPar: " s) #define TRACE_1_PARA(s,p1) vsi_o_ttrace(VSI_CALLER TC_PRIM, "IPar: " s,p1) #define TRACE_2_PARA(s,p1,p2) vsi_o_ttrace(VSI_CALLER TC_PRIM, "IPar: " s,p1,p2) #define TRACE_3_PARA(s,p1,p2,p3) vsi_o_ttrace(VSI_CALLER TC_PRIM, "IPar: " s,p1,p2,p3) #define TRACE_4_PARA(s,p1,p2,p3,p4) vsi_o_ttrace(VSI_CALLER TC_PRIM, "IPar: " s,p1,p2,p3,p4) #define TRACE_0_OUT_PARA(s) vsi_o_ttrace(VSI_CALLER TC_PRIM, "OPar: " s) #define TRACE_1_OUT_PARA(s,p1) vsi_o_ttrace(VSI_CALLER TC_PRIM, "OPar: " s,p1) #define TRACE_2_OUT_PARA(s,p1,p2) vsi_o_ttrace(VSI_CALLER TC_PRIM, "OPar: " s,p1,p2) #define TRACE_3_OUT_PARA(s,p1,p2,p3) vsi_o_ttrace(VSI_CALLER TC_PRIM, "OPar: " s,p1,p2,p3) #define TRACE_4_OUT_PARA(s,p1,p2,p3,p4) vsi_o_ttrace(VSI_CALLER TC_PRIM, "OPar: " s,p1,p2,p3,p4) #define TRACE_PRIM_FROM(s) vsi_o_ttrace(VSI_CALLER TC_PRIM, "Pdir: " s) #define TRACE_PRIM_TO(s) vsi_o_ttrace(VSI_CALLER TC_PRIM, "Pdir: " s) #else #define TRACE_0_PARA(s) #define TRACE_1_PARA(s,p1) #define TRACE_2_PARA(s,p1,p2) #define TRACE_3_PARA(s,p1,p2,p3) #define TRACE_4_PARA(s,p1,p2,p3,p4) #define TRACE_0_OUT_PARA(s) #define TRACE_1_OUT_PARA(s,p1) #define TRACE_2_OUT_PARA(s,p1,p2) #define TRACE_3_OUT_PARA(s,p1,p2,p3) #define TRACE_4_OUT_PARA(s,p1,p2,p3,p4) #define TRACE_PRIM_FROM(s) #define TRACE_PRIM_TO(s) #endif /* --------------------------------------------------------------------------------- */ /* * The following macro is similar to PFREE_DESC2. Instead of doing * a PFREE(P) it does a MFREE(p). This macro is used to free CCI primitives * which are removed from CCI SAP and added into this header file. */ #define MFREE_PRIM_DESC2(p) { MFREE_DESC2 ((p)->desc_list2.first); \ MFREE ((p)); \ } /* * The following macro is similar to PFREE_DESC. Instead of doing * a PFREE(P) it does a MFREE(p). This macro is used to free CCI primitives * which are removed from CCI SAP and added into this header file. */ #define MFREE_PRIM_DESC(p) { MFREE_DESC ((p)->desc_list.first); \ MFREE ((p)); \ } /* * defines the user of the vsi interface */ #define VSI_CALLER LLC_handle, #define VSI_CALLER_SINGLE LLC_handle /* * Macros */ /* * Switch all LLC services with multiple incarnations to use the incarnation * for the given SAPI. Current sapi is stored and all LLC layer parameters * with multiple incarnations are switched to use the incarnation for the * given SAPI. */ #define SWITCH_LLC(s) llc_data->current_sapi = s; \ SWITCH_PARAM (iov_i, IMAP(s)); \ SWITCH_PARAM (n200, UIMAP(s)); \ SWITCH_PARAM (n201_u, UIMAP(s)); \ SWITCH_PARAM (n201_i, IMAP(s)); \ SWITCH_PARAM (md, IMAP(s)); \ SWITCH_PARAM (mu, IMAP(s)); \ SWITCH_PARAM (kd, IMAP(s)); \ SWITCH_PARAM (ku, IMAP(s)); \ SWITCH_PARAM (requested_l3_xid, IMAP(s)); \ SWITCH_SERVICE (llc, sapi, UIMAP(s)); \ SWITCH_SERVICE (llc, u, UIMAP(s)); \ SWITCH_SERVICE (llc, itx, IMAP(s)); \ SWITCH_SERVICE (llc, irx, IMAP(s)); \ SWITCH_SERVICE (llc, uitx, UIMAP(s)); \ SWITCH_SERVICE (llc, uirx, UIMAP(s)); \ SWITCH_SERVICE (llc, t200, UIMAP(s)); /* * Switch service s of entity e to use incarnation i. */ #define SWITCH_SERVICE(e,s,i) e##_data->##s = &(##e##_data->##s##_base[i]); /* * Switch LLC layer parameter p to incarnation i. */ #define SWITCH_PARAM(p,i) llc_data->##p = &(llc_data->##p##_base[i]); /* * Map SAPI to incarnation, for either acknowledged (4 incarnations) or * unacknowledged operation (6 incarnations) */ #ifdef LL_2to1 #define IMAP(s) (s == PS_SAPI_3 ? 0 : \ s == PS_SAPI_5 ? 1 : \ s == PS_SAPI_9 ? 2 : \ s == PS_SAPI_11? 3 : 0) #define UIMAP(s) (s == PS_SAPI_1 ? 0 : \ s == PS_SAPI_3 ? 1 : \ s == PS_SAPI_5 ? 2 : \ s == PS_SAPI_7 ? 3 : \ s == PS_SAPI_9 ? 4 : \ s == PS_SAPI_11? 5 : 0) #else #define IMAP(s) (s == LL_SAPI_3 ? 0 : \ s == LL_SAPI_5 ? 1 : \ s == LL_SAPI_9 ? 2 : \ s == LL_SAPI_11? 3 : 0) #define UIMAP(s) (s == LL_SAPI_1 ? 0 : \ s == LL_SAPI_3 ? 1 : \ s == LL_SAPI_5 ? 2 : \ s == LL_SAPI_7 ? 3 : \ s == LL_SAPI_9 ? 4 : \ s == LL_SAPI_11? 5 : 0) #endif /* * Add octet size of XID parameter P to variable V if the parameter is tagged. */ #define ADD_IF_TAGGED(V,P) \ if (llc_data->u->xid_tag & (0x00000001L << P)) \ { \ V += P##_LEN + P##_HDR_LEN; \ } /* * Tag XID parameter if requested to negotiate */ #define TAG_IF_REQUESTED(V,P) \ if (llc_data->##V##valid) \ { \ llc_data->u->xid_tag |= (0x00000001L << P); \ } /* * Tag XID parameter if requested to negotiate and sense of negotiation fits */ #define TAG_IF_REQUESTED_RSP(S,V,P) \ if (llc_data->u->requested_xid.##V##.valid) \ { \ if (llc_data->decoded_xid.##V##.valid) \ { \ /* simple add parameter. Sense of negotiation is already checked */ \ llc_data->u->xid_tag |= (0x00000001L << P); \ } \ else \ { \ /* Sense of negotiation compared with current values */ \ if (llc_data->u->requested_xid.##V##.value S *(llc_data->##V)) \ { \ llc_data->u->xid_tag |= (0x00000001L << P); \ } \ } \ } /* * Timer values are negotiated in units of 0.1 seconds but internally stored * in milliseconds. Therefore a conversion must be done with each XID * negotiation of timer values. */ #define XID_TIMER_CONVERSION 100 #define XID2INT(l) (l * XID_TIMER_CONVERSION) #define INT2XID(l) (l / XID_TIMER_CONVERSION) /* * Timer start- and stop macros for LLC */ #define TIMERSTART(t,d) itx_##t##_start((d)) #define TIMERSTOP(t) itx_##t##_stop() /* * Number of service incarnations (LLME, TX, and RX have only one incarnation) */ #define ACKNOWLEDGED_INC 4 #define UNACKNOWLEDGED_INC 6 #define MAX_SAPI_INC 6 #define U_NUM_INC UNACKNOWLEDGED_INC #define ITX_NUM_INC ACKNOWLEDGED_INC #define IRX_NUM_INC ACKNOWLEDGED_INC #define UITX_NUM_INC UNACKNOWLEDGED_INC #define UIRX_NUM_INC UNACKNOWLEDGED_INC #define T200_NUM_INC UNACKNOWLEDGED_INC #define T201_NUM_INC ACKNOWLEDGED_INC /* * Constants */ /* * Value constants for attached_counter */ #define CCI_NO_ATTACHE (0x0) /* no entity/service is attached to the primitive */ /* * Value constants for fcs_check */ #define CCI_FCS_PASSED (0x0) /* FCS check has been successfully passed */ #define CCI_FCS_FAILED (0x1) /* FCS check has been failed */ /* * Value constants for pm */ #define CCI_PM_UNPROTECTED (0x0) /* FCS covers frame header and information fields */ #define CCI_PM_PROTECTED (0x1) /* FCS covers frame header field and first N202 octets of information field */ /* * Value constants for ciphering_algorithm */ #define CCI_CIPHER_NO_ALGORITHM (0x0) /* frame shall not be ciphered */ #define CCI_CIPHER_GPRS_A5_1 (0x1) /* frame shall be ciphered using algorithm GPRS A5/1 */ #define CCI_CIPHER_GPRS_A5_2 (0x2) /* frame shall be ciphered using algorithm GPRS A5/2 */ /* * Value constants for direction */ #define CCI_DIRECTION_UPLINK (0x0) /* direction of LLC frame transmission is MS to SGSN */ #define CCI_DIRECTION_DOWNLINK (0x1) /* direction of LLC frame transmission is SGSN to MS */ /* * Bitoffset for encoding/decoding */ #define ENCODE_OFFSET 0 /* * C/R bit */ #define SGSN_COMMAND 1 #define SGSN_RESPONSE 0 #define MS_COMMAND 0 #define MS_RESPONSE 1 /* * Size definitions for common U frames (in octets and in bits). * Define only the header of the frame. FCS_SIZE will be added when the FCS * is calculated! */ #define U_HDR_SIZE 2 #define U_HDR_SIZE_BITS (U_HDR_SIZE * 8) #define FCS_SIZE 3 #define FCS_SIZE_BITS (FCS_SIZE * 8) #ifdef REL99 #define U_NULL_SIZE (U_HDR_SIZE) #define U_NULL_SIZE_BITS (U_NULL_SIZE * 8) #endif /* REL99 */ #define U_DISC_SIZE (U_HDR_SIZE) #define U_DISC_SIZE_BITS (U_DISC_SIZE * 8) #define U_DM_SIZE (U_HDR_SIZE) #define U_DM_SIZE_BITS (U_DM_SIZE * 8) #define U_FRMR_INFO_SIZE 10 #define U_FRMR_SIZE (U_HDR_SIZE + U_FRMR_INFO_SIZE) #define U_FRMR_SIZE_BITS (U_FRMR_SIZE * 8) /* * Masks and IDs for the different frame formats. Bitwise AND *_MASK with * the first octet of the control field must result in *_ID. */ #define I_FRAME_MASK 0x80 #define S_FRAME_MASK 0xC0 #define UI_FRAME_MASK 0xE0 #define U_FRAME_MASK 0xE0 #define I_FRAME_ID 0x00 #define S_FRAME_ID 0x80 #define UI_FRAME_ID 0xC0 #define U_FRAME_ID 0xE0 /* * Number of octets that must be contained in a valid control field of a frame. */ #define I_CTRL_OCTETS 3 #define S_CTRL_OCTETS 2 #define UI_CTRL_OCTETS 2 #define U_CTRL_OCTETS 1 /* * Minimum number of octets that must be contained in a frame to access * the complete control field. */ #define CTRL_MIN_OCTETS 2 #define I_CTRL_MIN_OCTETS 4 #define S_CTRL_MIN_OCTETS 3 #define UI_CTRL_MIN_OCTETS 3 #define U_CTRL_MIN_OCTETS 2 /* * Minimum number of octets that must be contained in a valid frame, excluding * the FCS field. */ #define I_FRAME_MIN_OCTETS_WITHOUT_FCS 5 #define S_FRAME_MIN_OCTETS_WITHOUT_FCS 3 #define UI_FRAME_MIN_OCTETS_WITHOUT_FCS 3 #define U_FRAME_MIN_OCTETS_WITHOUT_FCS 2 /* * Minimum number of octets that must be contained in a valid frame. */ #define FRAME_MIN_OCTETS 5 #define I_FRAME_MIN_OCTETS 8 #define S_FRAME_MIN_OCTETS 6 #define UI_FRAME_MIN_OCTETS 6 #define U_FRAME_MIN_OCTETS 5 #define U_FRAME_FRMR_INFO_OCTETS U_FRMR_INFO_SIZE #define S_FRAME_SACK_MIN_CTRL_OCTETS 1 #define S_FRAME_SACK_MAX_CTRL_OCTETS 32 /* * I frame and S frame commands/responses (bits S1, S2). */ #define I_FRAME_RR 0x00 #define I_FRAME_ACK 0x01 #define I_FRAME_RNR 0x02 #define I_FRAME_SACK 0x03 /* * U frame commands/responses (bits M4, M3, M2, M1). */ #ifdef REL99 #define U_FRAME_NULL 0x00 #endif /*REL99*/ #define U_FRAME_DM 0x01 #define U_FRAME_DISC 0x04 #define U_FRAME_UA 0x06 #define U_FRAME_SABM 0x07 #define U_FRAME_FRMR 0x08 #define U_FRAME_XID 0x0B /* * Reasons of frame rejection condition. The lower nibble conforms * to W4-W1 in the FRMR response frame. */ #define FRMR_W1 0x01 #define FRMR_W2 0x02 #define FRMR_W3 0x04 #define FRMR_W4 0x08 /* * !!!!!asap <R.LLC.XCEPTION.A.010> "W1 bit: Bit W3 shall be set to 1 in * conjunction with this bit." Is that always the case? */ #define FRMR_INCORRECT_LENGTH FRMR_W1 #define FRMR_INCORRECT_LENGTH_ABM (FRMR_W1 | FRMR_W4) #define FRMR_EXCEEDS_N201 FRMR_W2 #define FRMR_EXCEEDS_N201_ABM (FRMR_W2 | FRMR_W4) #define FRMR_UNDEFINED_CTRL FRMR_W3 #define FRMR_UNDEFINED_CTRL_ABM (FRMR_W3 | FRMR_W4) #define FRMR_CTRL_LENGTH_UNKNOWN 0x00 /* * Maximum value of LLC sequence numbers and state variables: * N(S), N(R), V(S), V(R), ... */ #define MAX_SEQUENCE_NUMBER 511 /* * UITX_*_QUEUE_SIZE defines the maximum number of frames for the various * UITX service incarnations (depeding on SAPI). UITX is the only service * which is limited with uplink flow control. Enough memory must be present * for all other services (U, ITX). U requires a maximum of 2 simultaneously * stored frames per SAPI: the first being a received response to a * previously sent command, and the second being a command which is to be sent * directly afterwards. */ #define UITX_1_QUEUE_SIZE 10 #define UITX_3_QUEUE_SIZE 1 #define UITX_5_QUEUE_SIZE 1 #define UITX_7_QUEUE_SIZE 1 #define UITX_9_QUEUE_SIZE 1 #define UITX_11_QUEUE_SIZE 1 #define ITX_3_QUEUE_SIZE 1 #define ITX_5_QUEUE_SIZE 1 #define ITX_9_QUEUE_SIZE 1 #define ITX_11_QUEUE_SIZE 1 /* * Because of the lack of flow control between GRLC and LLC, it is possible, * that LLC recieve frames from GRLC, but can not forward them to the higher * layers. The following constants define the number of UI frames to buffer * per SAPI until we get an LL_GETUNITDATA_REQ */ #define UIRX_QUEUE_SIZE 32 /* * The number of queued I-frames in ITX is limited to the windowsize ku. * If only ku frames are queued and we got an acknowledge for this, LLC * would have no more frames to send. The following variable defines a * number of additional frames to buffer. */ #ifdef _SIMULATION_ #define ITX_ADD_QUEUE_SIZE 8 #else #define ITX_ADD_QUEUE_SIZE 1 #endif /* * Maximum supported LLC parameter which should be negotiated initial. * Only values which are different to the default should be defined here. * In future this value should be read from the flash file system. */ #define N201_U_SUPPORTED 520 #define N201_I_SUPPORTED 520 #define KD_KD_SUPPORTED 64 #if defined (LL_2to1) || defined (REL99) #define KD_KU_SUPPORTED 16 #else #define KD_KU_SUPPORTED 8 #endif #define KD_MD_SUPPORTED 0 #define KD_MU_SUPPORTED 0 /* * Service definitions. Used to access service data with GET/SET_STATE. * * Services with multiple incarnation have to be defined as xxx-> * Services with only one incarnation have to be defined as xxx. */ #define LLME llme. #define SAPI sapi-> #define U u-> #define ITX itx-> #define IRX irx-> #define UITX uitx-> #define UIRX uirx-> #define T200 t200-> #define T201 t201-> #define TX tx. #define RX rx. /* #ifndef NTRACE*/ /* * These defintions are only needed for debugging purposes (!NTRACE). */ /* * The following definitions are necessary for the state initialisation of * services with the INIT_STATE() macro. */ #define U_0 U #define U_1 U #define U_2 U #define U_3 U #define U_4 U #define U_5 U #define ITX_0 ITX #define ITX_1 ITX #define ITX_2 ITX #define ITX_3 ITX #define IRX_0 IRX #define IRX_1 IRX #define IRX_2 IRX #define IRX_3 IRX #define UITX_0 UITX #define UITX_1 UITX #define UITX_2 UITX #define UITX_3 UITX #define UITX_4 UITX #define UITX_5 UITX #define UIRX_0 UIRX #define UIRX_1 UIRX #define UIRX_2 UIRX #define UIRX_3 UIRX #define UIRX_4 UIRX #define UIRX_5 UIRX #define T200_0 T200 #define T200_1 T200 #define T200_2 T200 #define T200_3 T200 #define T200_4 T200 #define T200_5 T200 #define T201_0 T201 #define T201_1 T201 #define T201_2 T201 #define T201_3 T201 /* * Service name definitions for trace purposes. The service abbrevation * (e.g. LLME) has to be the same as above for the service definitions. */ #define SERVICE_NAME_LLME "LLME" #define SERVICE_NAME_U_0 "U_1" #define SERVICE_NAME_U_1 "U_3" #define SERVICE_NAME_U_2 "U_5" #define SERVICE_NAME_U_3 "U_7" #define SERVICE_NAME_U_4 "U_9" #define SERVICE_NAME_U_5 "U_11" #define SERVICE_NAME_ITX_0 "ITX_3" #define SERVICE_NAME_ITX_1 "ITX_5" #define SERVICE_NAME_ITX_2 "ITX_9" #define SERVICE_NAME_ITX_3 "ITX_11" #define SERVICE_NAME_IRX_0 "IRX_3" #define SERVICE_NAME_IRX_1 "IRX_5" #define SERVICE_NAME_IRX_2 "IRX_9" #define SERVICE_NAME_IRX_3 "IRX_11" #define SERVICE_NAME_UITX_0 "UITX_1" #define SERVICE_NAME_UITX_1 "UITX_3" #define SERVICE_NAME_UITX_2 "UITX_5" #define SERVICE_NAME_UITX_3 "UITX_7" #define SERVICE_NAME_UITX_4 "UITX_9" #define SERVICE_NAME_UITX_5 "UITX_11" #define SERVICE_NAME_UIRX_0 "UIRX_1" #define SERVICE_NAME_UIRX_1 "UIRX_3" #define SERVICE_NAME_UIRX_2 "UIRX_5" #define SERVICE_NAME_UIRX_3 "UIRX_7" #define SERVICE_NAME_UIRX_4 "UIRX_9" #define SERVICE_NAME_UIRX_5 "UIRX_11" #define SERVICE_NAME_T200_0 "T200_1" #define SERVICE_NAME_T200_1 "T200_3" #define SERVICE_NAME_T200_2 "T200_5" #define SERVICE_NAME_T200_3 "T200_7" #define SERVICE_NAME_T200_4 "T200_9" #define SERVICE_NAME_T200_5 "T200_11" #define SERVICE_NAME_TX "TX" #define SERVICE_NAME_RX "RX" /* #endif !NTRACE */ /* * Timer definitions. For each timer a BASE and MAX value is defined. */ #define TIMER_T200_BASE (0) #define TIMER_T200_1 (TIMER_T200_BASE) #define TIMER_T200_3 (TIMER_T200_BASE+1) #define TIMER_T200_5 (TIMER_T200_BASE+2) #define TIMER_T200_7 (TIMER_T200_BASE+3) #define TIMER_T200_9 (TIMER_T200_BASE+4) #define TIMER_T200_11 (TIMER_T200_BASE+5) #define TIMER_T200_MAX (TIMER_T200_11) #define TIMER_T201_BASE (TIMER_T200_MAX+1) #define TIMER_T201_3 (TIMER_T201_BASE) #define TIMER_T201_5 (TIMER_T201_BASE+1) #define TIMER_T201_9 (TIMER_T201_BASE+2) #define TIMER_T201_11 (TIMER_T201_BASE+3) #define TIMER_T201_MAX (TIMER_T201_11) #define TIMER_MAX (TIMER_T201_MAX) #define TIMER_NUM (TIMER_MAX+1) /* * State definitions for each service. */ #define LLME_TLLI_UNASSIGNED 1 #define LLME_TLLI_ASSIGNED 2 #define LLME_TLLI_ASSIGNED_SUSPENDED 3 #define U_TLLI_UNASSIGNED 1 #define U_ADM 2 #define U_LOCAL_ESTABLISHMENT 3 #define U_REMOTE_ESTABLISHMENT 4 #define U_ABM 5 #define U_LOCAL_RELEASE 6 #define U_ESTABLISH_RES_PENDING 7 #define ITX_TLLI_UNASSIGNED 1 #define ITX_TLLI_ASSIGNED 2 #define ITX_ABM 3 #define ITX_ABM_PEER_BUSY 4 #define IRX_TLLI_UNASSIGNED 1 #define IRX_TLLI_ASSIGNED 2 #define IRX_ABM 3 #define IRX_ABM_BUSY 4 #define UITX_TLLI_UNASSIGNED_NOT_READY 1 #define UITX_TLLI_UNASSIGNED_READY 2 #define UITX_ADM_NOT_READY 3 #define UITX_ADM_READY 4 #define UIRX_TLLI_UNASSIGNED_NOT_READY 1 #define UIRX_TLLI_UNASSIGNED_READY 2 #define UIRX_ADM_NOT_READY 3 #define UIRX_ADM_READY 4 #define T200_TLLI_UNASSIGNED 1 #define T200_RESET 2 #define T200_RUNNING 3 #define TX_TLLI_UNASSIGNED_NOT_READY 1 #define TX_TLLI_UNASSIGNED_READY 2 #define TX_TLLI_ASSIGNED_NOT_READY 3 #define TX_TLLI_ASSIGNED_READY 4 #define RX_TLLI_UNASSIGNED 1 #define RX_TLLI_ASSIGNED 2 #ifndef TI_PS_OP_CIPH_DRIVER /* * user defined constants */ #define CIPH_SIZE_CK (0x10) #define CIPH_MAX_ELEM (0x14) #define CIPH_MAX_HEADER_SIZE (0x25) #define CIPH_N202 (0x4) /*==== TYPES ======================================================*/ /* * The following definitions was originally generated by CCD. The definitions are not used as * primitive definitions anymore, only for SNDCP internal usage. */ /* --------------------------------------------------------------------------------- */ /* * enum to Variable algo * Ciphering algorithm. * CCDGEN:WriteEnum_Count==2834 */ #ifndef __T_CIPH_algo__ #define __T_CIPH_algo__ typedef enum { CIPH_EA0 = 0x0, /* No encryption */ CIPH_EA1 = 0x1, /* Frame shall be ciphered using algorithm EA1 */ CIPH_EA2 = 0x2, /* Frame shall be ciphered using algorithm EA2 */ CIPH_EA3 = 0x3 /* Frame shall be ciphered using algorithm EA3 */ }T_CIPH_algo; #endif /* * enum to Variable direction * DIRECTION parameter * CCDGEN:WriteEnum_Count==2836 */ #ifndef __T_CIPH_direction__ #define __T_CIPH_direction__ typedef enum { CIPH_UPLINK_DIR = 0x0, /* See [3G 33.102] */ CIPH_DOWNLINK_DIR = 0x1 /* See [3G 33.102] */ }T_CIPH_direction; #endif /* * enum to Variable status * Status of the ciphering process * CCDGEN:WriteEnum_Count==2853 */ #ifndef __T_CIPH_status__ #define __T_CIPH_status__ typedef enum { CIPH_CIPH_FAIL = 0x0, /* Ciphering successful */ CIPH_CIPH_PASS = 0x1, /* Ciphering failed */ CIPH_CIPH_BUSY = 0x2, /* Ongoing ciphering */ CIPH_FCS_ERROR = 0x3 /* FCS error */ }T_CIPH_status; #endif /* * enum to Variable pm * Protected or unprotected mode * CCDGEN:WriteEnum_Count==2840 */ #ifndef __T_CIPH_pm__ #define __T_CIPH_pm__ typedef enum { CIPH_PM_UNPROTECTED = 0x0, /* FCS covers frame header field and first N202 octets of information field */ CIPH_PM_PROTECTED = 0x1 /* FCS covers frame header and information fields */ }T_CIPH_pm; #endif #ifndef __T_CIPH_ck__ #define __T_CIPH_ck__ /* * Ciphering key. * CCDGEN:WriteStruct_Count==13956 */ typedef struct { U8 ck_element[CIPH_SIZE_CK]; /*< 0: 16> T_CIPH_ck_element, Ciphering key element */ } T_CIPH_ck; #endif #ifndef __T_CIPH_init_cipher_req_parms__ #define __T_CIPH_init_cipher_req_parms__ /* * Ciphering algorithm initialisation parameters. * CCDGEN:WriteStruct_Count==13968 */ typedef struct { U8 algo; /*< 0: 1> T_CIPH_algo, Ciphering algorithm. */ U8 direction; /*< 1: 1> T_CIPH_direction, DIRECTION parameter */ U8 zzz_align0; /*< 2: 1> alignment */ U8 zzz_align1; /*< 3: 1> alignment */ T_CIPH_ck *ptr_ck; /*< 4: 4> pointer to Ciphering key. */ } T_CIPH_init_cipher_req_parms; #endif #ifndef __T_CIPH_gprs_parameters__ #define __T_CIPH_gprs_parameters__ /* * Structure containing LLC parameters * CCDGEN:WriteStruct_Count==13976 */ typedef struct { U8 pm; /*< 0: 1> T_CIPH_pm, Protected or unprotected mode */ U8 zzz_align0; /*< 1: 1> alignment */ U16 header_size; /*< 2: 2> T_CIPH_header_size, Frame header size */ U32 ciphering_input; /*< 4: 4> frame-dependent ciphering input */ U32 threshold; /*< 8: 4> T_CIPH_threshold, Threshold parameter */ } T_CIPH_gprs_parameters; #endif #ifndef __T_CIPH_umts_parameters__ #define __T_CIPH_umts_parameters__ /* * Structure containing umts parameters * CCDGEN:WriteStruct_Count==13980 */ typedef struct { U8 bearer; /*< 0: 1> T_CIPH_bearer, BEARER parameter */ U8 zzz_align0; /*< 1: 1> alignment */ U8 zzz_align1; /*< 2: 1> alignment */ U8 zzz_align2; /*< 3: 1> alignment */ U32 count_c; /*< 4: 4> COUNT-C parameter */ U8 dest_bit_offset; /*< 8: 1> T_CIPH_dest_bit_offset, Bit offset */ U8 org_bit_offset; /*< 9: 1> T_CIPH_org_bit_offset, Bit offset */ U8 zzz_align3; /*< 10: 1> alignment */ U8 zzz_align4; /*< 11: 1> alignment */ U32 threshold; /*< 12: 4> T_CIPH_threshold, Threshold parameter */ } T_CIPH_umts_parameters; #endif #ifndef __T_CIPH_in_data__ #define __T_CIPH_in_data__ /* * Structure containing length and pointer to the data * CCDGEN:WriteStruct_Count==13984 */ typedef struct { U16 len; /*< 0: 2> Length of buffer */ U8 zzz_align0; /*< 2: 1> alignment */ U8 zzz_align1; /*< 3: 1> alignment */ U32 buf; /*< 4: 4> Pointer to the data in buffer */ } T_CIPH_in_data; #endif /* * Stucture containing length and pointer to the data * CCDGEN:WriteStruct_Count==13988 */ #ifndef __T_CIPH_out_data__ #define __T_CIPH_out_data__ typedef T_CIPH_in_data T_CIPH_out_data; #endif #ifndef __T_CIPH_cipher_req_parms__ #define __T_CIPH_cipher_req_parms__ /* * Ciphering algorithm parameters. * CCDGEN:WriteStruct_Count==13990 */ typedef union { T_CIPH_gprs_parameters gprs_parameters; /*< 0: 12> Structure containing LLC parameters */ T_CIPH_umts_parameters umts_parameters; /*< 0: 16> Structure containing umts parameters */ } T_CIPH_cipher_req_parms; #endif #ifndef __T_CIPH_in_data_list__ #define __T_CIPH_in_data_list__ /* * Structure containing a list of in_data elements * CCDGEN:WriteStruct_Count==13994 */ typedef struct { T_CIPH_in_data *ptr_in_data; /*< 0: 4> pointer to Structure containing length and pointer to the data */ U16 c_in_data; /*< 4: 2> Number of elements */ U8 zzz_align0; /*< 6: 1> alignment */ U8 zzz_align1; /*< 7: 1> alignment */ } T_CIPH_in_data_list; #endif #endif /* TI_PS_OP_CIPH_DRIVER */ /* --------------------------------------------------------------------------------- */ #ifndef __T_kc__ #define __T_kc__ typedef struct { U8 key[8]; /*< 0: 8> ciphering key content */ } T_kc; #endif #ifndef __T_CCI_CIPHER_REQ__ #define __T_CCI_CIPHER_REQ__ typedef struct { U8 pm; /*< 0: 1> protected mode */ U8 ciphering_algorithm; /*< 16: 1> ciphering algorithm */ U8 direction; /*< 17: 1> ciphering transfer direction */ U8 attached_counter; /*< 29: 1> attached to primitive data counter */ U32 ciphering_input; /*< 4: 4> frame-dependent ciphering input */ T_kc kc; /*< 8: 8> ciphering key */ U32 reference1; /*< 32: 4> frame reference number */ U16 header_size; /*< 36: 2> frame header size */ U8 zzz_align0; /*< 38: 1> alignment */ U8 zzz_align1; /*< 39: 1> alignment */ T_sdu sdu; /*< 40: ? > service data unit */ } T_CCI_CIPHER_REQ; #endif #ifndef __T_CCI_DECIPHER_REQ__ #define __T_CCI_DECIPHER_REQ__ typedef struct { U8 pm; /*< 0: 1> protected mode */ U8 ciphering_algorithm; /*< 1: 1> ciphering algorithm */ U8 direction; /*< 16: 1> ciphering transfer direction */ U8 zzz_align0; /*< 30: 1> alignment */ T_kc kc; /*< 4: 8> ciphering key */ U32 ciphering_input; /*< 12: 4> frame-dependent ciphering input */ U32 reference1; /*< 20: 4> frame reference number */ U32 reference2; /*< 24: 4> second frame reference number */ U16 header_size; /*< 28: 2> frame header size */ U8 zzz_align1; /*< 30: 1> alignment */ U8 zzz_align2; /*< 31: 1> alignment */ T_desc_list desc_list; /*< 32: ? > list of generic data descriptors */ } T_CCI_DECIPHER_REQ; #endif #ifndef __T_CCI_RESET_REQ__ #define __T_CCI_RESET_REQ__ typedef struct { U8 dummy; /*< 0: 1> no parameters */ } T_CCI_RESET_REQ; #endif #ifndef __T_CCI_CIPHER_DESC_REQ__ #define __T_CCI_CIPHER_DESC_REQ__ typedef struct { U8 pm; /*< 0: 1> protected mode */ U8 ciphering_algorithm; /*< 16: 1> ciphering algorithm */ U8 direction; /*< 17: 1> ciphering transfer direction */ U8 attached_counter; /*< 29: 1> attached to primitive data counter */ U32 ciphering_input; /*< 4: 4> frame-dependent ciphering input */ T_kc kc; /*< 8: 8> ciphering key */ U32 reference1; /*< 32: 4> frame reference number */ U16 header_size; /*< 36: 2> frame header size */ U8 zzz_align0; /*< 38: 1> alignment */ U8 zzz_align1; /*< 39: 1> alignment */ T_desc_list3 desc_list3; /*< 40: 8> List of generic data descriptors */ } T_CCI_CIPHER_DESC_REQ; #endif /* --------------------------------------------------------------------------------- */ /* * LLC global typedefs */ typedef UBYTE T_BIT_INT; typedef T_BIT_INT T_BIT; /* * T_FRAME_NUM must be unsigned! */ typedef USHORT T_FRAME_NUM; /* * FRAME_NUM_VALID(a, b, c) equal to ETSI: a <= b <= c */ #define FRAME_NUM_VALID(a,b,c) ( (((T_FRAME_NUM)((b)-(a)))%(MAX_SEQUENCE_NUMBER+1)) <= \ (((T_FRAME_NUM)((c)-(a)))%(MAX_SEQUENCE_NUMBER+1)) ) /* * FRAME_WIN_VALID(a, b, k) equal to ETSI: a < b + k */ #define FRAME_WIN_VALID(a,b,k) ( (((T_FRAME_NUM)((a)-(b)))%(MAX_SEQUENCE_NUMBER+1)) < (k) ) /* * FRAME_NUM_DISTANCE(a,b) equal to b - a for frame nums */ #define FRAME_NUM_DISTANCE(a,b) ((T_FRAME_NUM)((b)-(a))%(MAX_SEQUENCE_NUMBER+1)) typedef struct { UBYTE data[S_FRAME_SACK_MAX_CTRL_OCTETS]; } T_SACK_BITMAP; typedef enum { ABIT_NO_REQ, ABIT_SET_REQ } T_ABIT_REQ_TYPE; typedef enum { IQ_NO_FRAME, /* return code only */ IQ_NEW_FRAME, /* new in the queue */ IQ_RETR_FRAME, /* ITX - marked for retransmission */ IQ_W4ACK_FRAME, /* ITX - is send, but no ack up to now */ IQ_IS_ACK_FRAME /* ITX - is ack and waiting for to be next in sequence */ } T_IQ_STATUS; typedef enum { NS_EQUAL_VR, NS_NO_SEQUENCE_ERROR, NS_EQUAL_VR_PLUS_1, NS_IN_RANGE_VR_KU } T_LAST_NS_TYPE; typedef enum { I_FRAME = I_FRAME_ID, S_FRAME = S_FRAME_ID, UI_FRAME = UI_FRAME_ID, U_FRAME = U_FRAME_ID } T_PDU_TYPE; typedef enum { /* * The values are chosen to correspond with the Sx and Mx bits in the frame * control field. Thus these commands can be used to build the header of a * frame. * NOTE: * Some I and U frame commands have the same value. */ #ifdef REL99 U_NULL = U_FRAME_NULL, #endif /* REL99 */ I_RR = I_FRAME_RR, I_ACK = I_FRAME_ACK, I_RNR = I_FRAME_RNR, I_SACK = I_FRAME_SACK, U_SABM = U_FRAME_SABM, U_DISC = U_FRAME_DISC, U_UA = U_FRAME_UA, U_DM = U_FRAME_DM, U_FRMR = U_FRAME_FRMR, U_XID = U_FRAME_XID } T_COMMAND; typedef enum { NO_SERVICE, SERVICE_LLME, SERVICE_ITX, SERVICE_IRX, SERVICE_UITX, SERVICE_UIRX, SERVICE_U, SERVICE_TX, SERVICE_RX, SERVICE_T200 } T_SERVICE; typedef enum { PRIM_DATA, PRIM_UNITDATA, PRIM_REMOVED, NO_PRIM } T_PRIM_TYPE; typedef enum { EXPIRY_TIMED, EXPIRY_REQUESTED } T_EXPIRY_MODE_TYPE; /* * Don't use enum for SAPI, because that's larger in size than UBYTE. */ typedef UBYTE T_SAPI; #define SAPI_1 LL_SAPI_1 #define SAPI_2 LL_SAPI_INVALID #define SAPI_3 LL_SAPI_3 #define SAPI_4 LL_SAPI_INVALID #define SAPI_5 LL_SAPI_5 #define SAPI_6 LL_SAPI_INVALID #define SAPI_7 LL_SAPI_7 #define SAPI_8 LL_SAPI_INVALID #define SAPI_9 LL_SAPI_9 #define SAPI_10 LL_SAPI_INVALID #define SAPI_11 LL_SAPI_11 #define SAPI_12 LL_SAPI_INVALID #define SAPI_13 LL_SAPI_INVALID #define SAPI_14 LL_SAPI_INVALID #define SAPI_15 LL_SAPI_INVALID /* * Indicates which primitive to use after successful (re-)establishment: * LL_ESTABLISH_IND/CNF */ typedef UBYTE T_ESTABLISHMENT; #define IND_ESTABLISHMENT 1 #define CNF_ESTABLISHMENT 2 /* * Local TX transmit queue. * NOTE: * The ph_* variables must exactly match the types of T_GRLC_DATA_REQ / * T_GRLC_UNITDATA_REQ. */ typedef struct T_TX_QUEUE_ELEMENT { struct T_TX_QUEUE_ELEMENT *next; /* pointer to next element */ ULONG primitive; /* stored primitive */ ULONG reference; /* entry reference number */ T_PRIM_TYPE prim_type; /* primitive type */ UBYTE ph_sapi; /* primitive header: sapi */ ULONG ph_tlli; /* tlli */ UBYTE ph_grlc_qos_peak; /* grlc_qos.peak */ UBYTE ph_radio_prio; /* radio_prio */ UBYTE ph_cause; /* cause */ T_SERVICE rx_service; /* flow control service */ BOOL remove_frame; /* TRUE: frame has to remove */ #ifdef REL99 UBYTE ph_pkt_flow_id; /* packet flow identifier */ #endif /* REL99 */ } T_TX_QUEUE; typedef struct T_ITX_I_QUEUE_ENTRY { struct T_ITX_I_QUEUE_ENTRY *next; /* pointer to next element */ #ifdef LL_DESC T_LL_DESC_REQ* frame; /* pointer to L3 prim */ #else T_LL_DATA_REQ* frame; /* pointer to L3 prim */ #endif USHORT n_retr; /* retransmission counter */ T_IQ_STATUS status; /* status flag */ T_FRAME_NUM ns; /* send sequence number N(S) */ ULONG oc_i_tx; /* OC to use for this N(S) */ /* * Copy of original LL_DATA_REQ parameter for attached_counter handling */ #ifdef LL_2to1 T_PS_qos_r97 ll_qos; /* quality of service */ T_LL_reference1 reference; /* ciphering indicator */ #else T_ll_qos ll_qos; /* quality of service */ T_reference1 reference; /* ciphering indicator */ #endif #ifdef REL99 UBYTE pkt_flow_id; /*Packet Flow Identifier */ #endif /* REL99 */ #ifdef LL_DESC USHORT offset; /* Offset of buffer */ USHORT len; /* Length of buffer */ #else USHORT sdu_o_buf; /* Offset of SDU data */ USHORT sdu_l_buf; /* Length of SDU data */ #endif UBYTE radio_prio; /* Radio Priority */ UBYTE seg_pos; /* First and/or last seg? */ } T_ITX_I_QUEUE_ENTRY; typedef struct { struct T_ITX_I_QUEUE_ENTRY *first; /* pointer to first element */ USHORT entries; /* number of Queue enties */ } T_ITX_I_QUEUE; typedef struct T_ITX_S_QUEUE_ENTRY { struct T_ITX_S_QUEUE_ENTRY *next; /* pointer to next element */ T_COMMAND sx; /* Supervisiory command Sx */ T_ABIT_REQ_TYPE rt; /* A bit request flag */ T_FRAME_NUM nr; /* N(R) of command */ T_SACK_BITMAP bitmap; /* SACK bitmap */ } T_ITX_S_QUEUE_ENTRY; typedef struct T_IRX_QUEUE { struct T_IRX_QUEUE *next; /* pointer to next element */ T_LL_UNITDATA_IND* frame; /* pointer to L3 prim */ T_FRAME_NUM ns; /* received frame number N(S) */ } T_IRX_QUEUE; typedef struct T_UIRX_QUEUE { struct T_UIRX_QUEUE *next; /* pointer to next element */ T_LL_UNITDATA_IND* frame; /* pointer to L3 prim */ } T_UIRX_QUEUE; typedef struct /* T_XID_PARAMETERS */ { struct /* Version */ { BOOL valid; UBYTE value; } version; struct /* IOV-UI */ { BOOL valid; ULONG value; } iov_ui; struct /* IOV-I */ { BOOL valid; ULONG value; } iov_i; struct /* T200 */ { BOOL valid; USHORT value; } t200; struct /* N200 */ { BOOL valid; UBYTE value; } n200; struct /* N201-U */ { BOOL valid; USHORT value; } n201_u; struct /* N201-I */ { BOOL valid; USHORT value; } n201_i; struct /* mD */ { BOOL valid; USHORT value; } md; struct /* mU */ { BOOL valid; USHORT value; } mu; struct /* kD */ { BOOL valid; UBYTE value; } kd; struct /* kU */ { BOOL valid; UBYTE value; } ku; struct /* Reset */ { BOOL valid; } reset; } T_XID_PARAMETERS; typedef struct /* T_FFS_XID_PARAMETERS */ { struct /* T200 */ { BOOL valid; USHORT value; } t200[UNACKNOWLEDGED_INC]; struct /* N200 */ { BOOL valid; UBYTE value; } n200[UNACKNOWLEDGED_INC]; struct /* N201-U */ { BOOL valid; USHORT value; } n201_u[UNACKNOWLEDGED_INC]; struct /* N201-I */ { BOOL valid; USHORT value; } n201_i[ACKNOWLEDGED_INC]; struct /* mD */ { BOOL valid; USHORT value; } md[ACKNOWLEDGED_INC]; struct /* mU */ { BOOL valid; USHORT value; } mu[ACKNOWLEDGED_INC]; struct /* kD */ { BOOL valid; UBYTE value; } kd[ACKNOWLEDGED_INC]; struct /* kU */ { BOOL valid; UBYTE value; } ku[ACKNOWLEDGED_INC]; } T_FFS_XID_PARAMETERS; typedef struct /* T_LLME_DATA */ { UBYTE state; /* * Required for state traces. */ #ifndef NTRACE char *name; char *state_name; #endif } T_LLME_DATA; typedef struct /* T_U_DATA */ { UBYTE state; /* * Required for state traces. */ #ifndef NTRACE char *name; char *state_name; #endif /* * TLLI of current transaction (is set with incoming primitives, time-outs, * and signals with primitive payload). */ ULONG current_tlli; /* * Number of retransmissions per sent command frame. */ UBYTE retransmission_counter; /* * If LLC receives an release request from Layer 3 and is not able to confirm * the request immediately, release_requested has to be set to TRUE. */ UBYTE release_requested; /* * Send LL_ESTABLISH_IND/CNF after successful establishment. */ T_ESTABLISHMENT ind_cnf_establishment; /* * Indicates if XID command has been sent. */ BOOL xid_pending; /* * Indicates that an LL_XID_IND has been sent. */ BOOL ll_xid_resp_pending; /* * Reason of frame rejection condition. */ UBYTE frmr_reason; /* * Used to tag parameters for the next XID response. This is done by * setting the corresponding bit (with the definitions from llc_uf.h) to 1. * This variable is initialised by llme_init(), and with every call of * u_eval_xid(). */ ULONG xid_tag; /* * Tags parameters for further negotiation that have not been included in * the XID command but are included in the XID response. These parameters * have to be included in every XID response until the parameter has been * explicitly negotiated, either by responding to an XID command that * included the parameter, or by explicitly including the parameter * the next time an XID command is transmitted. * <R.LLC.XIDNEG_R.A.015> * This variable is initialised by llme_init(). */ ULONG xid_tag_negotiate; /* * Used to tag parameters that have actually been sent in the last command * or response frame. It is used for collision checks and the like. * This variable is initialised by llme_init(), and with every call of * u_insert_xid(). */ ULONG xid_tag_sent; /* * Structure to contain XID parameters that are requested to be negotiated. * Valid flags are initialised by llme_init(), and are being reset when * the parameter has explicitly been included in a response. */ T_XID_PARAMETERS requested_xid; } T_U_DATA; typedef struct /* T_ITX_DATA */ { UBYTE state; /* * Required for state traces. */ #ifndef NTRACE char *name; char *state_name; #endif BOOL tx_waiting; BOOL buffer_was_full; /* * I frame buffer size variables: Total length of * transmitted and not acknowlegded information fields. */ ULONG B_tx; /* * Local transmit queues for I- and S frames */ T_ITX_I_QUEUE i_queue; T_ITX_S_QUEUE_ENTRY *s_queue; /* * T201 Data */ T_ITX_I_QUEUE_ENTRY *t201_entry; USHORT n_pb_retr; } T_ITX_DATA; typedef struct /* T_IRX_DATA */ { UBYTE state; /* * Required for state traces. */ #ifndef NTRACE char *name; char *state_name; #endif /* * I frame buffer size variables: Total length of * stored information fields. */ ULONG B_rx; /* * Next frame number to forward to L3 */ T_FRAME_NUM vf; /* * L3 ready to receive a data indication flag */ BOOL ll_send_ready; T_LAST_NS_TYPE last_ns; T_IRX_QUEUE *queue; } T_IRX_DATA; typedef struct /* T_UITX_DATA */ { UBYTE state; /* * Required for state traces. */ #ifndef NTRACE char *name; char *state_name; #endif /* * Unacknowledged send sequence number */ T_FRAME_NUM vu; } T_UITX_DATA; typedef struct /* T_UIRX_DATA */ { UBYTE state; /* * Required for state traces. */ #ifndef NTRACE char *name; char *state_name; #endif /* * Bit field for received N(U) values, relative to V(UR). */ ULONG last_32_frames_bitfield; T_UIRX_QUEUE *queue; } T_UIRX_DATA; typedef struct /* T_T200_DATA */ { UBYTE state; /* * Required for state traces. */ #ifndef NTRACE char *name; char *state_name; #endif /* * Length of timer T200 in milliseconds (is negotiated in 0.1s!). * LLC layer parameter. */ T_TIME length; /* * The frame which is associated with the timer, the RLC/MAC cause of the * frame, and the service that started the timer. This is the t200_data * array of SDL. */ #ifdef LL_DESC T_LL_UNITDESC_REQ *frame; #else T_LL_UNITDATA_REQ *frame; #endif UBYTE cause; T_SERVICE originator; } T_T200_DATA; typedef struct /* T_TX_DATA */ { UBYTE state; /* * Required for state traces. */ #ifndef NTRACE char *name; char *state_name; #endif /* * Local transmit queue (single-linked dynamic list). */ T_TX_QUEUE *queue; /* * Counter of available space for UITX primitives in the queue. */ UBYTE queue_counter_itx[ITX_NUM_INC]; UBYTE queue_counter_uitx[UITX_NUM_INC]; } T_TX_DATA; typedef struct /* T_RX_DATA */ { UBYTE state; /* * Required for state traces. */ #ifndef NTRACE char *name; char *state_name; #endif } T_RX_DATA; typedef struct /* T_SAPI_DATA */ { /* * Unacknowledged receive sequence numbers (0..511) */ T_FRAME_NUM vur; T_FRAME_NUM last_vur; /* * Acknowledged mode frame numbers (0..511) */ T_FRAME_NUM vr; T_FRAME_NUM va; T_FRAME_NUM vs; /* * Binary overflow counters for acknowledged/unacknowledged mode and * uplink/downlink. These variables are initialised with llme_init(), * and the unacknowledged OCs are reset when XID reset has been received. */ ULONG oc_ui_tx; ULONG oc_ui_rx; ULONG oc_i_tx; ULONG oc_i_rx; /* * pbit_outstanding set to TRUE indicates that a frame with P bit set to 1 * is currently outstanding */ BOOL pbit_outstanding; } T_SAPI_DATA; typedef struct /* Layer 3 */ { BOOL valid; UBYTE length; #ifdef LL_2to1 UBYTE value[LL_MAX_L3_XID_LEN]; #else UBYTE value[LLC_MAX_L3_XID_LEN]; #endif } T_L3_XID; /* * CCI global typedefs */ typedef enum { CIPHER_REQ, DECIPHER_REQ, NO_REQ } T_CCI_PRIM_TYPE; /* CCI data base */ typedef struct /*T_FBS_SERVICE */ { UBYTE state; #ifndef NTRACE char *name; char *state_name; #endif USHORT volatile *cntl_reg; USHORT volatile *status_reg; USHORT volatile *status_irq_reg; USHORT volatile *conf_ul_reg1; USHORT volatile *conf_ul_reg2; USHORT volatile *conf_ul_reg3; USHORT volatile *conf_ul_reg4; USHORT volatile *conf_ul_reg5; USHORT volatile *conf_dl_reg1; USHORT volatile *conf_dl_reg2; USHORT volatile *conf_dl_reg3; USHORT volatile *conf_dl_reg4; USHORT volatile *conf_dl_reg5; USHORT volatile *kc_reg1; USHORT volatile *kc_reg2; USHORT volatile *kc_reg3; USHORT volatile *kc_reg4; USHORT volatile *fcs_ul_reg1; USHORT volatile *fcs_ul_reg2; USHORT volatile *fcs_dl_reg1; USHORT volatile *fcs_dl_reg2; #if (BOARD == 61 OR BOARD == 71) /* G-Sample or I-Sample */ USHORT volatile *switch_reg; #endif USHORT volatile *data16_reg; UBYTE volatile *data8_reg; #ifdef _GEA_SIMULATION_ UBYTE *simulated_reg; UBYTE *simulated_reg_buffer; #endif /*primitives should also be defined as global */ #ifdef LL_DESC T_CCI_CIPHER_DESC_REQ *cci_cipher_req; #else T_CCI_CIPHER_REQ *cci_cipher_req; #endif T_CCI_DECIPHER_REQ *cci_decipher_req; #ifndef TI_PS_OP_CIPH_DRIVER T_CIPH_init_cipher_req_parms ciph_params; BOOL initialized; #endif ULONG cci_freed_partition; BOOL cci_info_trace; } T_FBS_DATA; typedef struct /* T_LLC_DATA */ { /* * Indicates LLC is suspended or not (default). * This variable is initialised by llme_init(). */ BOOL suspended; /* * Indicates LLC that GRLC is suspended or not (default). * This variable is initialised by llme_init(). */ BOOL grlc_suspended; /* * Current SAPI number. This is used for outgoing primitives. It is set * with each external event, like an incoming primitive or a time-out. */ T_SAPI current_sapi; /* * TLLI New and TLLI Old. These are set by GMM via LLGMM_ASSIGN_REQ. * TLLI New is used for sending primitives (if the upper layer did not * already specify the TLLI). TLLI Old is currently unused. * Both variables are initialised by llme_init(). */ ULONG tlli_new; ULONG tlli_old; /* * LLC layer parameters (according to GSM 04.64, Version 6.4.0). These * parameters are initialised by llc_init_parameters(). */ UBYTE version; ULONG iov_ui; ULONG iov_i_base[ACKNOWLEDGED_INC]; ULONG *iov_i; /* * T200 and T201 values are defined in the respective service data arrays. */ UBYTE n200_base[UNACKNOWLEDGED_INC]; UBYTE *n200; USHORT n201_u_base[UNACKNOWLEDGED_INC]; USHORT n201_i_base[ACKNOWLEDGED_INC]; USHORT *n201_u; USHORT *n201_i; USHORT md_base[ACKNOWLEDGED_INC]; USHORT mu_base[ACKNOWLEDGED_INC]; USHORT *md; USHORT *mu; UBYTE kd_base[ACKNOWLEDGED_INC]; UBYTE ku_base[ACKNOWLEDGED_INC]; UBYTE *kd; UBYTE *ku; T_L3_XID requested_l3_xid_base[ACKNOWLEDGED_INC]; T_L3_XID *requested_l3_xid; /* * Structure to contain decoded XID parameters. * Valid flags are initialized by u_check_xid() each time received XID * is checked. */ T_XID_PARAMETERS decoded_xid; T_L3_XID decoded_l3_xid; /* * LLC layer variables needed for ciphering (see services TX/RX). These * variables are set with LLGMM_ASSIGN_REQ by GMM. */ #ifdef LL_2to1 T_LLGMM_llgmm_kc kc; #else T_llgmm_kc kc; #endif UBYTE ciphering_algorithm; /* * Service data structures. * * Services with multiple incarnations require an array of structures * named xxx_base[] with xxx = service abbrevation, and additionally a * pointer named *xxx, which will be accessed instead of xxx_base. * * Services with only one incarnation just have to declare one structure * named xxx (no need for xxx_base[] and *xxx). * * The differentiation between the two access possibilites is made with * the defines of the service names above (LLC_SERVICE_XXX). */ T_LLME_DATA llme; T_SAPI_DATA sapi_base[MAX_SAPI_INC]; T_SAPI_DATA *sapi; T_U_DATA u_base[U_NUM_INC]; T_U_DATA *u; T_ITX_DATA itx_base[ITX_NUM_INC]; T_IRX_DATA irx_base[IRX_NUM_INC]; T_ITX_DATA *itx; T_IRX_DATA *irx; T_UITX_DATA uitx_base[UITX_NUM_INC]; T_UIRX_DATA uirx_base[UIRX_NUM_INC]; T_UITX_DATA *uitx; T_UIRX_DATA *uirx; T_T200_DATA t200_base[T200_NUM_INC]; T_T200_DATA *t200; T_TX_DATA tx; T_RX_DATA rx; T_FBS_DATA fbs; #ifdef _SIMULATION_ /* * Structure to contain XID parameters that are configured in ffs. */ T_FFS_XID_PARAMETERS ffs_xid; #endif /*Number of milliseconds to delay after sending reset_ind to SNDCP*/ USHORT millis; #ifdef REL99 U16 cur_pfi; /* current packet flow identifier */ #endif T_ll_qos cur_qos; /* quality of service R97 */ U8 cur_radio_prio; /* T_PS_radio_prio, Radio priority */ } T_LLC_DATA; /*==== EXPORT =====================================================*/ /* * Entity data base */ #ifdef LLC_PEI_C T_LLC_DATA llc_data_base, *llc_data; #else EXTERN T_LLC_DATA llc_data_base, *llc_data; #endif #define ENTITY_DATA llc_data /* * Communication handles (see also LLC_PEI.C) */ #define hCommGMM llc_hCommGMM #define hCommSNDCP llc_hCommSNDCP #ifdef LL_2to1 #define hCommMM llc_hCommMM #else #define hCommGSMS llc_hCommGSMS #endif #define hCommGRLC llc_hCommGRLC #ifdef LLC_PEI_C T_HANDLE hCommGMM = VSI_ERROR; T_HANDLE hCommSNDCP = VSI_ERROR; #ifdef LL_2to1 T_HANDLE hCommMM = VSI_ERROR; #else T_HANDLE hCommGSMS = VSI_ERROR; #endif T_HANDLE hCommGRLC = VSI_ERROR; T_HANDLE LLC_handle; /* * make the pei_create function unique */ #define pei_create llc_pei_create #else EXTERN T_HANDLE hCommGMM; EXTERN T_HANDLE hCommSNDCP; #ifdef LL_2to1 EXTERN T_HANDLE hCommMM; #else EXTERN T_HANDLE hCommGSMS; #endif EXTERN T_HANDLE hCommGRLC; EXTERN T_HANDLE LLC_handle; #endif /* LLC_PEI_C */ #endif /* LLC_H */