view cdg211/cdginc/m_grlc.val @ 662:8cd8fd15a095

SIM speed enhancement re-enabled and made configurable TI's original code supported SIM speed enhancement, but Openmoko had it disabled, and OM's disabling of speed enhancement somehow caused certain SIM cards to start working which didn't work before (OM's bug #666). Because our FC community is much smaller in year 2020 than OM's community was in their day, we are not able to find one of those #666-affected SIMs, thus the real issue they had encountered remains elusive. Thus our solution is to re-enable SIM speed enhancement and simply wait for if and when someone runs into a #666-affected SIM once again. We provide a SIM_allow_speed_enhancement global variable that allows SIM speed enhancement to be enabled or disabled per session, and an /etc/SIM_spenh file in FFS that allows it to enabled or disabled on a non-volatile basis. SIM speed enhancement is now enabled by default.
author Mychaela Falconia <falcon@freecalypso.org>
date Sun, 24 May 2020 05:02:28 +0000
parents 56abf6cf8a0b
children
line wrap: on
line source

/*
+--------------------------------------------------------------------------+
| PROJECT : PROTOCOL STACK                                                 |
| FILE    : m_grlc.val                                                     |
| SOURCE  : "__out__\g23m_dfile\msg\grlc.mdf"                              |
| LastModified : "2003-03-26"                                              |
| IdAndVersion : "8441.601.99.001"                                         |
| SrcFileTime  : "Thu Feb 17 14:27:10 2005"                                |
| Generated by CCDGEN_2.5.5 on Fri Jun 08 13:59:14 2007                    |
|           !!DO NOT MODIFY!!DO NOT MODIFY!!DO NOT MODIFY!!                |
+--------------------------------------------------------------------------+
*/

/* PRAGMAS
 * PREFIX                 : NONE
 * COMPATIBILITY_DEFINES  : NO (require PREFIX)
 * ALWAYS_ENUM_IN_VAL_FILE: NO
 * ENABLE_GROUP: NO
 * CAPITALIZE_TYPENAME: NO
 */


#ifndef M_GRLC_VAL
#define M_GRLC_VAL


#define CDG_ENTER__M_GRLC_VAL

#define CDG_ENTER__FILENAME _M_GRLC_VAL
#define CDG_ENTER__M_GRLC_VAL__FILE_TYPE CDGINC
#define CDG_ENTER__M_GRLC_VAL__LAST_MODIFIED _2003_03_26
#define CDG_ENTER__M_GRLC_VAL__ID_AND_VERSION _8441_601_99_001

#define CDG_ENTER__M_GRLC_VAL__SRC_FILE_TIME _Thu_Feb_17_14_27_10_2005

#include "CDG_ENTER.h"

#undef CDG_ENTER__M_GRLC_VAL

#undef CDG_ENTER__FILENAME

#include "m_rr_com.val"   /* Access values independent from the corresponding h-file. */


/*
 * Value constants for VAL_final_alloc
 */
#define NO                             (0x0)      /* not present                    */
#define YES                            (0x1)      /* present                        */

/*
 * Value constants for VAL_msg_type
 */
#define U_GRLC_RESOURCE_REQ_c          (0x5)      /* Packet Resource Request        */
#define U_GRLC_DL_ACK_c                (0x2)      /* Packet Downlink Ack/Nack       */
#define D_GRLC_UL_ACK_c                (0x9)      /* Packet Uplink Ack/Nack         */
#define U_GRLC_CTRL_ACK_c              (0x1)      /* Packet Control Acknowledgement */
#define U_GRLC_UL_DUMMY_c              (0x3)      /* Packet Uplink Dummy Control Block */

/*
 * Value constants for VAL_page_mode
 */
#define NORMAL_PAGING                  (0x0)      /* Normal Paging                  */
#define EXT_PAGING                     (0x1)      /* Extended Paging                */
#define REORG_PAGING                   (0x2)      /* Paging Reorganisation          */
#define SAME_PAGING                    (0x3)      /* Same as before                 */

/*
 * Value constants for VAL_access_type
 */
#define TWO_PHASE                      (0x0)      /* Two Phase Access Request       */
#define PAGE                           (0x1)      /* Page Response                  */
#define CELL_UPDATE                    (0x2)      /* Cell Update                    */
#define MM_PROC                        (0x3)      /* Mobility Management procedure  */

/*
 * Value constants for VAL_chan_coding_cmd
 */
#define VAL_CHAN_CODING_CMD___0        (0x0)      /* CS-1                           */
#define VAL_CHAN_CODING_CMD___1        (0x1)      /* CS-2                           */
#define VAL_CHAN_CODING_CMD___2        (0x2)      /* CS-3                           */
#define VAL_CHAN_CODING_CMD___3        (0x3)      /* CS-4                           */

/*
 * Value constants for VAL_rlc_mode
 */
#define VAL_RLC_MODE___0               (0x0)      /* RLC acknowledged mode          */
#define VAL_RLC_MODE___1               (0x1)      /* RLC unacknowledged mode        */

/*
 * Value constants for VAL_pctrl_ack
 */
#define VAL_PCTRL_ACK___0              (0x0)      /* reserved - this value shall not be sent. If received it shall be interpreted as bit value '1'. */
#define VAL_PCTRL_ACK___1              (0x1)      /* the MS received an RLC/MAC control block addressed to itself and with RBSN = 1, and did not receive an RLC/MAC control block with the same RTI value and RBSN = 0. */
#define VAL_PCTRL_ACK___2              (0x2)      /* the MS received an RLC/MAC control block addressed to itself and with RBSN = 0, and did not receive an RLC/MAC control block with the same RTI value and RBSN = 1. This value is sent irrespective of the value of the FS bit. */
#define VAL_PCTRL_ACK___3              (0x3)      /* the MS received two RLC/MAC blocks with the same RTI value, one with RBSN = 0 and the other with RBSN = 1. */

/*
 * Value constants for VAL_alpha
 */
#define VAL_ALPHA___0                  (0x0)      /* Alpha = 0.0                    */
#define VAL_ALPHA___1                  (0x1)      /* Alpha = 0.1                    */
#define VAL_ALPHA___2                  (0x2)      /* Alpha = 0.2                    */
#define VAL_ALPHA___3                  (0x3)      /* Alpha = 0.3                    */
#define VAL_ALPHA___4                  (0x4)      /* Alpha = 0.4                    */
#define VAL_ALPHA___5                  (0x5)      /* Alpha = 0.5                    */
#define VAL_ALPHA___6                  (0x6)      /* Alpha = 0.6                    */
#define VAL_ALPHA___7                  (0x7)      /* Alpha = 0.7                    */
#define VAL_ALPHA___8                  (0x8)      /* Alpha = 0.8                    */
#define VAL_ALPHA___9                  (0x9)      /* Alpha = 0.9                    */
#define VAL_ALPHA___A                  (0xa)      /* Alpha = 1.0                    */

/*
 * Value constants for VAL_radio_prio
 */
#define VAL_RADIO_PRIO___0             (0x0)      /* Radio Priority 1 (Highest priority) */
#define VAL_RADIO_PRIO___1             (0x1)      /* Radio Priority 2               */
#define VAL_RADIO_PRIO___2             (0x2)      /* Radio Priority 3               */
#define VAL_RADIO_PRIO___3             (0x3)      /* Radio Priority 4 (Lower priority) */

/*
 * Value constants for VAL_llc_pdu_type
 */
#define VAL_LLC_PDU_TYPE___0           (0x0)      /* LLC PDU is SACK or ACK         */
#define VAL_LLC_PDU_TYPE___1           (0x1)      /* LLC PDU is not SACK or ACK     */

/*
 * Value constants for VAL_bl_o_bl_per
 */
#define BLOCKS                         (0x0)      /* ALLOCATION_BITMAP is to be interpreted as blocks */
#define BLOCK_PERIODS                  (0x1)      /* ALLOCATION_BITMAP is to be interpreted as block periods */

/*
 * Value constants for VAL_rbb
 */
#define INVALID                        (0x0)      /* Negative Ack of the RLC data block with BSN=(SSN-bit_nr)mod128 */
#define RECEIVED                       (0x1)      /* Positive Ack of the RLC data block with BSN=(SSN-bit_nr)mod128 */

/*
 * Value constants for VAL_f_ack_ind
 */
#define VAL_F_ACK_IND___0              (0x0)      /* retransmission are requested and the TBF is incomplete */
#define VAL_F_ACK_IND___1              (0x1)      /* no retransmissions are requested and this message indicates acknowledgement of all RLC data in the TBF */

#include "CDG_LEAVE.h"


#endif