FreeCalypso > hg > fc-magnetite
view cdg211/cdginc/p_mncc.val @ 662:8cd8fd15a095
SIM speed enhancement re-enabled and made configurable
TI's original code supported SIM speed enhancement, but Openmoko had it
disabled, and OM's disabling of speed enhancement somehow caused certain
SIM cards to start working which didn't work before (OM's bug #666).
Because our FC community is much smaller in year 2020 than OM's community
was in their day, we are not able to find one of those #666-affected SIMs,
thus the real issue they had encountered remains elusive. Thus our
solution is to re-enable SIM speed enhancement and simply wait for if
and when someone runs into a #666-affected SIM once again. We provide
a SIM_allow_speed_enhancement global variable that allows SIM speed
enhancement to be enabled or disabled per session, and an /etc/SIM_spenh
file in FFS that allows it to enabled or disabled on a non-volatile
basis. SIM speed enhancement is now enabled by default.
| author | Mychaela Falconia <falcon@freecalypso.org> |
|---|---|
| date | Sun, 24 May 2020 05:02:28 +0000 |
| parents | 56abf6cf8a0b |
| children |
line wrap: on
line source
/* +--------------------------------------------------------------------------+ | PROJECT : PROTOCOL STACK | | FILE : p_mncc.val | | SOURCE : "__out__\g23m_dfile\prim\mncc.pdf" | | LastModified : "2003-07-03" | | IdAndVersion : "6147.101.96.116" | | SrcFileTime : "Tue Jan 31 13:13:54 2006" | | Generated by CCDGEN_2.5.5 on Fri Jun 08 13:59:15 2007 | | !!DO NOT MODIFY!!DO NOT MODIFY!!DO NOT MODIFY!! | +--------------------------------------------------------------------------+ */ /* PRAGMAS * PREFIX : NONE * COMPATIBILITY_DEFINES : NO (require PREFIX) * ALWAYS_ENUM_IN_VAL_FILE: NO * ENABLE_GROUP: NO * CAPITALIZE_TYPENAME: NO */ #ifndef P_MNCC_VAL #define P_MNCC_VAL #define CDG_ENTER__P_MNCC_VAL #define CDG_ENTER__FILENAME _P_MNCC_VAL #define CDG_ENTER__P_MNCC_VAL__FILE_TYPE CDGINC #define CDG_ENTER__P_MNCC_VAL__LAST_MODIFIED _2003_07_03 #define CDG_ENTER__P_MNCC_VAL__ID_AND_VERSION _6147_101_96_116 #define CDG_ENTER__P_MNCC_VAL__SRC_FILE_TIME _Tue_Jan_31_13_13_54_2006 #include "CDG_ENTER.h" #undef CDG_ENTER__P_MNCC_VAL #undef CDG_ENTER__FILENAME /* * Value constants for VAL_ti */ #define TI_RES_1 (0x7) /* reserved */ #define TI_RES_2 (0xf) /* reserved */ /* * Value constants for VAL_progress_desc */ #define PROG_NO_END_TO_END_PLMN (0x1) /* call is not end-to-end PLMN/ISDN, further call progress information may be available in-band */ #define PROG_DEST_NON_PLMN (0x2) /* destination address in non-PLMN/ISDN */ #define PROG_ORIGIN_NON_PLMN (0x3) /* origination address in non-PLMN/ISDN */ #define PROG_RETURN_TO_PLMN (0x4) /* call has returned to the PLMN/ISDN */ #define PROG_INBAND_AVAIL (0x8) /* in-band information or appropriate pattern now available */ #define PROG_END_TO_END_PLMN (0x20) /* call is end-to-end PLMN/ISDN */ #define PROG_QUEUEING (0x40) /* queueing */ #define PROG_UNSPECIFIC (0xfe) /* unspecific, used when coding standard is not equal to GSM; note that the value chosen here must not collide with any defined value of the progress description IE of the air interface */ #define PROG_NOT_PRES (0xff) /* not present */ /* * Value constants for VAL_fac_context */ #define FAC_IN_ALERT (0x0) /* Facility information in ALERT message */ #define FAC_IN_CALL_PROCEED (0x1) /* Facility information in CALL PROCEEDING message */ #define FAC_IN_DISCONNECT (0x2) /* Facility information in DISCONNECT message */ #define FAC_IN_RELEASE (0x3) /* Facility information in RELEASE message */ #define FAC_IN_CONNECT (0x4) /* Facility information in CONNECT message */ #define FAC_IN_SETUP (0x5) /* Facility information in SETUP message */ #define FAC_IN_FACILITY (0x6) /* Facility information in USER INFORMATION message */ #define FAC_IN_RELEASE_COMP (0x7) /* Facility information in RELEASE COMPLETE message */ #define FAC_IN_RECALL (0x8) /* Facility information in RECALL message */ /* * Value constants for VAL_info_context */ #define USER_IN_ALERT (0x0) /* User information in ALERT message */ #define USER_IN_DISCONNECT (0x1) /* User information in DISCONNECT message */ #define USER_IN_PROGRESS (0x2) /* User information in PROGRESS message */ #define USER_IN_RELEASE (0x3) /* User information in RELEASE message */ #define USER_IN_CONNECT (0x4) /* User information in CONNECT message */ #define USER_IN_SETUP (0x5) /* User information in SETUP message */ #define USER_IN_USER (0x6) /* User information in USER INFORMATION message */ /* * Value constants for VAL_pd */ #define PD_USER (0x0) /* user specific protocol */ #define PD_HIGH_LAYER (0x1) /* OSI high layer protocols */ #define PD_X244 (0x2) /* X.244 */ #define PD_SYS_MANAGE (0x3) /* reserved for system management convergence function */ #define PD_IA5 (0x4) /* IA5 characters */ #define PD_V120 (0x7) /* Rec.V.120 rate adaption */ #define PD_Q931 (0x8) /* Q.931 (I.451) user-network call control messages */ /* * Value constants for VAL_serv */ #define SERV_SPEECH (0x0) /* speech */ #define SERV_DATA (0x1) /* data */ #define SERV_NOT_PRES (0xff) /* not present */ /* * Value constants for VAL_cause */ #define MNCC_CAUSE_UNASSIGN (0x501) /* unassigned (unallocated) number */ #define MNCC_CAUSE_NO_ROUTE (0x503) /* no route to destination */ #define MNCC_CAUSE_CHAN_UNACCEPT (0x506) /* channel unacceptable */ #define MNCC_CAUSE_BARRED (0x508) /* operator determined barring */ #define MNCC_CAUSE_CALL_CLEAR (0x510) /* normal call clearing */ #define MNCC_CAUSE_USER_BUSY (0x511) /* user busy */ #define MNCC_CAUSE_NO_RESPONSE (0x512) /* no user responding */ #define MNCC_CAUSE_ALERT_NO_ANSWER (0x513) /* user alerting, no answer */ #define MNCC_CAUSE_CALL_REJECT (0x515) /* call rejected */ #define MNCC_CAUSE_NUM_CHANGED (0x516) /* number changed */ #define MNCC_CAUSE_PREEMPTION (0x519) /* pre-emption */ #define MNCC_CAUSE_USER_CLEAR (0x51a) /* non selected user clearing */ #define MNCC_CAUSE_DEST_ORDER (0x51b) /* destination out of order */ #define MNCC_CAUSE_NUM_FORMAT (0x51c) /* invalid number format (incomplete number) */ #define MNCC_CAUSE_FACILITY_REJECT (0x51d) /* facility rejected */ #define MNCC_CAUSE_STATUS_ENQUIRY (0x51e) /* response to status enquiry */ #define MNCC_CAUSE_UNSPECIFIED (0x51f) /* normal, unspecified */ #define MNCC_CAUSE_NO_CHAN_AVAIL (0x522) /* no circuit / channel available */ #define MNCC_CAUSE_NETWORK_ORDER (0x526) /* network out of order */ #define MNCC_CAUSE_TEMP_FAIL (0x529) /* temporary failure */ #define MNCC_CAUSE_SWITCH_CONGEST (0x52a) /* switching equipment congestion */ #define MNCC_CAUSE_INFO_DISCARD (0x52b) /* access information discarded */ #define MNCC_CAUSE_REQ_CHAN_UNAVAIL (0x52c) /* requested circuit / channel not available */ #define MNCC_CAUSE_RESOURCE_UNAVAIL (0x52f) /* resources unavailable, unspecified */ #define MNCC_CAUSE_QOS_UNAVAIL (0x531) /* quality of service unavailable */ #define MNCC_CAUSE_FACILITY_UNSUBSCRIB (0x532) /* requested facility not subscribed */ #define MNCC_CAUSE_BARRED_IN_CUG (0x537) /* incoming calls barred within the CUG */ #define MNCC_CAUSE_BEARER_CAP_AUTHORIZ (0x539) /* bearer capability not authorized */ #define MNCC_CAUSE_BEARER_CAP_UNAVAIL (0x53a) /* bearer capability not presently available */ #define MNCC_CAUSE_SERVICE_UNAVAIL (0x53f) /* service or option not available, unspecified */ #define MNCC_CAUSE_BEARER_NOT_IMPLEM (0x541) /* bearer service not implemented */ #define MNCC_CAUSE_ACM_MAX (0x544) /* ACM equal or greater than ACMmax */ #define MNCC_CAUSE_FACILITY_NOT_IMPLEM (0x545) /* requested facility not implemented */ #define MNCC_CAUSE_RESTICT_BEARER_CAP (0x546) /* only restricted digital information bearer capability is available */ #define MNCC_CAUSE_SERVICE_NOT_IMPLEM (0x54f) /* service or option not implemented, unspecified */ #define MNCC_CAUSE_INVALID_TI (0x551) /* invalid transaction identifier value */ #define MNCC_CAUSE_USER_NOT_IN_CUG (0x557) /* user not member of CUG */ #define MNCC_CAUSE_INCOMPAT_DEST (0x558) /* incompatible destination (originated by net) */ #define MNCC_CAUSE_INVALID_TRANS_NET (0x55b) /* invalid transit network selection */ #define MNCC_CAUSE_INCORRECT_MESSAGE (0x55f) /* semantically incorrect message */ #define MNCC_CAUSE_INVALID_MAND_INFO (0x560) /* invalid mandatory information */ #define MNCC_CAUSE_MESSAGE_TYPE_NOT_IMPLEM (0x561)/* message type non-existent or not implemented */ #define MNCC_CAUSE_MESSAGE_TYPE_INCOMPAT (0x562) /* message type not compatible with protocol state */ #define MNCC_CAUSE_INFO_ELEM_NOT_IMPLEM (0x563) /* information element non-existent or not implemented */ #define MNCC_CAUSE_COND_INFO_ELEM (0x564) /* conditional information element error */ #define MNCC_CAUSE_MESSAGE_INCOMPAT (0x565) /* message not compatible with protocol state */ #define MNCC_CAUSE_TIMER (0x566) /* recovery on timer expiry */ #define MNCC_CAUSE_PROTOCOL (0x56f) /* protocol error, unspecified */ #define MNCC_CAUSE_INTERWORKING (0x57f) /* interworking, unspecified */ #define MNCC_CAUSE_MS_FACILITY_REJECT (0x451d) /* facility rejected (originated by MS) */ #define MNCC_CAUSE_MS_BEARER_NOT_IMPLEM (0x4541) /* bearer service not implemented (originated by MS) */ #define MNCC_CAUSE_MS_INVALID_TI (0x4551) /* invalid transaction identifier value (originated by MS) */ #define MNCC_CAUSE_MS_INCOMPAT_DEST (0x4558) /* incompatible destination (originated by MS) */ #define MNCC_CAUSE_MS_INVALID_MAND_INFO (0x4560) /* invalid mandatory information (originated by MS) */ #define MNCC_CAUSE_MS_COND_INFO_ELEM (0x4564) /* conditional information element error (originated by MS) */ #define MNCC_CAUSE_MS_MESSAGE_INCOMPAT (0x4565) /* message not compatible with protocol state (originated by MS) */ #define MNCC_CAUSE_MS_TIMER (0x4566) /* recovery on timer expiry (originated by MS) */ #define MNCC_CAUSE_MODIFY_SUCCESS (0x8500) /* in-call modification successfully performed, MODIFY COMPLETE message received */ #define MNCC_CAUSE_HOLD_SUCCESS (0x8502) /* hold successfully performed, HOLD ACKNOWLEDGE message received */ #define MNCC_CAUSE_RETRIEVE_SUCCESS (0x8503) /* retrieve successfully performed, RETRIEVE ACKNOWLEDGE message received */ #define MNCC_CAUSE_DTMF_START_SUCCESS (0x8504) /* start of DTMF successfully performed, START DTMF ACKNOWLEDGE message received */ #define MNCC_CAUSE_DTMF_STOP_SUCCESS (0x8505) /* stop of DTMF successfully performed, STOP DTMF ACKNOWLEDGE message received */ #define MNCC_CAUSE_NO_NET_CAUSE (0x85ff) /* network initiated without cause */ #define MNCC_CAUSE_SUCCESS (0xc500) /* operation successfully performed (e.g. a call establishment); this cause is used only if no more specific cause applies */ #define MNCC_CAUSE_DTMF_NOT_ALLOWED (0xc501) /* DTMF is currently not allowed (no speech TCH) */ #define MNCC_CAUSE_DTMF_BUFFER_FULL (0xc502) /* DTMF storage buffer overflow */ #define MNCC_CAUSE_DTMF_ABORTED (0xc503) /* DTMF was aborted (e.g. due to state change) */ #define MNCC_CAUSE_MAX_NO_RECALLS_REACHED (0xc504)/* maximum number of recalls (CCBS) was reached */ #define MNCC_CAUSE_MAX_NO_CALLS_REACHED (0xc505) /* maximum number of calls was reached */ #define MNCC_CAUSE_CHANNEL_SYNC (0xc506) /* channel mode or type information (changed) */ #define MNCC_CAUSE_REEST_STARTED (0xc507) /* call re-establishment started */ #define MNCC_CAUSE_REEST_FINISHED (0xc508) /* call re-establishment is finished */ #define MNCC_CAUSE_NO_MS_CAUSE (0xc5ff) /* MS initiated without cause */ /* * Value constants for VAL_nd */ #define ND_USER_SUSPEND (0x0) /* user suspended */ #define ND_USER_RESUME (0x1) /* user resumed */ #define ND_BEAR_CHANGE (0x2) /* bearer change */ #define ND_NOT_PRES (0xff) /* not present */ /* * Value constants for VAL_tos */ #define TOS_NSAP (0x0) /* NSAP (X.213/ISO 8348 AD2) */ #define TOS_USER_SPEC (0x2) /* user specified */ #define TOS_NOT_PRES (0xff) /* not present */ /* * Value constants for VAL_odd_even */ #define OE_EVEN (0x0) /* even number of address signals */ #define OE_ODD (0x1) /* odd number of address signals */ /* * Value constants for VAL_key */ #define DIG_0 (0x30) /* digit '0' */ #define DIG_1 (0x31) /* digit '1' */ #define DIG_2 (0x32) /* digit '2' */ #define DIG_3 (0x33) /* digit '3' */ #define DIG_4 (0x34) /* digit '4' */ #define DIG_5 (0x35) /* digit '5' */ #define DIG_6 (0x36) /* digit '6' */ #define DIG_7 (0x37) /* digit '7' */ #define DIG_8 (0x38) /* digit '8' */ #define DIG_9 (0x39) /* digit '9' */ #define DIG_A (0x41) /* 'A' */ #define DIG_B (0x42) /* 'B' */ #define DIG_C (0x43) /* 'C' */ #define DIG_D (0x44) /* 'D' */ #define DIG_STAR (0x2a) /* '(' */ #define DIG_HASH (0x23) /* '#' */ #define DIG_RES (0x7f) /* reserved */ /* * Value constants for VAL_ch_mode */ #define CHM_SIG_ONLY (0x0) /* signalling only */ #define CHM_SPEECH (0x1) /* speech full rate or half rate version 1 */ #define CHM_SPEECH_V2 (0x21) /* speech full rate or half rate version 2 */ #define CHM_SPEECH_V3 (0x41) /* speech full rate or half rate version 3 */ #define CHM_DATA_9_6 (0x3) /* data 9.6 kBit/s */ #define CHM_DATA_4_8 (0xb) /* data 4.8 kBit/s */ #define CHM_DATA_2_4 (0x13) /* data 2.4 kBit/s */ #define CHM_DATA_14_4 (0xf) /* data 2.4 kBit/s */ /* * Value constants for VAL_ch_type */ #define CH_SDCCH (0x0) /* SDCCH channel */ #define CH_TCH_F (0x1) /* TCH Fullrate */ #define CH_TCH_H (0x2) /* TCH Halfrate */ /* * Value constants for VAL_more_data */ #define MD_NO_MORE_DATA (0x0) /* no more data */ #define MD_MORE_DATA (0x1) /* more data */ #define MD_NOT_PRES (0xff) /* not present */ /* * Value constants for VAL_prio */ #define PRIO_NORM_CALL (0x0) /* normal call */ #define PRIO_EMERG_CALL (0x1) /* emergency call */ /* * Value constants for VAL_clir_sup */ #define CLR_SUP (0x0) /* CLIR suppressed */ #define CLR_SUP_NOT (0x1) /* CLIR not suppressed */ #define CLR_NOT_PRES (0xff) /* CLIR not present */ /* * Value constants for VAL_sig */ #define SIG_DIAL_TONE_ON (0x0) /* dial tone on */ #define SIG_RING_BACK_TONE_ON (0x1) /* ring back tone on */ #define SIG_INT_TONE_ON (0x2) /* intercept tone on */ #define SIG_NET_CONG_TONE_ON (0x3) /* network congestion tone on */ #define SIG_BUSY_TONE_ON (0x4) /* busy tone on */ #define SIG_CONF_TONE_ON (0x5) /* confirm tone on */ #define SIG_ANS_TONE_ON (0x6) /* answer tone on */ #define SIG_CALL_WAIT_TONE_ON (0x7) /* call waiting tone on */ #define SIG_OFF_HOOK_WARN_TONE_ON (0x8) /* off-hook warning tone on */ #define SIG_TONES_OFF (0x3f) /* tones off */ #define SIG_ALERT_OFF (0x4f) /* alerting off */ #define SIG_NOT_PRES (0xff) /* not present */ /* * Value constants for VAL_congest_lev */ #define CL_RECEIVER_READY (0x0) /* receiver ready */ #define CL_RECEIVER_NOT_READY (0xf) /* receiver not ready */ #define CL_NOT_PRES (0xff) /* not present */ /* * Value constants for VAL_ss_version */ #define SS_VERSION_2 (0x0) /* phase 2 service, ellipsis notation and phase 2 error handling */ #define SS_VERSION_3 (0x1) /* SS-Protocol version 3 and phase 2 error handling */ #define SS_VER_NOT_PRES (0xff) /* not present */ /* * Value constants for VAL_ri */ #define RI_CIRCULAR (0x1) /* circular */ #define RI_SEQUENTIAL (0x3) /* sequential */ #define RI_NOT_PRES (0xff) /* not present */ /* * Value constants for VAL_parity */ #define PARITY_ODD (0x0) /* odd parity */ #define PARITY_EVEN (0x2) /* even parity */ #define PARITY_NONE (0x3) /* no parity */ #define PARITY_FORCED_TO_0 (0x4) /* parity forced to zero */ #define PARITY_FORCED_TO_1 (0x5) /* parity forced to one */ /* * Value constants for VAL_bearer_serv */ #define BEARER_SERV_SYNC (0x0) /* synchronous */ #define BEARER_SERV_ASYNC (0x1) /* asynchronous */ #define BEARER_SERV_PAD_ACCESS (0x2) /* PAD access (async) */ #define BEARER_SERV_PACKET_ACCESS (0x3) /* packet access (sync) */ #define BEARER_SERV_FAX (0x4) /* fax */ #define BEARER_SERV_SPEECH (0x5) /* Speech */ #define BEARER_SERV_AUX_SPEECH (0x6) /* Auxiliary Speech */ #define BEARER_SERV_SPEECH_CTM (0x7) /* Speech with CTM (TTY) support */ #define BEARER_SERV_AUX_SPEECH_CTM (0x8) /* Auxiliary Speech CTM (TTY) support */ #define BEARER_SERV_NOT_PRES (0xff) /* not present */ /* * Value constants for VAL_modem_type */ #define MT_NONE (0x0) /* modem type none */ #define MT_V21 (0x1) /* modem type V.21 */ #define MT_V22 (0x2) /* modem type V.22 */ #define MT_V22_BIS (0x3) /* modem type V.22bis */ #define MT_V23 (0x4) /* modem type V.23 */ #define MT_V26_TER (0x5) /* modem type V.26ter */ #define MT_V32 (0x6) /* modem type V.32 */ #define MT_UNDEF (0x7) /* modem type for undefined interface */ #define MT_AUTOBAUD (0x8) /* modem type autobauding type 1 */ #define MT_V32_BIS (0x9) /* modem type V.32bis */ #define MT_V34 (0xa) /* modem type V.34 */ /* * Value constants for VAL_rate */ #define UR_0_3_KBIT (0x1) /* rate : 0.3 kbit/s Recommendation X.1 and V.110 */ #define UR_1_2_KBIT (0x2) /* rate : 1.2 kbit/s Recommendation X.1 and V.110 */ #define UR_2_4_KBIT (0x3) /* rate : 2.4 kbit/s Recommendation X.1 and V.110 */ #define UR_4_8_KBIT (0x4) /* rate : 4.8 kbit/s Recommendation X.1 and V.110 */ #define UR_9_6_KBIT (0x5) /* rate : 9.6 kbit/s Recommendation X.1 and V.110 */ #define UR_12_0_KBIT_TRANS (0x6) /* rate : 12.0 kbit/s transparent */ #define UR_1_2_KBIT_V23 (0x7) /* rate : 1.2 kbit/s/75 bit/s Recommendation V.23, X.1,V.110. */ #define UR_14_4_KBIT (0x8) /* rate : 14.4 kbit/s */ #define UR_NOT_PRES (0xff) /* not present */ /* * Value constants for VAL_flow_control */ #define INBAND_FLOW_CONTROL (0x8) /* inband flow control (ISO 6429) */ #define NO_FLOW_CONTROL (0xc) /* no flow control (COPnoFLCT) */ #define OUTBAND_FLOW_CONTROL (0xff) /* outband flow control */ /* * Value constants for VAL_conn_elem */ #define CONN_ELEM_TRANS (0x0) /* transparent */ #define CONN_ELEM_NON_TRANS (0x1) /* non transparent (RLP) */ #define CONN_ELEM_TRANS_PREF (0x2) /* both, transparent preferred */ #define CONN_ELEM_NON_TRANS_PREF (0x3) /* both, non transparent (RLP) preferred */ #define CONN_ELEM_NOT_PRES (0xff) /* not present */ /* * Value constants for VAL_stop_bits */ #define STOP_1_BIT (0x0) /* one stop bit */ #define STOP_2_BIT (0x1) /* two stop bits */ /* * Value constants for VAL_data_bits */ #define DATA_7_BIT (0x0) /* seven data bits */ #define DATA_8_BIT (0x1) /* eight data bits */ /* * Value constants for VAL_diagnostic */ #define DIAG_MOC_BAR_CUG (0x81) /* Outgoing calls barred within CUG */ #define DIAG_NO_CUG_SELECTED (0x82) /* No CUG selected */ #define DIAG_UNKNOWN_CUG_INDEX (0x83) /* Unknown CUG index */ #define DIAG_INCOMPAT_CUG_INDEX (0x84) /* CUG index incompatible with requested basic service */ #define DIAG_CUG_FAIL_UNSPEC (0x85) /* CUG call Failure unspecified */ #define DIAG_CLIR_NOT_SUBSCRIBED (0x86) /* CLIR not subscribed */ #define DIAG_CCBS_POSSIBLE (0x87) /* CCBS possible */ #define DIAG_CCBS_NOT_POSSIBLE (0x88) /* CCBS not possible */ /* * Value constants for VAL_ss_diag */ #define SS_DIAG_MOC_BAR_CUG (0x1) /* Outgoing calls barred within CUG */ #define SS_DIAG_NO_CUG_SELECTED (0x2) /* No CUG selected */ #define SS_DIAG_UNKNOWN_CUG_INDEX (0x3) /* Unknown CUG index */ #define SS_DIAG_INCOMPAT_CUG_INDEX (0x4) /* CUG index incompatible with requested basic service */ #define SS_DIAG_CUG_FAIL_UNSPEC (0x5) /* CUG call Failure unspecified */ #define SS_DIAG_CLIR_NOT_SUBSCRIBED (0x6) /* CLIR not subscribed */ #define SS_DIAG_CCBS_POSSIBLE (0x7) /* CCBS possible */ #define SS_DIAG_CCBS_NOT_POSSIBLE (0x8) /* CCBS not possible */ #define SS_DIAG_NOT_PROVIDED (0xff) /* Not Provided */ /* * Value constants for VAL_sns_mode */ #define SNS_MODE_VOICE (0x0) /* voice calls */ #define SNS_MODE_VAF_VOICE (0x1) /* voice alternating FAX, voice first */ #define SNS_MODE_FAX (0x2) /* FAX calls */ #define SNS_MODE_VAD_VOICE (0x3) /* voice alternating data, voice first */ #define SNS_MODE_DATA (0x4) /* data calls */ #define SNS_MODE_VAF_FAX (0x5) /* voice alternating FAX, FAX first */ #define SNS_MODE_VAD_DATA (0x6) /* voice alternating data, data first */ #define SNS_MODE_VFD (0x7) /* voice followed by data */ /* * Value constants for VAL_dtmf_mod */ #define DTMF_MOD_AUTO (0x0) /* automatic mode with fixed duration */ #define DTMF_MOD_MAN_START (0x1) /* manual mode start sending DTMF digit */ #define DTMF_MOD_MAN_STOP (0x2) /* manual mode stop sending DTMF digit */ /* * Value constants for VAL_bc_mod */ #define BC_MOD_CODE (0x0) /* code bearer capabilities */ #define BC_MOD_DECODE (0x1) /* decode bearer capabilities */ /* * Value constants for VAL_rcl_type */ #define RCL_CCBS (0x0) /* CCBS */ #define RCL_CCBS_1 (0x1) /* treated as CCBS */ #define RCL_CCBS_2 (0x2) /* treated as CCBS */ #define RCL_CCBS_3 (0x3) /* treated as CCBS */ #define RCL_CCBS_4 (0x4) /* treated as CCBS */ #define RCL_CCBS_5 (0x5) /* treated as CCBS */ #define RCL_CCBS_6 (0x6) /* treated as CCBS */ /* * Value constants for VAL_synccs */ #define SYNCCS_MPTY_EVENT (0x0) /* Multi party event */ #define SYNCCS_NOT_PRESENT (0xffff) /* Synchronization cause not present */ /* * Value constants for VAL_mpty_event */ #define MPTY_BUILD_SENT (0x0) /* BuildMPTY Invoke sent */ #define MPTY_BUILD_FAIL (0x1) /* BuildMPTY Invoke failed */ #define MPTY_BUILD_SUCCESS (0x2) /* BuildMPTY Invoke ok */ #define MPTY_SPLIT_SENT (0x3) /* SplitMPTY Invoke sent */ #define MPTY_SPLIT_FAIL (0x4) /* SplitMPTY Invoke failed */ #define MPTY_SPLIT_SUCCESS (0x5) /* SplitMPTY Invoke Return Result ok */ #define MPTY_HOLD_SENT (0x6) /* HoldMPTY Invoke sent */ #define MPTY_HOLD_FAIL (0x7) /* HoldMPTY Invoke failed */ #define MPTY_HOLD_SUCCESS (0x8) /* HoldMPTY Invoke ok */ #define MPTY_RETRIEVE_SENT (0x9) /* RetrieveMPTY Invoke */ #define MPTY_RETRIEVE_FAIL (0xa) /* RetrieveMPTY Invoke failed */ #define MPTY_RETRIEVE_SUCCESS (0xb) /* RetrieveMPTY Invoke Return Result ok */ #define MPTY_NOT_PRESENT (0xff) /* Parameter not present */ /* * Value constants for VAL_ctm_ena */ #define CTM_DISABLED (0x0) /* CTM not supported */ #define CTM_ENABLED (0x1) /* CTM supported */ /* * Value constants for VAL_ton */ #define TON_UNKNOWN (0x0) /* unknown */ #define TON_INT_NUMB (0x1) /* international number */ #define TON_NAT_NUMB (0x2) /* national number */ #define TON_NET_SPEC_NUMB (0x3) /* network specific number */ #define TON_DED_ACC_SC (0x4) /* dedicated access, short code */ #define TON_NOT_PRES (0xff) /* type of number not present */ /* * Value constants for VAL_npi */ #define NPI_UNKNOW (0x0) /* unknown */ #define NPI_ISDN_TEL_NUMB_PLAN (0x1) /* ISDN/telephony numbering plan */ #define NPI_DATA_NUMB_PLAN (0x3) /* data numbering plan */ #define NPI_TELEX_NUMB_PLAN (0x4) /* telex numbering plan */ #define NPI_NAT_NUMB_PLAN (0x8) /* national numbering plan */ #define NPI_PRIV_NUMB_PLAN (0x9) /* private numbering plan */ #define NPI_NOT_PRES (0xff) /* numbering plan identification not present */ /* * Value constants for VAL_present */ #define PRES_PRES_ALLOW (0x0) /* presentation allowed */ #define PRES_PRES_REST (0x1) /* presentation restricted */ #define PRES_NUMB_NOT_AVAIL (0x2) /* number not available due to interworking */ #define PRES_NOT_PRES (0xff) /* not present */ /* * Value constants for VAL_screen */ #define SCREEN_USER_PROV_NOT_SCREEN (0x0) /* user provided, not screened */ #define SCREEN_USER_PROV_VER_PASS (0x1) /* user provided, verified and passed */ #define SCREEN_USER_PROV_VER_FAIL (0x2) /* user provided, verified and failed */ #define SCREEN_NET_PROV (0x3) /* network provided */ #define SCREEN_IND_NOT_PRES (0xff) /* not present */ /* * user defined constants */ #define FACILITY_LEN (0xfb) #define USER_LEN (0x83) #define MAX_CC_CALLING_NUMBER (0x16) #define MAX_CC_REDIR_NUMBER (0x20) #define MAX_CC_CALLED_NUMBER (0x50) #define SUB_LENGTH (0x14) #define MAX_BC_LEN (0xa) #define CC_ORIGINATING_ENTITY (0x5) #define ACI_ORIGINATING_ENTITY (0x1) #define MAX_CC_CAUSE_LENGTH (0x1e) #include "CDG_LEAVE.h" #endif