FreeCalypso > hg > fc-magnetite

view src/aci2/aci/aci_bat_mm.c @ 662:8cd8fd15a095

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
SIM speed enhancement re-enabled and made configurable TI's original code supported SIM speed enhancement, but Openmoko had it disabled, and OM's disabling of speed enhancement somehow caused certain SIM cards to start working which didn't work before (OM's bug #666). Because our FC community is much smaller in year 2020 than OM's community was in their day, we are not able to find one of those #666-affected SIMs, thus the real issue they had encountered remains elusive. Thus our solution is to re-enable SIM speed enhancement and simply wait for if and when someone runs into a #666-affected SIM once again. We provide a SIM_allow_speed_enhancement global variable that allows SIM speed enhancement to be enabled or disabled per session, and an /etc/SIM_spenh file in FFS that allows it to enabled or disabled on a non-volatile basis. SIM speed enhancement is now enabled by default.
author Mychaela Falconia <falcon@freecalypso.org>
date Sun, 24 May 2020 05:02:28 +0000
parents 93999a60b835
children
line wrap: on
line source

/* 
+----------------------------------------------------------------------------- 
|  Project :  GSM-F&D (8411)
|  Modul   :  ACI_BAT
+-----------------------------------------------------------------------------
|  Copyright 2002 Texas Instruments Berlin, AG
|                 All rights reserved. 
|
|                 This file is confidential and a trade secret of Texas 
|                 Instruments Berlin, AG 
|                 The receipt of or possession of this file does not convey 
|                 any rights to reproduce or disclose its contents or to 
|                 manufacture, use, or sell anything it may describe, in 
|                 whole, or in part, without the specific written consent of 
|                 Texas Instruments Berlin, AG. 
+----------------------------------------------------------------------------- 
|  Purpose :  This BAT wrapper modul is ...
| 
+----------------------------------------------------------------------------- 
*/ 

#include "aci_all.h"     /* includes prim.h, which includes p_bat.h */ 
#include "aci_cmh.h"     /* prototypes of sAT_,qAT_,tAT_    */ 
#include "aci_bat_cmh.h" /* prototypes of sBAT_,qBAT_,tBAT_ */ 

#ifdef FF_ATI_BAT
#include "typedefs.h"
#include "gdd.h"
#include "bat.h"
#include "aci_bat.h"
#endif /* FF_ATI_BAT */

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
| STATE   : code                      ROUTINE : sBAT_PlusCOPS        |
+--------------------------------------------------------------------+

  PURPOSE : 
*/
#undef  min
#define min(a,b) ((a) < (b) ? (a) : (b)) /* from gpf\inc\vcms */

GLOBAL T_ACI_BAT_RSLT sBAT_PlusCOPS(T_ACI_DTI_PRC_PSI *src_infos_psi,
                                    T_BAT_cmd_send    *cmd)
{
  T_ACI_BAT_RSLT ret;

  U8   c_oper = cmd->params.ptr_set_plus_cops->c_oper;
  CHAR op[MAX_ALPHA_OPER_LEN] = {0};
  
  TRACE_FUNCTION ("sBAT_PlusCOPS()");

  c_oper = min(c_oper, MAX_ALPHA_OPER_LEN);

  if (cmd->params.ptr_set_plus_cops->v_oper EQ TRUE)
    memcpy(op, cmd->params.ptr_set_plus_cops->oper, c_oper);
  
  ret = sAT_PlusCOPS (src_infos_psi->srcId,
                      cmd->params.ptr_set_plus_cops->mode,
                      cmd->params.ptr_set_plus_cops->format, op);
  return(ret);
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
| STATE   : code                      ROUTINE : qBAT_PlusCOPS        |
+--------------------------------------------------------------------+

  PURPOSE : 
*/
GLOBAL T_ACI_BAT_RSLT qBAT_PlusCOPS(T_ACI_DTI_PRC_PSI *src_infos_psi,
                                    T_BAT_cmd_send    *cmd)
{
  T_ACI_BAT_RSLT ret;

  CHAR op[MAX_ALPHA_OPER_LEN] = {0};

  T_ACI_COPS_MOD  mode = COPS_MOD_NotPresent;
  T_ACI_COPS_FRMT format = COPS_FRMT_NotPresent;
  T_BAT_cmd_response resp;
  T_BAT_res_que_plus_cops cops;

  TRACE_FUNCTION ("qBAT_PlusCOPS()");

  resp.ctrl_response = BAT_RES_QUE_PLUS_COPS;
  resp.response.ptr_que_plus_cops = &cops;

  ret = qAT_PlusCOPS(src_infos_psi->srcId, &mode, &format, op);

  cops.mode    = mode;
  cops.format  = format;
  cops.c_oper  = strlen(op);
  cops.v_oper  = cops.c_oper ? TRUE : FALSE;

  if (cops.v_oper)
  {
    memcpy(cops.oper, op, cops.c_oper);
  }
  aci_bat_send(src_infos_psi, &resp);
  return(ret);
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
| STATE   : code                      ROUTINE : tBAT_PlusCOPS        |
+--------------------------------------------------------------------+

  PURPOSE : 
*/
GLOBAL T_ACI_BAT_RSLT tBAT_PlusCOPS(T_ACI_DTI_PRC_PSI *src_infos_psi,
                                    T_BAT_cmd_send    *cmd)
{
  T_ACI_BAT_RSLT ret;
  T_ACI_COPS_LST operLst;
  T_BAT_cmd_response resp = {0};
  T_BAT_res_tst_plus_cops *pTPC = resp.response.ptr_tst_plus_cops;

  SHORT startIdx = 0, lastIdx = 0;
  BOOL END_OF_LIST = FALSE;

  TRACE_FUNCTION ("tBAT_PlusCOPS()");

  resp.ctrl_response = BAT_RES_TST_PERCENT_COPS;
  
  do
  {
    int i;

    startIdx += lastIdx;
    ret = tAT_PlusCOPS(src_infos_psi->srcId, startIdx, &lastIdx, &operLst[0]);
    if (ret NEQ ACI_BAT_CMPL)
      return (ret);
    
    for (i = 0; i < lastIdx; i++)
    {
      if ((operLst[i].status EQ COPS_STAT_NotPresent) AND (*operLst[i].numOper EQ 0))
      {
        END_OF_LIST = TRUE;
        break;
      }
      /* Fill BAT resp structs */
      pTPC->status = operLst[i].status;
      pTPC->c_short_oper = strlen(operLst[i].shortOper);
      pTPC->c_long_oper = strlen(operLst[i].longOper);
      pTPC->c_num_oper = strlen(operLst[i].numOper);

      /* Check if there is long operator name, set valid flag and store it. */
      if(pTPC->c_long_oper)
      {
        pTPC->v_long_oper = TRUE;
        strncpy((CHAR*)pTPC->long_oper, operLst[i].longOper, pTPC->c_long_oper);
      }

      /* Check if there is short operator name, set valid flag and store it. */
      if(pTPC->c_short_oper)
      {
        pTPC->v_short_oper = TRUE;
        strncpy((CHAR*)pTPC->short_oper, operLst[i].shortOper, pTPC->c_short_oper);
      }

      /* Check if there is num operator name, set valid flag and store it. */
      if(pTPC->c_num_oper)
      {
        pTPC->v_num_oper = TRUE;
        strncpy((CHAR*)pTPC->num_oper, operLst[i].numOper, pTPC->c_num_oper);
      }

      aci_bat_send(src_infos_psi, &resp);
    }
    return (ACI_BAT_CMPL);
  } while(!END_OF_LIST);
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
| STATE   : code                      ROUTINE : sBAT_PercentCOPS     |
+--------------------------------------------------------------------+

  PURPOSE : 
*/
GLOBAL T_ACI_BAT_RSLT sBAT_PercentCOPS(T_ACI_DTI_PRC_PSI *src_infos_psi,
                                       T_BAT_cmd_send    *cmd)
{
  T_ACI_BAT_RSLT ret;

  U8   c_oper = cmd->params.ptr_set_percent_cops->c_oper;
  CHAR op[MAX_ALPHA_OPER_LEN] = {0};

  TRACE_FUNCTION ("sBAT_PercentCOPS()");

  c_oper = min(c_oper, MAX_ALPHA_OPER_LEN);

  if (cmd->params.ptr_set_percent_cops->v_oper EQ TRUE)
    memcpy(op, cmd->params.ptr_set_percent_cops->oper, c_oper);

  ret = sAT_PercentCOPS (src_infos_psi->srcId,
                         cmd->params.ptr_set_percent_cops->mode,
                         cmd->params.ptr_set_percent_cops->format, op);
  return(ret);
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
| STATE   : code                      ROUTINE : tBAT_PercentCOPS     |
+--------------------------------------------------------------------+

  PURPOSE : 
*/
GLOBAL T_ACI_BAT_RSLT tBAT_PercentCOPS(T_ACI_DTI_PRC_PSI *src_infos_psi,
                                       T_BAT_cmd_send    *cmd)
{
  T_ACI_BAT_RSLT ret;
  T_ACI_COPS_LST operLst;
  T_BAT_cmd_response resp = {0};
  T_BAT_res_tst_percent_cops *pTPC = resp.response.ptr_tst_percent_cops;

  SHORT startIdx = 0, lastIdx = 0;
  BOOL END_OF_LIST = FALSE;

  TRACE_FUNCTION ("tBAT_PercentCOPS()");

  resp.ctrl_response = BAT_RES_TST_PERCENT_COPS;
  
  do
  {
    int i;

    startIdx += lastIdx;
    ret = tAT_PlusCOPS(src_infos_psi->srcId, startIdx, &lastIdx, &operLst[0]);
    if (ret NEQ ACI_BAT_CMPL)
      return (ret);
    
    for (i = 0; i < lastIdx; i++)
    {
      if ((operLst[i].status EQ COPS_STAT_NotPresent) AND (*operLst[i].numOper EQ 0))
      {
        END_OF_LIST = TRUE;
        break;
      }
      /* Fill BAT resp structs */
      pTPC->status = operLst[i].status;
      pTPC->c_short_oper = strlen(operLst[i].shortOper);
      pTPC->c_long_oper = strlen(operLst[i].longOper);
      pTPC->c_num_oper = strlen(operLst[i].numOper);

      /* Check if there is long operator name, set valid flag and store it. */
      if(pTPC->c_long_oper)
      {
        pTPC->v_long_oper = TRUE;
        strncpy((CHAR*)pTPC->long_oper, operLst[i].longOper, pTPC->c_long_oper);
      }

      /* Check if there is short operator name, set valid flag and store it. */
      if(pTPC->c_short_oper)
      {
        pTPC->v_short_oper = TRUE;
        strncpy((CHAR*)pTPC->short_oper, operLst[i].shortOper, pTPC->c_short_oper);
      }

      /* Check if there is num operator name, set valid flag and store it. */
      if(pTPC->c_num_oper)
      {
        pTPC->v_num_oper = TRUE;
        strncpy((CHAR*)pTPC->num_oper, operLst[i].numOper, pTPC->c_num_oper);
      }

      aci_bat_send(src_infos_psi, &resp);
    }
    return (ACI_BAT_CMPL);
  } while(!END_OF_LIST);
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
| STATE   : code                      ROUTINE : qBAT_PercentCOPS     |
+--------------------------------------------------------------------+

  PURPOSE : 
*/
GLOBAL T_ACI_BAT_RSLT qBAT_PercentCOPS(T_ACI_DTI_PRC_PSI *src_infos_psi,
                                       T_BAT_cmd_send    *cmd)
{
  T_ACI_BAT_RSLT ret;

  CHAR op[MAX_ALPHA_OPER_LEN] = {0};

  T_ACI_COPS_MOD  mode = COPS_MOD_NotPresent;
  T_ACI_COPS_FRMT format = COPS_FRMT_NotPresent;
  T_ACI_COPS_SVST svrStatus = COPS_SVST_NotPresent;
  T_BAT_cmd_response resp;
  T_BAT_res_que_percent_cops cops;

  TRACE_FUNCTION ("qBAT_PercentCOPS()");

  resp.ctrl_response = BAT_RES_QUE_PERCENT_COPS;
  resp.response.ptr_que_percent_cops = &cops;

  ret = qAT_PercentCOPS(src_infos_psi->srcId, &mode, &format, &svrStatus, op);

  cops.mode    = mode;
  cops.format  = format;
  cops.service = svrStatus;
  cops.c_oper  = strlen(op);
  cops.v_oper  = cops.c_oper ? TRUE : FALSE;
  
  if (cops.v_oper)
  {
    memcpy(cops.oper, op, cops.c_oper);
  }
  aci_bat_send(src_infos_psi, &resp);
  return(ret);
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
| STATE   : code                      ROUTINE : qBAT_PercentCREG     |
+--------------------------------------------------------------------+

  PURPOSE : 
*/
GLOBAL T_ACI_BAT_RSLT qBAT_PercentCREG(T_ACI_DTI_PRC_PSI *src_infos_psi,
                                       T_BAT_cmd_send    *cmd)
{
  T_ACI_BAT_RSLT ret;
  T_BAT_cmd_response resp;
  T_BAT_res_que_percent_creg creg;

  TRACE_FUNCTION ("qBAT_PercentCREG()");
  
  resp.ctrl_response = BAT_RES_QUE_PERCENT_CREG;
  resp.response.ptr_que_percent_creg = &creg;

  ret = qAT_PercentCREG(src_infos_psi->srcId, 
                        (T_ACI_CREG_STAT*)&creg.stat,
                        (USHORT*)&creg.lac,
                        (USHORT*)&creg.ci,
                        (T_ACI_P_CREG_GPRS_IND*)&creg.gprs_ind);

  aci_bat_send(src_infos_psi, &resp);
  return(ret);
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
| STATE   : code                      ROUTINE : sBAT_PlusWS46        |
+--------------------------------------------------------------------+

  PURPOSE : 
*/
GLOBAL T_ACI_BAT_RSLT sBAT_PlusWS46(T_ACI_DTI_PRC_PSI *src_infos_psi,
                                    T_BAT_cmd_send    *cmd)
{
  T_ACI_BAT_RSLT ret;
  T_BAT_plus_ws46_n mode = cmd->params.ptr_set_plus_ws46->n;

  TRACE_FUNCTION ("sBAT_PlusWS46()");

  ret = sAT_PlusWS46(src_infos_psi->srcId, mode);
  return(ret);
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
| STATE   : code                      ROUTINE : qBAT_PlusWS46        |
+--------------------------------------------------------------------+

  PURPOSE : 
*/
GLOBAL T_ACI_BAT_RSLT qBAT_PlusWS46(T_ACI_DTI_PRC_PSI *src_infos_psi,
                                    T_BAT_cmd_send    *cmd)
{
  T_ACI_BAT_RSLT ret;
  T_BAT_cmd_response resp;
  T_BAT_res_que_plus_ws46 ws46;

  TRACE_FUNCTION ("qBAT_PlusWS46()");
  
  resp.ctrl_response = BAT_RES_QUE_PLUS_WS46;
  resp.response.ptr_que_plus_ws46 = &ws46;

  ret = qAT_PlusWS46(src_infos_psi->srcId, (T_ACI_WS46_MOD *)&ws46.n);

  aci_bat_send(src_infos_psi, &resp);
  return(ret);
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
| STATE   : code                      ROUTINE : sBAT_PercentCHPL     |
+--------------------------------------------------------------------+

  PURPOSE : 
*/
GLOBAL T_ACI_BAT_RSLT sBAT_PercentCHPL(T_ACI_DTI_PRC_PSI *src_infos_psi,
                                       T_BAT_cmd_send    *cmd)
{
  T_ACI_BAT_RSLT ret;
  T_ACI_OPER_NTRY oper;
  UBYTE len;
    
  TRACE_FUNCTION ("sBAT_PercentCHPL()");

  /*
  *   Call the corresponding ACI function. T_ACI_BAT_RSLT is
  *   assumed to be equivalent to T_ACI_RESULT.
  */
  ret=(T_ACI_BAT_RSLT)sAT_PercentCHPL(src_infos_psi->srcId,&oper);

  /*
  *   If the command completes, we must send a response.
  */
  if (ret==ACI_BAT_CMPL)
  {
    T_BAT_cmd_response resp;
    T_BAT_res_set_percent_chpl chpl_data;

    resp.ctrl_response=BAT_RES_SET_PERCENT_CHPL;
    resp.response.ptr_set_percent_chpl=&chpl_data;

    chpl_data.type=BAT_P_CHPL_TYPE_FROM_IMS;

    switch (cmd->params.ptr_set_percent_chpl->oprfrmt)
    {
      case BAT_P_CHPL_OPRFRMT_LONG:
        len=strlen(oper.longName);

        if (len<=BAT_MAX_CHPL_OPER_LEN)
        {
          memcpy(chpl_data.oper,oper.longName,len);
          chpl_data.c_oper=(U8)len;
        }
        else
        {
          return(ACI_BAT_FAIL);
        }
        break;

      case BAT_P_CHPL_OPRFRMT_SHORT:
        len=strlen(oper.shrtName);

        if (len<=BAT_MAX_CHPL_OPER_LEN)
        {
          memcpy(chpl_data.oper,oper.shrtName,len);
          chpl_data.c_oper=(U8)len;
        }
        else
        {
          return(ACI_BAT_FAIL);
        }
        break;
 
      case BAT_P_CHPL_OPRFRMT_NUMERIC:
        /*
        *   Representation of the numeric format as in the ATI.
        */
        if ((oper.mnc & 0x00F)==0xF)
          sprintf((char *)chpl_data.oper, "%03x,%02x",oper.mcc, oper.mnc >> 4);
        else
          sprintf((char *)chpl_data.oper, "%03x,%03x",oper.mcc, oper.mnc);

        chpl_data.c_oper=(U8)strlen((char *)chpl_data.oper);
        break;

      default:
        return(ACI_BAT_FAIL);
        break;
    }

    aci_bat_send(src_infos_psi,&resp);
  }

  return(ret);
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
| STATE   : code                      ROUTINE : sBAT_PlusCTZU        |
+--------------------------------------------------------------------+

  PURPOSE : 
*/
GLOBAL T_ACI_BAT_RSLT sBAT_PlusCTZU(T_ACI_DTI_PRC_PSI *src_infos_psi,
                                    T_BAT_cmd_send    *cmd)
{
  T_ACI_BAT_RSLT ret;

  TRACE_FUNCTION ("sBAT_PlusCTZU()");

  ret = sAT_PlusCTZU (src_infos_psi->srcId, cmd->params.ptr_set_plus_ctzu->onoff);
  return(ret);
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
| STATE   : code                      ROUTINE : qBAT_PlusCTZU        |
+--------------------------------------------------------------------+

  PURPOSE : 
*/
GLOBAL T_ACI_BAT_RSLT qBAT_PlusCTZU(T_ACI_DTI_PRC_PSI *src_infos_psi,
                                    T_BAT_cmd_send    *cmd)
{
  T_ACI_BAT_RSLT ret;
  
  T_BAT_cmd_response resp;
  T_BAT_res_que_plus_ctzu ctzu;
  
  TRACE_FUNCTION ("qBAT_PlusCTZU()");
  
  resp.ctrl_response = BAT_RES_QUE_PLUS_CTZU;
  resp.response.ptr_que_plus_ctzu = &ctzu;
  ret = qAT_PlusCTZU(src_infos_psi->srcId, (T_ACI_CTZU_MODE*)&ctzu.onoff);

  aci_bat_send(src_infos_psi, &resp);
  return(ret);
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
| STATE   : code                      ROUTINE : sBAT_PercentCWUP     |
+--------------------------------------------------------------------+

  PURPOSE : 
*/
GLOBAL T_ACI_BAT_RSLT sBAT_PercentCWUP(T_ACI_DTI_PRC_PSI *src_infos_psi,
                                       T_BAT_cmd_send    *cmd)
{
  T_ACI_BAT_RSLT ret = ACI_BAT_FAIL;

  TRACE_FUNCTION ("sBAT_PercentCWUP()");

  ret = sAT_PercentCWUP (src_infos_psi->srcId, cmd->params.ptr_set_percent_cwup->type);
  return(ret);
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
| STATE   : code                      ROUTINE : sBAT_PercentCTZV     |
+--------------------------------------------------------------------+

  PURPOSE : %CTZV command mode (time and date report)
*/
GLOBAL T_ACI_BAT_RSLT sBAT_PercentCTZV (T_ACI_DTI_PRC_PSI *src_infos_psi,
                                        T_BAT_cmd_send    *cmd)
{
  T_ACI_BAT_RSLT ret;

  TRACE_FUNCTION ("sBAT_PercentCTZV()");

  ret = sAT_PercentCTZV (src_infos_psi->srcId, 
                         (T_ACI_PCTZV_MODE)cmd->params.ptr_set_percent_ctzv->mode);
  return(ret);
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
| STATE   : code                      ROUTINE : sBAT_PlusCIND        |
+--------------------------------------------------------------------+

  PURPOSE : 
*/
GLOBAL T_ACI_BAT_RSLT sBAT_PlusCIND(T_ACI_DTI_PRC_PSI *src_infos_psi,
                                    T_BAT_cmd_send    *cmd)
{
  T_ACI_BAT_RSLT ret;

  TRACE_FUNCTION ("sBAT_PlusCIND()");
  
  ret = sAT_PlusCIND( src_infos_psi->srcId,
                      cmd->params.ptr_set_plus_cind->signal_ctrl,
                      cmd->params.ptr_set_plus_cind->smsfull_ctrl);
  return(ret);
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
| STATE   : code                      ROUTINE : qBAT_PlusCIND        |
+--------------------------------------------------------------------+

  PURPOSE : 
*/
GLOBAL T_ACI_BAT_RSLT qBAT_PlusCIND(T_ACI_DTI_PRC_PSI *src_infos_psi,
                                    T_BAT_cmd_send    *cmd)
{
  T_ACI_BAT_RSLT ret;

  T_BAT_cmd_response resp;
  T_BAT_res_que_plus_cind cind;

  TRACE_FUNCTION ("qBAT_PlusCIND()");

  resp.ctrl_response = BAT_RES_QUE_PLUS_CIND;
  resp.response.ptr_que_plus_cind = &cind;

  ret = qAT_PlusCIND(src_infos_psi->srcId,
               (T_ACI_CIND_SIGNAL_TYPE*)&cind.signal, 
               (T_ACI_CIND_SMSFULL_TYPE*)&cind.smsfull); 

  aci_bat_send(src_infos_psi, &resp);
  return(ret);
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
| STATE   : code                      ROUTINE : sBAT_PlusCMER        |
+--------------------------------------------------------------------+

  PURPOSE : 
*/
GLOBAL T_ACI_BAT_RSLT sBAT_PlusCMER(T_ACI_DTI_PRC_PSI *src_infos_psi,
                                    T_BAT_cmd_send    *cmd)
{
  T_ACI_BAT_RSLT ret;

  T_ACI_CMER_MODE_TYPE sCmerModeSettings = CMER_MODE_INVALID;
  T_ACI_CMER_IND_TYPE  sCmerIndicationSettings = CMER_INDICATOR_INVALID;
  T_ACI_CMER_BFR_TYPE  sCmerBfrSettings = CMER_BFR_INVALID;

  TRACE_FUNCTION ("sBAT_PlusCMER()");
  
  switch (cmd->params.ptr_set_plus_cmer->ind_option)
  {
  case BAT_CMER_IND_OPTION_LOWER:
    ret = sAT_PlusCMER(src_infos_psi->srcId,
                       sCmerModeSettings,
                       sCmerIndicationSettings,
                       sCmerBfrSettings);
    break;

  case BAT_CMER_IND_OPTION_GREATER_EQUAL:
    ret = sAT_PlusCMER(src_infos_psi->srcId,
                       sCmerModeSettings,
                       sCmerIndicationSettings,
                       sCmerBfrSettings);
    break;

  case BAT_CMER_IND_OPTION_NOT_PRESENT:
  default:
    return ACI_BAT_FAIL;
    break;
  }
  return(ret);
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
| STATE   : code                      ROUTINE : qBAT_PlusCMER        |
+--------------------------------------------------------------------+

  PURPOSE : 
*/
GLOBAL T_ACI_BAT_RSLT qBAT_PlusCMER(T_ACI_DTI_PRC_PSI *src_infos_psi,
                                    T_BAT_cmd_send    *cmd)
{
  T_ACI_BAT_RSLT ret;
  T_BAT_cmd_response resp;
  T_BAT_res_que_plus_cmer cmer;

  T_ACI_CMER_MODE_TYPE sCmerModeSettings;
  T_ACI_CMER_IND_TYPE  sCmerIndicationSettings;
  T_ACI_CMER_BFR_TYPE  sCmerBfrSettings;

  TRACE_FUNCTION ("qBAT_PlusCMER()");

  resp.ctrl_response = BAT_RES_QUE_PLUS_CMER;
  resp.response.ptr_que_plus_cmer = &cmer;

  ret = qAT_PlusCMER(src_infos_psi->srcId,
                     &sCmerModeSettings,
                     &sCmerIndicationSettings,
                     &sCmerBfrSettings);

  switch (cmd->params.ptr_que_plus_cmer->bat_dummy)
  {
  default:
    break;
  }
  aci_bat_send(src_infos_psi, &resp);
  return(ret);
}