FreeCalypso > hg > fc-magnetite
view src/aci2/aci/cmh_t30.h @ 662:8cd8fd15a095
SIM speed enhancement re-enabled and made configurable
TI's original code supported SIM speed enhancement, but Openmoko had it
disabled, and OM's disabling of speed enhancement somehow caused certain
SIM cards to start working which didn't work before (OM's bug #666).
Because our FC community is much smaller in year 2020 than OM's community
was in their day, we are not able to find one of those #666-affected SIMs,
thus the real issue they had encountered remains elusive. Thus our
solution is to re-enable SIM speed enhancement and simply wait for if
and when someone runs into a #666-affected SIM once again. We provide
a SIM_allow_speed_enhancement global variable that allows SIM speed
enhancement to be enabled or disabled per session, and an /etc/SIM_spenh
file in FFS that allows it to enabled or disabled on a non-volatile
basis. SIM speed enhancement is now enabled by default.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Sun, 24 May 2020 05:02:28 +0000 |
parents | 93999a60b835 |
children |
line wrap: on
line source
/* +----------------------------------------------------------------------------- | Project : GSM-PS (6147) | Modul : CMH_T30 +----------------------------------------------------------------------------- | Copyright 2002 Texas Instruments Berlin, AG | All rights reserved. | | This file is confidential and a trade secret of Texas | Instruments Berlin, AG | The receipt of or possession of this file does not convey | any rights to reproduce or disclose its contents or to | manufacture, use, or sell anything it may describe, in | whole, or in part, without the specific written consent of | Texas Instruments Berlin, AG. +----------------------------------------------------------------------------- | Purpose : Definitions for the command handler of T30. +----------------------------------------------------------------------------- */ #ifndef CMH_T30_H #define CMH_T30_H #ifdef FF_FAX /*==== CONSTANTS ==================================================*/ #define PRI_MRK (8) /* procedure interrupt marker */ /*==== TYPES ======================================================*/ typedef enum { NO_VLD_FRT = 0, /* not a valid frame type */ FRT_DIS, /* DIS frame type */ FRT_DTC, /* DTC frame type */ FRT_DCS /* DCS frame type */ } T_T30_FRTP; typedef struct /* negotiated parameters */ { T_ACI_F_VR FCSvr; T_ACI_F_BR FCSbr; T_ACI_F_WD FCSwd; T_ACI_F_LN FCSln; T_ACI_F_DF FCSdf; T_ACI_F_EC FCSec; T_ACI_F_BF FCSbf; T_ACI_F_ST FCSst; T_ACI_F_JP FCSjp; } T_T30_NGT_PRMS; typedef struct entT30Status /* entity status */ { T_ACI_CMD_SRC entOwn; /* entity owner */ T_ACI_AT_CMD curCmd; /* current command processing */ BOOL isTempDisconnected; } T_T30_ENT_STAT; /*==== PROTOTYPES =================================================*/ EXTERN void cmhT30_RTN ( void ); EXTERN void cmhT30_RTP ( void ); EXTERN void cmhT30_HDLCRpt ( void ); EXTERN void cmhT30_ProcIntInst ( void ); EXTERN void cmhT30_ProcInt ( void ); EXTERN void cmhT30_PageReceivedPRI ( void ); EXTERN void cmhT30_ProcEndPRI ( void ); EXTERN void cmhT30_DocReceivedPRI ( void ); EXTERN void cmhT30_NextPage ( void ); EXTERN void cmhT30_NextDoc ( void ); EXTERN void cmhT30_PageReceived ( void ); EXTERN void cmhT30_FTT ( void ); EXTERN void cmhT30_PreambleRcvd ( void ); EXTERN void cmhT30_ProcEnd ( void ); EXTERN void cmhT30_DocReceived ( void ); EXTERN void cmhT30_Disconnected ( void ); EXTERN void cmhT30_Disconnect ( void ); EXTERN void cmhT30_Deactivated ( void ); EXTERN void cmhT30_TransCmpl ( void ); EXTERN void cmhT30_CapRmtSite ( void ); EXTERN void cmhT30_Activated ( void ); EXTERN void cmhT30_Failure ( void ); EXTERN T_ACI_RETURN cmhT30_Activate ( T_ACI_CMD_SRC srcId, T_ACI_AT_CMD cmdId, SHORT cId ); EXTERN T_ACI_RETURN cmhT30_Deactivate ( void ); EXTERN T_ACI_RETURN cmhT30_Modify ( void ); EXTERN T_ACI_RETURN cmhT30_SendCaps ( T_ACI_CMD_SRC srcId, T_T30_FRTP frmTyp ); EXTERN T_ACI_F_BR cmhT30_Chn2BitRate ( void ); EXTERN USHORT cmhT30_SelChnRate ( void ); EXTERN UBYTE cmhT30_SelHlfRate ( void ); EXTERN USHORT cmhT30_SelUsrRate ( void ); EXTERN UBYTE cmhT30_SelBitOrder ( T_ACI_CMD_SRC srcId ); EXTERN BOOL cmhT30_Chk4TCHAdpt ( void ); EXTERN T_ACI_BS_SPEED cmhT30_GetDataRate ( void ); EXTERN T_ACI_F_VR cmhT30_GetResolution( void * p, T_T30_FRTP frmTyp ); EXTERN T_ACI_F_BR cmhT30_GetBitRate ( void * p, T_T30_FRTP frmTyp ); EXTERN T_ACI_F_WD cmhT30_GetPageWidth ( void * p ); EXTERN T_ACI_F_LN cmhT30_GetPageLength( void * p ); EXTERN T_ACI_F_DF cmhT30_GetDataComp ( void * p ); EXTERN T_ACI_F_EC cmhT30_GetErrCorr ( void * p ); EXTERN T_ACI_F_BF cmhT30_GetFileTrnsfr( void * p ); EXTERN T_ACI_F_ST cmhT30_GetScanTime ( void * p ); EXTERN T_ACI_F_JP cmhT30_GetJPEG ( void * p ); EXTERN void cmhT30_RstNgtPrms ( void ); EXTERN void cmhT30_InitFAXPrms ( T_ACI_CMD_SRC srcId ); EXTERN void cmhT30_BuildSndFrm ( T_ACI_CMD_SRC srcId, T_T30_FRTP frmTyp ); /* never called !!? EXTERN void cmhT30_PPMRcvd ( UBYTE ppm ); */ EXTERN void cmhT30_PRIRcvd ( void ); EXTERN void cmhT30_NgtDCEPrms ( T_ACI_CMD_SRC srcId ); EXTERN UBYTE cmhT30_GetPpr ( T_ACI_FPS_PPR ppr ); EXTERN void cmhT30_FITTimeout ( void ); EXTERN void cmhT30_StopFIT ( void ); EXTERN void cmhT30_StartFIT ( void ); /* call-back for DTI Mng */ #ifdef DTI EXTERN BOOL T30_connect_dti_cb(UBYTE dti_id, T_DTI_CONN_STATE result_type); #endif /* DTI */ /*==== EXPORT =====================================================*/ #ifdef CMH_T30F_C GLOBAL T_T30_ENT_STAT t30EntStat; GLOBAL T_T30_NGT_PRMS t30NgtPrms; GLOBAL T_ACI_FHS_STAT FHSstat; GLOBAL BOOL pageSentFlg = TRUE; GLOBAL BOOL DTCSentFlg = FALSE; GLOBAL BOOL PRIRcvdFlg = FALSE; GLOBAL BOOL ppmPendFlg = FALSE; GLOBAL BOOL FITRunFlg = FALSE; #else EXTERN T_T30_ENT_STAT t30EntStat; EXTERN T_T30_NGT_PRMS t30NgtPrms; EXTERN T_ACI_FHS_STAT FHSstat; EXTERN BOOL pageSentFlg; EXTERN BOOL DTCSentFlg; EXTERN BOOL PRIRcvdFlg; EXTERN BOOL ppmPendFlg; EXTERN BOOL FITRunFlg; #endif /* CMH_T30F_C */ #endif /* FF_FAX */ #endif /* CMH_T30_H */ /*==== EOF =======================================================*/