view src/aci2/aci/cmh_t30s.c @ 662:8cd8fd15a095

SIM speed enhancement re-enabled and made configurable TI's original code supported SIM speed enhancement, but Openmoko had it disabled, and OM's disabling of speed enhancement somehow caused certain SIM cards to start working which didn't work before (OM's bug #666). Because our FC community is much smaller in year 2020 than OM's community was in their day, we are not able to find one of those #666-affected SIMs, thus the real issue they had encountered remains elusive. Thus our solution is to re-enable SIM speed enhancement and simply wait for if and when someone runs into a #666-affected SIM once again. We provide a SIM_allow_speed_enhancement global variable that allows SIM speed enhancement to be enabled or disabled per session, and an /etc/SIM_spenh file in FFS that allows it to enabled or disabled on a non-volatile basis. SIM speed enhancement is now enabled by default.
author Mychaela Falconia <falcon@freecalypso.org>
date Sun, 24 May 2020 05:02:28 +0000
parents 93999a60b835
children
line wrap: on
line source

/*
+-----------------------------------------------------------------------------
|  Project :  GSM-PS (6147)
|  Modul   :  CMH_T30S
+-----------------------------------------------------------------------------
|  Copyright 2002 Texas Instruments Berlin, AG
|                 All rights reserved.
|
|                 This file is confidential and a trade secret of Texas
|                 Instruments Berlin, AG
|                 The receipt of or possession of this file does not convey
|                 any rights to reproduce or disclose its contents or to
|                 manufacture, use, or sell anything it may describe, in
|                 whole, or in part, without the specific written consent of
|                 Texas Instruments Berlin, AG.
+-----------------------------------------------------------------------------
|  Purpose :  This module provides the set functions related to the
|             protocol stack adapter for T30.
+-----------------------------------------------------------------------------
*/

#if defined (DTI) || defined (FF_FAX)
 
#ifndef CMH_T30S_C
#define CMH_T30S_C
#endif

#include "aci_all.h"
/*==== INCLUDES ===================================================*/
#include "aci_cmh.h"
#include "ati_cmd.h"
#include "aci_cmd.h"
#include "dti.h"      /* functionality of the dti library */

#include "dti_conn_mng.h"
#include "dti_cntrl_mng.h"

#include "aci_fd.h"
#include "aci_io.h"
#include "psa.h"
#include "psa_t30.h"
#include "psa_cc.h"
#include "cmh.h"
#include "cmh_t30.h"
#include "cmh_cc.h"


#include "cmh_ra.h"

#include "psa_uart.h"
#include "cmh_uart.h"
#ifdef FF_PSI
#include "psa_psi.h"
#include "cmh_psi.h"
#include "ati_src_psi.h"
#endif /*FF_PSI*/

/*==== CONSTANTS ==================================================*/

#define T30_DEF_THLD    (90)    /* good page threshold in percent */

#ifdef _SIMULATION_
#define T30_DEF_FRMPRIM (3)     /* no. frames per primitive */
#else
#define T30_DEF_FRMPRIM (42)    /* no. frames per primitive */
#endif

/*==== EXPORT =====================================================*/

/* remove after testing ??? */
/* EXTERN void TST_getSimData(UBYTE *data, USHORT nomLen,
                           USHORT *actLen, UBYTE *final); */

/*==== VARIABLES ==================================================*/

/*==== FUNCTIONS ==================================================*/

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-PS (6147)         MODULE  : CMH_T30S                 |
| STATE   : code                  ROUTINE : sAT_PlusFCLASS           |
+--------------------------------------------------------------------+

  PURPOSE : This is the functional counterpart to the +FCLASS AT
            command which is responsible to set the class mode.

            <class_type>:   class mode.
*/

GLOBAL T_ACI_RETURN sAT_PlusFCLASS  ( T_ACI_CMD_SRC srcId,
                                   T_ACI_FCLASS_CLASS class_type )
{
  T_T30_CMD_PRM * pT30CmdPrm; /* points to T30 command parameters */

  TRACE_FUNCTION ("sAT_PlusFCLASS()");

/*
 *-------------------------------------------------------------------
 * check command source
 *-------------------------------------------------------------------
 */
  if(!cmh_IsVldCmdSrc (srcId))
  {
    ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
    return( AT_FAIL );
  }

  pT30CmdPrm = &fnd_cmhPrm[srcId].t30CmdPrm;

/*
 *-------------------------------------------------------------------
 * stop FIT timer
 *-------------------------------------------------------------------
 */
  cmhT30_StopFIT();

/*
 *-------------------------------------------------------------------
 * process the class_type parameter
 *-------------------------------------------------------------------
 */
  switch( class_type )
  {
    case( FCLASS_CLASS_NotPresent ):
      break;

    case( FCLASS_CLASS_Voice ):
    case( FCLASS_CLASS_Data  ):
    case( FCLASS_CLASS_Fax20 ):
      pT30CmdPrm -> FCLASSclass = class_type;
      break;

    case( FCLASS_CLASS_Fax2  ):         /* not implemented */
    default:

      ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
      return( AT_FAIL );
  }

/*
 *-------------------------------------------------------------------
 * start FIT timer
 *-------------------------------------------------------------------
 */
  cmhT30_StartFIT();

  return( AT_CMPL );
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-PS (6147)         MODULE  : CMH_T30S                 |
| STATE   : code                  ROUTINE : sAT_PlusFCR              |
+--------------------------------------------------------------------+

  PURPOSE : This is the functional counterpart to the +FCR AT
            command which is responsible to set the receive
            capability.

            <value>:   receive capability.
*/

GLOBAL T_ACI_RETURN sAT_PlusFCR  ( T_ACI_CMD_SRC srcId,
                                   T_ACI_FCR_VAL value )
{
  T_T30_CMD_PRM * pT30CmdPrm; /* points to T30 command parameters */

  TRACE_FUNCTION ("sAT_PlusFCR()");

/*
 *-------------------------------------------------------------------
 * check command source
 *-------------------------------------------------------------------
 */
  if(!cmh_IsVldCmdSrc (srcId))
  {
    ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
    return( AT_FAIL );
  }

  pT30CmdPrm = &fnd_cmhPrm[srcId].t30CmdPrm;

/*
 *-------------------------------------------------------------------
 * stop FIT timer
 *-------------------------------------------------------------------
 */
  cmhT30_StopFIT();

/*
 *-------------------------------------------------------------------
 * process the value parameter
 *-------------------------------------------------------------------
 */
  switch( value )
  {
    case( FCR_VAL_NotPresent ):
      break;

    case( FCR_VAL_NoRcvCap ):
    case( FCR_VAL_RcvCap  ):
      pT30CmdPrm -> FCRval = value;
      break;

    default:

      ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
      return( AT_FAIL );
  }

/*
 *-------------------------------------------------------------------
 * start FIT timer
 *-------------------------------------------------------------------
 */
  cmhT30_StartFIT();

  return( AT_CMPL );
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-PS (6147)         MODULE  : CMH_T30S                 |
| STATE   : code                  ROUTINE : sAT_PlusFLI              |
+--------------------------------------------------------------------+

  PURPOSE : This is the functional counterpart to the +FLI AT
            command which is responsible to set the local id string
            (CSI/TSI).

            <idStr>:   local id string(0 terminated).
*/

GLOBAL T_ACI_RETURN sAT_PlusFLI  ( T_ACI_CMD_SRC srcId,
                                   CHAR * idStr )
{
  T_T30_CMD_PRM * pT30CmdPrm; /* points to T30 command parameters */

  TRACE_FUNCTION ("sAT_PlusFLI()");

/*
 *-------------------------------------------------------------------
 * check command source
 *-------------------------------------------------------------------
 */
  if(!cmh_IsVldCmdSrc (srcId))
  {
    ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
    return( AT_FAIL );
  }

  pT30CmdPrm = &fnd_cmhPrm[srcId].t30CmdPrm;

/*
 *-------------------------------------------------------------------
 * stop FIT timer
 *-------------------------------------------------------------------
 */
  cmhT30_StopFIT();

/*
 *-------------------------------------------------------------------
 * process the idStr parameter
 *-------------------------------------------------------------------
 */
  if( ! idStr )
  {
    ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
    return( AT_FAIL );
  }

  strncpy( pT30CmdPrm -> FLIstr, idStr, MAX_ID_CHAR-1 );
  pT30CmdPrm -> FLIstr[MAX_ID_CHAR-1] = 0;

/*
 *-------------------------------------------------------------------
 * start FIT timer
 *-------------------------------------------------------------------
 */
  cmhT30_StartFIT();

  return( AT_CMPL );
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-PS (6147)         MODULE  : CMH_T30S                 |
| STATE   : code                  ROUTINE : sAT_PlusFPI              |
+--------------------------------------------------------------------+

  PURPOSE : This is the functional counterpart to the +FPI AT
            command which is responsible to set the local id string
            (CGI).

            <idStr>:   local id string(0 terminated).
*/

GLOBAL T_ACI_RETURN sAT_PlusFPI  ( T_ACI_CMD_SRC srcId,
                                   CHAR * idStr )
{
  T_T30_CMD_PRM * pT30CmdPrm; /* points to T30 command parameters */

  TRACE_FUNCTION ("sAT_PlusFPI()");

/*
 *-------------------------------------------------------------------
 * check command source
 *-------------------------------------------------------------------
 */
  if(!cmh_IsVldCmdSrc (srcId))
  {
    ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
    return( AT_FAIL );
  }

  pT30CmdPrm = &fnd_cmhPrm[srcId].t30CmdPrm;

/*
 *-------------------------------------------------------------------
 * stop FIT timer
 *-------------------------------------------------------------------
 */
  cmhT30_StopFIT();

/*
 *-------------------------------------------------------------------
 * process the idStr parameter
 *-------------------------------------------------------------------
 */
  if( ! idStr )
  {
    ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
    return( AT_FAIL );
  }

  strncpy( pT30CmdPrm -> FPIstr, idStr, MAX_ID_CHAR-1 );
  pT30CmdPrm -> FPIstr[MAX_ID_CHAR-1] = 0;

/*
 *-------------------------------------------------------------------
 * start FIT timer
 *-------------------------------------------------------------------
 */
  cmhT30_StartFIT();

  return( AT_CMPL );
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-PS (6147)         MODULE  : CMH_T30S                 |
| STATE   : code                  ROUTINE : sAT_PlusFSA              |
+--------------------------------------------------------------------+

  PURPOSE : This is the functional counterpart to the +FSA AT
            command which is responsible to set the destination
            subaddress string

            <subStr>:   destination subaddress string(0 terminated).
*/

GLOBAL T_ACI_RETURN sAT_PlusFSA  ( T_ACI_CMD_SRC srcId,
                                   CHAR * subStr )
{
  T_T30_CMD_PRM * pT30CmdPrm; /* points to T30 command parameters */

  TRACE_FUNCTION ("sAT_PlusFSA()");

/*
 *-------------------------------------------------------------------
 * check command source
 *-------------------------------------------------------------------
 */
  if(!cmh_IsVldCmdSrc (srcId))
  {
    ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
    return( AT_FAIL );
  }

  pT30CmdPrm = &fnd_cmhPrm[srcId].t30CmdPrm;

/*
 *-------------------------------------------------------------------
 * stop FIT timer
 *-------------------------------------------------------------------
 */
  cmhT30_StopFIT();

/*
 *-------------------------------------------------------------------
 * process the idStr parameter
 *-------------------------------------------------------------------
 */
  if( ! subStr )
  {
    ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
    return( AT_FAIL );
  }

  strncpy( pT30CmdPrm -> FSAsub, subStr, MAX_ID_CHAR-1 );
  pT30CmdPrm -> FSAsub[MAX_ID_CHAR-1] = 0;

/*
 *-------------------------------------------------------------------
 * start FIT timer
 *-------------------------------------------------------------------
 */
  cmhT30_StartFIT();

  return( AT_CMPL );
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-PS (6147)         MODULE  : CMH_T30S                 |
| STATE   : code                  ROUTINE : sAT_PlusFPA              |
+--------------------------------------------------------------------+

  PURPOSE : This is the functional counterpart to the +FPA AT
            command which is responsible to set the selective polling
            address string.

            <sepStr>:   selective polling address string(0 terminated).
*/

GLOBAL T_ACI_RETURN sAT_PlusFPA  ( T_ACI_CMD_SRC srcId,
                                   CHAR * sepStr )
{
  T_T30_CMD_PRM * pT30CmdPrm; /* points to T30 command parameters */

  TRACE_FUNCTION ("sAT_PlusFPA()");

/*
 *-------------------------------------------------------------------
 * check command source
 *-------------------------------------------------------------------
 */
  if(!cmh_IsVldCmdSrc (srcId))
  {
    ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
    return( AT_FAIL );
  }

  pT30CmdPrm = &fnd_cmhPrm[srcId].t30CmdPrm;

/*
 *-------------------------------------------------------------------
 * stop FIT timer
 *-------------------------------------------------------------------
 */
  cmhT30_StopFIT();

/*
 *-------------------------------------------------------------------
 * process the idStr parameter
 *-------------------------------------------------------------------
 */
  if( ! sepStr )
  {
    ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
    return( AT_FAIL );
  }

  strncpy( pT30CmdPrm -> FPAsep, sepStr, MAX_ID_CHAR-1 );
  pT30CmdPrm -> FPAsep[MAX_ID_CHAR-1] = 0;

/*
 *-------------------------------------------------------------------
 * start FIT timer
 *-------------------------------------------------------------------
 */
  cmhT30_StartFIT();

  return( AT_CMPL );
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-PS (6147)         MODULE  : CMH_T30S                 |
| STATE   : code                  ROUTINE : sAT_PlusFPW              |
+--------------------------------------------------------------------+

  PURPOSE : This is the functional counterpart to the +FPW AT
            command which is responsible to set the password string.

            <pwdStr>:   password string(0 terminated).
*/

GLOBAL T_ACI_RETURN sAT_PlusFPW  ( T_ACI_CMD_SRC srcId,
                                   CHAR * pwdStr )
{
  T_T30_CMD_PRM * pT30CmdPrm; /* points to T30 command parameters */

  TRACE_FUNCTION ("sAT_PlusFPW()");

/*
 *-------------------------------------------------------------------
 * check command source
 *-------------------------------------------------------------------
 */
  if(!cmh_IsVldCmdSrc (srcId))
  {
    ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
    return( AT_FAIL );
  }

  pT30CmdPrm = &fnd_cmhPrm[srcId].t30CmdPrm;

/*
 *-------------------------------------------------------------------
 * stop FIT timer
 *-------------------------------------------------------------------
 */
  cmhT30_StopFIT();

/*
 *-------------------------------------------------------------------
 * process the idStr parameter
 *-------------------------------------------------------------------
 */
  if( ! pwdStr )
  {
    ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
    return( AT_FAIL );
  }

  strncpy( pT30CmdPrm -> FPWpwd, pwdStr, MAX_ID_CHAR-1 );
  pT30CmdPrm -> FPWpwd[MAX_ID_CHAR-1] = 0;

/*
 *-------------------------------------------------------------------
 * start FIT timer
 *-------------------------------------------------------------------
 */
  cmhT30_StartFIT();

  return( AT_CMPL );
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-PS (6147)         MODULE  : CMH_T30S                 |
| STATE   : code                  ROUTINE : sAT_PlusFCC              |
+--------------------------------------------------------------------+

  PURPOSE : This is the functional counterpart to the +FCC AT
            command which is responsible to set the DCE capabilities.

            <vr>:   resolution.
            <br>:   bit rate.
            <wd>:   page width.
            <ln>:   page length.
            <df>:   data compression.
            <ec>:   error correction.
            <bt>:   file transer.
            <st>:   scan time.
            <jp>:   JPEG mode.
*/

GLOBAL T_ACI_RETURN sAT_PlusFCC  ( T_ACI_CMD_SRC srcId, T_ACI_F_VR vr,
                                   T_ACI_F_BR br, T_ACI_F_WD wd,
                                   T_ACI_F_LN ln, T_ACI_F_DF df,
                                   T_ACI_F_EC ec, T_ACI_F_BF bf,
                                   T_ACI_F_ST st, T_ACI_F_JP jp )
{
  T_T30_CMD_PRM * pT30CmdPrm; /* points to T30 command parameters */

  TRACE_FUNCTION ("sAT_PlusFCC()");

/*
 *-------------------------------------------------------------------
 * check command source
 *-------------------------------------------------------------------
 */
  if(!cmh_IsVldCmdSrc (srcId))
  {
    ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
    return( AT_FAIL );
  }

  pT30CmdPrm = &fnd_cmhPrm[srcId].t30CmdPrm;

/*
 *-------------------------------------------------------------------
 * stop FIT timer
 *-------------------------------------------------------------------
 */
  cmhT30_StopFIT();

/*
 *-------------------------------------------------------------------
 * process the vr parameter
 *-------------------------------------------------------------------
 */
  switch (vr)
  {
  case F_VR_NotPresent:
    vr = pT30CmdPrm -> FCCvr;
    break;

  case F_VR_R8X3_85:
  case F_VR_R8X7_7:
  case F_VR_R8X15_4:
  case F_VR_R16X15_4:
  case F_VR_200X100:
  case F_VR_200X200:
  case F_VR_200X400:
  case F_VR_300X300:
    break;

  default:
    ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
    return AT_FAIL;
  }

/*
 *-------------------------------------------------------------------
 * process the br parameter
 *-------------------------------------------------------------------
 */
  switch( br )
  {
    case( F_BR_NotPresent ):

      br = pT30CmdPrm -> FCCbr;
      break;

    case( F_BR_2400  ):
    case( F_BR_4800  ):
    case( F_BR_7200  ):
    case( F_BR_9600  ):
    case( F_BR_12000 ):
    case( F_BR_14400 ):

      break;

    default:

      ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
      return( AT_FAIL );
  }

/*
 *-------------------------------------------------------------------
 * process the wd parameter
 *-------------------------------------------------------------------
 */
  switch( wd )
  {
    case( F_WD_NotPresent ):

      wd = pT30CmdPrm -> FCCwd;
      break;

    case( F_WD_1728  ):
    case( F_WD_2048  ):
    case( F_WD_2432  ):
    case( F_WD_1216  ):
    case( F_WD_864 ):

      break;

    default:

      ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
      return( AT_FAIL );
  }

/*
 *-------------------------------------------------------------------
 * process the ln parameter
 *-------------------------------------------------------------------
 */
  switch( ln )
  {
    case( F_LN_NotPresent ):

      ln = pT30CmdPrm -> FCCln;
      break;

    case( F_LN_A4  ):
    case( F_LN_B4  ):
    case( F_LN_Unlimited  ):

      break;

    default:

      ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
      return( AT_FAIL );
  }

/*
 *-------------------------------------------------------------------
 * process the df parameter
 *-------------------------------------------------------------------
 */
  switch( df )
  {
    case( F_DF_NotPresent ):

      df = pT30CmdPrm -> FCCdf;
      break;

    case( F_DF_1D_MdfHuff  ):

      break;

    case( F_DF_2D_MdfRd_T4 ):       /* not implemented */
    case( F_DF_2D_Uncomp   ):       /* not implemented */
    case( F_DF_2D_MdfRd_T6 ):       /* not implemented */
    default:

      ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
      return( AT_FAIL );
  }

/*
 *-------------------------------------------------------------------
 * process the ec parameter
 *-------------------------------------------------------------------
 */
  switch( ec )
  {
    case( F_EC_NotPresent ):

      ec = pT30CmdPrm -> FCCec;
      break;

    case( F_EC_DisableECM  ):

      break;

    case( F_EC_EnableECM     ):       /* not implemented */
    case( F_EC_EnableHalfDup ):       /* not implemented */
    case( F_EC_EnableFullDup ):       /* not implemented */
    default:

      ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
      return( AT_FAIL );
  }

/*
 *-------------------------------------------------------------------
 * process the bf parameter
 *-------------------------------------------------------------------
 */
  if( bf NEQ F_BF_NotPresent )
  {
    if( bf > F_BF_DisableFileTrnsf )  /* others are not implemented */
    {
      ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
      return( AT_FAIL );
    }
  }
  else

    bf = pT30CmdPrm -> FCCbf;

/*
 *-------------------------------------------------------------------
 * process the st parameter
 *-------------------------------------------------------------------
 */
  switch( st )
  {
    case( F_ST_NotPresent ):

      st = pT30CmdPrm -> FCCst;
      break;

    case( F_ST_0_0   ):
    case( F_ST_5_5   ):
    case( F_ST_10_5  ):
    case( F_ST_10_10 ):
    case( F_ST_20_10 ):
    case( F_ST_20_20 ):
    case( F_ST_40_20 ):
    case( F_ST_40_40 ):

      break;

    default:

      ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
      return( AT_FAIL );
  }

/*
 *-------------------------------------------------------------------
 * process the jp parameter
 *-------------------------------------------------------------------
 */
  if( jp NEQ F_JP_NotPresent )
  {
    if( jp > F_JP_DisableJPEG )       /* others are not implemented */
    {
      ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
      return( AT_FAIL );
    }
  }
  else

    jp = pT30CmdPrm -> FCCjp;


/*
 *-------------------------------------------------------------------
 * assign the parameters
 *-------------------------------------------------------------------
 */
  pT30CmdPrm -> FCCvr = pT30CmdPrm -> FISvr = vr;
  pT30CmdPrm -> FCCbr = pT30CmdPrm -> FISbr = br;
  pT30CmdPrm -> FCCwd = pT30CmdPrm -> FISwd = wd;
  pT30CmdPrm -> FCCln = pT30CmdPrm -> FISln = ln;
  pT30CmdPrm -> FCCdf = pT30CmdPrm -> FISdf = df;
  pT30CmdPrm -> FCCec = pT30CmdPrm -> FISec = ec;
  pT30CmdPrm -> FCCbf = pT30CmdPrm -> FISbf = bf;
  pT30CmdPrm -> FCCst = pT30CmdPrm -> FISst = st;
  pT30CmdPrm -> FCCjp = pT30CmdPrm -> FISjp = jp;


/*
 *-------------------------------------------------------------------
 * start FIT timer
 *-------------------------------------------------------------------
 */
  cmhT30_StartFIT();

  return( AT_CMPL );
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-PS (6147)         MODULE  : CMH_T30S                 |
| STATE   : code                  ROUTINE : sAT_PlusFIS              |
+--------------------------------------------------------------------+

  PURPOSE : This is the functional counterpart to the +FIS AT
            command which is responsible to set the current session
            capabilities.

            <vr>:   resolution.
            <br>:   bit rate.
            <wd>:   page width.
            <ln>:   page length.
            <df>:   data compression.
            <ec>:   error correction.
            <bt>:   file transer.
            <st>:   scan time.
            <jp>:   JPEG mode.
*/

GLOBAL T_ACI_RETURN sAT_PlusFIS  ( T_ACI_CMD_SRC srcId, T_ACI_F_VR vr,
                                   T_ACI_F_BR br, T_ACI_F_WD wd,
                                   T_ACI_F_LN ln, T_ACI_F_DF df,
                                   T_ACI_F_EC ec, T_ACI_F_BF bf,
                                   T_ACI_F_ST st, T_ACI_F_JP jp )
{
  T_T30_CMD_PRM * pT30CmdPrm; /* points to T30 command parameters */

  TRACE_FUNCTION ("sAT_PlusFIS()");

/*
 *-------------------------------------------------------------------
 * check command source
 *-------------------------------------------------------------------
 */
  if(!cmh_IsVldCmdSrc (srcId))
  {
    ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
    return( AT_FAIL );
  }

  pT30CmdPrm = &fnd_cmhPrm[srcId].t30CmdPrm;

/*
 *-------------------------------------------------------------------
 * stop FIT timer
 *-------------------------------------------------------------------
 */
  cmhT30_StopFIT();

/*
 *-------------------------------------------------------------------
 * process the vr parameter
 *-------------------------------------------------------------------
 */
  switch (vr)
  {
  case F_VR_NotPresent:
    vr = pT30CmdPrm -> FISvr;
    break;

  case F_VR_R8X3_85:
  case F_VR_R8X7_7:
  case F_VR_R8X15_4:
  case F_VR_R16X15_4:
  case F_VR_200X100:
  case F_VR_200X200:
  case F_VR_200X400:
  case F_VR_300X300:
    break;

  default:
    ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
    return AT_FAIL;
  }

/*
 *-------------------------------------------------------------------
 * process the br parameter
 *-------------------------------------------------------------------
 */
  switch( br )
  {
    case( F_BR_NotPresent ):

      br = pT30CmdPrm -> FISbr;
      break;

    case( F_BR_2400  ):
    case( F_BR_4800  ):
    case( F_BR_7200  ):
    case( F_BR_9600  ):
    case( F_BR_12000 ):
    case( F_BR_14400 ):

      break;

    default:

      ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
      return( AT_FAIL );
  }

/*
 *-------------------------------------------------------------------
 * process the wd parameter
 *-------------------------------------------------------------------
 */
  switch( wd )
  {
    case( F_WD_NotPresent ):

      wd = pT30CmdPrm -> FISwd;
      break;

    case( F_WD_1728  ):
    case( F_WD_2048  ):
    case( F_WD_2432  ):
    case( F_WD_1216  ):
    case( F_WD_864 ):

      break;

    default:

      ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
      return( AT_FAIL );
  }

/*
 *-------------------------------------------------------------------
 * process the ln parameter
 *-------------------------------------------------------------------
 */
  switch( ln )
  {
    case( F_LN_NotPresent ):

      ln = pT30CmdPrm -> FISln;
      break;

    case( F_LN_A4  ):
    case( F_LN_B4  ):
    case( F_LN_Unlimited  ):

      break;

    default:

      ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
      return( AT_FAIL );
  }

/*
 *-------------------------------------------------------------------
 * process the df parameter
 *-------------------------------------------------------------------
 */
  switch( df )
  {
    case( F_DF_NotPresent ):

      df = pT30CmdPrm -> FISdf;
      break;

    case( F_DF_1D_MdfHuff  ):

      break;

    case( F_DF_2D_MdfRd_T4 ):       /* not implemented */
    case( F_DF_2D_Uncomp   ):       /* not implemented */
    case( F_DF_2D_MdfRd_T6 ):       /* not implemented */
    default:

      ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
      return( AT_FAIL );
  }

/*
 *-------------------------------------------------------------------
 * process the ec parameter
 *-------------------------------------------------------------------
 */
  switch( ec )
  {
    case( F_EC_NotPresent ):

      ec = pT30CmdPrm -> FISec;
      break;

    case( F_EC_DisableECM  ):

      break;

    case( F_EC_EnableECM     ):       /* not implemented */
    case( F_EC_EnableHalfDup ):       /* not implemented */
    case( F_EC_EnableFullDup ):       /* not implemented */
    default:

      ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
      return( AT_FAIL );
  }

/*
 *-------------------------------------------------------------------
 * process the bf parameter
 *-------------------------------------------------------------------
 */
  if( bf NEQ F_BF_NotPresent )
  {
    if( bf > F_BF_DisableFileTrnsf )  /* others are not implemented */
    {
      ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
      return( AT_FAIL );
    }
  }
  else

    bf = pT30CmdPrm -> FISbf;

/*
 *-------------------------------------------------------------------
 * process the st parameter
 *-------------------------------------------------------------------
 */
  switch( st )
  {
    case( F_ST_NotPresent ):

      st = pT30CmdPrm -> FISst;
      break;

    case( F_ST_0_0   ):
    case( F_ST_5_5   ):
    case( F_ST_10_5  ):
    case( F_ST_10_10 ):
    case( F_ST_20_10 ):
    case( F_ST_20_20 ):
    case( F_ST_40_20 ):
    case( F_ST_40_40 ):

      break;

    default:

      ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
      return( AT_FAIL );
  }

/*
 *-------------------------------------------------------------------
 * process the jp parameter
 *-------------------------------------------------------------------
 */
  if( jp NEQ F_JP_NotPresent )
  {
    if( jp > F_JP_DisableJPEG )       /* others are not implemented */
    {
      ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
      return( AT_FAIL );
    }
  }
  else

    jp = pT30CmdPrm -> FISjp;

/*
 *-------------------------------------------------------------------
 * assign the parameters
 *-------------------------------------------------------------------
 */
  pT30CmdPrm -> FISvr = vr;
  pT30CmdPrm -> FISbr = br;
  pT30CmdPrm -> FISwd = wd;
  pT30CmdPrm -> FISln = ln;
  pT30CmdPrm -> FISdf = df;
  pT30CmdPrm -> FISec = ec;
  pT30CmdPrm -> FISbf = bf;
  pT30CmdPrm -> FISst = st;
  pT30CmdPrm -> FISjp = jp;

/*
 *-------------------------------------------------------------------
 * start FIT timer
 *-------------------------------------------------------------------
 */
  cmhT30_StartFIT();

  return( AT_CMPL );
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-PS (6147)         MODULE  : CMH_T30S                 |
| STATE   : code                  ROUTINE : sAT_PlusFNS              |
+--------------------------------------------------------------------+

  PURPOSE : This is the functional counterpart to the +FNS AT
            command which is responsible to set the string for
            non-standard facilities.

            <len>:   length of nsf string.
            <nsf>:   nsf octed string.
*/

GLOBAL T_ACI_RETURN sAT_PlusFNS  ( T_ACI_CMD_SRC srcId,
                                   UBYTE len,
                                   UBYTE * nsf )
{
  T_T30_CMD_PRM * pT30CmdPrm; /* points to T30 command parameters */

  TRACE_FUNCTION ("sAT_PlusFNS()");

/*
 *-------------------------------------------------------------------
 * check command source
 *-------------------------------------------------------------------
 */
  if(!cmh_IsVldCmdSrc (srcId))
  {
    ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
    return( AT_FAIL );
  }

  pT30CmdPrm = &fnd_cmhPrm[srcId].t30CmdPrm;

/*
 *-------------------------------------------------------------------
 * stop FIT timer
 *-------------------------------------------------------------------
 */
  cmhT30_StopFIT();

/*
 *-------------------------------------------------------------------
 * process the len and nsf parameter
 *-------------------------------------------------------------------
 */
  if((len > 0 AND ! nsf) OR len > MAX_NSF_BYTE )
  {
    ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
    return( AT_FAIL );
  }

  if( len EQ 0 )
  {
    pT30CmdPrm -> FNSlen = 0;
  }
  else
  {
    if (MINIMUM(MAX_NSF_BYTE - pT30CmdPrm -> FNSlen, len))
    {
      memcpy( &pT30CmdPrm -> FNSoct[pT30CmdPrm -> FNSlen], nsf,
              MINIMUM(MAX_NSF_BYTE - pT30CmdPrm -> FNSlen, len) );
    }

    pT30CmdPrm -> FNSlen +=
                  MINIMUM(MAX_NSF_BYTE - pT30CmdPrm -> FNSlen, len);
  }

/*
 *-------------------------------------------------------------------
 * start FIT timer
 *-------------------------------------------------------------------
 */
  cmhT30_StartFIT();

  return( AT_CMPL );
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-PS (6147)         MODULE  : CMH_T30S                 |
| STATE   : code                  ROUTINE : sAT_PlusFLP              |
+--------------------------------------------------------------------+

  PURPOSE : This is the functional counterpart to the +FLP AT
            command which is responsible to indicate a document for
            polling.

            <value>: polling indication.
*/

GLOBAL T_ACI_RETURN sAT_PlusFLP   (T_ACI_CMD_SRC srcId,
                                   T_ACI_FLP_VAL value )
{
  T_T30_CMD_PRM * pT30CmdPrm; /* points to T30 command parameters */

  TRACE_FUNCTION ("sAT_PlusFLP()");

/*
 *-------------------------------------------------------------------
 * check command source
 *-------------------------------------------------------------------
 */
  if(!cmh_IsVldCmdSrc (srcId))
  {
    ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
    return( AT_FAIL );
  }

  pT30CmdPrm = &fnd_cmhPrm[srcId].t30CmdPrm;

/*
 *-------------------------------------------------------------------
 * stop FIT timer
 *-------------------------------------------------------------------
 */
  cmhT30_StopFIT();

/*
 *-------------------------------------------------------------------
 * process the value parameter
 *-------------------------------------------------------------------
 */
  switch( value )
  {
    case( FLP_VAL_NotPresent ):

      break;

    case( FLP_VAL_NoPollDoc  ):
    case( FLP_VAL_PollDoc    ):

      pT30CmdPrm -> FLPval = value;
      break;

    default:

      ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
      return( AT_FAIL );
  }

/*
 *-------------------------------------------------------------------
 * start FIT timer
 *-------------------------------------------------------------------
 */
  cmhT30_StartFIT();

  return( AT_CMPL );
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-PS (6147)         MODULE  : CMH_T30S                 |
| STATE   : code                  ROUTINE : sAT_PlusFIE              |
+--------------------------------------------------------------------+

  PURPOSE : This is the functional counterpart to the +FIE AT
            command which is responsible to enable procedure interrupts.

            <value>: PI mode.
*/

GLOBAL T_ACI_RETURN sAT_PlusFIE   (T_ACI_CMD_SRC srcId,
                                   T_ACI_FIE_VAL value )
{
  T_T30_CMD_PRM * pT30CmdPrm; /* points to T30 command parameters */

  TRACE_FUNCTION ("sAT_PlusFIE()");

/*
 *-------------------------------------------------------------------
 * check command source
 *-------------------------------------------------------------------
 */
  if(!cmh_IsVldCmdSrc (srcId))
  {
    ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
    return( AT_FAIL );
  }

  pT30CmdPrm = &fnd_cmhPrm[srcId].t30CmdPrm;

/*
 *-------------------------------------------------------------------
 * stop FIT timer
 *-------------------------------------------------------------------
 */
  cmhT30_StopFIT();

/*
 *-------------------------------------------------------------------
 * process the value parameter
 *-------------------------------------------------------------------
 */
  switch( value )
  {
    case( FIE_VAL_NotPresent ):

      break;

    case( FIE_VAL_IgnorePRI ):
    case( FIE_VAL_AcceptPRI ):

      pT30CmdPrm -> FIEval = value;
      break;

    default:

      ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
      return( AT_FAIL );
  }

/*
 *-------------------------------------------------------------------
 * start FIT timer
 *-------------------------------------------------------------------
 */
  cmhT30_StartFIT();

  return( AT_CMPL );
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-PS (6147)         MODULE  : CMH_T30S                 |
| STATE   : code                  ROUTINE : sAT_PlusFCQ              |
+--------------------------------------------------------------------+

  PURPOSE : This is the functional counterpart to the +FCQ AT
            command which is responsible to set the copy quality
            checking.

            <rq>: receive quality.
            <tq>: transmit quality.
*/

GLOBAL T_ACI_RETURN sAT_PlusFCQ   (T_ACI_CMD_SRC srcId,
                                   T_ACI_FCQ_RQ  rq,
                                                 T_ACI_FCQ_TQ  tq )
{
  T_T30_CMD_PRM * pT30CmdPrm; /* points to T30 command parameters */

  TRACE_FUNCTION ("sAT_PlusFCQ()");

/*
 *-------------------------------------------------------------------
 * check command source
 *-------------------------------------------------------------------
 */
  if(!cmh_IsVldCmdSrc (srcId))
  {
    ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
    return( AT_FAIL );
  }

  pT30CmdPrm = &fnd_cmhPrm[srcId].t30CmdPrm;

/*
 *-------------------------------------------------------------------
 * stop FIT timer
 *-------------------------------------------------------------------
 */
  cmhT30_StopFIT();

/*
 *-------------------------------------------------------------------
 * process the rq parameter
 *-------------------------------------------------------------------
 */
  switch( rq )
  {
    case( FCQ_RQ_NotPresent ):

      rq = pT30CmdPrm -> FCQrq;
      break;

    case( FCQ_RQ_CQCDisabled ):
    case( FCQ_RQ_CQCEnabled  ):

      break;

    case( FCQ_RQ_CQCandCorrection ):
    default:

      ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
      return( AT_FAIL );
  }

/*
 *-------------------------------------------------------------------
 * process the tq parameter
 *-------------------------------------------------------------------
 */
  switch( tq )
  {
    case( FCQ_TQ_NotPresent ):
    case( FCQ_TQ_CQCDisabled ):

      break;

    case( FCQ_TQ_CQCEnabled  ):
    case( FCQ_TQ_CQCandCorrection ):
    default:

      ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
      return( AT_FAIL );
  }

/*
 *-------------------------------------------------------------------
 * assign the parameters
 *-------------------------------------------------------------------
 */
  pT30CmdPrm -> FCQrq = rq;

/*
 *-------------------------------------------------------------------
 * start FIT timer
 *-------------------------------------------------------------------
 */
  cmhT30_StartFIT();

  return( AT_CMPL );
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-PS (6147)         MODULE  : CMH_T30S                 |
| STATE   : code                  ROUTINE : sAT_PlusFIT              |
+--------------------------------------------------------------------+

  PURPOSE : This is the functional counterpart to the +FIT AT
            command which is responsible to set the inactivity timeout.

            <time>: inactivity timeout.
            <act> : action.
*/

GLOBAL T_ACI_RETURN sAT_PlusFIT   (T_ACI_CMD_SRC        srcId,
                                   SHORT                time,
                                   T_ACI_FIT_ACT        act )
{
  T_T30_CMD_PRM * pT30CmdPrm; /* points to T30 command parameters */

  TRACE_FUNCTION ("sAT_PlusFIT()");

/*
 *-------------------------------------------------------------------
 * check command source
 *-------------------------------------------------------------------
 */
  if(!cmh_IsVldCmdSrc (srcId))
  {
    ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
    return( AT_FAIL );
  }

  pT30CmdPrm = &fnd_cmhPrm[srcId].t30CmdPrm;

/*
 *-------------------------------------------------------------------
 * stop FIT timer
 *-------------------------------------------------------------------
 */
  cmhT30_StopFIT();

/*
 *-------------------------------------------------------------------
 * process the act parameter
 *-------------------------------------------------------------------
 */
  switch( act )
  {
    case( FIT_ACT_NotPresent ):

      act = pT30CmdPrm -> FITact;
      break;

    case( FIT_ACT_OnHookRst ):
    case( FIT_ACT_OnHook    ):

      break;

    default:

      ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
      return( AT_FAIL );
  }

/*
 *-------------------------------------------------------------------
 * process the time parameter
 *-------------------------------------------------------------------
 */
  if( time > 255 )
  {
    ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
    return( AT_FAIL );
  }

/*
 *-------------------------------------------------------------------
 * assign the parameters
 *-------------------------------------------------------------------
 */
  pT30CmdPrm -> FITact = act;

  if( time NEQ ACI_NumParmNotPresent )
  {
    pT30CmdPrm -> FITtime =  time * 1000;
  }

/*
 *-------------------------------------------------------------------
 * start FIT timer
 *-------------------------------------------------------------------
 */
  cmhT30_StartFIT();

  return( AT_CMPL );
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-PS (6147)         MODULE  : CMH_T30S                 |
| STATE   : code                  ROUTINE : sAT_PlusFBO              |
+--------------------------------------------------------------------+

  PURPOSE : This is the functional counterpart to the +FBO AT
            command which is responsible to set data bit order.

            <value>: data bit order.
*/

GLOBAL T_ACI_RETURN sAT_PlusFBO   (T_ACI_CMD_SRC        srcId,
                                   T_ACI_FBO_VAL        value )
{
  T_T30_CMD_PRM * pT30CmdPrm; /* points to T30 command parameters */

  TRACE_FUNCTION ("sAT_PlusFBO()");

/*
 *-------------------------------------------------------------------
 * check command source
 *-------------------------------------------------------------------
 */
  if(!cmh_IsVldCmdSrc (srcId))
  {
    ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
    return( AT_FAIL );
  }

  pT30CmdPrm = &fnd_cmhPrm[srcId].t30CmdPrm;

/*
 *-------------------------------------------------------------------
 * stop FIT timer
 *-------------------------------------------------------------------
 */
  cmhT30_StopFIT();

/*
 *-------------------------------------------------------------------
 * process the value parameter
 *-------------------------------------------------------------------
 */
  switch( value )
  {
    case( FBO_VAL_NotPresent ):

      value = pT30CmdPrm -> FBOval;
      break;

    case( FBO_VAL_DirCDirBD ):
    case( FBO_VAL_RvrCDirBD ):
    case( FBO_VAL_DirCRvrBD ):
    case( FBO_VAL_RvrCRvrBD ):

      break;

    default:

      ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
      return( AT_FAIL );
  }

/*
 *-------------------------------------------------------------------
 * assign the parameters
 *-------------------------------------------------------------------
 */
  pT30CmdPrm -> FBOval = value;

/*
 *-------------------------------------------------------------------
 * start FIT timer
 *-------------------------------------------------------------------
 */
  cmhT30_StartFIT();

  return( AT_CMPL );
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-PS (6147)         MODULE  : CMH_T30S                 |
| STATE   : code                  ROUTINE : sAT_PlusFRQ              |
+--------------------------------------------------------------------+

  PURPOSE : This is the functional counterpart to the +FRQ AT
            command which is responsible to set the receive quality
            thresholds.

            <pgl>: percentage of good lines.
            <cbl>: consecutive bad lines.
*/

GLOBAL T_ACI_RETURN sAT_PlusFRQ   (T_ACI_CMD_SRC srcId,
                                   SHORT pgl,
                                   SHORT cbl )
{
  TRACE_FUNCTION ("sAT_PlusFRQ()");

  /* process the pgl parameter */
  if( pgl NEQ 0 )
  {
    ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
    return( AT_FAIL );
  }

  /* process the cbl parameter */
  if( cbl NEQ 0 )
  {
    ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
    return( AT_FAIL );
  }

  /* start FIT timer */
  cmhT30_StartFIT();

  return( AT_CMPL );
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-PS (6147)         MODULE  : CMH_T30S                 |
| STATE   : code                  ROUTINE : sAT_PlusFEA              |
+--------------------------------------------------------------------+

  PURPOSE : This is the functional counterpart to the +FEA AT
            command which is responsible to set phase C EOL alignment.

            <value>: alignment.
*/

GLOBAL T_ACI_RETURN sAT_PlusFEA   (T_ACI_CMD_SRC srcId,
                                   SHORT value )
{

  TRACE_FUNCTION ("sAT_PlusFEA()");

/*
 *-------------------------------------------------------------------
 * process the value parameter
 *-------------------------------------------------------------------
 */
  if( value NEQ ACI_NumParmNotPresent )
  {
    if( value NEQ 0 )
    {
      ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
      return( AT_FAIL );
    }
  }

/*
 *-------------------------------------------------------------------
 * start FIT timer
 *-------------------------------------------------------------------
 */
  cmhT30_StartFIT();

  return( AT_CMPL );
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-PS (6147)         MODULE  : CMH_T30S                 |
| STATE   : code                  ROUTINE : sAT_PlusFCT              |
+--------------------------------------------------------------------+

  PURPOSE : This is the functional counterpart to the +FCT AT
            command which is responsible to set phase C response
            timeout.

            <value>: timeout.
*/

GLOBAL T_ACI_RETURN sAT_PlusFCT   (T_ACI_CMD_SRC srcId,
                                   SHORT value )
{

  TRACE_FUNCTION ("sAT_PlusFCT()");

/*
 *-------------------------------------------------------------------
 * process the value parameter
 *-------------------------------------------------------------------
 */
  if( value NEQ ACI_NumParmNotPresent )
  {
    if( value NEQ 30 )
    {
      ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
      return( AT_FAIL );
    }
  }

/*
 *-------------------------------------------------------------------
 * start FIT timer
 *-------------------------------------------------------------------
 */
  cmhT30_StartFIT();

  return( AT_CMPL );
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-PS (6147)         MODULE  : CMH_T30S                 |
| STATE   : code                  ROUTINE : sAT_PlusFMS              |
+--------------------------------------------------------------------+

  PURPOSE : This is the functional counterpart to the +FMS AT
            command which is responsible to set the minimum phase C
            speed.

            <br>: minimum phase C baud rate.
*/

GLOBAL T_ACI_RETURN sAT_PlusFMS (T_ACI_CMD_SRC srcId,
                                 T_ACI_F_BR br)
{
  T_T30_CMD_PRM * pT30CmdPrm; /* points to T30 command parameters */

  TRACE_FUNCTION ("sAT_PlusFMS()");

/*
 *-------------------------------------------------------------------
 * check command source
 *-------------------------------------------------------------------
 */
  if(!cmh_IsVldCmdSrc (srcId))
  {
    ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
    return( AT_FAIL );
  }

  pT30CmdPrm = &fnd_cmhPrm[srcId].t30CmdPrm;

/*
 *-------------------------------------------------------------------
 * stop FIT timer
 *-------------------------------------------------------------------
 */
  cmhT30_StopFIT();

/*
 *-------------------------------------------------------------------
 * process the br parameter
 *-------------------------------------------------------------------
 */
  switch( br )
  {
    case( F_BR_NotPresent ):

      break;

    case( F_BR_2400  ):
    case( F_BR_4800  ):
    case( F_BR_7200  ):
    case( F_BR_9600  ):
    case( F_BR_12000 ):
    case( F_BR_14400 ):

      pT30CmdPrm -> FMSbr = br;
      break;

    default:

      ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
      return( AT_FAIL );
  }

/*
 *-------------------------------------------------------------------
 * start FIT timer
 *-------------------------------------------------------------------
 */
  cmhT30_StartFIT();

  return( AT_CMPL );
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-PS (6147)         MODULE  : CMH_T30S                 |
| STATE   : code                  ROUTINE : sAT_PlusFFC              |
+--------------------------------------------------------------------+

  PURPOSE : This is the functional counterpart to the +FFC AT
            command which is responsible to set the format conversion
            parameters.

            <vrc>: vertical resolution format.
            <dfc>: data format.
            <lnc>: page length format.
            <wdc>: page width format.
*/

GLOBAL T_ACI_RETURN sAT_PlusFFC (T_ACI_CMD_SRC srcId,
                                 T_ACI_FFC_VRC vrc,
                                 T_ACI_FFC_DFC dfc,
                                 T_ACI_FFC_LNC lnc,
                                 T_ACI_FFC_WDC wdc)
{

  TRACE_FUNCTION ("sAT_PlusFFC()");

/*
 *-------------------------------------------------------------------
 * process the vrc parameter
 *-------------------------------------------------------------------
 */
  if( vrc NEQ FFC_VRC_NotPresent )
  {
    if( vrc NEQ FFC_VRC_Ignored )
    {
      ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
      return( AT_FAIL );
    }
  }

/*
 *-------------------------------------------------------------------
 * process the dfc parameter
 *-------------------------------------------------------------------
 */
  if( dfc NEQ FFC_DFC_NotPresent )
  {
    if( dfc NEQ FFC_DFC_Ignored )
    {
      ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
      return( AT_FAIL );
    }
  }

/*
 *-------------------------------------------------------------------
 * process the lnc parameter
 *-------------------------------------------------------------------
 */
  if( lnc NEQ FFC_LNC_NotPresent )
  {
    if( lnc NEQ FFC_LNC_Ignored )
    {
      ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
      return( AT_FAIL );
    }
  }

/*
 *-------------------------------------------------------------------
 * process the wdc parameter
 *-------------------------------------------------------------------
 */
  if( wdc NEQ FFC_WDC_NotPresent )
  {
    if( wdc NEQ FFC_WDC_Ignored )
    {
      ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
      return( AT_FAIL );
    }
  }

/*
 *-------------------------------------------------------------------
 * start FIT timer
 *-------------------------------------------------------------------
 */
  cmhT30_StartFIT();

  return( AT_CMPL );
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-PS (6147)         MODULE  : CMH_T30S                 |
| STATE   : code                  ROUTINE : sAT_PlusFIP              |
+--------------------------------------------------------------------+

  PURPOSE : This is the functional counterpart to the +FIP AT
            command which is responsible to reset the FAX parameter to
            their initial value.

*/

GLOBAL T_ACI_RETURN sAT_PlusFIP (T_ACI_CMD_SRC srcId)
{

  TRACE_FUNCTION ("sAT_PlusFIP()");

/*
 *-------------------------------------------------------------------
 * check command source and reset parameters
 *-------------------------------------------------------------------
 */
  if(!cmh_IsVldCmdSrc (srcId))
  {
    ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
    return( AT_FAIL );
  }

  cmhT30_StopFIT();

  cmhT30_InitFAXPrms( srcId );

  cmhT30_RstNgtPrms();

/*
 *-------------------------------------------------------------------
 * start FIT timer
 *-------------------------------------------------------------------
 */
  cmhT30_StartFIT();

  return( AT_CMPL );
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-PS (6147)         MODULE  : CMH_T30S                 |
| STATE   : code                  ROUTINE : sAT_PlusFPS              |
+--------------------------------------------------------------------+

  PURPOSE : This is the functional counterpart to the +FPS AT command
            which is responsible to set the post page response.

            <ppr>:   post page response.
*/

GLOBAL T_ACI_RETURN sAT_PlusFPS (T_ACI_CMD_SRC srcId,
                                 T_ACI_FPS_PPR ppr )
{
  T_T30_CMD_PRM * pT30CmdPrm; /* points to T30 command parameters */

  TRACE_FUNCTION ("sAT_PlusFPS()");

/*
 *-------------------------------------------------------------------
 * check command source
 *-------------------------------------------------------------------
 */
  if(!cmh_IsVldCmdSrc (srcId))
  {
    ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
    return( AT_FAIL );
  }

  pT30CmdPrm = &fnd_cmhPrm[srcId].t30CmdPrm;

/*
 *-------------------------------------------------------------------
 * stop FIT timer
 *-------------------------------------------------------------------
 */
  cmhT30_StopFIT();

/*
 *-------------------------------------------------------------------
 * process the ppr parameter
 *-------------------------------------------------------------------
 */
  switch( ppr )
  {
    case( FPS_PPR_NotPresent ):
      break;

    case( FPS_PPR_Mcf ):
    case( FPS_PPR_Rtn ):
    case( FPS_PPR_Rtp ):
    case( FPS_PPR_Pip ):
    case( FPS_PPR_Pin ):

      pT30CmdPrm -> FPSppr = ppr;
      break;

    default:

      ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
      return( AT_FAIL );
  }

/*
 *-------------------------------------------------------------------
 * start FIT timer
 *-------------------------------------------------------------------
 */
  cmhT30_StartFIT();

  return( AT_CMPL );
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-PS (6147)         MODULE  : CMH_T30S                 |
| STATE   : code                  ROUTINE : sAT_PlusFSP              |
+--------------------------------------------------------------------+

  PURPOSE : This is the functional counterpart to the +FSP AT command
            which is responsible to set the possibility of polling.

            <value>:   polling mode.
*/

GLOBAL T_ACI_RETURN sAT_PlusFSP   (T_ACI_CMD_SRC srcId,
                                   T_ACI_FSP_VAL value )
{
  T_T30_CMD_PRM * pT30CmdPrm; /* points to T30 command parameters */

  TRACE_FUNCTION ("sAT_PlusFSP()");

/*
 *-------------------------------------------------------------------
 * check command source
 *-------------------------------------------------------------------
 */
  if(!cmh_IsVldCmdSrc (srcId))
  {
    ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
    return( AT_FAIL );
  }

  pT30CmdPrm = &fnd_cmhPrm[srcId].t30CmdPrm;

/*
 *-------------------------------------------------------------------
 * stop FIT timer
 *-------------------------------------------------------------------
 */
  cmhT30_StopFIT();

/*
 *-------------------------------------------------------------------
 * process the value parameter
 *-------------------------------------------------------------------
 */
  switch( value )
  {
    case( FSP_VAL_NotPresent ):
      break;

    case( FSP_VAL_PollDisabled ):
    case( FSP_VAL_PollEnable ):

      pT30CmdPrm -> FSPval = value;
      break;

    default:

      ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
      return( AT_FAIL );
  }

/*
 *-------------------------------------------------------------------
 * start FIT timer
 *-------------------------------------------------------------------
 */
  cmhT30_StartFIT();

  return( AT_CMPL );
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-PS (6147)         MODULE  : CMH_T30S                 |
| STATE   : code                  ROUTINE : sAT_PlusFAP              |
+--------------------------------------------------------------------+

  PURPOSE : This is the functional counterpart to the +FAP AT
            command which is responsible to set the address and
            polling capabilities.

            <sub>: destination subaddressing.
            <sep>: selective polling.
            <pwd>: password.
*/

GLOBAL T_ACI_RETURN sAT_PlusFAP   (T_ACI_CMD_SRC srcId,
                                   T_ACI_FAP_VAL sub,
                                   T_ACI_FAP_VAL sep,
                                   T_ACI_FAP_VAL pwd )
{
  T_T30_CMD_PRM * pT30CmdPrm; /* points to T30 command parameters */

  TRACE_FUNCTION ("sAT_PlusFAP()");

/*
 *-------------------------------------------------------------------
 * check command source
 *-------------------------------------------------------------------
 */
  if(!cmh_IsVldCmdSrc (srcId))
  {
    ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
    return( AT_FAIL );
  }

  pT30CmdPrm = &fnd_cmhPrm[srcId].t30CmdPrm;

/*
 *-------------------------------------------------------------------
 * stop FIT timer
 *-------------------------------------------------------------------
 */
  cmhT30_StopFIT();

/*
 *-------------------------------------------------------------------
 * process the sub parameter
 *-------------------------------------------------------------------
 */
  switch( sub )
  {
    case( FAP_VAL_NotPresent ):

      sub = pT30CmdPrm -> FAPsub;
      break;

    case( FAP_VAL_Disabled ):
    case( FAP_VAL_Enabled  ):

      break;

    default:

      ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
      return( AT_FAIL );
  }

/*
 *-------------------------------------------------------------------
 * process the sub parameter
 *-------------------------------------------------------------------
 */
  switch( sep )
  {
    case( FAP_VAL_NotPresent ):

      sep = pT30CmdPrm -> FAPsep;
      break;

    case( FAP_VAL_Disabled ):
    case( FAP_VAL_Enabled  ):

      break;

    default:

      ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
      return( AT_FAIL );
  }

/*
 *-------------------------------------------------------------------
 * process the sub parameter
 *-------------------------------------------------------------------
 */
  switch( pwd )
  {
    case( FAP_VAL_NotPresent ):

      pwd = pT30CmdPrm -> FAPpwd;
      break;

    case( FAP_VAL_Disabled ):
    case( FAP_VAL_Enabled  ):

      break;

    default:

      ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
      return( AT_FAIL );
  }

/*
 *-------------------------------------------------------------------
 * assign the parameters
 *-------------------------------------------------------------------
 */
  pT30CmdPrm -> FAPsub = sub;
  pT30CmdPrm -> FAPsep = sep;
  pT30CmdPrm -> FAPpwd = pwd;

/*
 *-------------------------------------------------------------------
 * start FIT timer
 *-------------------------------------------------------------------
 */
  cmhT30_StartFIT();

  return( AT_CMPL );
}


/*
+--------------------------------------------------------------------+
| PROJECT : GSM-PS (6147)         MODULE  : CMH_T30S                 |
| STATE   : code                  ROUTINE : sAT_PlusFDT              |
+--------------------------------------------------------------------+

  PURPOSE : This is the functional counterpart to the +FDT AT
            command which is responsible to transmit FAX data.

*/

GLOBAL T_ACI_RETURN sAT_PlusFDT (T_ACI_CMD_SRC srcId)
{

  TRACE_FUNCTION ("sAT_PlusFDT()");

/*
 *-------------------------------------------------------------------
 * check command source
 *-------------------------------------------------------------------
 */
   if(!cmh_IsVldCmdSrc (srcId) OR
      !psaCC_ctbIsValid (t30ShrdPrm.cId) OR
     (t30ShrdPrm.faxStat NEQ FS_IDL AND t30ShrdPrm.faxStat NEQ FS_SND_DOC))
  {
    ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
    return( AT_FAIL );
  }

/*
 *-------------------------------------------------------------------
 * stop FIT timer
 *-------------------------------------------------------------------
 */
  cmhT30_StopFIT();

/*
 *-------------------------------------------------------------------
 * check entity status
 *-------------------------------------------------------------------
 */
  if( t30EntStat.curCmd NEQ AT_CMD_NONE )

    return( AT_BUSY );

  t30EntStat.curCmd = AT_CMD_FDT;
  t30EntStat.entOwn = srcId;

/*
 *-------------------------------------------------------------------
 * negotiate transmission parameters and send DCS
 *-------------------------------------------------------------------
 */
  if( t30ShrdPrm.faxStat EQ FS_IDL OR
      t30ShrdPrm.faxStat EQ FS_DOC_TRF )
  {
    cmhT30_NgtDCEPrms( srcId );

    /* check for minimum speed condition */
    if( t30NgtPrms.FCSbr < fnd_cmhPrm[srcId].t30CmdPrm.FMSbr )
    {
      TRACE_EVENT("DISCONNECT CALL DUE TO FALL BELOW MINIMUM SPEED CONDITION");
      t30ShrdPrm.faxStat = FS_IDL;
      t30EntStat.curCmd  = AT_CMD_NONE;
      ccShrdPrm.datStat  = DS_DSC_REQ;
      cmhT30_Deactivate ();
      ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_FaxMinSpeedCond );
      return( AT_FAIL );
    }
    cmhT30_SendCaps ( srcId, FRT_DCS );
  }

/*
 *-------------------------------------------------------------------
 * check for connect message
 *-------------------------------------------------------------------
 */
    if( t30ShrdPrm.faxStat EQ FS_IDL OR t30ShrdPrm.faxStat EQ FS_DOC_TRF )
    {
      R_AT( RAT_FCS, t30EntStat.entOwn )
        ( t30NgtPrms.FCSvr,
          t30NgtPrms.FCSbr,
          t30NgtPrms.FCSwd,
          t30NgtPrms.FCSln,
          t30NgtPrms.FCSdf,
          t30NgtPrms.FCSec,
          t30NgtPrms.FCSbf,
          t30NgtPrms.FCSst,
          t30NgtPrms.FCSjp);
    }
    t30ShrdPrm.faxStat = FS_SND_DOC;
    pageSentFlg = FALSE;
    ppmPendFlg  = FALSE;
    cmhT30_StartFIT();
    TRACE_EVENT ("START DTE->DCE FAX DATA PHASE");
/*
    R_AT( RAT_CONNECT, t30EntStat.entOwn )
      ( t30EntStat.curCmd, cmhT30_GetDataRate(), t30ShrdPrm.cId+1, FALSE );
*/
  return( AT_EXCT );
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-PS (6147)         MODULE  : CMH_T30S                 |
| STATE   : code                  ROUTINE : sAT_PlusFDR              |
+--------------------------------------------------------------------+

  PURPOSE : This is the functional counterpart to the +FDR AT
            command which is responsible to receive FAX data.

*/

GLOBAL T_ACI_RETURN sAT_PlusFDR (T_ACI_CMD_SRC srcId)
{
  TRACE_FUNCTION ("sAT_PlusFDR()");
/*
 *-------------------------------------------------------------------
 * check command source
 *-------------------------------------------------------------------
 */
  if(!cmh_IsVldCmdSrc (srcId) OR
     !psaCC_ctbIsValid (t30ShrdPrm.cId) OR
     fnd_cmhPrm[srcId].t30CmdPrm.FCRval EQ FCR_VAL_NoRcvCap OR
     (t30ShrdPrm.faxStat NEQ FS_IDL AND t30ShrdPrm.faxStat NEQ FS_RCV_DOC))
  {
    ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
    return( AT_FAIL );
  }
  cmhT30_StopFIT();

/*
 *-------------------------------------------------------------------
 * check entity status
 *-------------------------------------------------------------------
 */
  if( t30EntStat.curCmd NEQ AT_CMD_NONE )
    return( AT_BUSY );

  t30EntStat.curCmd = AT_CMD_FDR;
  t30EntStat.entOwn = srcId;

/*
 *-------------------------------------------------------------------
 * check to send a DTC frame
 *-------------------------------------------------------------------
 */
  if( DTCSentFlg EQ FALSE                                    AND
      (t30ShrdPrm.faxStat EQ FS_IDL OR
       t30ShrdPrm.faxStat EQ FS_DOC_TRF)                     AND
      psaCC_ctb(t30ShrdPrm.cId)->calType EQ CT_MOC           AND
      fnd_cmhPrm[t30EntStat.entOwn].t30CmdPrm.FSPval EQ FSP_VAL_PollEnable )
  {
    DTCSentFlg = TRUE;
    cmhT30_SendCaps ( srcId, FRT_DTC );
  }

/*
 *-------------------------------------------------------------------
 * check to send a post page response
 *-------------------------------------------------------------------
 */
  else if (t30ShrdPrm.faxStat EQ FS_RCV_DOC OR t30ShrdPrm.faxStat EQ FS_DOC_TRF)
  {
    t30ShrdPrm.sgn_snd = cmhT30_GetPpr(fnd_cmhPrm[srcId].t30CmdPrm.FPSppr);
    if( psaT30_Ppm( ) < 0 )  /* send ppm */
    {
      TRACE_EVENT( "FATAL RETURN psaT30 in sAT_PlusFDR" );
      ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Internal );
      return( AT_FAIL );
    }
  }

/*
 *-------------------------------------------------------------------
 * check for connect message
 *-------------------------------------------------------------------
 */
  t30ShrdPrm.faxStat = FS_RCV_DOC;
  return( AT_EXCT );
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-PS (6147)         MODULE  : CMH_T30S                 |
| STATE   : code                  ROUTINE : sAT_PlusFKS              |
+--------------------------------------------------------------------+

  PURPOSE : This is the functional counterpart to the +FKS AT
            command which is responsible to terminate a FAX session.

*/

GLOBAL T_ACI_RETURN sAT_PlusFKS (T_ACI_CMD_SRC srcId)
{
  TRACE_FUNCTION ("sAT_PlusFKS()");

  /* check command source */
  if(!cmh_IsVldCmdSrc (srcId) )
  {
    ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
    return( AT_FAIL );
  }
  cmhT30_StopFIT();

  /* check entity status */
  if( t30EntStat.curCmd NEQ AT_CMD_NONE )
    return( AT_BUSY );

  /* check for active call */
  if (!psaCC_ctbIsValid (t30ShrdPrm.cId))
    return( AT_CMPL );

  t30EntStat.curCmd = AT_CMD_FKS;
  t30EntStat.entOwn = srcId;

  /* disconnect T30 */
  psaT30_Disconnect( );

  return( AT_EXCT );
}

/*
+-------------------------------------------------------------------+
| PROJECT : GSM-PS (6147)         MODULE  : CMH_T30                 |
|                                 ROUTINE : cmhT30_Activate         |
+-------------------------------------------------------------------+

  PURPOSE : set all nescessary parameters and activate T30

*/

GLOBAL T_ACI_RETURN cmhT30_Activate ( T_ACI_CMD_SRC srcId,
                                      T_ACI_AT_CMD cmdId,
                                      SHORT cId )
{
  TRACE_FUNCTION ("cmhT30_Activate()");

  /* check command source */
  if(!cmh_IsVldCmdSrc (srcId))
    return( AT_FAIL );

  /* check entity status */
  if( t30EntStat.curCmd NEQ AT_CMD_NONE )

    return( AT_BUSY );

  /* fill in activate parameters */
  t30ShrdPrm.trans_rate = cmhT30_SelChnRate();
  if( t30ShrdPrm.trans_rate EQ NOT_PRESENT_16BIT )
    return( AT_FAIL );

  t30ShrdPrm.bitord = cmhT30_SelBitOrder( srcId );
  if( t30ShrdPrm.bitord EQ NOT_PRESENT_8BIT )
    return( AT_FAIL );

  t30ShrdPrm.half_rate        = cmhT30_SelHlfRate();
  t30ShrdPrm.threshold        = T30_DEF_THLD;
  t30ShrdPrm.frames_per_prim  = T30_DEF_FRMPRIM;
  t30ShrdPrm.hdlc_report      = TRUE;
  t30ShrdPrm.test_mode        = 0;    /* needed for simulation */

  t30ShrdPrm.cId     = cId;
  t30EntStat.curCmd  = cmdId;
  t30EntStat.entOwn  = srcId;

  FHSstat = FHS_STAT_NormEnd;         /* reset call termination status */

  psaT30_Activate( );
  return( AT_EXCT );
}

/*
+-------------------------------------------------------------------+
| PROJECT : GSM-PS (6147)         MODULE  : CMH_T30                 |
|                                 ROUTINE : cmhT30_Deactivate       |
+-------------------------------------------------------------------+

  PURPOSE : set all nescessary parameters and deactivate T30

*/

GLOBAL T_ACI_RETURN cmhT30_Deactivate ( void )
{
  UBYTE src_id = t30EntStat.entOwn;
#ifdef FF_PSI
  T_ACI_DTI_PRC_PSI  *src_infos = find_element (psi_src_params, 
                                 src_id, cmhPSItest_srcId);
#endif /*FF_PSI*/
  T_DTI_CNTRL    info;

  TRACE_FUNCTION ("cmht30_Deactivate()");


  if (dti_cntrl_get_info_from_src_id( src_id, &info) EQ FALSE)
  {
    TRACE_EVENT_P1("cannot find info for src_id=%d", src_id);
    return( AT_FAIL );
  }

  if (dti_cntrl_is_dti_channel_connected(DTI_ENTITY_T30, info.dti_id))
  {
    T_DTI_ENTITY_ID entity_list[] = {DTI_ENTITY_ACI};
#ifdef FF_PSI
    if (src_infos NEQ NULL)
      dti_cntrl_est_dpath_indirect ( src_id,
                                   entity_list,
                                   1,
                                   SPLIT,
                                   atiPSI_dti_cb,
                                   DTI_CPBLTY_CMD,
                                   DTI_CID_NOTPRESENT);
    else
#endif
      dti_cntrl_est_dpath_indirect ( src_id,
                                   entity_list,
                                   1,
                                   SPLIT,
                                   atiUART_dti_cb,
                                   DTI_CPBLTY_CMD,
                                   DTI_CID_NOTPRESENT);

    return( AT_EXCT );
  }

  /* reset parameters to initial value */
  cmhT30_RstNgtPrms();              /* reset negotiation parameter */

  /* deactivate */
  psaT30_Deactivate( );
  return( AT_EXCT );
}

/*
+-------------------------------------------------------------------+
| PROJECT : GSM-PS (6147)         MODULE  : CMH_T30                 |
|                                 ROUTINE : cmhT30_Modify           |
+-------------------------------------------------------------------+

  PURPOSE : set all nescessary parameters and modify T30

*/

GLOBAL T_ACI_RETURN cmhT30_Modify (void)
{
  TRACE_FUNCTION ("cmhT30_Modify()");

  /* fill in modify parameters */
  t30ShrdPrm.trans_rate = cmhT30_SelUsrRate();
  if (t30ShrdPrm.trans_rate EQ NOT_PRESENT_16BIT)
  {
    t30ShrdPrm.trans_rate = cmhT30_SelChnRate();
  }
  if (t30ShrdPrm.trans_rate EQ NOT_PRESENT_16BIT)
    return (AT_FAIL);

  t30ShrdPrm.half_rate = cmhT30_SelHlfRate();

  psaT30_Modify( );
  return( AT_EXCT );
}

/*
+-------------------------------------------------------------------+
| PROJECT : GSM-PS (6147)         MODULE  : CMH_T30                 |
|                                 ROUTINE : cmhT30_SendCaps         |
+-------------------------------------------------------------------+

  PURPOSE : Send local DCE capability parameters

*/

GLOBAL T_ACI_RETURN cmhT30_SendCaps ( T_ACI_CMD_SRC srcId,
                                      T_T30_FRTP frmTyp )
{
  T_T30_CMD_PRM * pT30CmdPrm;  /* points to T30 command parameters */

  TRACE_FUNCTION ("cmhT30_SendCaps()");

/*
 *-------------------------------------------------------------------
 * check command source
 *-------------------------------------------------------------------
 */
  if(!cmh_IsVldCmdSrc (srcId))

    return( AT_FAIL );

  pT30CmdPrm = &fnd_cmhPrm[srcId].t30CmdPrm;

/*
 *-------------------------------------------------------------------
 * build capability parameter
 *-------------------------------------------------------------------
 */
  t30ShrdPrm.hdlc_snd.crp = FALSE;
  cmhT30_BuildSndFrm( srcId, frmTyp );

  switch( frmTyp )
  {
    /*
     *---------------------------------------------------------------
     * for a DIS frame
     *---------------------------------------------------------------
     */
    case( FRT_DIS ):

      t30ShrdPrm.hdlc_snd.v_dcs = t30ShrdPrm.hdlc_snd.v_dtc = FALSE;
      t30ShrdPrm.hdlc_snd.c_nsc = t30ShrdPrm.hdlc_snd.c_nss = 0;
      t30ShrdPrm.hdlc_snd.c_tsi = t30ShrdPrm.hdlc_snd.c_cig = 0;

                                          /* non-standard facility */
      t30ShrdPrm.hdlc_snd.c_nsf = pT30CmdPrm -> FNSlen;

      if (pT30CmdPrm -> FNSlen)
      {
        memcpy( t30ShrdPrm.hdlc_snd.nsf, pT30CmdPrm -> FNSoct,
                pT30CmdPrm -> FNSlen);
      }

      if( pT30CmdPrm -> FLIstr[0] NEQ 0 ) /* calling subscr. id */
      {
        t30ShrdPrm.hdlc_snd.c_csi = strlen( pT30CmdPrm -> FLIstr );
        strncpy( (char *) t30ShrdPrm.hdlc_snd.csi,
                 (char *) pT30CmdPrm -> FLIstr,
                 t30ShrdPrm.hdlc_snd.c_csi );
      }
      else
      {
        t30ShrdPrm.hdlc_snd.c_csi = 0;
      }
      break;

    /*
     *---------------------------------------------------------------
     * for a DTC frame
     *---------------------------------------------------------------
     */
    case( FRT_DTC ):

      t30ShrdPrm.hdlc_snd.v_dcs = t30ShrdPrm.hdlc_snd.v_dis = FALSE;
      t30ShrdPrm.hdlc_snd.c_nsf = t30ShrdPrm.hdlc_snd.c_nss = 0;
      t30ShrdPrm.hdlc_snd.c_tsi = t30ShrdPrm.hdlc_snd.c_csi = 0;

                                          /* non-standard facility */
      t30ShrdPrm.hdlc_snd.c_nsc = pT30CmdPrm -> FNSlen;

      if (pT30CmdPrm -> FNSlen)
      {
        memcpy( t30ShrdPrm.hdlc_snd.nsc, pT30CmdPrm -> FNSoct,
                pT30CmdPrm -> FNSlen);
      }

      if( pT30CmdPrm -> FPWpwd[0] NEQ 0 )     /* password string */
      {
        t30ShrdPrm.hdlc_snd.c_pwd = strlen( pT30CmdPrm -> FPWpwd );
        strncpy( (char *) t30ShrdPrm.hdlc_snd.pwd,
                 (char *) pT30CmdPrm -> FPWpwd,
                 t30ShrdPrm.hdlc_snd.c_pwd );
      }
      else
      {
        t30ShrdPrm.hdlc_snd.c_pwd = 0;
      }

      if( pT30CmdPrm -> FPAsep[0] NEQ 0 )     /* selective polling string */
      {
        t30ShrdPrm.hdlc_snd.c_sep = strlen( pT30CmdPrm -> FPAsep );
        strncpy( (char *) t30ShrdPrm.hdlc_snd.sep,
                 (char *) pT30CmdPrm -> FPAsep,
                 t30ShrdPrm.hdlc_snd.c_sep );
      }
      else
      {
        t30ShrdPrm.hdlc_snd.c_sep = 0;
      }

      if( pT30CmdPrm -> FPIstr[0] NEQ 0 ) /* calling subscr. id */
      {
        t30ShrdPrm.hdlc_snd.c_cig = strlen( pT30CmdPrm -> FPIstr );
        strncpy( (char *) t30ShrdPrm.hdlc_snd.cig,
                 (char *) pT30CmdPrm -> FPIstr,
                 t30ShrdPrm.hdlc_snd.c_cig );
      }
      else
      {
        t30ShrdPrm.hdlc_snd.c_cig = 0;
      }
      break;

    /*
     *---------------------------------------------------------------
     * for a DCS frame
     *---------------------------------------------------------------
     */
    case( FRT_DCS ):

      t30ShrdPrm.hdlc_snd.v_dis = t30ShrdPrm.hdlc_snd.v_dtc = FALSE;
      t30ShrdPrm.hdlc_snd.c_nsc = t30ShrdPrm.hdlc_snd.c_nsf = 0;
      t30ShrdPrm.hdlc_snd.c_csi = t30ShrdPrm.hdlc_snd.c_cig = 0;

                                          /* non-standard facility */
      t30ShrdPrm.hdlc_snd.c_nss = pT30CmdPrm -> FNSlen;

      if (pT30CmdPrm -> FNSlen)
      {
        memcpy( t30ShrdPrm.hdlc_snd.nss, pT30CmdPrm -> FNSoct,
              pT30CmdPrm -> FNSlen);
      }

      if( pT30CmdPrm -> FPWpwd[0] NEQ 0 )     /* password string */
      {
        t30ShrdPrm.hdlc_snd.c_pwd = strlen( pT30CmdPrm -> FPWpwd );
        strncpy( (char *) t30ShrdPrm.hdlc_snd.pwd,
                 (char *) pT30CmdPrm -> FPWpwd,
                 t30ShrdPrm.hdlc_snd.c_pwd );
      }
      else
      {
        t30ShrdPrm.hdlc_snd.c_pwd = 0;
      }

      if( pT30CmdPrm -> FSAsub[0] NEQ 0 )     /* subaddress string */
      {
        t30ShrdPrm.hdlc_snd.c_sub = strlen( pT30CmdPrm -> FSAsub );
        strncpy( (char *) t30ShrdPrm.hdlc_snd.sub,
                 (char *) pT30CmdPrm -> FSAsub,
                 t30ShrdPrm.hdlc_snd.c_sub );
      }
      else
      {
        t30ShrdPrm.hdlc_snd.c_sub = 0;
      }

      if( pT30CmdPrm -> FLIstr[0] NEQ 0 ) /* transmitting subscr. id */
      {
        t30ShrdPrm.hdlc_snd.c_tsi = strlen( pT30CmdPrm -> FLIstr );
        strncpy( (char *) t30ShrdPrm.hdlc_snd.tsi,
                 (char *) pT30CmdPrm -> FLIstr,
                 t30ShrdPrm.hdlc_snd.c_tsi );
      }
      else
      {
        t30ShrdPrm.hdlc_snd.c_tsi = 0;
      }
      break;
  }

/*
 *-------------------------------------------------------------------
 * send capability parameter
 *-------------------------------------------------------------------
 */
  psaT30_Capabilities( );

/*
 *-------------------------------------------------------------------
 * check for T30 modification
 *-------------------------------------------------------------------
 */
  if( frmTyp EQ FRT_DCS )
  {
    if( cmhT30_Chk4TCHAdpt() )
    {
      ccShrdPrm.datStat = DS_TCH_MDF; /* wait for TCH change */
    }
    else
    {
      if( cmhT30_Modify() NEQ AT_EXCT )
      {
        ccShrdPrm.datStat = DS_DSC_REQ;
        cmhT30_Deactivate();
      }
    }
  }
  return( AT_EXCT );
}


/*
+-------------------------------------------------------------------+
| PROJECT : GSM-PS (6147)    MODULE  : CMH_T30S                     |
|                            ROUTINE : cmhT30_PPMRcvd               |
+-------------------------------------------------------------------+

  PURPOSE : post page message was received

*/
/* does not seem to be called */
#if 0
GLOBAL void cmhT30_PPMRcvd ( UBYTE ppm )
{
  TRACE_FUNCTION ("cmhT30_PPMRcvd()");

  /* determine type of post page message */
  switch( ppm )
  {
    case( SGN_MPS ):                    /* multi-page signal */
    case( SGN_EOP ):                    /* end of procedure */

      t30ShrdPrm.faxStat = FS_SND_DOC;  /* stay in send document */
      break;

    case( SGN_EOM ):

      /*--- no more doc available for polling if polled ---*/
      if( ccShrdPrm.ctb[t30ShrdPrm.cId].calType EQ CT_MTC )
      {
        fnd_cmhPrm[t30EntStat.entOwn].t30CmdPrm.FLPval = FLP_VAL_NoPollDoc;
      }

      t30ShrdPrm.faxStat = FS_DOC_TRF;  /* switch to document transfered */
      break;

    default:

      return;
  }

  /* send PPM to T.30 */
  t30ShrdPrm.sgn_snd = ppm;

  if( PRIRcvdFlg AND
      fnd_cmhPrm[t30EntStat.entOwn].t30CmdPrm.FIEval EQ FIE_VAL_AcceptPRI)

      t30ShrdPrm.sgn_snd |= PRI_MRK;

  if( pageSentFlg EQ TRUE )
  {
    if( psaT30_Ppm( ) < 0 )  /* T30 PPM request */
    {
      TRACE_EVENT( "FATAL RETURN psaT30 in cmhT30_PPMRcvd" );
    }
  }
  else

    ppmPendFlg = TRUE;
}
#endif /* 0 */

/*
+-------------------------------------------------------------------+
| PROJECT : GSM-PS (6147)    MODULE  : CMH_T30S                     |
|                            ROUTINE : cmhT30_PRIRcvd               |
+-------------------------------------------------------------------+

  PURPOSE : procedure interrupt message was received

*/

GLOBAL void cmhT30_PRIRcvd ( void )
{
  TRACE_FUNCTION ("cmhT30_PRIRcvd()");

  PRIRcvdFlg = TRUE;
}

/*
+-------------------------------------------------------------------+
| PROJECT : GSM-PS (6147)         MODULE  : CMH_T30                 |
|                                 ROUTINE : cmhT30_FITTimeout       |
+-------------------------------------------------------------------+

  PURPOSE : handle FAX inactivity timeout

*/

GLOBAL void cmhT30_FITTimeout ( void )
{
  TRACE_FUNCTION( "cmhT30_FITTimeout()" );

  if (!psaCC_ctbIsValid (t30ShrdPrm.cId))
  {
    TRACE_ERROR ("t30ShrdPrm.cId invalid");
    return;
  }

/*
 *-------------------------------------------------------------------
 * notify CC  to release the call
 *-------------------------------------------------------------------
 */
  t30ShrdPrm.faxStat = FS_IDL;
  t30EntStat.curCmd  = AT_CMD_NONE;

  cmhCC_T30_Failed();

  if( fnd_cmhPrm[t30EntStat.entOwn].t30CmdPrm.FITact EQ FIT_ACT_OnHookRst )

    fnd_cmhPrm[t30EntStat.entOwn].t30CmdPrm.FCLASSclass = FCLASS_CLASS_Data;
}
#endif /* DTI OR FF_FAX*/
/*==== EOF ========================================================*/