FreeCalypso > hg > fc-magnetite
view src/g23m-gsm/rr/cnf_rr.h @ 662:8cd8fd15a095
SIM speed enhancement re-enabled and made configurable
TI's original code supported SIM speed enhancement, but Openmoko had it
disabled, and OM's disabling of speed enhancement somehow caused certain
SIM cards to start working which didn't work before (OM's bug #666).
Because our FC community is much smaller in year 2020 than OM's community
was in their day, we are not able to find one of those #666-affected SIMs,
thus the real issue they had encountered remains elusive. Thus our
solution is to re-enable SIM speed enhancement and simply wait for if
and when someone runs into a #666-affected SIM once again. We provide
a SIM_allow_speed_enhancement global variable that allows SIM speed
enhancement to be enabled or disabled per session, and an /etc/SIM_spenh
file in FFS that allows it to enabled or disabled on a non-volatile
basis. SIM speed enhancement is now enabled by default.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Sun, 24 May 2020 05:02:28 +0000 |
parents | 27a4235405c6 |
children |
line wrap: on
line source
/* +----------------------------------------------------------------------------- | Project : | Modul : +----------------------------------------------------------------------------- | Copyright 2002 Texas Instruments Berlin, AG | All rights reserved. | | This file is confidential and a trade secret of Texas | Instruments Berlin, AG | The receipt of or possession of this file does not convey | any rights to reproduce or disclose its contents or to | manufacture, use, or sell anything it may describe, in | whole, or in part, without the specific written consent of | Texas Instruments Berlin, AG. +----------------------------------------------------------------------------- | Purpose : Dynamic Configuration for Radio Resource +----------------------------------------------------------------------------- */ #ifndef CNF_RR_H #define CNF_RR_H /*==== CONSTANTS ==================================================*/ /* * CONFIGURATION PARAMETER * * Description : The constants define the commands for dynamic * configuration proposals. */ #define RR_TIMER_SET "TIMER_SET" #define RR_TIMER_RESET "TIMER_RESET" #define RR_TIMER_SPEED_UP "TIMER_SPEED_UP" #define RR_TIMER_SLOW_DOWN "TIMER_SLOW_DOWN" #define RR_TIMER_SUPPRESS "TIMER_SUPPRESS" #define RR_NO_SYS_TIME "NO_SYS_TIME" #define RR_SET_LAST_USED_SC "SET_LAST_USED_SC" #define RR_INIT_FFS "INIT_FFS" #define RR_WRITE_FFS "WRITE_FFS" #define RR_FCR "FCR" #define RR_IHO "IHO" #define RR_SCR "SCR" #define RR_DLE "DLE" #define RR_FCA "FCA" #define RR_FRL "FRL" #define RR_FHO "FHO" #define RR_GSM_OFFSET "GSM_OFFSET" #define RR_DCS_OFFSET "DCS_OFFSET" #define RR_CTO "CTO" #define RR_NKC "NKC" #define RR_MT_CALL_NAME "MTC" #define RR_MT_SMS_0_NAME "MT_SMS_0" #define RR_MT_SMS_2_NAME "MT_SMS_2" #define RR_SRV_FULL_NAME "FULL_SERVICE" #define RR_SRV_LIM_NAME "LIMITED_SERVICE" #define RR_SRV_NO "NO_SERVICE" #define RR_PSEUDO_SYNC_HO "PSEUDO_SYNC_HO" #define RR_PCM "PCM" #define RR_DCS_PCLASS_3 "DCS_PCLASS_3" #define RR_RESTRICTED_BAND "SET_BAND" #define RR_MULTISLOT_CLASS "MULTISLOT_CLASS" #define RR_CMSP "CMSP" #define RR_ERASE_BL "ERASE_BL" #define RR_ERASE_WL "ERASE_WL" #define RR_SET_WL "SET_WL" #define RR_SET_WL_PLMN "SET_WL_PLMN" #define RR_SET_BL "SET_BL" #define RR_SET_WL_REGION "SET_WL_REGION" #define RR_SHOW_BL "SHOW_BL" #define RR_SHOW_WL "SHOW_WL" #define RR_SET_NPS_DELAY "SET_NPS_DELAY" #if defined(_TARGET_) #define RR_FFS_CHECK "FFS_CHECK" #endif /* _TARGET_ */ #define RR_SCS "SCS" #define RR_SHIELD "SHIELD" #define RR_BL_CS "BL_CS" #define RR_U_RXT "U_RXT" #define RR_M_RXT "M_RXT" #define RR_L_RXT "L_RXT" #define RR_TFAST_CS "TIM_FAST" #define RR_TNORMAL_CS "TIM_NORMAL" #define RR_FBLS "FBLS" /*==== TYPES ======================================================*/ /*==== EXPORT =====================================================*/ #endif