view src/gpf2/inc/gdi.h @ 662:8cd8fd15a095

SIM speed enhancement re-enabled and made configurable TI's original code supported SIM speed enhancement, but Openmoko had it disabled, and OM's disabling of speed enhancement somehow caused certain SIM cards to start working which didn't work before (OM's bug #666). Because our FC community is much smaller in year 2020 than OM's community was in their day, we are not able to find one of those #666-affected SIMs, thus the real issue they had encountered remains elusive. Thus our solution is to re-enable SIM speed enhancement and simply wait for if and when someone runs into a #666-affected SIM once again. We provide a SIM_allow_speed_enhancement global variable that allows SIM speed enhancement to be enabled or disabled per session, and an /etc/SIM_spenh file in FFS that allows it to enabled or disabled on a non-volatile basis. SIM speed enhancement is now enabled by default.
author Mychaela Falconia <falcon@freecalypso.org>
date Sun, 24 May 2020 05:02:28 +0000
parents 864b8cc0cf63
children
line wrap: on
line source

/*
+------------------------------------------------------------------------------
|  File:       gdi.h
+------------------------------------------------------------------------------
|                 Copyright Condat AG 1999-2001, Berlin
|                 All rights reserved.
|
|                 This file is confidential and a trade secret of Condat AG.
|                 The receipt of or possession of this file does not convey
|                 any rights to reproduce or disclose its contents or to
|                 manufacture, use, or sell anything it may describe, in
|                 whole, or in part, without the specific written consent of
|                 Condat AG.
+------------------------------------------------------------------------------
| Purpose:    General Definitions.
| $Identity:$
+------------------------------------------------------------------------------
*/

#ifndef  GDI_H
#define  GDI_H

/*==== INCLUDES =============================================================*/

#include "typedefs.h"

/*==== DEFINITIONS ==========================================================*/
/*--------------------------------
   Return values
  --------------------------------*/
#ifdef DRV_OK
 #undef DRV_OK
#endif
#define DRV_OK                   0
#define DRV_BUFFER_FULL          1
#define DRV_DISABLED             2
#define DRV_ENABLED              3
#define DRV_INITFAILURE          4
#define DRV_INITIALIZED          5
#define DRV_INTERNAL_ERROR       6
#define DRV_INPROCESS            7
#define DRV_INVALID_PARAMS       8
#define DRV_NOTCONFIGURED        9
#define DRV_RETVAL_USER          50

/*--------------------------------
   Signal types
  --------------------------------*/
#define DRV_SIGFCT_NOTAVAILABLE  0x01
#define DRV_SIGTYPE_CLEAR        0x02
#define DRV_SIGTYPE_FLUSH        0x04
#define DRV_SIGTYPE_READ         0x08
#define DRV_SIGTYPE_WRITE        0x10
#define DRV_SIGTYPE_CONNECT      0x20
#define DRV_SIGTYPE_DISCONNECT   0x40

#define DRV_SIGTYPE_USER         0x80

/*--------------------------------
   Flags
  --------------------------------*/
#define CALLED_FROM_ISR          0x01

/*--------------------------------
   Buffer Types
  --------------------------------*/
#define DRV_BUFTYPE_READ         0x01
#define DRV_BUFTYPE_WRITE        0x02

/*==== TYPES ================================================================*/
typedef void * drv_ProcHandle_Type;

/*------------------------------------------------------------------------
   T_DRV_SIGNAL - driver signal identification
 
   The type defines the signal information data used to identify a signal. 
   This data type is used to define and to report a signal. A signal is 
   defined by a process calling the driver function drv_SetSignal. An 
   event is signalled by driver by calling the pre-defined signal call-
   back function.
  -------------------------------------------------------------------------*/
typedef struct
{
  USHORT              SignalType;
  USHORT              DrvHandle;
  ULONG               DataLength;
  T_VOID_STRUCT       *UserData;
} T_DRV_SIGNAL;

/*------------------------------------------------------------------------
   T_DRV_CB_FUNC - driver signal device control block
  
   This type defines a call-back function used to signal driver events,
   e.g. driver is ready to accept data. The driver calls the signal
   call-back function when a specific event occurs and the driver has
   been instructed to signal the event to a specific process. A process
   can set or reset event signalling by calling one of the driver 
   functions drv_SetSignal or drv_ResetSignal. Event signalling can only
   be performed when a call-back function has been installed at driver
   initialization.
  -------------------------------------------------------------------------*/
typedef void (*T_DRV_CB_FUNC ) (T_DRV_SIGNAL * Signal);

struct _T_DRV_EXPORT;

typedef struct
{
#ifdef _TOOLS_
  USHORT (*drv_Init)(USHORT,T_DRV_CB_FUNC,struct _T_DRV_EXPORT const**);
#endif
  void (*drv_Exit)(void);
  USHORT (*drv_Read)(void*, ULONG*);
  USHORT (*drv_Write)(void*, ULONG*);
  USHORT (*drv_Look)(void*, ULONG*);
  USHORT (*drv_Clear)(USHORT);
  USHORT (*drv_Flush)(void);
  USHORT (*drv_SetSignal)(USHORT);
  USHORT (*drv_ResetSignal)(USHORT);
  USHORT (*drv_SetConfig)(char*);
  USHORT (*drv_GetConfig)(char*);
  void (*drv_Callback)(T_DRV_SIGNAL*);
} T_DRV_FUNC;

typedef struct _T_DRV_EXPORT 
{
  const char    *Name;
  USHORT   	    Flags;             /* Bit (0): CALLED_BY_ISR */
  T_DRV_FUNC DrvFunc;
} T_DRV_EXPORT;


typedef struct
{
  char const *Name;
  USHORT (*drv_Init)(USHORT, T_DRV_CB_FUNC, T_DRV_EXPORT const **);
  char const *Process;
  void const *DrvConfig;
} T_DRV_LIST_ENTRY;

typedef struct
{
  T_DRV_LIST_ENTRY DrvEntry [ 5 ];
} T_DRV_LIST;

/*==== END OF FILE ==========================================================*/
#endif