FreeCalypso > hg > fc-magnetite

view cdg-hybrid/cdginc/p_gsim.val @ 600:8f50b202e81f

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
board preprocessor conditionals: prep for more FC hw in the future This change eliminates the CONFIG_TARGET_FCDEV3B preprocessor symbol and all preprocessor conditionals throughout the code base that tested for it, replacing them with CONFIG_TARGET_FCFAM or CONFIG_TARGET_FCMODEM. These new symbols are specified as follows: CONFIG_TARGET_FCFAM is intended to cover all hardware designs created by Mother Mychaela under the FreeCalypso trademark. This family will include modem products (repackagings of the FCDEV3B, possibly with RFFE or even RF transceiver changes), and also my desired FreeCalypso handset product. CONFIG_TARGET_FCMODEM is intended to cover all FreeCalypso modem products (which will be firmware-compatible with the FCDEV3B if they use TI Rita transceiver, or will require a different fw build if we switch to one of Silabs Aero transceivers), but not the handset product. Right now this CONFIG_TARGET_FCMODEM preprocessor symbol is used to conditionalize everything dealing with MCSI. At the present moment the future of FC hardware evolution is still unknown: it is not known whether we will ever have any beyond-FCDEV3B hardware at all (contingent on uncertain funding), and if we do produce further FC hardware designs, it is not known whether they will retain the same FIC modem core (triband), if we are going to have a quadband design that still retains the classic Rita transceiver, or if we are going to switch to Silabs Aero II or some other transceiver. If we produce a quadband modem that still uses Rita, it will run exactly the same fw as the FCDEV3B thanks to the way we define TSPACT signals for the RF_FAM=12 && CONFIG_TARGET_FCFAM combination, and the current fcdev3b build target will be renamed to fcmodem. OTOH, if that putative quadband modem will be Aero-based, then it will require a different fw build target, the fcdev3b target will stay as it is, and the two targets will both define CONFIG_TARGET_FCFAM and CONFIG_TARGET_FCMODEM, but will have different RF_FAM numbers. But no matter which way we are going to evolve, it is not right to have conditionals on CONFIG_TARGET_FCDEV3B in places like ACI, and the present change clears the way for future evolution.
author Mychaela Falconia <falcon@freecalypso.org>
date Mon, 01 Apr 2019 01:05:24 +0000
parents e7a67accfad9
children
line wrap: on
line source

/*
+--------------------------------------------------------------------------+
| PROJECT : PROTOCOL STACK                                                 |
| FILE    : p_gsim.val                                                     |
| SOURCE  : "sap\gsim.pdf"                                                 |
| LastModified : "2003-02-04"                                              |
| IdAndVersion : "8441.113.99.004"                                         |
| SrcFileTime  : "Thu Nov 29 09:43:12 2007"                                |
| Generated by CCDGEN_2.5.5A on Fri Oct 14 21:41:52 2016                   |
|           !!DO NOT MODIFY!!DO NOT MODIFY!!DO NOT MODIFY!!                |
+--------------------------------------------------------------------------+
*/

/* PRAGMAS
 * PREFIX                 : NONE
 * COMPATIBILITY_DEFINES  : NO (require PREFIX)
 * ALWAYS_ENUM_IN_VAL_FILE: NO
 * ENABLE_GROUP: NO
 * CAPITALIZE_TYPENAME: NO
 */


#ifndef P_GSIM_VAL
#define P_GSIM_VAL


#define CDG_ENTER__P_GSIM_VAL

#define CDG_ENTER__FILENAME _P_GSIM_VAL
#define CDG_ENTER__P_GSIM_VAL__FILE_TYPE CDGINC
#define CDG_ENTER__P_GSIM_VAL__LAST_MODIFIED _2003_02_04
#define CDG_ENTER__P_GSIM_VAL__ID_AND_VERSION _8441_113_99_004

#define CDG_ENTER__P_GSIM_VAL__SRC_FILE_TIME _Thu_Nov_29_09_43_12_2007

#include "CDG_ENTER.h"

#undef CDG_ENTER__P_GSIM_VAL

#undef CDG_ENTER__FILENAME


/*
 * Value constants for VAL_gu
 */
#define GSIM_GU_NA                     (0x0)      /* GPRS update status not applicable (i.e. this parameter shall be ignored) */
#define GSIM_GU1_UPDATED               (0x1)      /* last GPRS attach or RAU attempt successful */
#define GSIM_GU2_NOT_UPDATED           (0x2)      /* last GPRS attach or RAU attempt failed procedurally */
#define GSIM_GU3_ROAMING_NOT_ALLOWED   (0x3)      /* last GPRS attach or RAU attempt correctly performed, but negative answer from network received */

/*
 * Value constants for VAL_tmsi
 */
#define GSIM_TMSI_INVALID              (0xffffffff)/* P-TMSI invalid (see GSM 3.03)  */

/*
 * Value constants for VAL_ptmsi_signature_flag
 */
#define GSIM_PTMSI_SIG_DEL             (0x0)      /* P-TMSI Dignature shall be deleted */
#define GSIM_PTMSI_SIG_VALID           (0x1)      /* P-TMSI Signature is valid      */
#define GSIM_PTMSI_SIG_NA              (0x2)      /* P-TMSI Signature not applicable (i.e. this parameter shall be ignored) */

/*
 * Value constants for VAL_gsim_cksn
 */
#define GSIM_CKSN_NA                   (0x0)      /* GPRS ciphering key sequence number not applicable (i.e. this parameter shall be ignored) */

/*
 * Value constants for VAL_sim_gprs_invalid
 */
#define GSIM_SIM_GPRS_NA               (0x0)      /* not applicable (i.e. this parameter shall be ignored) */
#define GSIM_SIM_GPRS_VALID            (0x1)      /* SIM is considered as valid for GPRS */
#define GSIM_SIM_GPRS_INVALID          (0x2)      /* SIM is considered as invalid for GPRS */

/*
 * user defined constants
 */
#define GSIM_PTMSI_NA                  (0xffffffff)
#define SIZE_SRES                      (0x4)      
#define SIZE_KC                        (0x8)      
#define SIZE_RAND                      (0x10)     
#define MAX_IMSI                       (0x9)      

#include "CDG_LEAVE.h"


#endif