view cdg-hybrid/cdginc/p_ppp.val @ 600:8f50b202e81f

board preprocessor conditionals: prep for more FC hw in the future This change eliminates the CONFIG_TARGET_FCDEV3B preprocessor symbol and all preprocessor conditionals throughout the code base that tested for it, replacing them with CONFIG_TARGET_FCFAM or CONFIG_TARGET_FCMODEM. These new symbols are specified as follows: CONFIG_TARGET_FCFAM is intended to cover all hardware designs created by Mother Mychaela under the FreeCalypso trademark. This family will include modem products (repackagings of the FCDEV3B, possibly with RFFE or even RF transceiver changes), and also my desired FreeCalypso handset product. CONFIG_TARGET_FCMODEM is intended to cover all FreeCalypso modem products (which will be firmware-compatible with the FCDEV3B if they use TI Rita transceiver, or will require a different fw build if we switch to one of Silabs Aero transceivers), but not the handset product. Right now this CONFIG_TARGET_FCMODEM preprocessor symbol is used to conditionalize everything dealing with MCSI. At the present moment the future of FC hardware evolution is still unknown: it is not known whether we will ever have any beyond-FCDEV3B hardware at all (contingent on uncertain funding), and if we do produce further FC hardware designs, it is not known whether they will retain the same FIC modem core (triband), if we are going to have a quadband design that still retains the classic Rita transceiver, or if we are going to switch to Silabs Aero II or some other transceiver. If we produce a quadband modem that still uses Rita, it will run exactly the same fw as the FCDEV3B thanks to the way we define TSPACT signals for the RF_FAM=12 && CONFIG_TARGET_FCFAM combination, and the current fcdev3b build target will be renamed to fcmodem. OTOH, if that putative quadband modem will be Aero-based, then it will require a different fw build target, the fcdev3b target will stay as it is, and the two targets will both define CONFIG_TARGET_FCFAM and CONFIG_TARGET_FCMODEM, but will have different RF_FAM numbers. But no matter which way we are going to evolve, it is not right to have conditionals on CONFIG_TARGET_FCDEV3B in places like ACI, and the present change clears the way for future evolution.
author Mychaela Falconia <falcon@freecalypso.org>
date Mon, 01 Apr 2019 01:05:24 +0000
parents e7a67accfad9
children
line wrap: on
line source

/*
+--------------------------------------------------------------------------+
| PROJECT : PROTOCOL STACK                                                 |
| FILE    : p_ppp.val                                                      |
| SOURCE  : "sap\ppp.pdf"                                                  |
| LastModified : "2002-10-21"                                              |
| IdAndVersion : "8441.116.99.016"                                         |
| SrcFileTime  : "Thu Nov 29 09:51:00 2007"                                |
| Generated by CCDGEN_2.5.5A on Fri Oct 14 21:41:52 2016                   |
|           !!DO NOT MODIFY!!DO NOT MODIFY!!DO NOT MODIFY!!                |
+--------------------------------------------------------------------------+
*/

/* PRAGMAS
 * PREFIX                 : NONE
 * COMPATIBILITY_DEFINES  : NO (require PREFIX)
 * ALWAYS_ENUM_IN_VAL_FILE: NO
 * ENABLE_GROUP: NO
 * CAPITALIZE_TYPENAME: NO
 */


#ifndef P_PPP_VAL
#define P_PPP_VAL


#define CDG_ENTER__P_PPP_VAL

#define CDG_ENTER__FILENAME _P_PPP_VAL
#define CDG_ENTER__P_PPP_VAL__FILE_TYPE CDGINC
#define CDG_ENTER__P_PPP_VAL__LAST_MODIFIED _2002_10_21
#define CDG_ENTER__P_PPP_VAL__ID_AND_VERSION _8441_116_99_016

#define CDG_ENTER__P_PPP_VAL__SRC_FILE_TIME _Thu_Nov_29_09_51_00_2007

#include "CDG_ENTER.h"

#undef CDG_ENTER__P_PPP_VAL

#undef CDG_ENTER__FILENAME


/*
 * Value constants for VAL_mru
 */
#define PPP_MRU_DEFAULT                (0x5dc)    /* default value for mru          */

/*
 * Value constants for VAL_ap
 */
#define PPP_AP_NO                      (0x0)      /* no authentication              */
#define PPP_AP_PAP                     (0x1)      /* password authentication protocol */
#define PPP_AP_CHAP                    (0x2)      /* challenge handshake authentication protocol */
#define PPP_AP_AUTO                    (0x3)      /* automatic authentication       */

/*
 * Value constants for VAL_accm
 */
#define PPP_ACCM_DEFAULT               (0xffffffff)/* default value for accm         */
#define PPP_ACCM_OFF                   (0x0)      /* disable control character mapping */

/*
 * Value constants for VAL_rt
 */
#define PPP_RT_DEFAULT                 (0x3)      /* default value for restart timer */

/*
 * Value constants for VAL_mc
 */
#define PPP_MC_DEFAULT                 (0xa)      /* default value for max configure */

/*
 * Value constants for VAL_mt
 */
#define PPP_MT_DEFAULT                 (0x2)      /* default value for max terminate */

/*
 * Value constants for VAL_mf
 */
#define PPP_MF_DEFAULT                 (0x5)      /* default value for max failure  */

/*
 * Value constants for VAL_ppp_cause
 */
#define PPP_TERM_OK_MMI                (0xcf01)   /* successful terminated (MMI initiated) */
#define PPP_TERM_OK_PEER               (0xcf02)   /* successful terminated (PPP peer initiated) */
#define PPP_TERM_NO_RESPONSE           (0xcf03)   /* no response from the PPP peer  */
#define PPP_TERM_LOOP_BACK             (0xcf04)   /* looped-back link detected      */
#define PPP_TERM_LCP_NOT_CONVERGE      (0xcf05)   /* LCP configuration is not converging */
#define PPP_TERM_IPCP_NOT_CONVERGE     (0xcf06)   /* IPCP configuration is not converging */
#define PPP_TERM_IPCP_NOT_STARTED      (0xcf07)   /* PPP peer did not start IPCP configuration */
#define PPP_TERM_NO_CHANNEL            (0xcf08)   /* can not open communication channels */
#define PPP_TERM_PROT_REJ_UNEXPECTED   (0xcf09)   /* unexpected Protocol Rejection from PPP peer */
#define PPP_TERM_USE_AUTHED_FAILED     (0xcf0a)   /* user authentication failed     */
#define PPP_TERM_PROT_ERROR_UNSPEC     (0xcf0b)   /* unspecified protocol error     */

/*
 * Value constants for VAL_ppp_hc
 */
#define PPP_HC_OFF                     (0x0)      /* no header compression          */
#define PPP_HC_VJ                      (0x1)      /* Van Jacobson header compression */

/*
 * Value constants for VAL_ip
 */
#define PPP_IP_DYNAMIC                 (0x0)      /* dynaminc IP address negotiation */

/*
 * Value constants for VAL_dns1
 */
#define PPP_DNS1_DYNAMIC               (0x0)      /* dynaminc primary DNS server address negotiation */

/*
 * Value constants for VAL_dns2
 */
#define PPP_DNS2_DYNAMIC               (0x0)      /* dynaminc secondary DNS server address negotiation */

/*
 * Value constants for VAL_mode
 */
#define PPP_CLIENT                     (0x0)      /* start PPP as client            */
#define PPP_SERVER                     (0x1)      /* start PPP as server            */
#define PPP_TRANSPARENT                (0x2)      /* start PPP in transparent mode  */

/*
 * Value constants for VAL_lower_layer
 */
#define PPP_LOWER_LAYER_DOWN           (0x0)      /* lower layer is not available   */
#define PPP_LOWER_LAYER_UP             (0x1)      /* lower layer is available       */

/*
 * Value constants for VAL_connected_direction
 */
#define PPP_DTI_CONN_PEER              (0x0)      /* DTI channel is connected to Peer Layer */
#define PPP_DTI_CONN_PROT              (0x1)      /* DTI channel is connected to Protocol Layer */

/*
 * user defined constants
 */
#define PPP_LOGIN_NAME_LENGTH          (0x21)     
#define PPP_PASSWORD_LENGTH            (0x19)     
#define PPP_ORIGINATING_ENTITY         (0xf)      

#include "CDG_LEAVE.h"


#endif