FreeCalypso > hg > fc-magnetite
view cdg-hybrid/cdginc/p_rrlc.val @ 600:8f50b202e81f
board preprocessor conditionals: prep for more FC hw in the future
This change eliminates the CONFIG_TARGET_FCDEV3B preprocessor symbol and
all preprocessor conditionals throughout the code base that tested for it,
replacing them with CONFIG_TARGET_FCFAM or CONFIG_TARGET_FCMODEM. These
new symbols are specified as follows:
CONFIG_TARGET_FCFAM is intended to cover all hardware designs created by
Mother Mychaela under the FreeCalypso trademark. This family will include
modem products (repackagings of the FCDEV3B, possibly with RFFE or even
RF transceiver changes), and also my desired FreeCalypso handset product.
CONFIG_TARGET_FCMODEM is intended to cover all FreeCalypso modem products
(which will be firmware-compatible with the FCDEV3B if they use TI Rita
transceiver, or will require a different fw build if we switch to one of
Silabs Aero transceivers), but not the handset product. Right now this
CONFIG_TARGET_FCMODEM preprocessor symbol is used to conditionalize
everything dealing with MCSI.
At the present moment the future of FC hardware evolution is still unknown:
it is not known whether we will ever have any beyond-FCDEV3B hardware at all
(contingent on uncertain funding), and if we do produce further FC hardware
designs, it is not known whether they will retain the same FIC modem core
(triband), if we are going to have a quadband design that still retains the
classic Rita transceiver, or if we are going to switch to Silabs Aero II
or some other transceiver. If we produce a quadband modem that still uses
Rita, it will run exactly the same fw as the FCDEV3B thanks to the way we
define TSPACT signals for the RF_FAM=12 && CONFIG_TARGET_FCFAM combination,
and the current fcdev3b build target will be renamed to fcmodem. OTOH, if
that putative quadband modem will be Aero-based, then it will require a
different fw build target, the fcdev3b target will stay as it is, and the
two targets will both define CONFIG_TARGET_FCFAM and CONFIG_TARGET_FCMODEM,
but will have different RF_FAM numbers. But no matter which way we are
going to evolve, it is not right to have conditionals on CONFIG_TARGET_FCDEV3B
in places like ACI, and the present change clears the way for future
evolution.
| author | Mychaela Falconia <falcon@freecalypso.org> |
|---|---|
| date | Mon, 01 Apr 2019 01:05:24 +0000 |
| parents | e7a67accfad9 |
| children |
line wrap: on
line source
/* +--------------------------------------------------------------------------+ | PROJECT : PROTOCOL STACK | | FILE : p_rrlc.val | | SOURCE : "sap\rrlc.pdf" | | LastModified : "2002-10-11" | | IdAndVersion : "8443.101.02.008" | | SrcFileTime : "Thu Nov 29 09:52:52 2007" | | Generated by CCDGEN_2.5.5A on Fri Oct 14 21:41:52 2016 | | !!DO NOT MODIFY!!DO NOT MODIFY!!DO NOT MODIFY!! | +--------------------------------------------------------------------------+ */ /* PRAGMAS * PREFIX : NONE * COMPATIBILITY_DEFINES : NO (require PREFIX) * ALWAYS_ENUM_IN_VAL_FILE: NO * ENABLE_GROUP: NO * CAPITALIZE_TYPENAME: NO */ #ifndef P_RRLC_VAL #define P_RRLC_VAL #define CDG_ENTER__P_RRLC_VAL #define CDG_ENTER__FILENAME _P_RRLC_VAL #define CDG_ENTER__P_RRLC_VAL__FILE_TYPE CDGINC #define CDG_ENTER__P_RRLC_VAL__LAST_MODIFIED _2002_10_11 #define CDG_ENTER__P_RRLC_VAL__ID_AND_VERSION _8443_101_02_008 #define CDG_ENTER__P_RRLC_VAL__SRC_FILE_TIME _Thu_Nov_29_09_52_52_2007 #include "CDG_ENTER.h" #undef CDG_ENTER__P_RRLC_VAL #undef CDG_ENTER__FILENAME /* * Value constants for VAL_cause */ #define LCS_OK (0x0) /* no error */ #define LCS_WRONG_BTS (0xa) /* Serving Cell BTS differs from Reference BTS */ #define LCS_HANDOVER (0x14) /* handover occured during Position Measurement procedure */ /* * Value constants for VAL_sb_flag */ #define EOTD_INVALID (0x0) /* invalid data */ #define EOTD_VALID (0x1) /* valid data */ /* * Value constants for VAL_eotd_mode */ #define EOTD_IDLE (0x0) /* Idle mode */ #define EOTD_DEDIC (0x1) /* Dedicated or packet mode */ /* * Value constants for VAL_exp_otd */ /* * Value constants for VAL_fn */ #define FNMAX (0x297000) /* max Frame Number + 1 (26*51*2048) */ /* * Value constants for VAL_mfrm_offset */ /* * Value constants for VAL_otd_type */ #define ROUGH_RTD (0x0) /* only rough RTD has been provided by the NW */ #define EXPECTED_OTD (0x1) /* only expectedOTD has been provided by the NW */ #define BOTH_OTD (0x2) /* Both OTD / RTD types have been provided by the NW */ /* * Value constants for VAL_rough_rtd */ /* * Value constants for VAL_tav */ #define TA_NOT_AVAIL (0xff) /* no Timing Advance in Idle Mode */ /* * Value constants for VAL_uncertainty */ #define UNC_MAX_2BIT (0x0) /* uncertainty in bits. 0 - 2 bits */ #define UNC_MAX_4BIT (0x1) /* uncertainty in bits. 3 - 4 bits */ #define UNC_MAX_8BIT (0x2) /* uncertainty in bits. 5 - 8 bits */ #define UNC_MAX_12BIT (0x3) /* uncertainty in bits. 9 - 12 bits */ #define UNC_MAX_16BIT (0x4) /* uncertainty in bits. 13 - 16 bits */ #define UNC_MAX_22BIT (0x5) /* uncertainty in bits. 17 - 22 bits */ #define UNC_MAX_30BIT (0x6) /* uncertainty in bits. 23 - 30 bits */ #define UNC_GT_30BIT (0x7) /* uncertainty in bits. > 30 bits */ /* * user defined constants */ #define MAX_NCELL_EOTD_L1 (0xc) #define MAX_NCELL_EOTD (0xf) #define MAX_NCELL_EOTD_SI (0x20) #define XCOR_NO (0x12) #include "CDG_LEAVE.h" #endif