FreeCalypso > hg > fc-magnetite
view cdg-hybrid/cdginc/p_rrlp.h @ 600:8f50b202e81f
board preprocessor conditionals: prep for more FC hw in the future
This change eliminates the CONFIG_TARGET_FCDEV3B preprocessor symbol and
all preprocessor conditionals throughout the code base that tested for it,
replacing them with CONFIG_TARGET_FCFAM or CONFIG_TARGET_FCMODEM. These
new symbols are specified as follows:
CONFIG_TARGET_FCFAM is intended to cover all hardware designs created by
Mother Mychaela under the FreeCalypso trademark. This family will include
modem products (repackagings of the FCDEV3B, possibly with RFFE or even
RF transceiver changes), and also my desired FreeCalypso handset product.
CONFIG_TARGET_FCMODEM is intended to cover all FreeCalypso modem products
(which will be firmware-compatible with the FCDEV3B if they use TI Rita
transceiver, or will require a different fw build if we switch to one of
Silabs Aero transceivers), but not the handset product. Right now this
CONFIG_TARGET_FCMODEM preprocessor symbol is used to conditionalize
everything dealing with MCSI.
At the present moment the future of FC hardware evolution is still unknown:
it is not known whether we will ever have any beyond-FCDEV3B hardware at all
(contingent on uncertain funding), and if we do produce further FC hardware
designs, it is not known whether they will retain the same FIC modem core
(triband), if we are going to have a quadband design that still retains the
classic Rita transceiver, or if we are going to switch to Silabs Aero II
or some other transceiver. If we produce a quadband modem that still uses
Rita, it will run exactly the same fw as the FCDEV3B thanks to the way we
define TSPACT signals for the RF_FAM=12 && CONFIG_TARGET_FCFAM combination,
and the current fcdev3b build target will be renamed to fcmodem. OTOH, if
that putative quadband modem will be Aero-based, then it will require a
different fw build target, the fcdev3b target will stay as it is, and the
two targets will both define CONFIG_TARGET_FCFAM and CONFIG_TARGET_FCMODEM,
but will have different RF_FAM numbers. But no matter which way we are
going to evolve, it is not right to have conditionals on CONFIG_TARGET_FCDEV3B
in places like ACI, and the present change clears the way for future
evolution.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Mon, 01 Apr 2019 01:05:24 +0000 |
parents | e7a67accfad9 |
children |
line wrap: on
line source
/* +--------------------------------------------------------------------------+ | PROJECT : PROTOCOL STACK | | FILE : p_rrlp.h | | SOURCE : "sap\rrlp.pdf" | | LastModified : "2002-11-13" | | IdAndVersion : "8443.102.02.100" | | SrcFileTime : "Thu Nov 29 09:53:06 2007" | | Generated by CCDGEN_2.5.5A on Fri Oct 14 21:41:52 2016 | | !!DO NOT MODIFY!!DO NOT MODIFY!!DO NOT MODIFY!! | +--------------------------------------------------------------------------+ */ /* PRAGMAS * PREFIX : NONE * COMPATIBILITY_DEFINES : NO (require PREFIX) * ALWAYS_ENUM_IN_VAL_FILE: NO * ENABLE_GROUP: NO * CAPITALIZE_TYPENAME: NO */ #ifndef P_RRLP_H #define P_RRLP_H #define CDG_ENTER__P_RRLP_H #define CDG_ENTER__FILENAME _P_RRLP_H #define CDG_ENTER__P_RRLP_H__FILE_TYPE CDGINC #define CDG_ENTER__P_RRLP_H__LAST_MODIFIED _2002_11_13 #define CDG_ENTER__P_RRLP_H__ID_AND_VERSION _8443_102_02_100 #define CDG_ENTER__P_RRLP_H__SRC_FILE_TIME _Thu_Nov_29_09_53_06_2007 #include "CDG_ENTER.h" #undef CDG_ENTER__P_RRLP_H #undef CDG_ENTER__FILENAME #include "p_rrlp.val" #ifndef __T_assist_data__ #define __T_assist_data__ /* * Assistance Data * CCDGEN:WriteStruct_Count==2994 */ typedef struct { U16 arfcn; /*< 0: 2> Channel number */ U8 bsic; /*< 2: 1> Base station ID code */ U8 mfrm_offset; /*< 3: 1> multiframe offset */ U8 otd_type; /*< 4: 1> OTD type */ U8 _align0; /*< 5: 1> alignment */ U16 exp_otd; /*< 6: 2> expectedOTD */ U8 uncertainty; /*< 8: 1> Uncertainty of expected OTD */ U8 _align1; /*< 9: 1> alignment */ U16 rough_rtd; /*< 10: 2> rough RTD */ } T_assist_data; #endif #ifndef __T_bts_data__ #define __T_bts_data__ /* * BTS data * CCDGEN:WriteStruct_Count==2995 */ typedef struct { U8 bsic; /*< 0: 1> Base station ID code */ U8 _align0; /*< 1: 1> alignment */ U16 arfcn; /*< 2: 2> Channel number */ U8 quality; /*< 4: 1> 5 bit encoding: ranges */ U8 num_measurements; /*< 5: 1> Number of measurements */ U8 _align1; /*< 6: 1> alignment */ U8 _align2; /*< 7: 1> alignment */ S32 timing_offset; /*< 8: 4> Timing offset */ S32 timing_advance; /*< 12: 4> Timing advance */ } T_bts_data; #endif #ifndef __T_ref_bts_data__ #define __T_ref_bts_data__ /* * Reference BTS data * CCDGEN:WriteStruct_Count==2996 */ typedef struct { U16 cell_id; /*< 0: 2> Cell ID */ U16 lac; /*< 2: 2> Location area code */ U8 quality; /*< 4: 1> 5 bit encoding: ranges */ U8 num_measurements; /*< 5: 1> Number of measurements */ U8 _align0; /*< 6: 1> alignment */ U8 _align1; /*< 7: 1> alignment */ S32 timing_offset; /*< 8: 4> Timing offset */ U8 total_neigh_bts; /*< 12: 1> Total number of neighbor BTS */ U8 _align2; /*< 13: 1> alignment */ U8 _align3; /*< 14: 1> alignment */ U8 _align4; /*< 15: 1> alignment */ T_bts_data bts_data[R_MAX_REF_NEIGH_BTS]; /*< 16:240> BTS data */ U16 frame_number; /*<256: 2> Frame number */ U8 _align5; /*<258: 1> alignment */ U8 _align6; /*<259: 1> alignment */ S32 timing_advance; /*<260: 4> Timing advance */ } T_ref_bts_data; #endif #ifndef __T_timing_data__ #define __T_timing_data__ /* * Output of the position algorithm * CCDGEN:WriteStruct_Count==2997 */ typedef struct { U16 mcc; /*< 0: 2> Mobile country code */ U16 mnc; /*< 2: 2> Mobile country code */ U8 reference_relation; /*< 4: 1> 0, 1 or 2, only used when there are 2 ref cells and 3 measurement sets */ U8 time_slot; /*< 5: 1> Time slot number */ U8 std_resolution; /*< 6: 1> Standard resolution in meters */ U8 num_measurement_sets; /*< 7: 1> Number of measurement sets */ U8 num_reference_cells; /*< 8: 1> Number of reference cells */ U8 ta_correction_present; /*< 9: 1> */ U16 ta_correction; /*< 10: 2> TA correction */ T_ref_bts_data ref_bts_data[R_NUM_MEAS_SETS]; /*< 12:792> Reference BTS data */ } T_timing_data; #endif /* * End of substructure section, begin of primitive definition section */ #ifndef __T_RRLP_POS_IND__ #define __T_RRLP_POS_IND__ /* * * CCDGEN:WriteStruct_Count==2998 */ typedef struct { U8 _align0; /*< 0: 1> alignment */ U8 _align1; /*< 1: 1> alignment */ U8 v_assist_data; /*< 2: 1> valid-flag */ U8 c_assist_data; /*< 3: 1> counter */ T_assist_data assist_data[MAX_NCELL_EOTD]; /*< 4:180> Assistance Data */ U8 loc_method; /*<184: 1> Location method */ U8 pos_method; /*<185: 1> Position method */ U8 _align2; /*<186: 1> alignment */ U8 v_arfcn; /*<187: 1> valid-flag */ U16 arfcn; /*<188: 2> Channel number */ U8 v_bsic; /*<190: 1> valid-flag */ U8 bsic; /*<191: 1> Base station ID code */ } T_RRLP_POS_IND; #endif #ifndef __T_RRLP_POS_RES__ #define __T_RRLP_POS_RES__ /* * * CCDGEN:WriteStruct_Count==2999 */ typedef struct { T_timing_data timing_data; /*< 0:804> Output of the position algorithm */ } T_RRLP_POS_RES; #endif #ifndef __T_RRLP_ERROR_REQ__ #define __T_RRLP_ERROR_REQ__ /* * * CCDGEN:WriteStruct_Count==3000 */ typedef struct { U8 cause; /*< 0: 1> Cause Id Error */ U8 _align0; /*< 1: 1> alignment */ U8 _align1; /*< 2: 1> alignment */ U8 _align2; /*< 3: 1> alignment */ } T_RRLP_ERROR_REQ; #endif #include "CDG_LEAVE.h" #endif