FreeCalypso > hg > fc-magnetite
view cdg211/cdginc/m_mm.val @ 600:8f50b202e81f
board preprocessor conditionals: prep for more FC hw in the future
This change eliminates the CONFIG_TARGET_FCDEV3B preprocessor symbol and
all preprocessor conditionals throughout the code base that tested for it,
replacing them with CONFIG_TARGET_FCFAM or CONFIG_TARGET_FCMODEM. These
new symbols are specified as follows:
CONFIG_TARGET_FCFAM is intended to cover all hardware designs created by
Mother Mychaela under the FreeCalypso trademark. This family will include
modem products (repackagings of the FCDEV3B, possibly with RFFE or even
RF transceiver changes), and also my desired FreeCalypso handset product.
CONFIG_TARGET_FCMODEM is intended to cover all FreeCalypso modem products
(which will be firmware-compatible with the FCDEV3B if they use TI Rita
transceiver, or will require a different fw build if we switch to one of
Silabs Aero transceivers), but not the handset product. Right now this
CONFIG_TARGET_FCMODEM preprocessor symbol is used to conditionalize
everything dealing with MCSI.
At the present moment the future of FC hardware evolution is still unknown:
it is not known whether we will ever have any beyond-FCDEV3B hardware at all
(contingent on uncertain funding), and if we do produce further FC hardware
designs, it is not known whether they will retain the same FIC modem core
(triband), if we are going to have a quadband design that still retains the
classic Rita transceiver, or if we are going to switch to Silabs Aero II
or some other transceiver. If we produce a quadband modem that still uses
Rita, it will run exactly the same fw as the FCDEV3B thanks to the way we
define TSPACT signals for the RF_FAM=12 && CONFIG_TARGET_FCFAM combination,
and the current fcdev3b build target will be renamed to fcmodem. OTOH, if
that putative quadband modem will be Aero-based, then it will require a
different fw build target, the fcdev3b target will stay as it is, and the
two targets will both define CONFIG_TARGET_FCFAM and CONFIG_TARGET_FCMODEM,
but will have different RF_FAM numbers. But no matter which way we are
going to evolve, it is not right to have conditionals on CONFIG_TARGET_FCDEV3B
in places like ACI, and the present change clears the way for future
evolution.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Mon, 01 Apr 2019 01:05:24 +0000 |
parents | 56abf6cf8a0b |
children |
line wrap: on
line source
/* +--------------------------------------------------------------------------+ | PROJECT : PROTOCOL STACK | | FILE : m_mm.val | | SOURCE : "__out__\g23m_dfile\msg\mm.mdf" | | LastModified : "2002-04-18" | | IdAndVersion : "6147.602.02.105" | | SrcFileTime : "Mon Nov 24 15:51:08 2003" | | Generated by CCDGEN_2.5.5 on Fri Jun 08 13:59:14 2007 | | !!DO NOT MODIFY!!DO NOT MODIFY!!DO NOT MODIFY!! | +--------------------------------------------------------------------------+ */ /* PRAGMAS * PREFIX : NONE * COMPATIBILITY_DEFINES : NO (require PREFIX) * ALWAYS_ENUM_IN_VAL_FILE: NO * ENABLE_GROUP: NO * CAPITALIZE_TYPENAME: NO */ #ifndef M_MM_VAL #define M_MM_VAL #define CDG_ENTER__M_MM_VAL #define CDG_ENTER__FILENAME _M_MM_VAL #define CDG_ENTER__M_MM_VAL__FILE_TYPE CDGINC #define CDG_ENTER__M_MM_VAL__LAST_MODIFIED _2002_04_18 #define CDG_ENTER__M_MM_VAL__ID_AND_VERSION _6147_602_02_105 #define CDG_ENTER__M_MM_VAL__SRC_FILE_TIME _Mon_Nov_24_15_51_08_2003 #include "CDG_ENTER.h" #undef CDG_ENTER__M_MM_VAL #undef CDG_ENTER__FILENAME #include "m_rr_com.val" /* Access values independent from the corresponding h-file. */ /* * Value constants for VAL_cm_serv_type */ #define VAL_CM_SERV_TYPE___DEF (0x0) /* reserved */ #define ST_MOC (0x1) /* Mobile originating call establishment or packet mode connection establishment */ #define ST_EMERGENCY (0x2) /* Emergency call establishment */ #define ST_SMS (0x4) /* Short message service */ #define ST_SS (0x8) /* Supplementary service activation */ /* * Value constants for VAL_follow */ #define FOR_PENDING_NO (0x0) /* No follow-on request pending */ #define FOR_PENDING_YES (0x1) /* Follow-on request pending */ /* * Value constants for VAL_key_seq */ #define VAL_KEY_SEQ___7 (0x7) /* No key is available (MS to network); Reserved (network to MS) */ /* * Value constants for VAL_odd_even */ #define EVEN (0x0) /* even */ #define ODD (0x1) /* odd */ /* * Value constants for VAL_rej_cause */ #define VAL_REJ_CAUSE___DEF (0x0) /* DOWNLINK : Service option temporarily out of order UPLINK : Protocol error, unspecified */ #define RC_IMSI_IN_HLR (0x2) /* IMSI unknown in HLR */ #define RC_ILLEGAL_MS (0x3) /* Illegal MS */ #define RC_IMSI_IN_VLR (0x4) /* IMSI unknown in VLR */ #define RC_IMEI_NOT_ACCEPTED (0x5) /* IMEI not accepted */ #define RC_ILLEGAL_ME (0x6) /* Illegal ME */ #define RC_PLMN_NOT_ALLOWED (0xb) /* PLMN not allowed */ #define RC_LA_NOT_ALLOWED (0xc) /* Location Area not allowed */ #define RC_ROAMING_NOT_ALLOWED (0xd) /* National roaming not allowed in this location area */ #define RC_NETWORK_FAILURE (0x11) /* Network failure */ #define RC_CONGETION (0x16) /* Congestion */ #define RC_SERVICE_NOT_SUPPORTED (0x20) /* Service option not supported */ #define RC_SERVICE_NOT_SUBSCRIBED (0x21) /* Requested service option not subscribed */ #define RC_SERVICE_ORDER (0x22) /* Service option temporarily out of order */ #define RC_IDENTIFIY (0x26) /* Call cannot be identified */ #define RC_INCORRECT_MESSAGE (0x5f) /* Semantically incorrect message */ #define RC_INVALID_MAND_MESSAGE (0x60) /* Invalid mandatory information */ #define RC_MESSAGE_TYPE_NOT_IMPLEM (0x61) /* Message type non-existent or not implemented */ #define RC_MESSAGE_TYPE_INCOMPAT (0x62) /* Message type not compatible with the protocol state */ #define RC_IE_NOT_IMPLEM (0x63) /* Information element non-existent or not implemented */ #define RC_CONDITIONAL_IE (0x64) /* Conditional IE error */ #define RC_MESSAGE_INCOMPAT (0x65) /* Message not compatible with the protocol state */ #define RC_UNSPECIFIED (0x6f) /* Protocol error, unspecified */ /* * Value constants for VAL_ident_type */ #define VAL_IDENT_TYPE___DEF (0x0) /* reserved */ #define ID_TYPE_NO_IDENT (0x0) /* No Identity */ #define ID_TYPE_IMSI (0x1) /* IMSI */ #define ID_TYPE_IMEI (0x2) /* IMEI */ #define ID_TYPE_IMEISV (0x3) /* IMEISV */ #define ID_TYPE_TMSI (0x4) /* TMSI */ /* * Value constants for VAL_sapi */ #define SAPI_0 (0x0) /* SAPI used for RR, MM, CC and SS */ #define SAPI_3 (0x3) /* SAPI used for SMS */ /* * Value constants for VAL_pd */ #define PD_GCC (0x0) /* Group call control */ #define PD_BCC (0x1) /* Broadcast Call Control */ #define PD_PDSS1 (0x2) /* PDSS1 */ #define PD_CC (0x3) /* Call Control, call related SS messages */ #define PD_PDSS2 (0x4) /* PDSS2 */ #define PD_MM (0x5) /* Mobility Management messages */ #define PD_RR (0x6) /* Radio Resources management messages */ #define PD_GPRS_MM (0x8) /* GPRS Mobility Management messages */ #define PD_SMS (0x9) /* SMS messages */ #define PD_GPRS_SM (0xa) /* GPRS Session Management messages */ #define PD_SS (0xb) /* non call related SS messages */ #define PD_LS (0xc) /* Location services */ #define PD_TST (0xf) /* Reserved for test procedures described in GSM 11.10 */ /* * Value constants for VAL_cs */ #define CODING_SCHEME_SMSCB (0x0) /* Coding scheme cell broadcast short messages */ #define CODING_SCHEME_UCS2 (0x1) /* Coding scheme UCS2, 16 bit, ISO ISO/IEC10646 */ /* * Value constants for VAL_add_ci */ #define ADD_CI_NO (0x0) /* Country's Initials are not to be added */ #define ADD_CI_YES (0x1) /* Country's Initials are to be added */ /* * user defined constants */ #define L3MAX (0xfb) #define MAXNAME (0x28) #include "CDG_LEAVE.h" #endif