FreeCalypso > hg > fc-magnetite

view cdg211/cdginc/p_aci.val @ 600:8f50b202e81f

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
board preprocessor conditionals: prep for more FC hw in the future This change eliminates the CONFIG_TARGET_FCDEV3B preprocessor symbol and all preprocessor conditionals throughout the code base that tested for it, replacing them with CONFIG_TARGET_FCFAM or CONFIG_TARGET_FCMODEM. These new symbols are specified as follows: CONFIG_TARGET_FCFAM is intended to cover all hardware designs created by Mother Mychaela under the FreeCalypso trademark. This family will include modem products (repackagings of the FCDEV3B, possibly with RFFE or even RF transceiver changes), and also my desired FreeCalypso handset product. CONFIG_TARGET_FCMODEM is intended to cover all FreeCalypso modem products (which will be firmware-compatible with the FCDEV3B if they use TI Rita transceiver, or will require a different fw build if we switch to one of Silabs Aero transceivers), but not the handset product. Right now this CONFIG_TARGET_FCMODEM preprocessor symbol is used to conditionalize everything dealing with MCSI. At the present moment the future of FC hardware evolution is still unknown: it is not known whether we will ever have any beyond-FCDEV3B hardware at all (contingent on uncertain funding), and if we do produce further FC hardware designs, it is not known whether they will retain the same FIC modem core (triband), if we are going to have a quadband design that still retains the classic Rita transceiver, or if we are going to switch to Silabs Aero II or some other transceiver. If we produce a quadband modem that still uses Rita, it will run exactly the same fw as the FCDEV3B thanks to the way we define TSPACT signals for the RF_FAM=12 && CONFIG_TARGET_FCFAM combination, and the current fcdev3b build target will be renamed to fcmodem. OTOH, if that putative quadband modem will be Aero-based, then it will require a different fw build target, the fcdev3b target will stay as it is, and the two targets will both define CONFIG_TARGET_FCFAM and CONFIG_TARGET_FCMODEM, but will have different RF_FAM numbers. But no matter which way we are going to evolve, it is not right to have conditionals on CONFIG_TARGET_FCDEV3B in places like ACI, and the present change clears the way for future evolution.
author Mychaela Falconia <falcon@freecalypso.org>
date Mon, 01 Apr 2019 01:05:24 +0000
parents 56abf6cf8a0b
children
line wrap: on
line source

/*
+--------------------------------------------------------------------------+
| PROJECT : PROTOCOL STACK                                                 |
| FILE    : p_aci.val                                                      |
| SOURCE  : "__out__\g23m_dfile\prim\aci.pdf"                              |
| LastModified : "2004-06-01"                                              |
| IdAndVersion : "8411.105.00.205"                                         |
| SrcFileTime  : "Mon Jun 7 15:08:48 2004"                                 |
| Generated by CCDGEN_2.5.5 on Fri Jun 08 13:59:14 2007                    |
|           !!DO NOT MODIFY!!DO NOT MODIFY!!DO NOT MODIFY!!                |
+--------------------------------------------------------------------------+
*/

/* PRAGMAS
 * PREFIX                 : NONE
 * COMPATIBILITY_DEFINES  : NO (require PREFIX)
 * ALWAYS_ENUM_IN_VAL_FILE: NO
 * ENABLE_GROUP: NO
 * CAPITALIZE_TYPENAME: NO
 */


#ifndef P_ACI_VAL
#define P_ACI_VAL


#define CDG_ENTER__P_ACI_VAL

#define CDG_ENTER__FILENAME _P_ACI_VAL
#define CDG_ENTER__P_ACI_VAL__FILE_TYPE CDGINC
#define CDG_ENTER__P_ACI_VAL__LAST_MODIFIED _2004_06_01
#define CDG_ENTER__P_ACI_VAL__ID_AND_VERSION _8411_105_00_205

#define CDG_ENTER__P_ACI_VAL__SRC_FILE_TIME _Mon_Jun_7_15_08_48_2004

#include "CDG_ENTER.h"

#undef CDG_ENTER__P_ACI_VAL

#undef CDG_ENTER__FILENAME


/*
 * Value constants for VAL_cmd_src
 */
#define CMD_SRC_INT                    (0x0)      /* Command from internal application */
#define CMD_SRC_EXT                    (0x1)      /* Command from external application */
#define CMD_SRC_UNKNOWN                (0xff)     /* Reserved                       */

/*
 * Value constants for VAL_urt_stat
 */
#define URT_RDY_TO_SEND                (0x0)      /* URT is ready to accept new data */
#define URT_DATA_AVAIL                 (0x1)      /* URT has data available         */
#define URT_STAT_UNKNOWN               (0xff)     /* Reserved                       */

/*
 * Value constants for VAL_cause
 */
#define ABT_ABORT_DATA                 (0x0)      /* Abort data mode                */
#define ABT_ABORT_CMD                  (0x1)      /* Abort current command          */

/*
 * Value constants for VAL_ackflg
 */
#define ACI_NAK                        (0x0)      /* Not Acknowledge                */
#define ACI_ACK                        (0x1)      /* Acknowledge                    */

/*
 * user defined constants
 */
#define MAX_CMD_LEN                    (0x17c)    
#define MAX_TRC_LEN                    (0x50)     
#define MAX_DATA_LEN                   (0xc8)     

#include "CDG_LEAVE.h"


#endif