FreeCalypso > hg > fc-magnetite
view cdg3/cdginc-locosto/p_grlc.val @ 600:8f50b202e81f
board preprocessor conditionals: prep for more FC hw in the future
This change eliminates the CONFIG_TARGET_FCDEV3B preprocessor symbol and
all preprocessor conditionals throughout the code base that tested for it,
replacing them with CONFIG_TARGET_FCFAM or CONFIG_TARGET_FCMODEM. These
new symbols are specified as follows:
CONFIG_TARGET_FCFAM is intended to cover all hardware designs created by
Mother Mychaela under the FreeCalypso trademark. This family will include
modem products (repackagings of the FCDEV3B, possibly with RFFE or even
RF transceiver changes), and also my desired FreeCalypso handset product.
CONFIG_TARGET_FCMODEM is intended to cover all FreeCalypso modem products
(which will be firmware-compatible with the FCDEV3B if they use TI Rita
transceiver, or will require a different fw build if we switch to one of
Silabs Aero transceivers), but not the handset product. Right now this
CONFIG_TARGET_FCMODEM preprocessor symbol is used to conditionalize
everything dealing with MCSI.
At the present moment the future of FC hardware evolution is still unknown:
it is not known whether we will ever have any beyond-FCDEV3B hardware at all
(contingent on uncertain funding), and if we do produce further FC hardware
designs, it is not known whether they will retain the same FIC modem core
(triband), if we are going to have a quadband design that still retains the
classic Rita transceiver, or if we are going to switch to Silabs Aero II
or some other transceiver. If we produce a quadband modem that still uses
Rita, it will run exactly the same fw as the FCDEV3B thanks to the way we
define TSPACT signals for the RF_FAM=12 && CONFIG_TARGET_FCFAM combination,
and the current fcdev3b build target will be renamed to fcmodem. OTOH, if
that putative quadband modem will be Aero-based, then it will require a
different fw build target, the fcdev3b target will stay as it is, and the
two targets will both define CONFIG_TARGET_FCFAM and CONFIG_TARGET_FCMODEM,
but will have different RF_FAM numbers. But no matter which way we are
going to evolve, it is not right to have conditionals on CONFIG_TARGET_FCDEV3B
in places like ACI, and the present change clears the way for future
evolution.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Mon, 01 Apr 2019 01:05:24 +0000 |
parents | c15047b3d00d |
children |
line wrap: on
line source
/* +--------------------------------------------------------------------------+ | PROJECT : PROTOCOL STACK | | FILE : p_grlc.val | | SOURCE : "sap\grlc.pdf" | | LastModified : "2003-06-06" | | IdAndVersion : "8010.126.02.009" | | SrcFileTime : "Thu Nov 29 09:42:56 2007" | | Generated by CCDGEN_2.5.5A on Thu Sep 25 09:18:53 2014 | | !!DO NOT MODIFY!!DO NOT MODIFY!!DO NOT MODIFY!! | +--------------------------------------------------------------------------+ */ /* PRAGMAS * PREFIX : GRLC * COMPATIBILITY_DEFINES : NO * ALWAYS_ENUM_IN_VAL_FILE: NO * ENABLE_GROUP: NO * CAPITALIZE_TYPENAME: NO */ #ifndef P_GRLC_VAL #define P_GRLC_VAL #define CDG_ENTER__P_GRLC_VAL #define CDG_ENTER__FILENAME _P_GRLC_VAL #define CDG_ENTER__P_GRLC_VAL__FILE_TYPE CDGINC #define CDG_ENTER__P_GRLC_VAL__LAST_MODIFIED _2003_06_06 #define CDG_ENTER__P_GRLC_VAL__ID_AND_VERSION _8010_126_02_009 #define CDG_ENTER__P_GRLC_VAL__SRC_FILE_TIME _Thu_Nov_29_09_42_56_2007 #include "CDG_ENTER.h" #undef CDG_ENTER__P_GRLC_VAL #undef CDG_ENTER__FILENAME /* * Value constants for VAL_sapi */ #define GRLC_SAPI_1 (0x1) /* SAP for GMM */ #define GRLC_SAPI_3 (0x3) /* SAP 1 for SNDCP */ #define GRLC_SAPI_5 (0x5) /* SAP 2 for SNDCP */ #define GRLC_SAPI_7 (0x7) /* SAP for SMS */ #define GRLC_SAPI_9 (0x9) /* SAP 3 for SNDCP */ #define GRLC_SAPI_11 (0xb) /* SAP 4 for SNDCP */ #define GRLC_SAPI_TEST_MODE (0xff) /* This signs a primitive as GRLC-self generated for test purposes */ /* * Value constants for VAL_peak */ #define GRLC_PEAK_SUB (0x0) /* Subscribed peak throughput */ #define GRLC_PEAK_1K (0x1) /* Up to 1 000 octet/s */ #define GRLC_PEAK_2K (0x2) /* Up to 2 000 octet/s */ #define GRLC_PEAK_4K (0x3) /* Up to 4 000 octet/s */ #define GRLC_PEAK_8K (0x4) /* Up to 8 000 octet/s */ #define GRLC_PEAK_16K (0x5) /* Up to 16 000 octet/s */ #define GRLC_PEAK_32K (0x6) /* Up to 32 000 octet/s */ #define GRLC_PEAK_64K (0x7) /* Up to 64 000 octet/s */ #define GRLC_PEAK_128K (0x8) /* Up to 128 000 octet/s */ #define GRLC_PEAK_256K (0x9) /* Up to 256 000 octet/s */ /* * Value constants for VAL_relclass */ #define GRLC_RELCLASS_SUB (0x0) /* Subscribed reliability class */ #define GRLC_GTP_LLC_RLC_PROT (0x1) /* Acknowledged GTP, LLC, and RLC; Protected data */ #define GRLC_LLC_RLC_PROT (0x2) /* Unacknowledged GTP; Acknowledged LLC and RLC, Protected data */ #define GRLC_RLC_PROT (0x3) /* Unacknowledged GTP and LLC; Acknowledged RLC, Protected data */ #define GRLC_PROT (0x4) /* Unacknowledged GTP, LLC, and RLC, Protected data */ #define GRLC_NO_REL (0x5) /* Unacknowledged GTP, LLC, and RLC, Unprotected data */ /* * Value constants for VAL_delay */ #define GRLC_DELAY_SUB (0x0) /* Subscribed delay class */ #define GRLC_DELAY_1 (0x1) /* Delay class 1 */ #define GRLC_DELAY_2 (0x2) /* Delay class 2 */ #define GRLC_DELAY_3 (0x3) /* Delay class 3 */ #define GRLC_DELAY_4 (0x4) /* Delay class 4 (best effort) */ /* * Value constants for VAL_mean */ #define GRLC_MEAN_SUB (0x0) /* Subscribed mean throughput */ #define GRLC_MEAN_100 (0x1) /* 100 octet/h */ #define GRLC_MEAN_200 (0x2) /* 200 octet/h */ #define GRLC_MEAN_500 (0x3) /* 500 octet/h */ #define GRLC_MEAN_1K (0x4) /* 1 000 octet/h */ #define GRLC_MEAN_2K (0x5) /* 2 000 octet/h */ #define GRLC_MEAN_5K (0x6) /* 5 000 octet/h */ #define GRLC_MEAN_10K (0x7) /* 10 000 octet/h */ #define GRLC_MEAN_20K (0x8) /* 20 000 octet/h */ #define GRLC_MEAN_50K (0x9) /* 50 000 octet/h */ #define GRLC_MEAN_100K (0xa) /* 100 000 octet/h */ #define GRLC_MEAN_200K (0xb) /* 200 000 octet/h */ #define GRLC_MEAN_500K (0xc) /* 500 000 octet/h */ #define GRLC_MEAN_1M (0xd) /* 1 000 000 octet/h */ #define GRLC_MEAN_2M (0xe) /* 2 000 000 octet/h */ #define GRLC_MEAN_5M (0xf) /* 5 000 000 octet/h */ #define GRLC_MEAN_10M (0x10) /* 10 000 000 octet/h */ #define GRLC_MEAN_20M (0x11) /* 20 000 000 octet/h */ #define GRLC_MEAN_50M (0x12) /* 50 000 000 octet/h */ #define GRLC_MEAN_BEST (0x1f) /* Best effort */ /* * Value constants for VAL_preced */ #define GRLC_PRECED_SUB (0x0) /* Subscribed precedence */ #define GRLC_PRIO_HIGH (0x1) /* High priority */ #define GRLC_PRIO_NORM (0x2) /* Normal priority */ #define GRLC_PRIO_LOW (0x3) /* Low priority */ /* * Value constants for VAL_radio_prio */ #define GRLC_RADIO_PRIO_1 (0x0) /* Radio Priority Level 1 (highest) */ #define GRLC_RADIO_PRIO_2 (0x1) /* Radio Priority Level 2 */ #define GRLC_RADIO_PRIO_3 (0x2) /* Radio Priority Level 3 */ #define GRLC_RADIO_PRIO_4 (0x3) /* Radio Priority Level 4 (lowest) */ /* * Value constants for VAL_cause */ #define GRLC_DTACS_DEF (0x0) /* any other reason */ #define GRLC_DTACS_PAGE_RESPONSE (0x1) /* data is sent due to a page response */ #define GRLC_DTACS_MOBILITY_MANAGEMENT (0x2) /* mobility management data is sent */ #define GRLC_DTACS_EMPTY_FRAME (0x3) /* data is sent due to a cell update */ #define GRLC_DTACS_CELL_NOTIFI_NULL_FRAME (0x4) /* data is send due to cell notification using LLC unnumbered NULL command. */ // VALTAB-FF: REL99 /* * Value constants for VAL_pkt_flow_id */ // VAL-FF: REL99 #define GRLC_GRLC_PFI_BEST_EFFORT (0x0) /* best effort */ // VAL-FF: REL99 #define GRLC_GRLC_PFI_SIGNALING (0x1) /* signalling */ // VAL-FF: REL99 #define GRLC_GRLC_PFI_SMS (0x2) /* SMS */ // VAL-FF: REL99 #define GRLC_GRLC_PKT_FLOW_ID_NOT_PRES (0xff) /* value FF is used to indicate when packet flow identifier is not present */ #include "CDG_LEAVE.h" #endif