FreeCalypso > hg > fc-magnetite
view cdg3/cdginc-locosto/p_ll.val @ 600:8f50b202e81f
board preprocessor conditionals: prep for more FC hw in the future
This change eliminates the CONFIG_TARGET_FCDEV3B preprocessor symbol and
all preprocessor conditionals throughout the code base that tested for it,
replacing them with CONFIG_TARGET_FCFAM or CONFIG_TARGET_FCMODEM. These
new symbols are specified as follows:
CONFIG_TARGET_FCFAM is intended to cover all hardware designs created by
Mother Mychaela under the FreeCalypso trademark. This family will include
modem products (repackagings of the FCDEV3B, possibly with RFFE or even
RF transceiver changes), and also my desired FreeCalypso handset product.
CONFIG_TARGET_FCMODEM is intended to cover all FreeCalypso modem products
(which will be firmware-compatible with the FCDEV3B if they use TI Rita
transceiver, or will require a different fw build if we switch to one of
Silabs Aero transceivers), but not the handset product. Right now this
CONFIG_TARGET_FCMODEM preprocessor symbol is used to conditionalize
everything dealing with MCSI.
At the present moment the future of FC hardware evolution is still unknown:
it is not known whether we will ever have any beyond-FCDEV3B hardware at all
(contingent on uncertain funding), and if we do produce further FC hardware
designs, it is not known whether they will retain the same FIC modem core
(triband), if we are going to have a quadband design that still retains the
classic Rita transceiver, or if we are going to switch to Silabs Aero II
or some other transceiver. If we produce a quadband modem that still uses
Rita, it will run exactly the same fw as the FCDEV3B thanks to the way we
define TSPACT signals for the RF_FAM=12 && CONFIG_TARGET_FCFAM combination,
and the current fcdev3b build target will be renamed to fcmodem. OTOH, if
that putative quadband modem will be Aero-based, then it will require a
different fw build target, the fcdev3b target will stay as it is, and the
two targets will both define CONFIG_TARGET_FCFAM and CONFIG_TARGET_FCMODEM,
but will have different RF_FAM numbers. But no matter which way we are
going to evolve, it is not right to have conditionals on CONFIG_TARGET_FCDEV3B
in places like ACI, and the present change clears the way for future
evolution.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Mon, 01 Apr 2019 01:05:24 +0000 |
parents | c15047b3d00d |
children |
line wrap: on
line source
/* +--------------------------------------------------------------------------+ | PROJECT : PROTOCOL STACK | | FILE : p_ll.val | | SOURCE : "sap\ll.pdf" | | LastModified : "2003-02-04" | | IdAndVersion : "8441.104.99.017" | | SrcFileTime : "Thu Nov 29 09:44:38 2007" | | Generated by CCDGEN_2.5.5A on Thu Sep 25 09:18:53 2014 | | !!DO NOT MODIFY!!DO NOT MODIFY!!DO NOT MODIFY!! | +--------------------------------------------------------------------------+ */ /* PRAGMAS * PREFIX : NONE * COMPATIBILITY_DEFINES : NO (require PREFIX) * ALWAYS_ENUM_IN_VAL_FILE: NO * ENABLE_GROUP: NO * CAPITALIZE_TYPENAME: NO */ #ifndef P_LL_VAL #define P_LL_VAL #define CDG_ENTER__P_LL_VAL #define CDG_ENTER__FILENAME _P_LL_VAL #define CDG_ENTER__P_LL_VAL__FILE_TYPE CDGINC #define CDG_ENTER__P_LL_VAL__LAST_MODIFIED _2003_02_04 #define CDG_ENTER__P_LL_VAL__ID_AND_VERSION _8441_104_99_017 #define CDG_ENTER__P_LL_VAL__SRC_FILE_TIME _Thu_Nov_29_09_44_38_2007 #include "CDG_ENTER.h" #undef CDG_ENTER__P_LL_VAL #undef CDG_ENTER__FILENAME /* * Value constants for VAL_sapi */ #define LL_SAPI_1 (0x1) /* SAP for GMM */ #define LL_SAPI_3 (0x3) /* SAP 1 for SNDCP */ #define LL_SAPI_5 (0x5) /* SAP 2 for SNDCP */ #define LL_SAPI_7 (0x7) /* SAP for SMS */ #define LL_SAPI_9 (0x9) /* SAP 3 for SNDCP */ #define LL_SAPI_11 (0xb) /* SAP 4 for SNDCP */ #define LL_SAPI_INVALID (0xff) /* invalid SAPI identifier */ /* * Value constants for VAL_tlli */ #define LL_TLLI_INVALID (0xffffffff)/* invalid TLLI value */ /* * Value constants for VAL_xid_valid */ #define LL_XID_INVALID (0x0) /* layer-3 XID parameters are not valid */ #define LL_XID_VALID (0x1) /* layer-3 XID parameters are valid */ /* * Value constants for VAL_local */ #define LL_REL_NOTLOCAL (0x0) /* release both sides of the connection */ #define LL_REL_LOCAL (0x1) /* local release only (no notification of the peer LLC) */ /* * Value constants for VAL_cause */ #define LL_RELCS_INVALID_XID (0x5000) /* invalid XID response */ #define LL_RELCS_DM_RECEIVED (0x5001) /* DM received */ #define LL_RELCS_NO_PEER_RES (0x5002) /* no peer response */ #define LL_RELCS_NORMAL (0x5004) /* normal release */ /* * Value constants for VAL_cipher */ #define LL_CIPHER_OFF (0x0) /* UI frame not ciphered */ #define LL_CIPHER_ON (0x1) /* UI frame ciphered */ /* * Value constants for VAL_radio_prio */ #define LL_RADIO_PRIO_1 (0x0) /* Radio Priority Level 1 (higest) */ #define LL_RADIO_PRIO_2 (0x1) /* Radio Priority Level 2 */ #define LL_RADIO_PRIO_3 (0x2) /* Radio Priority Level 3 */ #define LL_RADIO_PRIO_4 (0x3) /* Radio Priority Level 4 (lowest) */ /* * Value constants for VAL_peak */ #define LL_PEAK_SUB (0x0) /* Subscribed peak throughput */ #define LL_PEAK_1K (0x1) /* Up to 1 000 octet/s */ #define LL_PEAK_2K (0x2) /* Up to 2 000 octet/s */ #define LL_PEAK_4K (0x3) /* Up to 4 000 octet/s */ #define LL_PEAK_8K (0x4) /* Up to 8 000 octet/s */ #define LL_PEAK_16K (0x5) /* Up to 16 000 octet/s */ #define LL_PEAK_32K (0x6) /* Up to 32 000 octet/s */ #define LL_PEAK_64K (0x7) /* Up to 64 000 octet/s */ #define LL_PEAK_128K (0x8) /* Up to 128 000 octet/s */ #define LL_PEAK_256K (0x9) /* Up to 256 000 octet/s */ /* * Value constants for VAL_relclass */ #define LL_RELCLASS_SUB (0x0) /* Subscribed reliability class */ #define LL_GTP_LLC_RLC_PROT (0x1) /* Acknowledged GTP, LLC, and RLC; Protected data */ #define LL_LLC_RLC_PROT (0x2) /* Unacknowledged GTP; Acknowledged LLC and RLC, Protected data */ #define LL_RLC_PROT (0x3) /* Unacknowledged GTP and LLC; Acknowledged RLC, Protected data */ #define LL_PROT (0x4) /* Unacknowledged GTP, LLC, and RLC, Protected data */ #define LL_NO_REL (0x5) /* Unacknowledged GTP, LLC, and RLC, Unprotected data */ /* * Value constants for VAL_delay */ #define LL_DELAY_SUB (0x0) /* Subscribed delay class */ #define LL_DELAY_1 (0x1) /* Delay class 1 */ #define LL_DELAY_2 (0x2) /* Delay class 2 */ #define LL_DELAY_3 (0x3) /* Delay class 3 */ #define LL_DELAY_4 (0x4) /* Delay class 4 (best effort) */ /* * Value constants for VAL_mean */ #define LL_MEAN_SUB (0x0) /* Subscribed mean throughput */ #define LL_MEAN_100 (0x1) /* 100 octet/h */ #define LL_MEAN_200 (0x2) /* 200 octet/h */ #define LL_MEAN_500 (0x3) /* 500 octet/h */ #define LL_MEAN_1K (0x4) /* 1 000 octet/h */ #define LL_MEAN_2K (0x5) /* 2 000 octet/h */ #define LL_MEAN_5K (0x6) /* 5 000 octet/h */ #define LL_MEAN_10K (0x7) /* 10 000 octet/h */ #define LL_MEAN_20K (0x8) /* 20 000 octet/h */ #define LL_MEAN_50K (0x9) /* 50 000 octet/h */ #define LL_MEAN_100K (0xa) /* 100 000 octet/h */ #define LL_MEAN_200K (0xb) /* 200 000 octet/h */ #define LL_MEAN_500K (0xc) /* 500 000 octet/h */ #define LL_MEAN_1M (0xd) /* 1 000 000 octet/h */ #define LL_MEAN_2M (0xe) /* 2 000 000 octet/h */ #define LL_MEAN_5M (0xf) /* 5 000 000 octet/h */ #define LL_MEAN_10M (0x10) /* 10 000 000 octet/h */ #define LL_MEAN_20M (0x11) /* 20 000 000 octet/h */ #define LL_MEAN_50M (0x12) /* 50 000 000 octet/h */ #define LL_MEAN_BEST (0x1f) /* Best effort */ /* * Value constants for VAL_preced */ #define LL_PRECED_SUB (0x0) /* Subscribed precedence */ #define LL_PRIO_HIGH (0x1) /* High priority */ #define LL_PRIO_NORM (0x2) /* Normal priority */ #define LL_PRIO_LOW (0x3) /* Low priority */ /* * Value constants for VAL_error_cause */ #define LL_ERRCS_INVALID_XID (0x5000) /* invalid XID response */ #define LL_ERRCS_NO_PEER_RES (0x5002) /* no peer response */ /* * Value constants for VAL_attached_counter */ #define LLC_NO_ATTACHE (0x0) /* no entity/service is attached to the primitive */ /* * Value constants for VAL_seg_pos */ #define LL_SEG_POS_NONE (0x0) /* In between */ #define LL_SEG_POS_FIRST (0x1) /* first */ #define LL_SEG_POS_LAST (0x2) /* last */ #define LL_SEG_POS_FIRST_LAST (0x3) /* both */ // VALTAB-FF: REL99 /* * Value constants for VAL_pkt_flow_id */ // VAL-FF: REL99 #define LL_PFI_BEST_EFFORT (0x0) /* best effort */ // VAL-FF: REL99 #define LL_PFI_SIGNALING (0x1) /* signalling */ // VAL-FF: REL99 #define LL_PFI_SMS (0x2) /* SMS */ // VAL-FF: REL99 #define LL_PKT_FLOW_ID_NOT_PRES (0xff) /* value FF is used to indicate when packet flwo identifier is not present */ /* * user defined constants */ #define N202 (0x4) #define LLC_SDU_OFFSET (0x25) #define LLC_SDU_OFFSET_BITS (0x128) #define LLC_MAX_L3_XID_LEN (0xff) #define LLC_MAX_L3_XID_LEN (0xff) #define LLC_MAX_CNF (0x20) #define LLC_ORIGINATING_ENTITY (0x10) #include "CDG_LEAVE.h" #endif