FreeCalypso > hg > fc-magnetite
view src/aci2/aci/aci_cphs.h @ 600:8f50b202e81f
board preprocessor conditionals: prep for more FC hw in the future
This change eliminates the CONFIG_TARGET_FCDEV3B preprocessor symbol and
all preprocessor conditionals throughout the code base that tested for it,
replacing them with CONFIG_TARGET_FCFAM or CONFIG_TARGET_FCMODEM. These
new symbols are specified as follows:
CONFIG_TARGET_FCFAM is intended to cover all hardware designs created by
Mother Mychaela under the FreeCalypso trademark. This family will include
modem products (repackagings of the FCDEV3B, possibly with RFFE or even
RF transceiver changes), and also my desired FreeCalypso handset product.
CONFIG_TARGET_FCMODEM is intended to cover all FreeCalypso modem products
(which will be firmware-compatible with the FCDEV3B if they use TI Rita
transceiver, or will require a different fw build if we switch to one of
Silabs Aero transceivers), but not the handset product. Right now this
CONFIG_TARGET_FCMODEM preprocessor symbol is used to conditionalize
everything dealing with MCSI.
At the present moment the future of FC hardware evolution is still unknown:
it is not known whether we will ever have any beyond-FCDEV3B hardware at all
(contingent on uncertain funding), and if we do produce further FC hardware
designs, it is not known whether they will retain the same FIC modem core
(triband), if we are going to have a quadband design that still retains the
classic Rita transceiver, or if we are going to switch to Silabs Aero II
or some other transceiver. If we produce a quadband modem that still uses
Rita, it will run exactly the same fw as the FCDEV3B thanks to the way we
define TSPACT signals for the RF_FAM=12 && CONFIG_TARGET_FCFAM combination,
and the current fcdev3b build target will be renamed to fcmodem. OTOH, if
that putative quadband modem will be Aero-based, then it will require a
different fw build target, the fcdev3b target will stay as it is, and the
two targets will both define CONFIG_TARGET_FCFAM and CONFIG_TARGET_FCMODEM,
but will have different RF_FAM numbers. But no matter which way we are
going to evolve, it is not right to have conditionals on CONFIG_TARGET_FCDEV3B
in places like ACI, and the present change clears the way for future
evolution.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Mon, 01 Apr 2019 01:05:24 +0000 |
parents | 93999a60b835 |
children |
line wrap: on
line source
/* +--------------------------------------------------------------------+ | PROJECT: GSM-F&D (8411) $Workfile:: aci_cphs.h $| | $Author:: $ CONDAT AG $Revision:: $| | CREATED: $Modtime:: $| | STATE : code | +--------------------------------------------------------------------+ MODULE : ACI_CPHS PURPOSE : Command handler interface definitions for CPHS */ #ifdef FF_CPHS #ifndef ACI_CPHS_H #define ACI_CPHS_H /**************** CPHS Module *****************************************/ EXTERN T_ACI_RETURN sAT_PercentCPHS( T_ACI_CMD_SRC srcId, T_ACI_CPHS_INIT init_cphs ); EXTERN T_ACI_RETURN qAT_PercentCPHS( T_ACI_CMD_SRC srcId, T_ACI_CPHS_INIT *init_cphs); EXTERN T_ACI_RETURN sAT_PercentCPNUMS( T_ACI_CMD_SRC srcId, UBYTE element_id, UBYTE mode ); EXTERN T_ACI_RETURN tAT_PercentCPNUMS( T_ACI_CMD_SRC srcId ); EXTERN T_ACI_RETURN qAT_PercentCPALS( T_ACI_CMD_SRC srcId, UBYTE call_id, T_CPHS_LINES *line, CHAR *line_desc, UBYTE *max_line_desc); EXTERN T_ACI_RETURN sAT_PercentCPVWI( T_ACI_CMD_SRC srcId, UBYTE flag_set, USHORT lines); EXTERN T_ACI_RETURN qAT_PercentCPVWI( T_ACI_CMD_SRC srcId, UBYTE *flag_set, USHORT line); EXTERN T_ACI_RETURN qAT_PercentCPOPN( T_ACI_CMD_SRC srcId, CHAR *longname, UBYTE *max_longname, CHAR *shortname, UBYTE *max_shortname); EXTERN T_ACI_RETURN sAT_PercentCPINF( T_ACI_CMD_SRC srcId, UBYTE *csp, UBYTE csp_len); EXTERN T_ACI_RETURN qAT_PercentCPINF( T_ACI_CMD_SRC srcId, UBYTE *phase, USHORT *sst, CHAR *csp, CHAR *csp2, UBYTE *max_csp_size, UBYTE *max_csp2_size); EXTERN T_ACI_RETURN qAT_PercentCPMB( T_ACI_CMD_SRC srcId, UBYTE rec_id, T_CPHS_LINES *line, CHAR *number, T_ACI_TOA_TON *ton, T_ACI_TOA_NPI *npi, CHAR *alpha_id, UBYTE *first); EXTERN T_ACI_RETURN sAT_PercentCPMBW( T_ACI_CMD_SRC srcId, SHORT index, CHAR* number, T_ACI_TOA* type, T_CPHS_PB_TEXT* text); GLOBAL T_ACI_RETURN tAT_PercentCPMBW ( T_ACI_CMD_SRC srcId, SHORT* firstIdx, SHORT* lastIdx, UBYTE* nlength, UBYTE* tlength ); EXTERN T_ACI_RETURN sAT_PercentCPCFU( T_ACI_CMD_SRC srcId, UBYTE cfu_set, T_CPHS_LINES lines ); EXTERN T_ACI_RETURN qAT_PercentCPCFU( T_ACI_CMD_SRC srcId, UBYTE *cfu_set, T_CPHS_LINES line ); #ifdef CMH_F_C EXTERN void rCI_PercentCPNUMS(void); EXTERN void rAT_PercentCPNUMS(void); EXTERN void rCI_PercentCPVWI (void); EXTERN void rAT_PercentCPVWI (void); EXTERN void rCI_PercentCPROAM (void); EXTERN void rAT_PercentCPROAM (void); #else EXTERN void rCI_PercentCPNUMS(UBYTE element_index, UBYTE index_level, CHAR *alpha_tag, CHAR *number, BOOL premium_flag, BOOL network_flag, UBYTE type_of_address); EXTERN void rAT_PercentCPNUMS(UBYTE element_index, UBYTE index_level, CHAR *alpha_tag, CHAR *number, BOOL premium_flag, BOOL network_flag, UBYTE type_of_address); EXTERN void rCI_PercentCPVWI (UBYTE flag_set, USHORT line); EXTERN void rAT_PercentCPVWI (UBYTE flag_set, USHORT line); EXTERN void rCI_PercentCPROAM (UBYTE roam_status); EXTERN void rAT_PercentCPROAM (UBYTE roam_status); #endif /* CMH_F_C */ /**********************************************************************/ #endif /* ACI_CPHS_H */ #endif /* FF_CPHS */ /*==== EOF ========================================================*/