FreeCalypso > hg > fc-magnetite
view src/aci2/aci/ati_src_tst.c @ 600:8f50b202e81f
board preprocessor conditionals: prep for more FC hw in the future
This change eliminates the CONFIG_TARGET_FCDEV3B preprocessor symbol and
all preprocessor conditionals throughout the code base that tested for it,
replacing them with CONFIG_TARGET_FCFAM or CONFIG_TARGET_FCMODEM. These
new symbols are specified as follows:
CONFIG_TARGET_FCFAM is intended to cover all hardware designs created by
Mother Mychaela under the FreeCalypso trademark. This family will include
modem products (repackagings of the FCDEV3B, possibly with RFFE or even
RF transceiver changes), and also my desired FreeCalypso handset product.
CONFIG_TARGET_FCMODEM is intended to cover all FreeCalypso modem products
(which will be firmware-compatible with the FCDEV3B if they use TI Rita
transceiver, or will require a different fw build if we switch to one of
Silabs Aero transceivers), but not the handset product. Right now this
CONFIG_TARGET_FCMODEM preprocessor symbol is used to conditionalize
everything dealing with MCSI.
At the present moment the future of FC hardware evolution is still unknown:
it is not known whether we will ever have any beyond-FCDEV3B hardware at all
(contingent on uncertain funding), and if we do produce further FC hardware
designs, it is not known whether they will retain the same FIC modem core
(triband), if we are going to have a quadband design that still retains the
classic Rita transceiver, or if we are going to switch to Silabs Aero II
or some other transceiver. If we produce a quadband modem that still uses
Rita, it will run exactly the same fw as the FCDEV3B thanks to the way we
define TSPACT signals for the RF_FAM=12 && CONFIG_TARGET_FCFAM combination,
and the current fcdev3b build target will be renamed to fcmodem. OTOH, if
that putative quadband modem will be Aero-based, then it will require a
different fw build target, the fcdev3b target will stay as it is, and the
two targets will both define CONFIG_TARGET_FCFAM and CONFIG_TARGET_FCMODEM,
but will have different RF_FAM numbers. But no matter which way we are
going to evolve, it is not right to have conditionals on CONFIG_TARGET_FCDEV3B
in places like ACI, and the present change clears the way for future
evolution.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Mon, 01 Apr 2019 01:05:24 +0000 |
parents | 93999a60b835 |
children |
line wrap: on
line source
/* +----------------------------------------------------------------------------- | Project : GSM-PS (6147) | Modul : ATI_SRC_TST +----------------------------------------------------------------------------- | Copyright 2002 Texas Instruments Berlin, AG | All rights reserved. | | This file is confidential and a trade secret of Texas | Instruments Berlin, AG | The receipt of or possession of this file does not convey | any rights to reproduce or disclose its contents or to | manufacture, use, or sell anything it may describe, in | whole, or in part, without the specific written consent of | Texas Instruments Berlin, AG. +----------------------------------------------------------------------------- | Purpose : this source is used for W32 tests +----------------------------------------------------------------------------- */ #ifdef DTI #ifndef ATI_SRC_TST_C #define ATI_SRC_TST_C #endif #include "aci_all.h" /*==== INCLUDES ===================================================*/ #include "line_edit.h" #include "aci_cmh.h" #include "ati_cmd.h" #include "aci_cmd.h" #include "dti.h" /* functionality of the dti library */ #include "aci_lst.h" #include "dti_conn_mng.h" #ifdef UART #include "psa_uart.h" #include "cmh_uart.h" #endif #ifdef FF_PSI #include "psa_psi.h" #include "cmh_psi.h" #endif /*FF_PSI*/ #include "aci_io.h" #include "aci_mem.h" #include "aci.h" #include "ati_io.h" #define ATI_SRC_TST_GLOBALS #include "ati_src_tst.h" #include "sap_dti.h" #include "ati_int.h" #ifdef UART #include "ati_src_uart.h" #endif #ifdef FF_PSI #include "ati_src_psi.h" #endif /*FF_PSI*/ #ifdef FF_ATI_BAT #include "ati_bat.h" #endif /* FF_ATI_BAT */ /*==== CONSTANTS ==================================================*/ /*==== TYPES ======================================================*/ /*==== EXPORT =====================================================*/ /*==== VARIABLES ==================================================*/ /*==== FUNCTIONS ==================================================*/ EXTERN void uart_src_test_sendString (UBYTE *string, USHORT string_len, T_ACI_DTI_PRC *src_infos, T_ATI_OUTPUT_TYPE output_type); /*=================================================================*/ /* +-------------------------------------------------------------------+ | PROJECT : GSM-PS (6147) MODULE : ati_src_tst | | ROUTINE : ati_src_tst_result_cb | +-------------------------------------------------------------------+ PURPOSE : */ GLOBAL void ati_src_tst_result_cb (UBYTE src_id, T_ATI_OUTPUT_TYPE output_type, UBYTE *output, USHORT output_len) { #ifdef UART T_ACI_DTI_PRC *src_infos = NULL; #endif #ifdef FF_PSI T_ACI_DTI_PRC_PSI *src_infos_psi = NULL; #endif /*FF_PSI*/ if( output_len EQ 0 ) { /* if length is 0, then do not send (happens if some formatting characters, e.g CR or LF have been sent: they are irrelevant for this source...) */ return; } #ifdef RMV_01_04_03 #ifdef FF_TWO_UART_PORTS /* disable output to UART on data channel */ if (src_id EQ UART_DATA_CHANNEL) { return; } #endif #endif #ifdef UART src_infos = find_element (uart_src_params, (UBYTE)src_id, cmhUARTtest_srcId); #endif #ifdef FF_PSI src_infos_psi = find_element (psi_src_params, src_id, cmhPSItest_srcId); #endif /*FF_PSI*/ #if 0 if (src_infos EQ NULL) { TRACE_EVENT_P1("[ERR] uart_src_result_cb: src_id=%d not found", src_id) ; return; } #endif if (IS_ECHO_OUTPUT (output_type) AND !IS_CONFIRM_OUTPUT (output_type)) { return; } else { if( #ifdef UART (src_infos EQ NULL) #else TRUE #endif AND #ifdef FF_PSI (src_infos_psi EQ NULL) #else TRUE #endif ) { PALLOC (aci_cmd_ind, ACI_CMD_IND); TRACE_FUNCTION ("ati_src_tst_result_cb ()"); /* aci_cmd_ind->cmd_len = output_len; */ /* * SKA 2002-09-11 to make the TST source V.25 ter compatible, but don't change * existing test cases, remove the '\r' which we inserted in aci_aci_cmd_req * and reduce the length by one */ if (*(output+output_len-1) EQ '\r') { *(output+output_len-1) = '\0'; /* remove the '\r' */ --output_len; } aci_cmd_ind->cmd_len = output_len; strncpy ((CHAR*)aci_cmd_ind->cmd_seq, output, output_len); trace_cmd_line ("ATI TST Output", (char *)output, src_id, output_len); PSENDX (ACI, aci_cmd_ind); } #ifdef UART else if (src_infos NEQ NULL) { uart_src_test_sendString(output, output_len, src_infos, output_type); } #endif #ifdef FF_PSI else /*PSI src*/ { psi_src_test_sendString(output, output_len, src_infos_psi, output_type); } #endif /*FF_PSI*/ } } /* +-------------------------------------------------------------------+ | PROJECT : GSM-PS (6147) MODULE : ati_src_tst | | ROUTINE : ati_src_tst_line_state_cb | +-------------------------------------------------------------------+ PURPOSE : register the test source for W32 tests at the ATI */ GLOBAL void ati_src_tst_line_state_cb (UBYTE src_id, T_ATI_LINE_STATE_TYPE line_state_type, ULONG line_state_param) { TRACE_FUNCTION ("ati_src_tst_line_state_cb ()"); switch (line_state_type) { case ATI_LINE_STATE_OUTPUT_TYPE: TRACE_EVENT_P1 ("[DBG] ati_src_tst_line_state_cb (): ATI_LINE_STATE_OUTPUT_TYPE = %d", line_state_param); break; case ATI_LINE_STATE_DCD: TRACE_EVENT_P1 ("[DBG] ati_src_tst_line_state_cb (): ATI_LINE_STATE_DCD = %d", line_state_param); break; case ATI_LINE_STATE_RNG: /* TODO */ { T_IO_RING_PARAMS rng_params; memcpy (&rng_params, (T_IO_RING_PARAMS*)line_state_param, sizeof(T_IO_RING_PARAMS)); TRACE_EVENT_P1 ("[DBG] ati_src_tst_line_state_cb (): ATI_LINE_STATE_RNG = %d", rng_params.ring_stat); break; } default: TRACE_EVENT_P1 ("[WRN] ati_src_tst_line_state_cb (): UNKNOWN line_state_type = %d", line_state_type); break; } } /* +-------------------------------------------------------------------+ | PROJECT : GSM-PS (6147) MODULE : ati_src_tst | | ROUTINE : ati_src_tst_init | +-------------------------------------------------------------------+ PURPOSE : register the test source for W32 tests at the ATI */ GLOBAL void ati_src_tst_init ( UBYTE cmd_src ) { int i; static BOOL initialzed = FALSE; TRACE_FUNCTION ("ati_src_tst_init ()"); if (initialzed EQ FALSE) { for (i=0; i<MAX_TST_SRC; i++) { tst_src_id[i] = 0; } initialzed = TRUE; } tst_src_id[cmd_src - 1] = ati_init (ATI_SRC_TYPE_TST, ati_src_tst_result_cb, ati_src_tst_line_state_cb); TRACE_EVENT_P1 ("ati_src_tst_init: srcId=%d", tst_src_id[cmd_src - 1]); #ifndef FF_ATI_BAT if (tst_src_id[cmd_src - 1]<CMD_SRC_MAX) { if (tst_src_id[cmd_src - 1]==CMD_SRC_LCL) aci_cmd_src_mode_set(tst_src_id[cmd_src - 1],CMD_MODE_ACI); else aci_cmd_src_mode_set(tst_src_id[cmd_src - 1],CMD_MODE_ATI); } #endif ati_switch_mode(tst_src_id[cmd_src - 1], ATI_CMD_MODE); } /* +-------------------------------------------------------------------+ | PROJECT : GSM-PS (6147) MODULE : ati_src_tst | | ROUTINE : ati_src_tst_get_src_id | +-------------------------------------------------------------------+ PURPOSE : get the test source for W32 tests at the ATI */ GLOBAL UBYTE ati_src_tst_get_src_id ( UBYTE cmd_src ) { TRACE_FUNCTION ("ati_src_tst_get_src_id ()"); if ( cmd_src EQ CMD_SRC_UNKNOWN ) { cmd_src = CMD_SRC_EXT; while ( cmd_src < MAX_TST_SRC && tst_src_id[cmd_src - 1] NEQ DTI_MNG_ID_NOTPRESENT ) { cmd_src++; } if ( cmd_src > MAX_TST_SRC || cmd_src EQ CMD_SRC_UNKNOWN ) { return DTI_MNG_ID_NOTPRESENT; } ati_src_tst_init( cmd_src ); } return tst_src_id[cmd_src - 1]; } /* +-------------------------------------------------------------------+ | PROJECT : GSM-PS (6147) MODULE : ati_src_tst | | ROUTINE : ati_src_tst_finit | +-------------------------------------------------------------------+ PURPOSE : deregister the test source for W32 tests at the ATI */ GLOBAL void ati_src_tst_finit (void) { SHORT i = 0; TRACE_FUNCTION ("ati_src_tst_finit ()"); for ( i = 0; i < MAX_TST_SRC AND tst_src_id[i] NEQ DTI_MNG_ID_NOTPRESENT; i++) { ati_finit (tst_src_id[i]); tst_src_id[i] = DTI_MNG_ID_NOTPRESENT; } } /* +-------------------------------------------------------------------+ | PROJECT : GSM-PS (6147) MODULE : ati_src_tst | | ROUTINE : ati_src_tst_proc_cmd | +-------------------------------------------------------------------+ PURPOSE : for W32 tests */ GLOBAL BOOL ati_src_tst_proc_cmd (T_ACI_CMD_REQ *aci_cmd_req) { T_ATI_SRC_PARAMS *src_params = find_element (ati_src_list, tst_src_id[aci_cmd_req->cmd_src - 1], search_ati_src_id); if ( tst_src_id[aci_cmd_req->cmd_src - 1] NEQ DTI_MNG_ID_NOTPRESENT ) { /* * SKA 2002-09-11 disable echoing, else no test case pass * the strange tst_src_id[aci_cmd_req->cmd_src - 1] has to be explained by BRZ */ ati_user_output_cfg[tst_src_id[aci_cmd_req->cmd_src - 1]].atE = 0; if (src_params->text_mode EQ CMD_MODE) { TRACE_FUNCTION ("ati_src_tst_proc_cmd () CMD MODE"); if (strchr (aci_cmd_req->cmd_seq, '\r')) { aci_cmd_req->cmd_seq[aci_cmd_req->cmd_len] = '\0'; } else { aci_cmd_req->cmd_seq[aci_cmd_req->cmd_len] = '\r'; /* make it V.25 ter compatible */ aci_cmd_req->cmd_seq[(aci_cmd_req->cmd_len) + 1] = '\0'; aci_cmd_req->cmd_len++; } } else /* text has to be terminated by Ctrl-Z */ { TRACE_FUNCTION ("ati_src_tst_proc_cmd () TEXT MODE"); if (aci_cmd_req->cmd_seq[aci_cmd_req->cmd_len] NEQ 0x1a) /* Ctrl-Z */ { aci_cmd_req->cmd_seq[aci_cmd_req->cmd_len] = 0x1a; /* make it V.25 ter compatible */ aci_cmd_req->cmd_seq[(aci_cmd_req->cmd_len) + 1] = '\0'; aci_cmd_req->cmd_len++; } else { aci_cmd_req->cmd_seq[aci_cmd_req->cmd_len] = '\0'; } } return (ati_execute (tst_src_id[aci_cmd_req->cmd_src - 1], aci_cmd_req->cmd_seq, aci_cmd_req->cmd_len)); } else { TRACE_EVENT("ATI TST Input: wrong src_id"); return FALSE; } } /* +-------------------------------------------------------------------+ | PROJECT : GSM-PS (6147) MODULE : ati_src_tst | | ROUTINE : ati_src_tst_abort | +-------------------------------------------------------------------+ PURPOSE : for W32 tests */ GLOBAL BOOL ati_src_tst_abort (UBYTE src_id) { TRACE_FUNCTION ("ati_src_tst_abort ()"); return (ati_abort(tst_src_id[src_id - 1])); } /* +-------------------------------------------------------------------+ | PROJECT : GSM-PS (6147) MODULE : ati_src_tst | | ROUTINE : ati_src_tst_sendString | +-------------------------------------------------------------------+ PURPOSE : Provides the test-source output over ACI_CMD_IND. Removes the separator and generates one ACI_CMD_IND for every separated message. */ GLOBAL void ati_src_tst_sendString(T_desc2 *data, UBYTE src_id) { CHAR *string, *pch_start, *pch_end; TRACE_FUNCTION ("ati_src_tst_sendString ()"); ACI_MALLOC(string, data->len + 1); strncpy(string, data->buffer, data->len); string[data->len] = '\0'; pch_start = string; while ( NULL NEQ (pch_end = strchr(pch_start, ATI_TEST_SRC_SEPARATOR)) ) { *pch_end = '\0'; /* send message to the test interface*/ { PALLOC (aci_cmd_ind, ACI_CMD_IND); aci_cmd_ind->cmd_len = strlen(pch_start); strncpy ((CHAR*)aci_cmd_ind->cmd_seq, pch_start, aci_cmd_ind->cmd_len); trace_cmd_line ("ATI TST Output", pch_start, src_id, aci_cmd_ind->cmd_len); PSENDX (ACI, aci_cmd_ind); } pch_start = pch_end + 1; } ACI_MFREE(string); } #endif /* DTI */