view src/aci2/aci/l4_tim.h @ 600:8f50b202e81f

board preprocessor conditionals: prep for more FC hw in the future This change eliminates the CONFIG_TARGET_FCDEV3B preprocessor symbol and all preprocessor conditionals throughout the code base that tested for it, replacing them with CONFIG_TARGET_FCFAM or CONFIG_TARGET_FCMODEM. These new symbols are specified as follows: CONFIG_TARGET_FCFAM is intended to cover all hardware designs created by Mother Mychaela under the FreeCalypso trademark. This family will include modem products (repackagings of the FCDEV3B, possibly with RFFE or even RF transceiver changes), and also my desired FreeCalypso handset product. CONFIG_TARGET_FCMODEM is intended to cover all FreeCalypso modem products (which will be firmware-compatible with the FCDEV3B if they use TI Rita transceiver, or will require a different fw build if we switch to one of Silabs Aero transceivers), but not the handset product. Right now this CONFIG_TARGET_FCMODEM preprocessor symbol is used to conditionalize everything dealing with MCSI. At the present moment the future of FC hardware evolution is still unknown: it is not known whether we will ever have any beyond-FCDEV3B hardware at all (contingent on uncertain funding), and if we do produce further FC hardware designs, it is not known whether they will retain the same FIC modem core (triband), if we are going to have a quadband design that still retains the classic Rita transceiver, or if we are going to switch to Silabs Aero II or some other transceiver. If we produce a quadband modem that still uses Rita, it will run exactly the same fw as the FCDEV3B thanks to the way we define TSPACT signals for the RF_FAM=12 && CONFIG_TARGET_FCFAM combination, and the current fcdev3b build target will be renamed to fcmodem. OTOH, if that putative quadband modem will be Aero-based, then it will require a different fw build target, the fcdev3b target will stay as it is, and the two targets will both define CONFIG_TARGET_FCFAM and CONFIG_TARGET_FCMODEM, but will have different RF_FAM numbers. But no matter which way we are going to evolve, it is not right to have conditionals on CONFIG_TARGET_FCDEV3B in places like ACI, and the present change clears the way for future evolution.
author Mychaela Falconia <falcon@freecalypso.org>
date Mon, 01 Apr 2019 01:05:24 +0000
parents 93999a60b835
children
line wrap: on
line source

/* 
+----------------------------------------------------------------------------- 
|  Project :  GSM-PS (6147)
|  Modul   :  L4_TIM
+----------------------------------------------------------------------------- 
|  Copyright 2002 Texas Instruments Berlin, AG 
|                 All rights reserved. 
| 
|                 This file is confidential and a trade secret of Texas 
|                 Instruments Berlin, AG 
|                 The receipt of or possession of this file does not convey 
|                 any rights to reproduce or disclose its contents or to 
|                 manufacture, use, or sell anything it may describe, in 
|                 whole, or in part, without the specific written consent of 
|                 Texas Instruments Berlin, AG. 
+----------------------------------------------------------------------------- 
|  Purpose :  Definitions of timer indices
+----------------------------------------------------------------------------- 
*/ 


/*
 * Timer Indices
 */

#define SMI_TBACKLIGHT           0
#define SMI_TSLIDER              1
#define SMI_TSHIFTKEY            2
#define SMI_TUNIVERSAL           3

#define ACI_TRING                4
#define ACI_TMPTY                5
#define ACI_TFIT                 6
#define ACI_TDTMF                7

#if defined (FAX_AND_DATA)
#define FIT_RUN                  8
#endif

#define AOC_CALLTIMER            9
#define AOC_AOCTIMER             10
#define MAX_AOC_TIMER           7   /* should be changed to MAX_CALL_NR */


/* timers in between are reserved for AOC */
#define MFW_TIMER               (AOC_AOCTIMER+MAX_AOC_TIMER)

#define ACI_IPR                 (MFW_TIMER + 1)
#define ACI_TECT                (ACI_IPR + 1)
#define ACI_TDELAY              (ACI_TECT + 1)

#if defined FF_EOTD /*&& defined _SIMULATION_*/
#define ACI_LC_1                (ACI_TDELAY+1)
#define ACI_LC_2                (ACI_LC_1+1)
#define ACI_LC_3                (ACI_LC_1+2)
#define ACI_LC_4                (ACI_LC_1+3)
#define ACI_LC_5                (ACI_LC_1+4)
#endif

#ifndef FF_EOTD
#define ACI_REPEAT_HND          (ACI_TDELAY +1)
#else
#define ACI_REPEAT_HND          (ACI_LC_1+5)
#endif /* FF_EOTD */

#define ACI_CNMA_TIMER_HANDLE   (ACI_REPEAT_HND+1)

#define ACI_REPEAT_1         5000   /* 5 sec for waiting for 1th redialling */
#define ACI_REPEAT_2_4       60000  /* 1 min for waiting for 2th to 4th redialling */
#define ACI_CNMA_TIMER_VALUE 15000  /* 15 sec. for waiting for the +CNMA */
#define ACI_DELAY_TIMER      5000   /* 5 sec delay for various REDIAL attempts */