FreeCalypso > hg > fc-magnetite
view src/aci2/aci/psa_mmf.c @ 600:8f50b202e81f
board preprocessor conditionals: prep for more FC hw in the future
This change eliminates the CONFIG_TARGET_FCDEV3B preprocessor symbol and
all preprocessor conditionals throughout the code base that tested for it,
replacing them with CONFIG_TARGET_FCFAM or CONFIG_TARGET_FCMODEM. These
new symbols are specified as follows:
CONFIG_TARGET_FCFAM is intended to cover all hardware designs created by
Mother Mychaela under the FreeCalypso trademark. This family will include
modem products (repackagings of the FCDEV3B, possibly with RFFE or even
RF transceiver changes), and also my desired FreeCalypso handset product.
CONFIG_TARGET_FCMODEM is intended to cover all FreeCalypso modem products
(which will be firmware-compatible with the FCDEV3B if they use TI Rita
transceiver, or will require a different fw build if we switch to one of
Silabs Aero transceivers), but not the handset product. Right now this
CONFIG_TARGET_FCMODEM preprocessor symbol is used to conditionalize
everything dealing with MCSI.
At the present moment the future of FC hardware evolution is still unknown:
it is not known whether we will ever have any beyond-FCDEV3B hardware at all
(contingent on uncertain funding), and if we do produce further FC hardware
designs, it is not known whether they will retain the same FIC modem core
(triband), if we are going to have a quadband design that still retains the
classic Rita transceiver, or if we are going to switch to Silabs Aero II
or some other transceiver. If we produce a quadband modem that still uses
Rita, it will run exactly the same fw as the FCDEV3B thanks to the way we
define TSPACT signals for the RF_FAM=12 && CONFIG_TARGET_FCFAM combination,
and the current fcdev3b build target will be renamed to fcmodem. OTOH, if
that putative quadband modem will be Aero-based, then it will require a
different fw build target, the fcdev3b target will stay as it is, and the
two targets will both define CONFIG_TARGET_FCFAM and CONFIG_TARGET_FCMODEM,
but will have different RF_FAM numbers. But no matter which way we are
going to evolve, it is not right to have conditionals on CONFIG_TARGET_FCDEV3B
in places like ACI, and the present change clears the way for future
evolution.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Mon, 01 Apr 2019 01:05:24 +0000 |
parents | 93999a60b835 |
children |
line wrap: on
line source
/* +----------------------------------------------------------------------------- | Project : GSM-PS (6147) | Modul : PSA_MM +----------------------------------------------------------------------------- | Copyright 2002 Texas Instruments Berlin, AG | All rights reserved. | | This file is confidential and a trade secret of Texas | Instruments Berlin, AG | The receipt of or possession of this file does not convey | any rights to reproduce or disclose its contents or to | manufacture, use, or sell anything it may describe, in | whole, or in part, without the specific written consent of | Texas Instruments Berlin, AG. +----------------------------------------------------------------------------- | Purpose : This module defines the functions for the protocol | stack adapter for the registration part of mobility | management. +----------------------------------------------------------------------------- */ #ifndef PSA_MMF_C #define PSA_MMF_C #endif #include "aci_all.h" #undef TRACING /*==== INCLUDES ===================================================*/ #include "aci_cmh.h" #include "ati_cmd.h" #include "aci_cmd.h" #include "aci.h" #include "psa.h" #include "psa_mm.h" #include "psa_util.h" /*==== CONSTANTS ==================================================*/ #define ITM_WDT (14) /* item width in chars */ #define HDR_WDT (10) /* header width in chars */ /*==== TYPES ======================================================*/ /*==== EXPORT =====================================================*/ /*==== VARIABLES ==================================================*/ /*==== FUNCTIONS ==================================================*/ /* +-------------------------------------------------------------------+ | PROJECT : GSM-PS (6147) MODULE : PSA_MMF | | ROUTINE : psaMM_ClrPLMNLst | +-------------------------------------------------------------------+ PURPOSE : clears all entries for the PLMN list */ GLOBAL void psaMM_ClrPLMNLst ( void ) { int lstIdx; for( lstIdx = 0; lstIdx < MAX_PLMN_ID; lstIdx++ ) { mmShrdPrm.PLMNLst[lstIdx].v_plmn = INVLD_PLMN; mmShrdPrm.FRBLst[lstIdx] = NOT_PRESENT_8BIT; } } /* +-------------------------------------------------------------------+ | PROJECT : GSM-PS (6147) MODULE : PSA_MMF | | ROUTINE : psaMM_CpyPLMNLst | +-------------------------------------------------------------------+ PURPOSE : copies all used entries of a PLMN list into shared parameter area. */ GLOBAL void psaMM_CpyPLMNLst ( T_plmn * pPLMNLst, UBYTE * pFRBLst, USHORT * pLACLst) { int lstIdx; psaMM_ClrPLMNLst (); for( lstIdx = 0; lstIdx < MAX_PLMN_ID; lstIdx++ ) { if( pPLMNLst -> v_plmn EQ INVLD_PLMN ) break; mmShrdPrm.PLMNLst[lstIdx] = *pPLMNLst++; mmShrdPrm.FRBLst[lstIdx] = *pFRBLst++; mmShrdPrm.LACLst[lstIdx] = *pLACLst++; } } /* +-------------------------------------------------------------------+ | PROJECT : GSM-PS (6147) MODULE : PSA_MM | | ROUTINE : psaMM_Init | +-------------------------------------------------------------------+ PURPOSE : initialize the protocol stack adapter for MM. */ GLOBAL void psaMM_Init ( void ) { /* *------------------------------------------------------------------- * set default parms *------------------------------------------------------------------- */ mmShrdPrm.regStat = NO_VLD_RS; mmShrdPrm.regMode = DEF_REG_MODE; mmShrdPrm.regModeBeforeAbort = DEF_REG_MODE; mmShrdPrm.regModeAutoBack = FALSE; mmShrdPrm.srchRslt = NO_ENTRY; mmShrdPrm.deregCs = NO_ENTRY; mmShrdPrm.usedPLMN.v_plmn = INVLD_PLMN; mmShrdPrm.PLMNLst[0].v_plmn = INVLD_PLMN; mmShrdPrm.owner = OWN_NONE; mmShrdPrm.creg_status = CREG_STAT_NoSearch; mmShrdPrm.tz = INVLD_TZ; mmShrdPrm.PNNLst.plmn.v_plmn = INVLD_PLMN; mmShrdPrm.PNNLst.pnn_rec_num = 0; mmShrdPrm.PNNLst.next = NULL; mmShrdPrm.COPSmode = COPS_MOD_Auto; mmShrdPrm.COPSmodeBeforeAbort = COPS_MOD_Auto; mmShrdPrm.ActingHPLMN.v_plmn = INVLD_PLMN; /* temporary, because of the changes in psaSAT_BuildEnvCC(), this is necessary to pass the ACISAT test cases */ #ifdef _SIMULATION_ mmShrdPrm.lac = 0x0100; mmShrdPrm.cid = 0x0100; mmShrdPrm.usedPLMN.mcc[0] = 0x02; mmShrdPrm.usedPLMN.mcc[1] = 0x06; mmShrdPrm.usedPLMN.mcc[2] = 0x02; mmShrdPrm.usedPLMN.mnc[0] = 0x00; mmShrdPrm.usedPLMN.mnc[1] = 0x01; mmShrdPrm.usedPLMN.mnc[2] = 0x0F; #endif mmShrdPrm.slctPLMN.v_plmn = INVLD_PLMN; psaMM_ClrPLMNLst(); } /* +-------------------------------------------------------------------+ | PROJECT : GSM-PS (6147) MODULE : PSA_MMF | | ROUTINE : psaMM_shrPrmDump | +-------------------------------------------------------------------+ PURPOSE : this function dumps the shared parameter to the debug output. */ #ifdef TRACING GLOBAL void psaMM_shrPrmDump ( void ) { char lnBuf [80]; /* holds buffer for output line */ char mccBuf[SIZE_MCC + 1]; /* MCC converted to printable C-string */ char mncBuf[SIZE_MNC + 1]; /* MNC converted to printable C-string */ SHORT chrNr; /* holds number of processed chars */ SHORT cnt; /* holds a counter */ /* --- PLMN list ------------------------------------------------*/ for( cnt = 0; cnt<MAX_PLMN_ID AND mmShrdPrm.PLMNLst[cnt].v_plmn NEQ INVLD_PLMN; cnt++ ) { chrNr = sprintf( lnBuf, "%*.*s[%2d]", HDR_WDT, HDR_WDT, " PLMN list",cnt ); utl_BCD2String (mccBuf, mmShrdPrm.PLMNLst[cnt].mcc, SIZE_MCC); utl_BCD2String (mncBuf, mmShrdPrm.PLMNLst[cnt].mnc, SIZE_MNC); chrNr += sprintf( lnBuf+chrNr, "%*s %*s", ITM_WDT/2, ITM_WDT/2, mccBuf, mncBuf); TRACE_EVENT( lnBuf ); } /* --- used PLMN ------------------------------------------------*/ chrNr = sprintf( lnBuf, "%*.*s", HDR_WDT, HDR_WDT, " used PLMN" ); if( mmShrdPrm.usedPLMN.v_plmn EQ VLD_PLMN ) { utl_BCD2String (mccBuf, mmShrdPrm.usedPLMN.mcc, SIZE_MCC); utl_BCD2String (mncBuf, mmShrdPrm.usedPLMN.mnc, SIZE_MNC); chrNr += sprintf( lnBuf+chrNr, "%*s %*s", ITM_WDT/2, ITM_WDT/2, mccBuf, mncBuf); } else { chrNr += sprintf( lnBuf+chrNr, "%*s", ITM_WDT, "none" ); } TRACE_EVENT( lnBuf ); /* --- registration mode ----------------------------------------*/ chrNr = sprintf( lnBuf, "%*.*s", HDR_WDT, HDR_WDT, "rgstr mode" ); chrNr += sprintf( lnBuf+chrNr, "%*hd", ITM_WDT, mmShrdPrm.setPrm[0].regMode ); TRACE_EVENT( lnBuf ); /* --- registration status --------------------------------------*/ chrNr = sprintf( lnBuf, "%*.*s", HDR_WDT, HDR_WDT, "rgstr stat" ); chrNr += sprintf( lnBuf+chrNr, "%*hd", ITM_WDT, mmShrdPrm.regStat ); TRACE_EVENT( lnBuf ); /* --- search result --------------------------------------------*/ chrNr = sprintf( lnBuf, "%*.*s", HDR_WDT, HDR_WDT, " srch rslt" ); chrNr += sprintf( lnBuf+chrNr, "%*hd", ITM_WDT, mmShrdPrm.srchRslt ); TRACE_EVENT( lnBuf ); /* --- de-registration cause ------------------------------------*/ chrNr = sprintf( lnBuf, "%*.*s", HDR_WDT, HDR_WDT, "dereg caus" ); chrNr += sprintf( lnBuf+chrNr, "%*X", ITM_WDT, mmShrdPrm.deregCs ); TRACE_EVENT( lnBuf ); } #endif /* of #ifdef TRACING */ /*==== EOF ========================================================*/