FreeCalypso > hg > fc-magnetite

view src/aci2/bmi/bmi.mak @ 600:8f50b202e81f

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
board preprocessor conditionals: prep for more FC hw in the future This change eliminates the CONFIG_TARGET_FCDEV3B preprocessor symbol and all preprocessor conditionals throughout the code base that tested for it, replacing them with CONFIG_TARGET_FCFAM or CONFIG_TARGET_FCMODEM. These new symbols are specified as follows: CONFIG_TARGET_FCFAM is intended to cover all hardware designs created by Mother Mychaela under the FreeCalypso trademark. This family will include modem products (repackagings of the FCDEV3B, possibly with RFFE or even RF transceiver changes), and also my desired FreeCalypso handset product. CONFIG_TARGET_FCMODEM is intended to cover all FreeCalypso modem products (which will be firmware-compatible with the FCDEV3B if they use TI Rita transceiver, or will require a different fw build if we switch to one of Silabs Aero transceivers), but not the handset product. Right now this CONFIG_TARGET_FCMODEM preprocessor symbol is used to conditionalize everything dealing with MCSI. At the present moment the future of FC hardware evolution is still unknown: it is not known whether we will ever have any beyond-FCDEV3B hardware at all (contingent on uncertain funding), and if we do produce further FC hardware designs, it is not known whether they will retain the same FIC modem core (triband), if we are going to have a quadband design that still retains the classic Rita transceiver, or if we are going to switch to Silabs Aero II or some other transceiver. If we produce a quadband modem that still uses Rita, it will run exactly the same fw as the FCDEV3B thanks to the way we define TSPACT signals for the RF_FAM=12 && CONFIG_TARGET_FCFAM combination, and the current fcdev3b build target will be renamed to fcmodem. OTOH, if that putative quadband modem will be Aero-based, then it will require a different fw build target, the fcdev3b target will stay as it is, and the two targets will both define CONFIG_TARGET_FCFAM and CONFIG_TARGET_FCMODEM, but will have different RF_FAM numbers. But no matter which way we are going to evolve, it is not right to have conditionals on CONFIG_TARGET_FCDEV3B in places like ACI, and the present change clears the way for future evolution.
author Mychaela Falconia <falcon@freecalypso.org>
date Mon, 01 Apr 2019 01:05:24 +0000
parents 93999a60b835
children
line wrap: on
line source

#
#	Setting Directory for Layer4 Objects
#
TARID := bmi
OBJ := $(CONDAT_DIR)/obj/obj_$(TARID)

#INCLAYER4 = -I$(SRCMFW)  -I$(SRCACI)  -I$(SRCSMI) -I$(SRCKSD)
INCLAYER4 = -I$(SRCMFW)  -I$(SRCACI)  -I$(SRCSMI) -I$(SRCKSD) -I$(SRCMMS)

# must not be empty. set to "-D" for no local flags.
MY_OPTIONS = -D


SRCWAP=$(CONDAT_DIR)/ms/src/wapaus
SRCEZI=$(CONDAT_DIR)/ms/src/ezitxt
SRCCE=$(CONDAT_DIR)/ms/src/agfa
SRCATB=$(CONDAT_DIR)/ms/src/atb
COLOUR_MMI = 0 
# New editor. 1 -> Compile. 0 -> Don't compile, compile old editor.
NEWED = 1


#
# Sim application setting
#

ifeq ($(TK),1)
COPT1 += -dSIM_TOOLKIT
else
COPT1 += -uSIM_TOOLKIT
endif

ifeq ($(MELGEN),1)
COPT1 += -dMMI_MELODYGENERATOR
else
COPT1 += -uMMI_MELODYGENERATOR
endif

ifeq ($(GAME),1)
COPT1 += -dMMIGAME
else
COPT1 += -uMMIGAME
endif


ifeq ($(CHIMMI),1)
COPT1+= -dCHINESE_MMI
else
COPT1+= -uCHINESE_MMI
endif


ifeq ($(ETXT),1)
COPT1 += -dEASY_TEXT_ENABLED
else
COPT1 += -uEASY_TEXT_ENABLED
endif


ifeq ($(WAP),1)
COPT1 += -dMMI_WAP_ENABLED
else
COPT1 += -uMMI_WAP_ENABLED
endif

#
# Support for Homezone

ifeq ($(HZONE),1)
COPT1 += -dMMI_HOMEZONE_ENABLED
else
COPT1 += -uMMI_HOMEZONE_ENABLED
endif


#
# Support for UNICODE
#	

ifeq ($(UNIC),1)
COPT1 += -dNO_ASCIIZ
endif

#SPR890 - SH - Test mode menu
ifeq ($(MMITEST),1)
COPT1 += -dMMI_TEST_MODE
else
COPT1 += -uMMI_TEST_MODE
endif

#
# Support for GPRS
#
ifeq ($(PMODE),2)
COPT1 += -dMMI_GPRS_ENABLED
else
COPT1 += -uMMI_GPRS_ENABLED
endif

#
# Support for light version
#
#JVJ-SPR-1298. Provisional until a new option in the .inf file is inserted.

ifeq ($(SRVC),0)
COPT1 += -dMMI_LITE
else
COPT1 += -uMMI_LITE
endif


#
# Support for ENGINEERING MODE
#
ifeq ($(EM),1)
COPT1 += -dMMI_EM_ENABLED
else
COPT1 += -uMMI_EM_ENABLED
endif


#
# Support for Colour display
#	
ifeq ($(BOARD),41)
LSCREEN = 1
COLOUR_MMI = 1
endif

ifeq ($(BOARD),40)
LSCREEN = 1
COLOUR_MMI = 1
endif

ifeq ($(SRVC),0)
COLOUR_MMI = 0
endif

ifeq ($(LSCREEN),1)
COPT1 += -dLSCREEN
else
COPT1 += -uLSCREEN
endif


ifeq ($(COLOUR_MMI),1)
COPT1 += -dCOLOURDISPLAY
else
COPT1 += -uCOLOURDISPLAY
endif

#TTY settings
ifeq ($(FF_TTY),1)
COPT1 += -dMMI_TTY_ENABLED
else
COPT1 += -uMMI_TTY_ENABLED
endif

#
# Internal Phonebook
# Currently always on
#
COPT1 += -dINT_PHONEBOOK

# temporary addition for 2TO1 stack; the assumption is that 2.1.x and 3.1 don't
# use this makefile; 2.0 and 1.0 will be on the g23m branch; so it should be 
# safe to put the 2to1 related definition here without enclosing them within 
# conditions

COPT1 += -dFF_2TO1_PS
#
# New editor (SPR#1428 - SH)
#
ifeq ($(NEWED),1)
COPT1 += -dNEW_EDITOR
else
COPT1 += -uNEW_EDITOR
endif

COREOBJ = $(OBJ)/MmiCall.$(OBJ_TAIL) \
                $(OBJ)/MmiResources.$(OBJ_TAIL) \
                $(OBJ)/MmiBlkLangDB.$(OBJ_TAIL) \
                $(OBJ)/MmiBlkManager.$(OBJ_TAIL) \
                $(OBJ)/MmiBlkResources.$(OBJ_TAIL) \
                $(OBJ)/MmiBookCallDetailsWindow.$(OBJ_TAIL) \
                $(OBJ)/MmiBookCallListWindow.$(OBJ_TAIL) \
                $(OBJ)/MmiBookController.$(OBJ_TAIL) \
                $(OBJ)/MmiBookDetailsWindow.$(OBJ_TAIL) \
                $(OBJ)/MmiBookMenuWindow.$(OBJ_TAIL) \
                $(OBJ)/MmiBookPhonebook.$(OBJ_TAIL) \
                $(OBJ)/MmiBookSDNWindow.$(OBJ_TAIL) \
                $(OBJ)/MmiBookSearchWindow.$(OBJ_TAIL) \
                $(OBJ)/MmiBookServices.$(OBJ_TAIL) \
                $(OBJ)/MmiBookShared.$(OBJ_TAIL) \
                $(OBJ)/MmiBookUtils.$(OBJ_TAIL) \
		$(OBJ)/MmiDialogs.$(OBJ_TAIL) \
		$(OBJ)/MmiDummy.$(OBJ_TAIL) \
		$(OBJ)/MmiIcons.$(OBJ_TAIL) \
		$(OBJ)/MmiIdle.$(OBJ_TAIL) \
		$(OBJ)/MmiLists.$(OBJ_TAIL) \
		$(OBJ)/MmiLists2.$(OBJ_TAIL) \
		$(OBJ)/MmiMain.$(OBJ_TAIL) \
		$(OBJ)/MmiMenu.$(OBJ_TAIL) \
		$(OBJ)/MmiMmi.$(OBJ_TAIL) \
		$(OBJ)/MmiNetwork.$(OBJ_TAIL) \
		$(OBJ)/MmiPins.$(OBJ_TAIL) \
		$(OBJ)/MmiServices.$(OBJ_TAIL) \
		$(OBJ)/MmiSettings.$(OBJ_TAIL) \
		$(OBJ)/MmiSmsBroadcast.$(OBJ_TAIL) \
		$(OBJ)/MmiSounds.$(OBJ_TAIL) \
		$(OBJ)/MmiSmsIdle.$(OBJ_TAIL) \
		$(OBJ)/MmiSmsMenu.$(OBJ_TAIL) \
		$(OBJ)/MmiSmsSend.$(OBJ_TAIL) \
		$(OBJ)/MmiSmsRead.$(OBJ_TAIL) \
		$(OBJ)/MmiSoftkeys.$(OBJ_TAIL) \
		$(OBJ)/MmiStart.$(OBJ_TAIL) \
                $(OBJ)/MmiTimeDate.$(OBJ_TAIL) \
                $(OBJ)/MmiUserData.$(OBJ_TAIL)\
		$(OBJ)/MmiSatcall.$(OBJ_TAIL) \
		$(OBJ)/MmiSatinfo.$(OBJ_TAIL) \
		$(OBJ)/MmiSatinput.$(OBJ_TAIL) \
		$(OBJ)/MmiSatmenu.$(OBJ_TAIL) \
		$(OBJ)/MmiSimtoolkit.$(OBJ_TAIL) \
		$(OBJ)/MmiVoiceMemo.$(OBJ_TAIL)\
		$(OBJ)/MmiCalculatorMain.$(OBJ_TAIL) \
		$(OBJ)/MmiMelody_data.$(OBJ_TAIL) \
		$(OBJ)/MmiTimers.$(OBJ_TAIL) \
		$(OBJ)/MmiAoc.$(OBJ_TAIL) \
		$(OBJ)/MmiCPHS.$(OBJ_TAIL) \
		$(OBJ)/MmiBand.$(OBJ_TAIL) \
		$(OBJ)/MmiSatClassE.$(OBJ_TAIL) \

BMIOBJ = $(COREOBJ)

ifeq ($(NEWED),1)
NEWEDOBJ =	$(OBJ)/AUIEditor.$(OBJ_TAIL)\
		$(OBJ)/AUISymbol.$(OBJ_TAIL)\
		$(OBJ)/AUITextEntry.$(OBJ_TAIL)\
		$(OBJ)/AUICalcEditor.$(OBJ_TAIL)\
		$(OBJ)/AUIPINEditor.$(OBJ_TAIL)
else
NEWEDOBJ += $(OBJ)/MmiBookInputWindow.$(OBJ_TAIL) \
		$(OBJ)/MmiEditor.$(OBJ_TAIL)
endif
BMIOBJ += $(NEWEDOBJ)
EXTRAOBJ += $(NEWEDOBJ)
		
		
ifeq ($(HZONE),1)
BMIOBJ +=	$(OBJ)/MmiHomezone.$(OBJ_TAIL)
EXTRAOBJ +=	$(OBJ)/MmiHomezone.$(OBJ_TAIL)
endif

# aka GPRS
ifeq ($(PMODE),2)
BMIOBJ +=	$(OBJ)/MmiGprs.$(OBJ_TAIL)
EXTRAOBJ +=	$(OBJ)/MmiGprs.$(OBJ_TAIL)
endif

ifeq ($(EM),1)
BMIOBJ +=	$(OBJ)/MmiEm.$(OBJ_TAIL)
EXTRAOBJ +=	$(OBJ)/MmiEm.$(OBJ_TAIL)
endif
	
ifeq ($(ETXT),1)
BMIOBJ += 	$(OBJ)/MmiDictionary.$(OBJ_TAIL)
EXTRAOBJ += 	$(OBJ)/MmiDictionary.$(OBJ_TAIL)
# SH - Only compile MmiLatinPredText.c if new editor is switched OFF
ifeq ($(NEWED),0)
BMIOBJ +=	$(OBJ)/MmiLatinPredText.$(OBJ_TAIL)
EXTRAOBJ +=	$(OBJ)/MmiLatinPredText.$(OBJ_TAIL)
endif
endif

ifeq ($(CHIMMI),1)
BMIOBJ += $(OBJ)/MmiChineseInput.$(OBJ_TAIL)
EXTRAOBJ += $(OBJ)/MmiChineseInput.$(OBJ_TAIL)
endif

ifeq ($(MELGEN),1)
BMIOBJ += 	$(OBJ)/MmiMelodygeneratorMain.$(OBJ_TAIL)
EXTRAOBJ += 	$(OBJ)/MmiMelodygeneratorMain.$(OBJ_TAIL)
endif

ifeq ($(GAME),1)
BMIOBJ += 	$(OBJ)/Mmigame.$(OBJ_TAIL)
EXTRAOBJ += 	$(OBJ)/Mmigame.$(OBJ_TAIL)
endif

ifeq ($(WAP),1)
BMIWAPOBJ =	$(OBJ)/wap_codec.$(OBJ_TAIL)
EXTRAOBJ +=	$(OBJ)/wap_codec.$(OBJ_TAIL)

WAPOBJ =	$(OBJ)/MmiWapFfs.$(OBJ_TAIL) \
		$(OBJ)/ATBWapAUI.$(OBJ_TAIL) \
		$(OBJ)/ATBWapACI.$(OBJ_TAIL) \
		$(OBJ)/AUIWap.$(OBJ_TAIL)
BMIOBJ += $(WAPOBJ)
EXTRAOBJ += $(WAPOBJ)
endif
		
#
# Creating bmi.lib
#
# Note: AR reached its limit in terms of command line length so we need to 
# split the creation of $(BMI_LIB) into 2 steps: initial creation of a new 
# library; then separate addition of "extra" objects. There are therefore 
# 2 groups of objects - one for compilation (BMIOBJ/BMIWAPOBJ), and one for 
# archiving (COREOBJ/EXTRAOBJ). AR does allow a 'command file' to be used 
# instead of the command line; however, this has its own file formatting 
# requirements and line length limits (neither of which are very clear) and
# there is no ready access to individual object file names, so the 
# "COREOBJ/EXTRAOBJ" method is used - for now. Something similar is done in 
# the ACI.

$(TOP_DIR)/$(BMI_LIB) : $(OBJ) $(COREOBJ) $(EXTRAOBJ)
	-$(PERL) $(CONDAT_DIR)/int/bin/make_ver.pl
	@cp ver.$(OBJ_TAIL) $(subst /,$(SLASH),$(OBJ)/ver.$(OBJ_TAIL))
	cd $(subst /,$(SLASH),$(OBJ)) $(DELIMITER) $(AR) r $(TOP_DIR)/$(BMI_LIB) $(patsubst $(OBJ)/%,%,$(COREOBJ))
	cd $(subst /,$(SLASH),$(OBJ)) $(DELIMITER) $(AR) r $(TOP_DIR)/$(BMI_LIB) $(patsubst $(OBJ)/%,%,$(EXTRAOBJ) ver.$(OBJ_TAIL))

$(OBJ):	
	mkdir $(subst /,$(SLASH),$(OBJ))
	
clean: 
	$(REMOVE) $(subst /,$(SLASH),$(OBJ))

$(BMIOBJ): $(OBJ)/%.$(OBJ_TAIL) : $(SRCBMI)/%.c
	echo -D$(NCONFIG) >  cmd
#HHV: Added FF_SAT_E for compilation of BMI. Must be removed after TCS4 merge!!!
	echo -DFF_SAT_E >> cmd
#	echo $(MY_OPTIONS) >> cmd
	echo -D$(NTRACE) >> cmd
	echo -D$(NWARN) >> cmd
	echo -DTRGT_G23 >> cmd
	echo -DAUS_CONDAT_TYPE_PORTING >> cmd
	echo -DUSE_WIP_MALLOC >> cmd
	echo $(COPT) >> cmd
	echo $(COPT1) >> cmd
	echo $(COTAR) >> cmd
	echo $(FDOPT) >> cmd
	echo $(INCDRV1) >> cmd
	echo -I$(ICOM) >> cmd
	echo $(INCDRV2) >> cmd
	echo -I$(ICDG) >> cmd
	echo -I$(IAUS) >> cmd
	echo -I$(IGLE) >> cmd
	echo -I$(IAUSC) >> cmd
	echo -I$(SRCWAP) >> cmd
	echo -I$(SRCATB) >> cmd
	echo -I$(TOP_DIR)/zi/include >> cmd
	echo $(INCLAYER4) >> cmd
	echo -I$(SRCACIEXT) >> cmd
	echo -I$(SRCACIDTI) >> cmd
	echo -fr$(OBJ) >> cmd
	$(CC_PRE) $^ -@cmd
	$(CC_INT) $(addsuffix .pp,$(basename $^))
	$(CC_COM) $(addsuffix .pp_,$(basename $^)) -@cmd

$(BMIWAPOBJ): $(OBJ)/%.$(OBJ_TAIL) : $(SRCWAP)/%.c
	echo -D$(NCONFIG) >  cmd
#	echo $(MY_OPTIONS) >> cmd
	echo -D$(NTRACE) >> cmd
	echo -D$(NWARN) >> cmd
	echo -DTRGT_G23 >> cmd
	echo -DAUS_CONDAT_TYPE_PORTING >> cmd
	echo $(COPT) >> cmd
	echo $(COPT1) >> cmd
	echo $(COTAR) >> cmd
	echo $(FDOPT) >> cmd
	echo $(INCDRV1) >> cmd
	echo -I$(ICOM) >> cmd
	echo $(INCDRV2) >> cmd
	echo -I$(ICDG) >> cmd
	echo -I$(IAUS) >> cmd
	echo -I$(IAUSC) >> cmd
	echo -I$(IGLE) >> cmd
	echo -I$(SRCWAP) >> cmd
	echo -I$(SRCATB) >> cmd
	echo $(INCLAYER4) >> cmd
	echo -I$(SRCACIEXT) >> cmd
	echo -I$(SRCACIDTI) >> cmd
	echo -fr$(OBJ) >> cmd
	$(CC_PRE) $^ -@cmd
	$(CC_INT) $(addsuffix .pp,$(basename $^))
	$(CC_COM) $(addsuffix .pp_,$(basename $^)) -@cmd

# files to be added for MMS
# $(OBJ)/MmiMMSMenu.$(OBJ_TAIL) \
# $(OBJ)/MmiEMSCreate.$(OBJ_TAIL) \
# $(OBJ)/MmiMMSCreate.$(OBJ_TAIL) \
# $(OBJ)/MmiMMSBox.$(OBJ_TAIL) \
# $(OBJ)/Auiwapmms.$(OBJ_TAIL) \
# $(OBJ)/MmiMMSom.$(OBJ_TAIL) \
# $(OBJ)/MmiWindow.$(OBJ_TAIL) \
# $(OBJ)/MmiMmsSetting.$(OBJ_TAIL) 
# $(OBJ)/AUIWap.$(OBJ_TAIL)\
# $(OBJ)/AUIWapPush.$(OBJ_TAIL)
# $(OBJ)/MmiMP3Test.$(OBJ_TAIL)