FreeCalypso > hg > fc-magnetite
view src/aci2/bmi/mmiSmsMenu.h @ 600:8f50b202e81f
board preprocessor conditionals: prep for more FC hw in the future
This change eliminates the CONFIG_TARGET_FCDEV3B preprocessor symbol and
all preprocessor conditionals throughout the code base that tested for it,
replacing them with CONFIG_TARGET_FCFAM or CONFIG_TARGET_FCMODEM. These
new symbols are specified as follows:
CONFIG_TARGET_FCFAM is intended to cover all hardware designs created by
Mother Mychaela under the FreeCalypso trademark. This family will include
modem products (repackagings of the FCDEV3B, possibly with RFFE or even
RF transceiver changes), and also my desired FreeCalypso handset product.
CONFIG_TARGET_FCMODEM is intended to cover all FreeCalypso modem products
(which will be firmware-compatible with the FCDEV3B if they use TI Rita
transceiver, or will require a different fw build if we switch to one of
Silabs Aero transceivers), but not the handset product. Right now this
CONFIG_TARGET_FCMODEM preprocessor symbol is used to conditionalize
everything dealing with MCSI.
At the present moment the future of FC hardware evolution is still unknown:
it is not known whether we will ever have any beyond-FCDEV3B hardware at all
(contingent on uncertain funding), and if we do produce further FC hardware
designs, it is not known whether they will retain the same FIC modem core
(triband), if we are going to have a quadband design that still retains the
classic Rita transceiver, or if we are going to switch to Silabs Aero II
or some other transceiver. If we produce a quadband modem that still uses
Rita, it will run exactly the same fw as the FCDEV3B thanks to the way we
define TSPACT signals for the RF_FAM=12 && CONFIG_TARGET_FCFAM combination,
and the current fcdev3b build target will be renamed to fcmodem. OTOH, if
that putative quadband modem will be Aero-based, then it will require a
different fw build target, the fcdev3b target will stay as it is, and the
two targets will both define CONFIG_TARGET_FCFAM and CONFIG_TARGET_FCMODEM,
but will have different RF_FAM numbers. But no matter which way we are
going to evolve, it is not right to have conditionals on CONFIG_TARGET_FCDEV3B
in places like ACI, and the present change clears the way for future
evolution.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Mon, 01 Apr 2019 01:05:24 +0000 |
parents | 93999a60b835 |
children |
line wrap: on
line source
#ifndef _DEF_MMI_SMSMENU_H_ #define _DEF_MMI_SMSMENU_H_ /******************************************************************************* CONDAT (UK) ******************************************************************************** This software product is the property of Condat (UK) Ltd and may not be disclosed to any third party without the express permission of the owner. ******************************************************************************** $Project name: Basic MMI $Project code: BMI (6349) $Module: SMS $File: mmiSmsMenu.h $Revision: 1.0 $Author: Condat(UK) $Date: 25/10/00 ******************************************************************************** Description: header of template for MMI SMS menu dynamic event handling ******************************************************************************** $History: mmiSmsMenu.h 25/10/00 Original Condat(UK) BMI version. $End *******************************************************************************/ #undef GLOBAL_EXT #if defined (MMI_SMSMENU_C) #define GLOBAL_EXT #else #define GLOBAL_EXT extern #endif #include "mfw_mfw.h" #define TIMER_EXIT 0x0BB8 /* Default SMS timer period - 3 secs. */ #define SHORT_SECS 0x01F4 /* Information dialogue display times. */ #define THREE_SECS 0x0BB8 /* 3000 milliseconds. */ #define FIVE_SECS 0x1388 /* 5000 milliseconds. */ #define TEN_SECS 0x2710 /* 10000 milliseconds. */ #define TWO_MIN 0x1D4C0 /* 2 min */ #define FOREVER 0xFFFF /* Infinite time period. */ /* This structure must be used by the different modules to pass parameters for SMS sending */ typedef struct { UBYTE TextBuffer[MAX_MSG_LEN_ARRAY]; UBYTE NumberBuffer[NUMBER_LENGTH]; UBYTE CentreBuffer[NUMBER_LENGTH]; /* FTA 34.2.8 we have to know from where we are calling the sms sending part. We should use the Service CenterNumber from the Caller in the case of REPLYING */ UBYTE called_from_reply_item; } T_SmsUserData; // Entry points for the different SMS blocs GLOBAL_EXT int M_exeSendNew(MfwMnu* m, MfwMnuItem* i); GLOBAL_EXT int M_exeRead(MfwMnu* m, MfwMnuItem* i); GLOBAL_EXT int M_exeDelAll(MfwMnu* m, MfwMnuItem* i); GLOBAL_EXT int M_exeSendSaved(MfwMnu* m, MfwMnuItem* i); GLOBAL_EXT int M_exeVoice(MfwMnu* m, MfwMnuItem* i); /*SPR 1920 removed obsolete function*/ // Dialog window callback function GLOBAL_EXT void SmsMenu_loadDialogDefault(T_DISPLAY_DATA * DisplayInfo); int voice_mail_init (void); /*************************************************** **** **** **** DUMMY DECLARATIONS **** **** **** ***************************************************/ //Dummy defines #define TxtNotReady 1 #define TxtNotDeleted 2 #define TxtAllDeleted 3 #define TxtEnterVoiceNumber 4 //Dummy functions (stubs) void SmsRead(void); // RAVI void call_voice(void); // RAVI void sms_send(T_SmsUserData *); int sms_get_ready_state(void); // RAVI int newSmsMenu_Start(MfwMnu* m, MfwMnuItem* i); int ExeSms_sendM_SND(MfwMnu *, MfwMnuItem *); int ExeM_SND(MfwMnu *, MfwMnuItem *); /* SPR#1428 - SH - New Editor: These functions moved here from MmiEditor.c */ #ifdef NEW_EDITOR #ifdef EASY_TEXT_ENABLED int showeZiTextIcon(MfwMnu* m, MfwMnuItem* i); int Easy_Activate(MfwMnu* m, MfwMnuItem* i); int Easy_DeActivate(MfwMnu* m, MfwMnuItem* i); #endif /* EASY_TEXT_ENABLED */ //API - 01/10/02 - Concatenation Switch Function Definition int Concatenate_DeActivate(MfwMnu* m, MfwMnuItem* i); int Concatenate_Activate(MfwMnu* m, MfwMnuItem* i); int Concatenate_Status(MfwMnu* m, MfwMnuItem* i); #endif /* NEW_EDITOR */ #endif /* _DEF_MMI_SMSMENU_H_ */