FreeCalypso > hg > fc-magnetite
view src/cs/layer1/cfile/l1_ctl.c @ 600:8f50b202e81f
board preprocessor conditionals: prep for more FC hw in the future
This change eliminates the CONFIG_TARGET_FCDEV3B preprocessor symbol and
all preprocessor conditionals throughout the code base that tested for it,
replacing them with CONFIG_TARGET_FCFAM or CONFIG_TARGET_FCMODEM. These
new symbols are specified as follows:
CONFIG_TARGET_FCFAM is intended to cover all hardware designs created by
Mother Mychaela under the FreeCalypso trademark. This family will include
modem products (repackagings of the FCDEV3B, possibly with RFFE or even
RF transceiver changes), and also my desired FreeCalypso handset product.
CONFIG_TARGET_FCMODEM is intended to cover all FreeCalypso modem products
(which will be firmware-compatible with the FCDEV3B if they use TI Rita
transceiver, or will require a different fw build if we switch to one of
Silabs Aero transceivers), but not the handset product. Right now this
CONFIG_TARGET_FCMODEM preprocessor symbol is used to conditionalize
everything dealing with MCSI.
At the present moment the future of FC hardware evolution is still unknown:
it is not known whether we will ever have any beyond-FCDEV3B hardware at all
(contingent on uncertain funding), and if we do produce further FC hardware
designs, it is not known whether they will retain the same FIC modem core
(triband), if we are going to have a quadband design that still retains the
classic Rita transceiver, or if we are going to switch to Silabs Aero II
or some other transceiver. If we produce a quadband modem that still uses
Rita, it will run exactly the same fw as the FCDEV3B thanks to the way we
define TSPACT signals for the RF_FAM=12 && CONFIG_TARGET_FCFAM combination,
and the current fcdev3b build target will be renamed to fcmodem. OTOH, if
that putative quadband modem will be Aero-based, then it will require a
different fw build target, the fcdev3b target will stay as it is, and the
two targets will both define CONFIG_TARGET_FCFAM and CONFIG_TARGET_FCMODEM,
but will have different RF_FAM numbers. But no matter which way we are
going to evolve, it is not right to have conditionals on CONFIG_TARGET_FCDEV3B
in places like ACI, and the present change clears the way for future
evolution.
| author | Mychaela Falconia <falcon@freecalypso.org> |
|---|---|
| date | Mon, 01 Apr 2019 01:05:24 +0000 |
| parents | af1bacf61dc6 |
| children |
line wrap: on
line source
/************* Revision Controle System Header ************* * GSM Layer 1 software * L1_CTL.C * * Filename l1_ctl.c * Copyright 2003 (C) Texas Instruments * ************* Revision Controle System Header *************/ #define L1_CTL_C #include "l1_macro.h" #include "l1_confg.h" #if (CODE_VERSION == SIMULATION) #include <string.h> #include "l1_types.h" #include "sys_types.h" #include "l1_const.h" #include "l1_time.h" #include "l1_signa.h" #if TESTMODE #include "l1tm_defty.h" #endif #if (AUDIO_TASK == 1) #include "l1audio_const.h" #include "l1audio_cust.h" #include "l1audio_signa.h" #include "l1audio_defty.h" #include "l1audio_msgty.h" #endif #if (L1_GTT == 1) #include "l1gtt_const.h" #include "l1gtt_defty.h" #endif #if (L1_MP3 == 1) #include "l1mp3_defty.h" #endif #if (L1_MIDI == 1) #include "l1midi_defty.h" #endif //ADDED FOR AAC #if (L1_AAC == 1) #include "l1aac_defty.h" #endif #include "l1_defty.h" #include "cust_os.h" #include "l1_msgty.h" #include "l1_varex.h" #include "l1_proto.h" #include "l1_mftab.h" #include "l1_tabs.h" #include "l1_ver.h" #if L2_L3_SIMUL #include "hw_debug.h" #endif #if TESTMODE #include "l1tm_msgty.h" #include "l1tm_varex.h" #endif #include "l1_ctl.h" #ifdef _INLINE #define INLINE static inline // Inline functions when -v option is set #else // when the compiler is ivoked. #define INLINE #endif #else #include <string.h> #include "l1_types.h" #include "sys_types.h" #include "l1_const.h" #include "l1_time.h" #include "l1_signa.h" #if (RF_FAM == 61) #include "tpudrv61.h" #endif #if TESTMODE #include "l1tm_defty.h" #endif #if (AUDIO_TASK == 1) #include "l1audio_const.h" #include "l1audio_cust.h" #include "l1audio_defty.h" #endif #if (L1_GTT == 1) #include "l1gtt_const.h" #include "l1gtt_defty.h" #endif #if (L1_MP3 == 1) #include "l1mp3_defty.h" #endif #if (L1_MIDI == 1) #include "l1midi_defty.h" #endif //ADDED FOR AAC #if (L1_AAC == 1) #include "l1aac_defty.h" #endif #include "l1_defty.h" #include "cust_os.h" #include "l1_msgty.h" #include "l1_varex.h" #include "l1_proto.h" #include "l1_tabs.h" #include "l1_ctl.h" #if L2_L3_SIMUL #include "hw_debug.h" #endif #if TESTMODE #include "l1tm_msgty.h" #include "l1tm_varex.h" #endif #ifdef _INLINE #define INLINE static inline // Inline functions when -v option is set #else // when the compiler is ivoked. #define INLINE #endif #endif #if(RF_FAM == 61) #include "l1_rf61.h" #endif #if (TRACE_TYPE == 1) || (TRACE_TYPE == 4) #include "l1_trace.h" #endif extern SYS_UWORD16 Convert_l1_radio_freq(SYS_UWORD16 radio_freq); #if(RF_FAM == 61) extern WORD16 drp_gain_correction(UWORD16 arfcn, UWORD8 lna_off, UWORD16 agc); #endif #define LNA_OFF 1 #define LNA_ON 0 /************************************/ /* Automatic frequency compensation */ /************************************/ /* * FreeCalypso TCS211 reconstruction: the following 3 functions * have been added in the LoCosto version of this module. * We have conditioned them out in order to match the original * TCS211 object; their uses have been conditioned out as well. * * These functions will need to re-enabled when their uses are * re-enabled. */ #if 0 #define L1_WORD16_POS_MAX (32767) #define L1_WORD16_NEG_MAX (-32768) #define L1_WORD32_POS_MAX ((unsigned long)(1<<31)-1) #define L1_WORD32_NEG_MAX (-(unsigned long)(1<<31)) INLINE WORD16 Add_Sat_sign_16b(WORD16 val1, WORD16 val2) { WORD32 temp; WORD16 result; temp = (WORD32)((WORD32)val1 + (WORD32)val2); if(temp > L1_WORD16_POS_MAX) { temp = L1_WORD16_POS_MAX; } if(temp < L1_WORD16_NEG_MAX) { temp = L1_WORD16_NEG_MAX; } result = (WORD16)((temp)&(0x0000FFFF)); return(result); } INLINE WORD32 Add_Sat_sign_32b(WORD32 val1, WORD32 val2) { WORD32 temp_high_high; UWORD32 temp_low_low; UWORD16 carry; WORD32 result; WORD16 high_val1, high_val2; UWORD16 low_val1, low_val2; high_val1 = (WORD16)(val1>>16); high_val2 = (WORD16)(val2>>16); low_val1 = (UWORD16)(val1&0x0000FFFF); low_val2 = (UWORD16)(val2&0x0000FFFF); temp_high_high = (WORD32)high_val1 + (WORD32)high_val2; temp_low_low = (UWORD32)low_val1 + (UWORD32)low_val2; carry = (UWORD16)(temp_low_low >> 16); temp_high_high = temp_high_high + (UWORD32)(carry); result = val1 + val2; if(temp_high_high > L1_WORD16_POS_MAX) { result = L1_WORD32_POS_MAX; } if(temp_high_high < L1_WORD16_NEG_MAX) { result = L1_WORD32_NEG_MAX; } return(result); } INLINE WORD32 Sat_Mult_20sign_16unsign(WORD32 val1, UWORD32 val2) { WORD32 result; result = val1 * val2; if(val1>0) /* val2 is > 0*/ { if(result < 0) /* overflow */ { result = L1_WORD32_POS_MAX; } } if(val1<0) /* val2 is > 0*/ { if(result > 0) /* overflow */ { result = L1_WORD32_NEG_MAX; } } return(result); } #endif INLINE WORD32 Add_40b( WORD32 guard1guard2, WORD32 lvar1, WORD32 lvar2, WORD16 *guardout ) { WORD32 result, temp, carry, Lvar1, Lvar2; WORD16 guard1,guard2; guard1=(WORD16) ((WORD32) guard1guard2>>16); guard2=(WORD16) guard1guard2; /* lvar1 and lvar2 are both 48 bits variables */ /* We 1st add the low parts of lvar1 and lvar2 and we give */ /* a 32 bits result and a carry if needed */ Lvar1 = (UWORD16)lvar1; Lvar2 = (UWORD16)lvar2; temp = Lvar1 + Lvar2; carry = temp >> 16; result = temp & 0x0000ffffL; /* We now add the two high parts of var1 and var2 (scaled */ /* to a 16 bits format) and carry (if any) and we give a */ /* 48 bits results. */ Lvar1 = (UWORD32)lvar1 >> 16; Lvar2 = (UWORD32)lvar2 >> 16; temp = Lvar1 + Lvar2 + carry; carry = (UWORD32)temp >> 16; temp = (UWORD32)temp << 16; result = result | temp; temp = guard1 + guard2 + carry; *guardout = (WORD16)temp; return( result ); } INLINE WORD32 Mult_40b(WORD32 var1, WORD16 var2, WORD16 *guardout) { WORD32 mult,guard1guard2; WORD32 aux1; UWORD32 aux2; WORD16 neg_flag=0; WORD32 var1_low_nosign,var2_nosign; if (var2<0) { var2=-var2; neg_flag=1; } /*aux1 = AccHigh(var1)*var2 */ aux1 = (WORD32)(var1>>16) * (WORD32)var2; /* 16 bits * 16 bits -> 32 bits result */ /*aux2 = AccLow(var1)*var2 (unsigned multiplication) */ /* Performs the sign suppression of the words */ var1_low_nosign = (UWORD16)var1; var2_nosign = (UWORD16) var2; aux2 = (UWORD32)var1_low_nosign * (UWORD32)var2_nosign; /*Shift aux1=F48 of 16 bit left */ guard1guard2=aux1&0xFFFF0000L;/*guard1=(WORD16)(aux1>>16)*/ /*guard2=0x0000 */ aux1=aux1<<16; /* ((var1_high*var2)<<16) +(var1_low*var2) = aux1 + aux2 */ /* aux1 and aux2 are both 48 bits variables */ /* We first add the low pats of aux1 and aux2 and we give*/ /* a 32 bits result and a carry if needed */ mult=Add_40b(guard1guard2,aux1,aux2,guardout ); if (neg_flag) { mult=-mult; if (*guardout!=0) *guardout=-(*guardout)-1; else *guardout=-1; } return(mult); } /***********************************************************************/ /* This function allows to multiply a WORD32 and a WORD16, both POSITIVE, */ /* variables. Result is WORD32. */ /***********************************************************************/ INLINE WORD32 UMult_40b(WORD32 var1, WORD16 var2, WORD16 *guardout) { WORD32 mult,guard1guard2; UWORD32 aux1,aux2; WORD32 var1_high_nosign,var1_low_nosign,var2_nosign; /*aux1 = AccHigh(var1)*var2 (unsigned multiplication) */ /* Performs the sign suppression of the words */ var1_high_nosign = (UWORD32)var1>>16; var2_nosign = (UWORD16) var2; aux1 = (UWORD32)var1_high_nosign * (UWORD32)var2_nosign; /*aux2 = AccLow(var1)*var2 (unsigned multiplication) */ /* Performs the sign suppression of the words */ var1_low_nosign = (WORD32)((UWORD16)var1); aux2 = (UWORD32)var1_low_nosign * (UWORD32)var2_nosign; /*Shift aux1=F48 of 16 bit left */ guard1guard2=aux1&0xFFFF0000L;/*guard1=(WORD16)(aux1>>16)*/ /*guard2=0x0000 */ aux1=aux1<<16; /* ((var1_high*var2)<<16) +(var1_low*var2) = aux1 + aux2 */ mult=Add_40b(guard1guard2,aux1,aux2,guardout); return(mult); } /*-------------------------------------------------------*/ /* l1ctl_afc() */ /*-------------------------------------------------------*/ /* Parameters : */ /* Return : */ /* Functionality : */ /*-------------------------------------------------------*/ #if (VCXO_ALGO == 0) WORD16 l1ctl_afc (UWORD8 phase, UWORD32 *frame_count, WORD16 angle, WORD32 snr, UWORD16 radio_freq) #else WORD16 l1ctl_afc (UWORD8 phase, UWORD32 *frame_count, WORD16 angle, WORD32 snr, UWORD16 radio_freq, UWORD32 l1_mode) #endif { /*************************/ /* Variables declaration */ /*************************/ WORD16 i=0; UWORD32 denom; /* F12.20 */ WORD32 var_32,num,Phi_32=0,var1,var2,guard1guard2; static UWORD32 P=C_cov_start; /* F12.20 */ static WORD32 Psi=0; /* F13.19 */ static WORD16 Psi_quant[C_N_del+1]; /* F13.3 */ WORD16 var_16; WORD16 Phi=0; /* F1.15 */ WORD16 quotient,guard1,guard2,guardout; UWORD32 LGuard; WORD16 denomH,denomH_3msb; UWORD32 K=0; /* algo 1 */ static WORD16 old_Psi_quant[C_N_del+1]; static WORD32 old_Psi=0; #if (VCXO_ALGO == 1) static WORD32 psi_past[C_N_del+1]; /* F13.19 */ static WORD16 psi_quant; /* F13.3 */ static WORD16 quant_avg; static UWORD32 M_Count; static WORD32 psi_avg[C_PSI_AVG_SIZE_D+1]; // Data history array static WORD16 B_Count; // Counter for consecutive SNR below C_thr_snr #if 0 /* LoCosto added var */ UWORD16 L = 10433; // Gain algo2 #endif static UWORD16 first_avg; static UWORD16 good_snr; /* to be able to keep in memory the old AFC variables in case of spurious FB detection */ static WORD32 old_psi_past[C_N_del+1]; /* F13.19 */ static WORD16 old_psi_quant; /* F13.3 */ #endif #if (L1_FF_MULTIBAND == 1) UWORD8 physical_band_id; #endif #if 0 /* LoCosto added var init */ //Set AFC close loop gain for ALGO_AFC_LQG_PREDICTOR. if(l1_mode==I_MODE)//MS is in Idle mode L = 41732; //F0.20 L=41732/2^20 = 0.04 else //All other modes than Idle L = 10433; //F0.20 L=10433/2^20 = 0.01 #endif #if (L1_FF_MULTIBAND == 0) if (((l1_config.std.id == DUAL) || (l1_config.std.id == DUALEXT) || (l1_config.std.id == DUAL_US)) && #if (VCXO_ALGO == 1) ((phase != AFC_INIT_CENTER) || (phase != AFC_INIT_MIN) || (phase != AFC_INIT_MAX))) #else (phase != AFC_INIT)) #endif { if (radio_freq >= l1_config.std.first_radio_freq_band2) { angle = (angle + 1) >> 1; } } else if (((l1_config.std.id == DCS1800) || (l1_config.std.id == PCS1900)) && #if (VCXO_ALGO == 1) ((phase != AFC_INIT_CENTER) || (phase != AFC_INIT_MIN) || (phase != AFC_INIT_MAX))) #else (phase != AFC_INIT)) #endif { angle = (angle + 1) >> 1; } #else // L1_FF_MULTIBAND = 1 below #if (VCXO_ALGO == 1) if((phase != AFC_INIT_CENTER) || (phase != AFC_INIT_MIN) || (phase != AFC_INIT_MAX)) #else if(phase != AFC_INIT) #endif { physical_band_id = l1_multiband_radio_freq_convert_into_physical_band_id(radio_freq); if( (multiband_rf[physical_band_id].gsm_band_identifier == DCS1800) || (multiband_rf[physical_band_id].gsm_band_identifier == PCS1900)) { angle = (angle + 1) >> 1; } } #endif // #if (L1_FF_MULTIBAND == 1) else /*********************************/ /* frequency offset compensation */ /*********************************/ /* Initialization */ #if (VCXO_ALGO == 1) switch (l1_config.params.afc_algo) { /* algo1 only: */ case ALGO_AFC_KALMAN: { #endif #if (VCXO_ALGO == 0) if (phase==AFC_INIT) { // WARNING // In this case, "angle" variable contains EEPROM_AFC initialization value // directly loaded from EEPROM, and "snr" variable is not meaningful. /* Static variables initialisation */ P=C_cov_start; Psi=0; if (angle>C_max_step) Psi_quant[C_N_del]=C_max_step; else if(angle<C_min_step) Psi_quant[C_N_del]=C_min_step; else Psi_quant[C_N_del]=angle; Psi=l1_config.params.psi_st*Psi_quant[C_N_del]; /* F0.16 * F13.3 = F13.19 */ } /* end AFC_INIT*/ else { if (phase==AFC_OPEN_LOOP) { /* delay line for Psi_quant values */ for (i=1;i<=C_N_del;i++) Psi_quant[i-1]=Psi_quant[i]; var_32=(WORD32)((WORD32)angle*l1_config.params.psi_sta_inv)<<4; /*(F16.0 * F1.15 = F17.15) << 4 = F13.19 */ #if(RF_FAM == 61) /* In order to implement the NINT function for a F16.0, we check */ /* if var_32 + 0.5*2**18 is a multiple of 2**18 */ quotient=(WORD16)((WORD32)(((WORD32)(var_32+(1<<17)))/(1<<18))); var_16=quotient*4; #else /* In order to implement the NINT function for a F16.0, we check */ /* if var_32 + 0.5*2**19 is a multiple of 2**19 */ quotient=(WORD16)((WORD32)(((WORD32)(var_32+(1<<18)))/(1<<19))); var_16=quotient*8; #endif if (var_16>C_max_step) Psi_quant[C_N_del]=Add_Sat_sign_16b(Psi_quant[C_N_del],C_max_step); else if(var_16<C_min_step) Psi_quant[C_N_del]=Add_Sat_sign_16b(Psi_quant[C_N_del],C_min_step); else Psi_quant[C_N_del]=Add_Sat_sign_16b(Psi_quant[C_N_del],var_16); /* F13.3 */ Psi=l1_config.params.psi_st*Psi_quant[C_N_del]; /* F0.16 * F13.3 = F13.19 */ }/*end if AFC_OPEN_LOOP*/ else { /* delay line for Psi_quant values */ for (i=1;i<=C_N_del;i++) Psi_quant[i-1]=Psi_quant[i]; /********************/ /* Filter algorithm */ /********************/ /* Covariance error is increased of C_Q */ P=P+(*frame_count)*C_Q; /* Clipping of P */ if (P>C_thr_P) P=C_thr_P; if (snr>=C_thr_snr) { /* Clipping of error angle */ if (angle>C_thr_phi) angle=C_thr_phi; if (angle<-C_thr_phi) angle=-C_thr_phi; /* Kalman gain */ /*K=P*(1/(P+C_a0_kalman+(C_g_kalman*RNS))) */ /*C_a0_kalman=0.01 */ /*C_g_kalman =0.05 */ num=(C_g_kalman/snr)+P+C_a0_kalman; /* (F2.30 / F6.10) = F 12.20 */ /* denom = P << 19 = F 1.39 */ /* extension of denom=P to a 40 bits variable */ /* denom (F12.20) << 16 = F 4.36 */ guard1=(WORD16)((WORD32)P>>16); /* denom = P<<16 = (F4.36) << 3 = F 1.39 */ denomH=(UWORD16)P; /* Low part of denom is equal to 0, because P has been 16 */ /* bits left shifted previously. */ denomH_3msb=(denomH>>13)&0x0007; guard1=(guard1<<3)|denomH_3msb; denomH<<=3; denom=(UWORD32)denomH<<16; /* num + guard1 are a 40 bits representation of P */ /* In order to compute P(F1.39)/num, we sample P in guard1 */ /* (scaled to a 32 bits number) and num (32 bits number) */ /* K = ((guard1<<24)/num)<<8 + (denom/num) */ var1=(WORD32)guard1<<24; var1=var1/num; var1=(WORD32)var1<<8; /* var2 is an unsigned variable, var1 contains signed guard*/ /* bits. */ var2=denom/num; K = (var1+var2)<<1; /* F1.39 / F12.20 = F13.19 */ /* F13.19 << 1 = F12.20 */ /* Clipping of the Kalman gain */ if (K>=C_thr_K) K=C_thr_K; /*******************************************************/ /* P=(1-K)*P = 0.8 * 0.5 at maximum */ /*******************************************************/ /* Perform a positive variable F12.20 multiplication by*/ /* positive variable F12.20 */ var_16=(WORD16)(1048576L-K); /* acclow(1-K) = F12.20 */ guard1=0; /* positive variable */ var1=UMult_40b(P,var_16,&guard1); var_16=(WORD16)((1048576L-K)>>16); /* acchigh(1-K) = F12.20 */ var2=P*var_16; /* var2 = 0x80000 * 0xc */ /* at maximum, so result */ /* is 32 bits WORD32 and */ /* equal 0x600000 */ /* extension of var2 to a 40 bits variable : var2<<16 */ guard2=(WORD16)((WORD32)var2>>16); guard1guard2=((WORD32)guard1<<16) |((WORD32) guard2&0x0000FFFFL); var2=var2<<16; var_32=Add_40b(guard1guard2,var1,var2,&guardout); /* var_32 (F8.40) >> 16 = F8.24 */ LGuard=(WORD32)guardout<<16; var1=(UWORD32)var_32>>16; /* var_32 >> 4 = F12.20 */ P=(var1+LGuard)>>4; Phi_32=Mult_40b(l1_config.params.psi_st_32,Psi_quant[0],&guardout); /* F0.32 * F13.3 = F5.35 */ LGuard=(WORD32)guardout<<16; /* var_32 (F5.35) >> 16 */ /* F13.19 */ var1=(UWORD32)Phi_32>>16; Phi_32=Psi-(LGuard+var1); /* F13.19 */ /*Phi=angle-Phi_32*/ Phi_32=((WORD32)angle<<4)-Phi_32; /* F1.15 * 4 = F13.19 */ Phi=(WORD16)(Phi_32>>4); /* F17.15 */ /*var1=K*Phi F12.20 * F1.15 = 13.35 */ guard1=0; var1=Mult_40b(K,Phi,&guard1); /* var1 (F13.35) >> 16 */ /* F13.19 */ LGuard=(WORD32)guard1<<16; var1=(UWORD32)var1>>16; Psi+=var1+LGuard; }/*if snr */ var_32=Mult_40b(Psi,l1_config.params.psi_st_inv,&guardout); /* F13.19 * C = F13.19 */ #if(RF_FAM == 61) /* In order to implement the NINT function for a F13.3, we check */ /* if var_32 + 0.5*2**18 is a multiple of 2**18 */ quotient=(WORD16)((WORD32)(((WORD32)(var_32+(1<<17)))/(1<<18))); var_16=quotient*4; #else /* In order to implement the NINT function for a F13.3, we check */ /* if var_32 + 0.5*2**19 is a multiple of 2**19 */ quotient=(WORD16)((WORD32)(((WORD32)(var_32+(1<<18)))/(1<<19))); var_16=quotient*8; #endif if (var_16>C_max_step) Psi_quant[C_N_del]=C_max_step; else if(var_16<C_min_step) Psi_quant[C_N_del]=C_min_step; else Psi_quant[C_N_del]=var_16; /* F13.3 */ }/*end AFC_CLOSE_LOOP*/ } /* end else AFC_INIT*/ *frame_count=0; return(Psi_quant[C_N_del]>>3); /* F16.0 */ #else } /* end case algo 1 */ /* algo2 + init + estimator/predictor */ case ALGO_AFC_LQG_PREDICTOR: { /******************************************************************/ /* (New) VCXO Algorithm */ /******************************************************************/ switch (phase) { case AFC_INIT_CENTER : case AFC_INIT_MAX : case AFC_INIT_MIN : quant_avg = 0; M_Count = 0; #if 0 /* present in LoCosto but not in TCS211 */ for (i = 0; i <= C_PSI_AVG_SIZE_D ; i++) //omaps00090550 psi_avg[i] = 0; #endif first_avg = 1; good_snr = 0; // DAC search algorithm is as follows - up to 12 attempts are made // DAC search algorithm uses three values : DAC_center -> DAC_max -> DAC_min -> // The first four attempts are made on DAC_center // The next four attempts are made on DAC_max // The last four attempts are made on DAC_min // There are statistical reasons for trying four times switch (phase) { case AFC_INIT_CENTER: psi_quant = l1_config.params.afc_dac_center; break; case AFC_INIT_MAX: psi_quant = l1_config.params.afc_dac_max; break; case AFC_INIT_MIN: psi_quant = l1_config.params.afc_dac_min; break; default : break; } /* F0.32 * F13.3 = F5.35 */ psi_past[C_N_del]=Mult_40b(l1_config.params.psi_st_32,psi_quant, &guardout); /* (F13.3<<16 )+(F5.35>>16) = F13.19 */ psi_past[C_N_del]=((WORD32)guardout<<16)+((UWORD32)psi_past[C_N_del]>>16); break; case AFC_OPEN_LOOP : { /* VCXO changes for spurious FB detection */ if (l1s.spurious_fb_detected == TRUE) { psi_quant = old_psi_quant; for(i=0;i<C_N_del+1;i++) psi_past[i] = old_psi_past[i]; /* reset the spurious_fb_detected_flag */ l1s.spurious_fb_detected = FALSE; } /* end of spuriousFB detected */ /* save in memory the old AFC related values */ old_psi_quant = psi_quant; for(i=0;i<C_N_del+1;i++) old_psi_past[i] = psi_past[i]; /* delay line for psi_quant values */ for (i = 1; i <= C_N_del; i++) psi_past[i-1] = psi_past[i]; /* (F16.0 * F1.15 = F17.15) << 4 = F13.19 */ var_32 = (WORD32) ((WORD32)angle * l1_config.params.psi_sta_inv) << 4; #if(RF_FAM == 61) /* In order to implement the NINT function for a F16.0,*/ /*we check if var_32 + 0.5*2**18 is a multiple of 2**18 */ var_16 = (WORD16) ((WORD32) (((WORD32)(var_32 + (1<<17))) / (1<<18))); var_16 = var_16 * 4; #else /* In order to implement the NINT function for a F16.0,*/ /*we check if var_32 + 0.5*2**19 is a multiple of 2**19 */ var_16 = (WORD16) ((WORD32) (((WORD32)(var_32 + (1<<18))) / (1<<19))); var_16 = var_16 * 8; #endif #if 0 /* LoCosto code with saturation */ if (var_16 > C_max_step) psi_quant = Add_Sat_sign_16b(psi_quant,C_max_step); else if (var_16 < C_min_step) psi_quant = Add_Sat_sign_16b(psi_quant,C_min_step); else psi_quant = Add_Sat_sign_16b(psi_quant,var_16); /* F13.3 */ #else /* matching TCS211 */ if (var_16 > C_max_step) psi_quant += C_max_step; else if (var_16 < C_min_step) psi_quant += C_min_step; else psi_quant += var_16; /* F13.3 */ #endif /* F0.32 * F13.3 = F5.35 */ psi_past[C_N_del]=Mult_40b(l1_config.params.psi_st_32,psi_quant, &guardout); /* (F13.3<<16 )+(F5.35>>16) = F13.19 */ psi_past[C_N_del]=((WORD32)guardout<<16)+((UWORD32)psi_past[C_N_del]>>16); } break; case AFC_CLOSED_LOOP : /* delay line for psi_quant values */ for (i = 1; i <= C_N_del; i++) psi_past[i-1] = psi_past[i]; /************************************/ /* Estimation */ /************************************/ if ( (l1_config.params.rgap_algo != 0) && ((l1_mode==CON_EST_MODE2)||(l1_mode==DEDIC_MODE) #if L1_GPRS || l1_mode==PACKET_TRANSFER_MODE #endif )) { M_Count += *frame_count; if (snr >= l1_config.params.afc_snr_thr) { // Accumulate average over N TDMA frames psi_avg[0] += psi_past[C_N_del]; // Count number of good snr's within window_avg_size chunks good_snr++; } // M_Count >= M ? if (M_Count >= l1_config.params.afc_win_avg_size_M) { // M_Count counts how far we have reached in the window_avg_size blocks // Scale estimate relative to good snr - Don't divide by zero in case of bad measurements if (good_snr > 0) psi_avg[0] /= good_snr; // We now have an estimation over window_avg_size TDMA frames in psi_avg[0] if (first_avg == 1) { first_avg = 0; // Use first estimation as best guess for the other avg values // This is used both at initialisation and when returning from reception gap for (i = 1; i <= C_PSI_AVG_SIZE_D ; i++) psi_avg[i] = psi_avg[0]; } // Estimation 1st order // Use biggest window to reduce noise effects signal in psi values // NOTE: Due to performance issues division by MSIZE is in predictor if (l1_config.params.rgap_algo >= 1) { quant_avg = (WORD16) (psi_avg[0] - psi_avg[C_PSI_AVG_SIZE_D]); } for (i = C_PSI_AVG_SIZE_D - 1; i >= 0 ; i--) psi_avg[i+1] = psi_avg[i]; psi_avg[0] = 0; M_Count = 0; good_snr = 0; } } else { // No estmation when in Idle mode (DEEP or BIG SLEEP) => Reset! first_avg = 1; M_Count = 0; good_snr = 0; psi_avg[0] = 0; } if (snr >= l1_config.params.afc_snr_thr) { /********************/ /* Filter algorithm */ /********************/ /* No prediction during normal operation */ B_Count= 0; /* Clip error angle */ if (angle > C_thr_phi) angle = C_thr_phi; if (angle < -C_thr_phi) angle = -C_thr_phi; Phi_32 = psi_past[C_N_del] - psi_past[0]; /* F13.19 */ /* Phi = angle - Phi_32*/ Phi_32 = ((WORD32) angle << 4) - Phi_32; /* F1.15 * 4 = F13.19 */ #if 0 /* LoCosto code */ Phi = (WORD16)((WORD32)((WORD32)(Phi_32 + (1<<3)))/ (1<<4)); /* F17.15 */ #else /* TCS211 reconstruction */ Phi = Phi_32 >> 4; #endif /* (F0.20 * F1.15) >> 16 = F13.19 */ #if 0 /* LoCosto code with saturation and L */ var_32 = (L * Phi + (1<<15)) >> 16; psi_past[C_N_del] = Add_Sat_sign_32b(psi_past[C_N_del],var_32); #else /* matching TCS211 */ psi_past[C_N_del] += (10433 * Phi) >> 16; #endif } else { /************************************/ /* Prediction */ /************************************/ // Only predict in dedicated mode // NO prediction in idle mode // l1a_l1s_com.dedic_set.SignalCode = NULL if ( (l1_config.params.rgap_algo != 0) && ((l1_mode==CON_EST_MODE2)||(l1_mode==DEDIC_MODE) #if L1_GPRS || l1_mode==PACKET_TRANSFER_MODE #endif )) { /* Prediction of psi during reception gaps */ B_Count += *frame_count; /* Predict psi ONLY when we have sufficient measurements available */ /* If we don't have enough measurements we don't do anything (= 0th order estimation)*/ // Was the consecutive bad SNRs threshold value exceeded? if (B_Count>= l1_config.params.rgap_bad_snr_count_B) { // Predict with 0th order estimation is the default // Predict with 1st order estimation if (l1_config.params.rgap_algo >= 1) { #if 0 /* LoCosto code with saturation */ psi_past[C_N_del] = Add_Sat_sign_32b(psi_past[C_N_del], ((quant_avg * (l1_config.params.rgap_bad_snr_count_B))/(C_MSIZE)) ); #else /* matching TCS211 */ psi_past[C_N_del] += ((quant_avg * (l1_config.params.rgap_bad_snr_count_B))/(C_MSIZE)); #endif } B_Count= B_Count - l1_config.params.rgap_bad_snr_count_B; // Indicate by raising first_avg flag that a reception gap has occurred // I.e. the psi_avg table must be reinitialised after leaving reception gap first_avg = 1; // Counters in estimation part must also be reset M_Count = 0; good_snr = 0; psi_avg[0] = 0; } } } /* Quantize psi value */ /* F0.19 * 16.0 = F16.19 */ #if 0 /* LoCosto code */ var_32 = Sat_Mult_20sign_16unsign(psi_past[C_N_del],l1_config.params.psi_st_inv); #else /* TCS211 reconstruction */ var_32 = psi_past[C_N_del] * l1_config.params.psi_st_inv; #endif #if(RF_FAM == 61) /* In order to implement the NINT function for a F13.3,*/ /*we check if var_32 + 0.5*2**18 is a multiple of 2**18 */ var_16 = (WORD16) ((WORD32)((WORD32)(var_32 + (1<<17))) / (1<<18)); var_16 = var_16 * 4; #else /* In order to implement the NINT function for a F13.3,*/ /*we check if var_32 + 0.5*2**19 is a multiple of 2**19 */ var_16 = (WORD16) ((WORD32)((WORD32)(var_32 + (1<<18))) / (1<<19)); var_16 = var_16 * 8; #endif if (var_16 > C_max_step) psi_quant = C_max_step; else if (var_16 < C_min_step) psi_quant = C_min_step; else psi_quant = var_16; /* F13.3 */ break; } // switch phase *frame_count = 0; return (psi_quant >> 3); /* F16.0 */ } /* end case algo 2 */ /* algo1 + init + estimator/predictor */ case ALGO_AFC_KALMAN_PREDICTOR: { if ((phase==AFC_INIT_CENTER) || (phase==AFC_INIT_MAX) || (phase==AFC_INIT_MIN)) { // WARNING // In this case, "angle" variable contains EEPROM_AFC initialization value // directly loaded from EEPROM, and "snr" variable is not meaningful. /* Static variables initialisation */ quant_avg = 0; M_Count = 0; #if 0 /* present in LoCosto but not in TCS211 */ for (i = 0; i <=C_PSI_AVG_SIZE_D ; i++) //omaps00090550 psi_avg[i] = 0; #endif first_avg = 1; good_snr = 0; // DAC search algorithm is as follows - up to 12 attempts are made // DAC search algorithm uses three values : DAC_center -> DAC_max -> DAC_min -> // The first four attempts are made on DAC_center // The next four attempts are made on DAC_max // The last four attempts are made on DAC_min // There are statistical reasons for trying four times switch (phase) { case AFC_INIT_CENTER: Psi_quant[C_N_del] = l1_config.params.afc_dac_center; break; case AFC_INIT_MAX: Psi_quant[C_N_del] = l1_config.params.afc_dac_max; break; case AFC_INIT_MIN: Psi_quant[C_N_del] = l1_config.params.afc_dac_min; break; default : break; } P=C_cov_start; Psi=0; if (angle>C_max_step) Psi_quant[C_N_del]=C_max_step; else if(angle<C_min_step) Psi_quant[C_N_del]=C_min_step; else Psi_quant[C_N_del]=angle; /* F0.32 * F13.3 = F5.35 */ Psi=Mult_40b(l1_config.params.psi_st_32,Psi_quant[C_N_del], &guardout); /* (F13.3<<16 )+(F5.35>>16) = F13.19 */ Psi=((WORD32)guardout<<16)+((UWORD32)Psi>>16); } /* end AFC_INIT*/ else { if (phase==AFC_OPEN_LOOP) { /* relaod last good values in the ALGO */ if (l1s.spurious_fb_detected == TRUE) { for(i=0;i<C_N_del+1;i++) Psi_quant[i] = old_Psi_quant[i]; Psi = old_Psi; l1s.spurious_fb_detected = FALSE; } /* Save the old values in memory */ for(i=0;i<C_N_del+1;i++) old_Psi_quant[i] = Psi_quant[i]; old_Psi = Psi; /* delay line for Psi_quant values */ for (i=1;i<=C_N_del;i++) Psi_quant[i-1]=Psi_quant[i]; var_32=(WORD32)((WORD32)angle*l1_config.params.psi_sta_inv)<<4; /*(F16.0 * F1.15 = F17.15) << 4 = F13.19 */ #if(RF_FAM == 61) /* In order to implement the NINT function for a F16.0, we check */ /* if var_32 + 0.5*2**18 is a multiple of 2**18 */ quotient=(WORD16)((WORD32)(((WORD32)(var_32+(1<<17)))/(1<<18))); var_16=quotient*4; #else /* In order to implement the NINT function for a F16.0, we check */ /* if var_32 + 0.5*2**19 is a multiple of 2**19 */ quotient=(WORD16)((WORD32)(((WORD32)(var_32+(1<<18)))/(1<<19))); var_16=quotient*8; #endif #if 0 /* LoCosto code with saturation */ if (var_16>C_max_step) Psi_quant[C_N_del]=Add_Sat_sign_16b(Psi_quant[C_N_del],C_max_step); else if (var_16<C_min_step) Psi_quant[C_N_del]=Add_Sat_sign_16b(Psi_quant[C_N_del],C_min_step); else Psi_quant[C_N_del]=Add_Sat_sign_16b(Psi_quant[C_N_del],var_16); /* F13.3 */ #else /* matching TCS211 */ if (var_16>C_max_step) Psi_quant[C_N_del] += C_max_step; else if (var_16<C_min_step) Psi_quant[C_N_del] += C_min_step; else Psi_quant[C_N_del] += var_16; /* F13.3 */ #endif /* F0.32 * F13.3 = F5.35 */ Psi=Mult_40b(l1_config.params.psi_st_32,Psi_quant[C_N_del], &guardout); /* (F13.3<<16 )+(F5.35>>16) = F13.19 */ Psi=((WORD32)guardout<<16)+((UWORD32)Psi>>16); }/*end if AFC_OPEN_LOOP*/ else { /* delay line for Psi_quant values */ for (i=1;i<=C_N_del;i++) Psi_quant[i-1]=Psi_quant[i]; /************************************/ /* Estimation */ /************************************/ if ( (l1_config.params.rgap_algo != 0) && ((l1_mode==CON_EST_MODE2)||(l1_mode==DEDIC_MODE) #if L1_GPRS || l1_mode==PACKET_TRANSFER_MODE #endif )) { M_Count += *frame_count; if (snr >= l1_config.params.afc_snr_thr) { // Accumulate average over N TDMA frames psi_avg[0] += psi_past[C_N_del]; // Count number of good snr's within window_avg_size chunks good_snr++; } // M_Count >= M ? if (M_Count >= l1_config.params.afc_win_avg_size_M) { // M_Count counts how far we have reached in the window_avg_size blocks // Scale estimate relative to good snr - Don't divide by zero in case of bad measurements if (good_snr > 0) psi_avg[0] /= good_snr; // We now have an estimation over window_avg_size TDMA frames in psi_avg[0] if (first_avg == 1) { first_avg = 0; // Use first estimation as best guess for the other avg values // This is used both at initialisation and when returning from reception gap for (i = 1; i <= C_PSI_AVG_SIZE_D ; i++) psi_avg[i] = psi_avg[0]; } // Estimation 1st order // Use biggest window to reduce noise effects signal in psi values // NOTE: Due to performance issues division by MSIZE is in predictor if (l1_config.params.rgap_algo >= 1) { quant_avg = (WORD16) (psi_avg[0] - psi_avg[C_PSI_AVG_SIZE_D]); } for (i = C_PSI_AVG_SIZE_D - 1; i >= 0 ; i--) psi_avg[i+1] = psi_avg[i]; psi_avg[0] = 0; M_Count = 0; good_snr = 0; } } else { // No estmation when in Idle mode (DEEP or BIG SLEEP) => Reset! first_avg = 1; M_Count = 0; good_snr = 0; psi_avg[0] = 0; } /********************/ /* Filter algorithm */ /********************/ /* Covariance error is increased of C_Q */ P=P+(*frame_count)*C_Q; /* Clipping of P */ if (P>C_thr_P) P=C_thr_P; if (snr>=C_thr_snr) { /* Clipping of error angle */ if (angle>C_thr_phi) angle=C_thr_phi; if (angle<-C_thr_phi) angle=-C_thr_phi; /* Kalman gain */ /*K=P*(1/(P+C_a0_kalman+(C_g_kalman*RNS))) */ /*C_a0_kalman=0.01 */ /*C_g_kalman =0.05 */ num=(C_g_kalman/snr)+P+C_a0_kalman; /* (F2.30 / F6.10) = F 12.20 */ /* denom = P << 19 = F 1.39 */ /* extension of denom=P to a 40 bits variable */ /* denom (F12.20) << 16 = F 4.36 */ guard1=(WORD16)((WORD32)P>>16); /* denom = P<<16 = (F4.36) << 3 = F 1.39 */ denomH=(UWORD16)P; /* Low part of denom is equal to 0, because P has been 16 */ /* bits left shifted previously. */ denomH_3msb=(denomH>>13)&0x0007; guard1=(guard1<<3)|denomH_3msb; denomH<<=3; denom=denomH<<16; //(UWORD32) removed typecast omaps00090550 /* num + guard1 are a 40 bits representation of P */ /* In order to compute P(F1.39)/num, we sample P in guard1 */ /* (scaled to a 32 bits number) and num (32 bits number) */ /* K = ((guard1<<24)/num)<<8 + (denom/num) */ var1=(WORD32)guard1<<24; var1=var1/num; var1=(WORD32)var1<<8; /* var2 is an unsigned variable, var1 contains signed guard*/ /* bits. */ #if 0 /* fixed LoCosto code */ var2= ((WORD32)(denom)/(num)); //omaps00090550 #else /* matching TCS211 */ var2= denom / num; #endif K = (var1+var2)<<1; /* F1.39 / F12.20 = F13.19 */ /* F13.19 << 1 = F12.20 */ /* Clipping of the Kalman gain */ if (K>=C_thr_K) K=C_thr_K; /*******************************************************/ /* P=(1-K)*P = 0.8 * 0.5 at maximum */ /*******************************************************/ /* Perform a positive variable F12.20 multiplication by*/ /* positive variable F12.20 */ var_16=(WORD16)(1048576L-K); /* acclow(1-K) = F12.20 */ guard1=0; /* positive variable */ var1=UMult_40b(P,var_16,&guard1); var_16=(WORD16)((1048576L-K)>>16); /* acchigh(1-K) = F12.20 */ var2=P*var_16; /* var2 = 0x80000 * 0xc */ /* at maximum, so result */ /* is 32 bits WORD32 and */ /* equal 0x600000 */ /* extension of var2 to a 40 bits variable : var2<<16 */ guard2=(WORD16)((WORD32)var2>>16); guard1guard2=((WORD32)guard1<<16) |((WORD32) guard2&0x0000FFFFL); var2=var2<<16; var_32=Add_40b(guard1guard2,var1,var2,&guardout); /* var_32 (F8.40) >> 16 = F8.24 */ LGuard=(WORD32)guardout<<16; var1=(UWORD32)var_32>>16; /* var_32 >> 4 = F12.20 */ P=(var1+LGuard)>>4; Phi_32=Mult_40b(l1_config.params.psi_st_32,Psi_quant[0],&guardout); /* F0.32 * F13.3 = F5.35 */ LGuard=(WORD32)guardout<<16; /* var_32 (F5.35) >> 16 */ /* F13.19 */ var1=(UWORD32)Phi_32>>16; Phi_32=Psi-(LGuard+var1); /* F13.19 */ /*Phi=angle-Phi_32*/ Phi_32=((WORD32)angle<<4)-Phi_32; /* F1.15 * 4 = F13.19 */ Phi=(WORD16)(Phi_32>>4); /* F17.15 */ /*var1=K*Phi F12.20 * F1.15 = 13.35 */ guard1=0; var1=Mult_40b(K,Phi,&guard1); /* var1 (F13.35) >> 16 */ /* F13.19 */ LGuard=(WORD32)guard1<<16; var1=(UWORD32)var1>>16; Psi+=var1+LGuard; } else { /************************************/ /* Prediction */ /************************************/ // Only predict in dedicated mode // NO prediction in idle mode // l1a_l1s_com.dedic_set.SignalCode = NULL if ( (l1_config.params.rgap_algo != 0) && ((l1_mode==CON_EST_MODE2)||(l1_mode==DEDIC_MODE) #if L1_GPRS || l1_mode==PACKET_TRANSFER_MODE #endif )) { /* Prediction of psi during reception gaps */ B_Count+= *frame_count; /* Predict psi ONLY when we have sufficient measurements available */ /* If we don't have enough measurements we don't do anything (= 0th order estimation)*/ // Was the consecutive bad SNRs threshold value exceeded? if (B_Count>= l1_config.params.rgap_bad_snr_count_B) { // Predict with 0th order estimation is the default // Predict with 1st order estimation if (l1_config.params.rgap_algo >= 1) Psi += ((quant_avg * (l1_config.params.rgap_bad_snr_count_B))/(C_MSIZE)); B_Count= B_Count - l1_config.params.rgap_bad_snr_count_B; // Indicate by raising first_avg flag that a reception gap has occurred // I.e. the psi_avg table must be reinitialised after leaving reception gap first_avg = 1; // Counters in estimation part must also be reset M_Count = 0; good_snr = 0; psi_avg[0] = 0; } } } /* Quantize psi value */ var_32=Mult_40b(Psi,l1_config.params.psi_st_inv,&guardout); /* F13.19 * C = F13.19 */ #if(RF_FAM == 61) /* In order to implement the NINT function for a F13.3, we check */ /* if var_32 + 0.5*2**18 is a multiple of 2**18 */ quotient=(WORD16)((WORD32)(((WORD32)(var_32+(1<<17)))/(1<<18))); var_16=quotient*4; #else /* In order to implement the NINT function for a F13.3, we check */ /* if var_32 + 0.5*2**19 is a multiple of 2**19 */ quotient=(WORD16)((WORD32)(((WORD32)(var_32+(1<<18)))/(1<<19))); var_16=quotient*8; #endif if (var_16>C_max_step) Psi_quant[C_N_del]=C_max_step; else if(var_16<C_min_step) Psi_quant[C_N_del]=C_min_step; else Psi_quant[C_N_del]=var_16; /* F13.3 */ }/*end AFC_CLOSE_LOOP*/ } /* end else AFC_INIT*/ *frame_count = 0; return(Psi_quant[C_N_del]>>3); /* F16.0 */ } /* end case algo 3 */ #endif #if (VCXO_ALGO == 1) default: return 0; //omaps00090550 break; } // end of Switch #endif } /* end l1ctl_afc */ /************************************/ /* Automatic timing control (TOA) */ /************************************/ #if (TOA_ALGO == 2) #define TOA_DEBUG_ENABLE 0 #if (TOA_DEBUG_ENABLE == 1) #define TOA_MAKE_ZERO 0 #define TOA_LOG_BUFFER_LENGTH 4096 typedef struct { UWORD16 SNR_val; UWORD16 TOA_val; UWORD16 l1_mode; UWORD16 toa_frames_counter; UWORD16 fn_mod42432; }T_TOA_log_debug; T_TOA_log_debug toa_log_debug[TOA_LOG_BUFFER_LENGTH]; UWORD32 toa_log_index; UWORD32 toa_make_zero_f; #endif /*-------------------------------------------------------*/ /* l1ctl_toa() */ /*-------------------------------------------------------*/ /* Parameters : */ /* Return : */ /* Functionality : */ /*-------------------------------------------------------*/ WORD16 l1ctl_toa (UWORD8 phase, UWORD32 l1_mode, UWORD16 SNR_val, UWORD16 TOA_val) { WORD16 TOA_period_len = TOA_PERIOD_LEN [l1_mode]; WORD16 TOA_SHIFT=ISH_INVALID; UWORD16 cumul_abs; WORD16 cumul_sign; WORD32 prod_tmp, div_tmp,prod_sign; WORD32 toa_update_flag=0; WORD16 cumul; UWORD16 cumul_counter; #if (NEW_TOA_ALGO == 1) UWORD16 Trans_active; static WORD16 cumul_noTrans =0; static UWORD16 period_counter_noTrans =0; if ((l1_mode==CON_EST_MODE2)||(l1_mode==DEDIC_MODE) #if L1_GPRS || l1_mode==PACKET_TRANSFER_MODE #endif ) Trans_active=TRUE; else Trans_active=FALSE; #endif if (phase==TOA_INIT) { #if (NEW_TOA_ALGO == 1) cumul_noTrans =0; period_counter_noTrans =0; #endif l1s.toa_var.toa_frames_counter=0; l1s.toa_var.toa_accumul_counter=0; l1s.toa_var.toa_accumul_value=0; #if (TOA_DEBUG_ENABLE == 1) toa_log_index = 0; #if (TOA_MAKE_ZERO == 1) toa_make_zero_f = 1; #else toa_make_zero_f = 0; #endif #endif return (TOA_SHIFT); } cumul = l1s.toa_var.toa_accumul_value; cumul_counter = l1s.toa_var.toa_accumul_counter; #if (TOA_DEBUG_ENABLE == 1) toa_log_debug[toa_log_index].SNR_val = SNR_val; toa_log_debug[toa_log_index].TOA_val = TOA_val; toa_log_debug[toa_log_index].l1_mode = l1_mode; toa_log_debug[toa_log_index].toa_frames_counter = l1s.toa_var.toa_frames_counter; toa_log_debug[toa_log_index].fn_mod42432 = l1s.actual_time.fn_mod42432; toa_log_index++; if(toa_log_index == TOA_LOG_BUFFER_LENGTH) { toa_log_index = 0; } #endif /* #if (TOA_DEBUG_ENABLE == 1) */ #if (TRACE_TYPE == 5) trace_toa_sim_ctrl(SNR_val, TOA_val, l1_mode, l1s.toa_var.toa_frames_counter, l1s.toa_var.toa_accumul_counter, l1s.toa_var.toa_accumul_value); #endif l1s.toa_var.toa_frames_counter++; { /* Fix for TOA */ #define DSP_CALC_NO_TABS_HO 0x3CA4 UWORD16 *toa_ho_fix; toa_ho_fix=(UWORD16 *)API_address_dsp2mcu(DSP_CALC_NO_TABS_HO); if ((TOA_val >= 22) || (TOA_val <= 6)) { *toa_ho_fix = 1; } if (*toa_ho_fix == 1) { if((TOA_val <= 18) && (TOA_val >= 10)) { *toa_ho_fix = 0; } } else { *toa_ho_fix = 0; } } #if (NEW_TOA_ALGO == 1) if (Trans_active) { #endif if (SNR_val>= L1_TOA_SNR_THRESHOLD) { cumul_counter++; prod_tmp = L1_TOA_LAMBDA * cumul; prod_tmp = prod_tmp + ((0x00004000)); // basically for rounding div_tmp = ((prod_tmp >> 15) & (0x0000FFFF)); cumul = div_tmp; // implemented below is // cumul = cumul + (L1_TOA_ONE_MINUS_LAMBDA * signum(TOA_Val - L1_TOA_EXPECTED_TOA)) if(TOA_val > L1_TOA_EXPECTED_TOA) { cumul = cumul + L1_TOA_ONE_MINUS_LAMBDA; } else if (TOA_val < L1_TOA_EXPECTED_TOA) { cumul = cumul - L1_TOA_ONE_MINUS_LAMBDA; } } // End if SNR_val if(l1s.toa_var.toa_update_flag == TRUE) { toa_update_flag = 1; } if (toa_update_flag) { cumul_sign = (cumul>0)? 1: -1; cumul_abs = cumul_sign*cumul; if(cumul_counter <= 5) { TOA_SHIFT = (cumul_abs<=L1_TOA_THRESHOLD_15)? 0: cumul_sign; } else if(cumul_counter == 6) { TOA_SHIFT = (cumul_abs<=L1_TOA_THRESHOLD_20)? 0: cumul_sign; } else if(cumul_counter == 7) { TOA_SHIFT = (cumul_abs<=L1_TOA_THRESHOLD_25)? 0: cumul_sign; } else if(cumul_counter >= 8) { TOA_SHIFT = (cumul_abs<=L1_TOA_THRESHOLD_30)? 0: cumul_sign; } #if (TRACE_TYPE==1) || (TRACE_TYPE==4) trace_info.toa_trace_var.toa_accumul_value = cumul; trace_info.toa_trace_var.toa_accumul_counter = cumul_counter; trace_info.toa_trace_var.toa_frames_counter = l1s.toa_var.toa_frames_counter; #endif cumul = 0; cumul_counter = 0; l1s.toa_var.toa_frames_counter = 0; l1s.toa_var.toa_update_flag = FALSE; #if (TOA_DEBUG_ENABLE == 1) #if (TOA_MAKE_ZERO == 1) if (toa_make_zero_f == 1) { TOA_SHIFT=0; } #endif /*#if (TOA_DEBUG_ENABLE == 1)*/ #endif /*#if (TOA_MAKE_ZERO == 1)*/ } // end of if toa_update_flag #if (NEW_TOA_ALGO == 1) } else { period_counter_noTrans++; if (SNR_val>= L1_TOA_SNR_THRESHOLD) { cumul_noTrans = cumul_noTrans + TOA_val - L1_TOA_EXPECTED_TOA; } // End if SNR_val if (l1s.toa_var.toa_update_flag == TRUE) { switch (period_counter_noTrans) { case 2: if (cumul_noTrans>=0) TOA_SHIFT = (cumul_noTrans+1) >>1 ; else TOA_SHIFT = (cumul_noTrans) >>1 ; break; case 3: /* Not fully accurate rounding*/ if (cumul_noTrans>=0) TOA_SHIFT = (cumul_noTrans+2)/3 ; else TOA_SHIFT = (cumul_noTrans-2)/3 ; break; case 4: if (cumul_noTrans>=0) TOA_SHIFT = (cumul_noTrans+2) >>2 ; else TOA_SHIFT = (cumul_noTrans+1) >>2 ; break; default: TOA_SHIFT = cumul_noTrans; break; } /* end switch*/ if (TOA_SHIFT>8) TOA_SHIFT =8; if (TOA_SHIFT<-8) TOA_SHIFT =-8; #if (TRACE_TYPE==1) || (TRACE_TYPE==4) trace_info.toa_trace_var.toa_accumul_value = cumul_noTrans; trace_info.toa_trace_var.toa_accumul_counter = period_counter_noTrans; trace_info.toa_trace_var.toa_frames_counter = period_counter_noTrans; #endif cumul_noTrans = 0; period_counter_noTrans = 0; l1s.toa_var.toa_update_flag = FALSE; #if (TOA_DEBUG_ENABLE == 1) #if (TOA_MAKE_ZERO == 1) if (toa_make_zero_f == 1) { TOA_SHIFT=0; } #endif /*#if (TOA_DEBUG_ENABLE == 1)*/ #endif /*#if (TOA_MAKE_ZERO == 1)*/ } // end if update_flag } #endif // error a TOA is waiting to be updated in the TPU and will be erased #if (TRACE_TYPE==1) || (TRACE_TYPE==4) if (l1s.toa_var.toa_shift != ISH_INVALID) { l1_trace_toa_not_updated (); // should not occur!! } #endif if (TOA_SHIFT != ISH_INVALID) // new TOA => set the mask frames { // Set mask counter to 2 (2 frames masked). l1s.toa_var.toa_snr_mask = 2; } l1s.toa_var.toa_accumul_value = cumul; l1s.toa_var.toa_accumul_counter = cumul_counter; return(TOA_SHIFT); } // l1ctl_toa #else /*-------------------------------------------------------*/ /* l1ctl_toa_update() */ /*-------------------------------------------------------*/ /* Parameters : */ /* Return : */ /* Functionality : */ /*-------------------------------------------------------*/ WORD16 l1ctl_toa_update(UWORD32 *TOASP, UWORD32 l1_mode) { static UWORD16 Old_TOA_estimated=12; //unit is Qbit UWORD32 TOAMAX; WORD16 IZW,ISH,i; UWORD32 TOA_estimated=0; //unit is Qbit UWORD16 Trans_active; if ((l1_mode==CON_EST_MODE2)||(l1_mode==DEDIC_MODE) #if L1_GPRS || l1_mode==PACKET_TRANSFER_MODE #endif ) Trans_active=TRUE; else Trans_active=FALSE; /* TOA offset computation and clock adjustement */ TOAMAX=0; for (i=1;i<TOA_HISTO_LEN;i++) { if (TOASP[i]>TOAMAX) TOAMAX=TOASP[i]; } TOAMAX >>= C_RED; i=1;IZW=0; while (i<TOA_HISTO_LEN && IZW==0) { if (TOASP[i]>=TOAMAX) IZW=i; i++; } /* Estimated TOA calculation */ if (TOASP[IZW-1]<(2*TOAMAX/3)) { TOA_estimated=IZW; TOA_estimated *= 4; // unit in QBit } else { #if 0 /* fix added in LoCosto, not present in TCS211 */ UWORD32 TOA_divisor; #endif TOA_estimated=(TOASP[IZW]*IZW)+(TOASP[IZW-1]*(IZW-1)>>C_GEW); TOA_estimated *= 8; //F13.3 in order to have qBit precision #if 0 TOA_divisor = TOASP[IZW]+(TOASP[IZW-1] >> C_GEW); if (TOA_divisor!=0) #endif { TOA_estimated /= TOASP[IZW]+(TOASP[IZW-1] >> C_GEW); TOA_estimated /= 2; // unit in QBit ("/8" then "*4" = "/2") } #if 0 else { TOA_estimated = 0; } #endif } if (Trans_active) TOA_estimated=(TOA_estimated+(Old_TOA_estimated+4)) / 2; /* Offset calculation*/ if (TOA_estimated>=17 || TOA_estimated<=15) ISH=TOA_estimated - 16; else ISH=0; if (Trans_active) { if (ISH>1) ISH=1; if (ISH<-1) ISH=-1; } else { if (ISH>8) ISH=8; if (ISH<-8) ISH=-8; } Old_TOA_estimated = TOA_estimated - ISH - 4; return (ISH); } /*-------------------------------------------------------*/ /* l1ctl_toa() */ /*-------------------------------------------------------*/ /* Parameters : */ /* Return : */ /* Functionality : generate an histogram of TOA weighted */ /* with SNR */ /*-------------------------------------------------------*/ WORD16 l1ctl_toa(UWORD8 phase, UWORD32 l1_mode, UWORD16 SNR_val, UWORD16 TOA_val, BOOL *toa_update, UWORD16 *toa_period_count #if (FF_L1_FAST_DECODING == 1) , UWORD8 skipped_values #endif ) { // xSignalHeaderRec *msg; UWORD16 i; WORD16 TOA_period_len = TOA_PERIOD_LEN[l1_mode]; static UWORD32 histo[TOA_HISTO_LEN]; static WORD16 period_counter=0; UWORD32 SNR_ZW; WORD16 ISH=ISH_INVALID; UWORD8 histo_center; #if 0 if ((l1_mode==CON_EST_MODE2)||(l1_mode==DEDIC_MODE)) histo_center=4; else histo_center=5; #else histo_center=4; #endif if (phase==TOA_INIT) { period_counter=0; for (i=0;i<TOA_HISTO_LEN;i++) histo[i]=0; histo[histo_center]=128; //F6.10 return(ISH); } #if (FF_L1_FAST_DECODING == 1) /* Manage any missing bursts due to fast decoding */ period_counter += skipped_values; #endif period_counter++; /* Filter update */ if (SNR_val>=C_SNRGR) { if (SNR_val>C_SNR_THR) SNR_ZW=C_SNR_THR; else SNR_ZW=SNR_val; histo[TOA_val+1]+=SNR_ZW; /* if TOA=0 histo[1]++ */ /* if TOA=1 histo[2]++ */ /* ... */ /* if TOA=9 histo[10]++ */ /* histo[0] is reserved for computation */ } #if L1_GPRS if (l1_mode==PACKET_TRANSFER_MODE) { if (*toa_update) { // Get ISH. ISH = l1ctl_toa_update(histo, l1_mode); //reset TOA period length counter period_counter=0; //reset histogram for (i=0;i<TOA_HISTO_LEN;i++) histo[i]=0; histo[histo_center]=128; //F6.10 *toa_update = FALSE; // reset TOA update flag *toa_period_count = 0; // reset TOA period counter } } else #endif if (period_counter>=TOA_period_len) // It is time to compute a new ISH and to reset the histogram. // Rem: ">=" is very important since a "l1 mode" change can give // a "TOA_period_len" smaller than the previous one an // therefore a "period_counter" may be already higher than // the new "TOA_period_len". { // Get ISH. ISH = l1ctl_toa_update(histo, l1_mode); //reset TOA period length counter period_counter=0; //reset histogram for (i=0;i<TOA_HISTO_LEN;i++) histo[i]=0; histo[histo_center]=128; //F6.10 } // error a TOA is waiting to be updated in the TPU and will be erased #if (TRACE_TYPE==1) || (TRACE_TYPE==4) if (l1s.toa_shift != ISH_INVALID) { l1_trace_toa_not_updated(); // should not occur !! } #endif if (ISH != ISH_INVALID) // new TOA => set the mask frames { // Set mask counter to 2 (2 frames masked). l1s.toa_snr_mask = 2; } return(ISH); } #endif /*-------------------------------------------------------*/ /* l1ctl_txpwr() */ /*-------------------------------------------------------*/ /* Parameters : */ /* Return : */ /* Functionality : */ /*-------------------------------------------------------*/ UWORD8 l1ctl_txpwr(UWORD8 target_txpwr, UWORD8 current_txpwr) { if(target_txpwr > current_txpwr) { current_txpwr ++; // Increase TX power by 2 dB. } else if(target_txpwr < current_txpwr) { current_txpwr --; // Decrease TX power by 2 dB. } return(current_txpwr); } /************************************/ /* Automatic Gain Control */ /************************************/ /*-------------------------------------------------------*/ /* l1ctl_encode_delta1() */ /*-------------------------------------------------------*/ /* Parameters : */ /* Return : */ /* Functionality : */ /*-------------------------------------------------------*/ #if(L1_FF_MULTIBAND == 0) WORD8 l1ctl_encode_delta1(UWORD16 radio_freq) { WORD8 freq_band; switch(l1_config.std.id) { case GSM: case GSM_E: case DCS1800: case PCS1900: case GSM850: freq_band = l1_config.std.cal_freq1_band1; break; case DUAL: case DUALEXT: case DUAL_US: if(radio_freq >= l1_config.std.first_radio_freq_band2) freq_band = l1_config.std.cal_freq1_band2; else freq_band = l1_config.std.cal_freq1_band1; break; } return(freq_band); } #endif /*-------------------------------------------------------*/ /* l1ctl_encode_lna() */ /*-------------------------------------------------------*/ /* Parameters : */ /* Return : */ /* Functionality : */ /*-------------------------------------------------------*/ #if (L1_FF_MULTIBAND == 0) void l1ctl_encode_lna( UWORD8 input_level, UWORD8 *lna_state, UWORD16 radio_freq) { /*** LNA Hysteresis is implemented as following : | On|---<>----+-------+ | | | LNA | | | | ^ v | | | | | | Off| +-------+----<>----- +-------------------------------- 50 40 30 20 input_level /-dBm THR_HIGH THR_LOW ***/ if(((l1_config.std.id == DUAL) || (l1_config.std.id == DUALEXT) ||(l1_config.std.id == DUAL_US)) && (radio_freq >= l1_config.std.first_radio_freq_band2)) { if ( input_level > l1_config.std.lna_switch_thr_high_band2 ) // < -40dBm ? { *lna_state = LNA_ON; // lna_off = FALSE } else if ( input_level < l1_config.std.lna_switch_thr_low_band2 ) // > -30dBm ? { *lna_state = LNA_OFF; // lna off = TRUE } } else { if ( input_level > l1_config.std.lna_switch_thr_high_band1 ) // < -40dBm ? { *lna_state = LNA_ON; // lna_off = FALSE } else if ( input_level < l1_config.std.lna_switch_thr_low_band1 ) // > -30dBm ? { *lna_state = LNA_OFF; // lna off = TRUE } } } #endif /*-------------------------------------------------------*/ /* l1ctl_csgc() */ /*-------------------------------------------------------*/ /* Description: */ /* ============ */ /* If we are running the first pass of a measurement */ /* session, we use the HIGH_AGC default agc setting to */ /* compute the input level from the measured power from */ /* the DSP. If this input level is saturated we set a */ /* saturation flag, otherwise we validate the measure and*/ /* store, for the considered carrier, the input level. */ /* When all the carriers have been scanned and some have */ /* been flagged "saturated", we measure them with the */ /* LOW_AGC agc setting, then store, for the considered */ /* carrier, the input level. */ /*-------------------------------------------------------*/ UWORD8 l1ctl_csgc(UWORD8 pm, UWORD16 radio_freq) { WORD16 current_IL, current_calibrated_IL; WORD8 delta1_freq, delta2_freq; WORD16 delta_drp_gain=0; UWORD32 index; UWORD16 g_magic; #if (RF_FAM == 61) && (L1_FF_MULTIBAND == 0) UWORD16 arfcn; #endif UWORD16 dco_algo_ctl_pw_temp = 0; UWORD8 if_ctl = 0; #if (RF_FAM == 61) && (CODE_VERSION != SIMULATION) UWORD8 if_threshold = C_IF_ZERO_LOW_THRESHOLD_GSM; #endif #if (L1_FF_MULTIBAND == 0) // initialize index index = radio_freq - l1_config.std.radio_freq_index_offset; #else index = l1_multiband_radio_freq_convert_into_operative_radio_freq(radio_freq); #endif /*if(L1_FF_MULTIBAND == 0)*/ delta1_freq = l1ctl_encode_delta1(radio_freq); delta2_freq = l1ctl_encode_delta2(radio_freq); g_magic = l1ctl_get_g_magic(radio_freq); #if (RF_FAM == 61) && (L1_FF_MULTIBAND == 0) arfcn = Convert_l1_radio_freq(radio_freq); #endif if (l1a_l1s_com.full_list.meas_1st_pass_read) { // We validate or not power measure (pm) for the considered carrier // with measurement achieved with HIGH_AGC setting. We are working // with non calibrated IL to avoid saturation #if(RF_FAM == 61) #if (CODE_VERSION != SIMULATION) #if (PWMEAS_IF_MODE_FORCE == 0) cust_get_if_dco_ctl_algo(&dco_algo_ctl_pw_temp, &if_ctl, (UWORD8) L1_IL_INVALID , 0, radio_freq,if_threshold); #else if_ctl = IF_120KHZ_DSP; dco_algo_ctl_pw_temp = DCO_IF_0KHZ; #endif #if (L1_FF_MULTIBAND == 0) delta_drp_gain = drp_gain_correction(arfcn, LNA_ON, (l1_config.params.high_agc << 1)); // F7.1 format #else delta_drp_gain = drp_gain_correction(radio_freq, LNA_ON, (l1_config.params.high_agc << 1)); // F7.1 format #endif // MULTIBAND == 0 else if(if_ctl == IF_100KHZ_DSP){ delta_drp_gain += SCF_ATTENUATION_LIF_100KHZ; } else{ /* i.e. if_ctl = IF_120KHZ_DSP*/ delta_drp_gain += SCF_ATTENUATION_LIF_120KHZ; } #endif #endif if (0==pm) // Check and filter illegal pm value by using last valid IL current_IL = (WORD16)(l1a_l1s_com.last_input_level[index].input_level); else { #if TESTMODE if (!l1_config.agc_enable) current_IL = (WORD16)(-(pm - ( (l1_config.tmode.rx_params.agc << 1) - delta_drp_gain ) - g_magic)); else #endif current_IL = (WORD16)(-(pm - ( (l1_config.params.high_agc <<1) - delta_drp_gain) - g_magic)); // for array index purpose, we work with positive IL } // NOTE: lna_value do not appear in this formula because lna is ALWAYS ON for // ---- this algorithm, so lna_value=lna_off*l1_config.params.lna_att_gsm=0 if ((current_IL<l1_config.params.high_agc_sat_thr) // Warning : we are working with positive IL // for IL_2_AGC_xx index purpose. #if TESTMODE && (l1_config.agc_enable) #endif ) { // pm is saturated so measure is not valid l1a_l1s_com.full_list.nbr_sat_carrier_ctrl++; l1a_l1s_com.full_list.nbr_sat_carrier_read++; l1a_l1s_com.full_list.sat_flag[l1a_l1s_com.full_list.next_to_read] = 1; } else { current_calibrated_IL = current_IL - delta1_freq - delta2_freq; #if TESTMODE // When running with fixed AGC setting saturated carriers may occur: // protect against negative IL; if ((!l1_config.agc_enable) && (current_calibrated_IL < 0)) { current_calibrated_IL=0; current_IL=0; } #endif // Protect IL stores against overflow if (current_calibrated_IL>INDEX_MAX) current_calibrated_IL=INDEX_MAX; if (current_IL>INDEX_MAX) current_IL=INDEX_MAX; // we validate the measure and save input_level and lna_off fields. l1ctl_encode_lna((UWORD8)(current_calibrated_IL>>1), &(l1a_l1s_com.last_input_level[index].lna_off), radio_freq); l1a_l1s_com.last_input_level[index].input_level = (UWORD8)current_IL + l1ctl_get_lna_att(radio_freq) * l1a_l1s_com.last_input_level[index].lna_off; l1a_l1s_com.full_list.sat_flag[l1a_l1s_com.full_list.next_to_read] = 0; } } else // 2nd pass if any. { // we validate the measure and save input_level and lna_off(always 0) // fields. #if(RF_FAM == 61) #if (CODE_VERSION != SIMULATION) cust_get_if_dco_ctl_algo(&dco_algo_ctl_pw_temp, &if_ctl, (UWORD8) L1_IL_INVALID, 0,radio_freq,if_threshold); #if (L1_FF_MULTIBAND == 0) delta_drp_gain = drp_gain_correction(arfcn, LNA_ON, (l1_config.params.low_agc << 1)); // F7.1 format #else delta_drp_gain = drp_gain_correction(radio_freq, LNA_ON, (l1_config.params.low_agc << 1)); // F7.1 format #endif if(if_ctl == IF_100KHZ_DSP){ delta_drp_gain += SCF_ATTENUATION_LIF_100KHZ; } else{ /* i.e. if_ctl = IF_120KHZ_DSP*/ delta_drp_gain += SCF_ATTENUATION_LIF_120KHZ; } #endif #endif if (0==pm) // Check and filter illegal pm value by using last valid IL current_IL = (WORD16)(l1a_l1s_com.last_input_level[index].input_level); else current_IL = (WORD16)(-(pm - ( (l1_config.params.low_agc << 1) - delta_drp_gain ) - g_magic)); current_calibrated_IL = current_IL - delta1_freq - delta2_freq; // Protect IL stores against overflow if (current_calibrated_IL>INDEX_MAX) current_calibrated_IL=INDEX_MAX; if (current_IL>INDEX_MAX) current_IL=INDEX_MAX; l1ctl_encode_lna((UWORD8)(current_calibrated_IL>>1), &(l1a_l1s_com.last_input_level[index].lna_off), radio_freq); l1a_l1s_com.last_input_level[index].input_level = (UWORD8)current_IL + l1ctl_get_lna_att(radio_freq) * l1a_l1s_com.last_input_level[index].lna_off; l1a_l1s_com.full_list.sat_flag[l1a_l1s_com.full_list.next_to_read] = 0; } return((UWORD8)current_calibrated_IL); } /*-------------------------------------------------------*/ /* l1ctl_pgc() */ /*-------------------------------------------------------*/ /* Description : For a given radio_freq, last_known_agc is */ /* ============ based on a prior knowledge (the last */ /* stored input_level for the considered */ /* carrier). From the power measurement on */ /* this carrier (pm), we update the */ /* input_level for this carrier, for the */ /* next task to control. */ /*-------------------------------------------------------*/ UWORD8 l1ctl_pgc(UWORD8 pm, UWORD8 last_known_il, UWORD8 lna_off, UWORD16 radio_freq) { WORD32 last_known_agc; WORD32 current_IL, current_calibrated_IL; WORD8 delta1_freq, delta2_freq; WORD16 delta_drp_gain=0; WORD32 index, lna_value; #if (RF_FAM == 61) && (CODE_VERSION != SIMULATION) UWORD16 arfcn; #endif UWORD16 dco_algo_ctl_pw_temp = 0; UWORD8 if_ctl = 0; #if (RF_FAM == 61) && (CODE_VERSION != SIMULATION) UWORD8 if_threshold = C_IF_ZERO_LOW_THRESHOLD_GSM; #endif #if (L1_FF_MULTIBAND == 0) // initialize index index = radio_freq - l1_config.std.radio_freq_index_offset; #else index = l1_multiband_radio_freq_convert_into_operative_radio_freq(radio_freq); #endif // #if (L1_FF_MULTIBAND == 0) else delta1_freq = l1ctl_encode_delta1(radio_freq); delta2_freq = l1ctl_encode_delta2(radio_freq); lna_value = lna_off * l1ctl_get_lna_att(radio_freq); last_known_agc = (Cust_get_agc_from_IL(radio_freq, last_known_il >> 1, PWR_ID)) << 1; // F7.1 in order to be compatible with // pm and IL formats [-20,+140 in F7.1] // contain the input_level value we use // in the associated CTL task to build // the agc used in this CTL. #if (RF_FAM == 61) && (CODE_VERSION != SIMULATION) #if (L1_FF_MULTIBAND == 0) arfcn = Convert_l1_radio_freq(radio_freq); #else arfcn = radio_freq; #endif #endif #if(RF_FAM == 61) #if (CODE_VERSION != SIMULATION) #if (PWMEAS_IF_MODE_FORCE == 0) cust_get_if_dco_ctl_algo(&dco_algo_ctl_pw_temp, &if_ctl, (UWORD8) L1_IL_VALID , last_known_il, radio_freq,if_threshold); #else if_ctl = IF_120KHZ_DSP; dco_algo_ctl_pw_temp = DCO_IF_0KHZ; #endif delta_drp_gain = drp_gain_correction(arfcn, lna_off, last_known_agc); // F7.1 format if(if_ctl == IF_100KHZ_DSP){ delta_drp_gain += SCF_ATTENUATION_LIF_100KHZ; } else{ /* i.e. if_ctl = IF_120KHZ_DSP*/ delta_drp_gain += SCF_ATTENUATION_LIF_120KHZ; } #endif #endif if (0==pm) // Check and filter illegal pm value by using last valid IL current_IL = l1a_l1s_com.last_input_level[index].input_level - lna_value; else current_IL = -(pm - (last_known_agc - delta_drp_gain) + lna_value - l1ctl_get_g_magic(radio_freq)); current_calibrated_IL = current_IL - delta1_freq - delta2_freq; // Protect IL stores against overflow if (current_calibrated_IL>INDEX_MAX) current_calibrated_IL=INDEX_MAX; if (current_IL>INDEX_MAX) current_IL=INDEX_MAX; // we validate the measure and save input_level and lna_off fields l1ctl_encode_lna((UWORD8)(current_calibrated_IL>>1), &(l1a_l1s_com.last_input_level[index].lna_off), radio_freq); l1a_l1s_com.last_input_level[index].input_level = (UWORD8)current_IL + l1ctl_get_lna_att(radio_freq) * l1a_l1s_com.last_input_level[index].lna_off; return((UWORD8)current_calibrated_IL); } /*-------------------------------------------------------*/ /* l1ctl_pgc2() */ /*-------------------------------------------------------*/ /* Description : */ /* ============= */ /* from power measurement pm_high_agc, */ /* achieve with an HIGH_AGC setting, and pm_low_agc */ /* achieve with a LOW_AGC seeting, we deduce the new */ /* AGC to apply in the next CTL task. */ /*-------------------------------------------------------*/ void l1ctl_pgc2(UWORD8 pm_high_agc, UWORD8 pm_low_agc, UWORD16 radio_freq) { UWORD8 pm; WORD32 IL_high_agc, IL_low_agc, new_IL, current_calibrated_IL; WORD8 delta1_freq, delta2_freq; WORD16 delta_high_drp_gain=0; WORD16 delta_low_drp_gain=0; WORD32 index; UWORD16 g_magic; #if (RF_FAM == 61) && (CODE_VERSION != SIMULATION) UWORD16 arfcn; #endif UWORD16 dco_algo_ctl_pw_temp = 0; UWORD8 if_ctl = 0; #if (RF_FAM == 61) && (CODE_VERSION != SIMULATION) UWORD8 if_threshold = C_IF_ZERO_LOW_THRESHOLD_GSM; #endif #if (L1_FF_MULTIBAND == 0) // initialize index index = radio_freq - l1_config.std.radio_freq_index_offset; #else index = l1_multiband_radio_freq_convert_into_operative_radio_freq(radio_freq); #endif // #if (L1_FF_MULTIBAND == 0) else delta1_freq = l1ctl_encode_delta1(radio_freq); delta2_freq = l1ctl_encode_delta2(radio_freq); g_magic = l1ctl_get_g_magic(radio_freq); // lna_off was set to 0 during CTRL, so lna_value = 0 do not appear in the following // formula. #if (RF_FAM == 61) && (CODE_VERSION != SIMULATION) #if (L1_FF_MULTIBAND == 0) arfcn = Convert_l1_radio_freq(radio_freq); #else arfcn = radio_freq; #endif #endif if ((0==pm_high_agc) || (0==pm_low_agc)) // Check and filter illegal pm value(s) by using last valid IL new_IL = l1a_l1s_com.last_input_level[index].input_level; else { #if(RF_FAM == 61) #if (CODE_VERSION != SIMULATION) #if (PWMEAS_IF_MODE_FORCE == 0) cust_get_if_dco_ctl_algo(&dco_algo_ctl_pw_temp, &if_ctl, (UWORD8) L1_IL_INVALID , 0, radio_freq,if_threshold); #else if_ctl = IF_120KHZ_DSP; dco_algo_ctl_pw_temp = DCO_IF_0KHZ; #endif delta_high_drp_gain = drp_gain_correction(arfcn, LNA_ON, (l1_config.params.high_agc << 1)); // F7.1 format delta_low_drp_gain = drp_gain_correction(arfcn, LNA_ON, (l1_config.params.low_agc << 1)); // F7.1 format if(if_ctl == IF_100KHZ_DSP){ delta_high_drp_gain += SCF_ATTENUATION_LIF_100KHZ; delta_low_drp_gain += SCF_ATTENUATION_LIF_100KHZ; } else{ /* i.e. if_ctl = IF_120KHZ_DSP*/ delta_high_drp_gain += SCF_ATTENUATION_LIF_120KHZ; delta_low_drp_gain += SCF_ATTENUATION_LIF_120KHZ; } #endif #endif IL_high_agc = -(pm_high_agc - ((l1_config.params.high_agc << 1) - delta_high_drp_gain) - g_magic); IL_low_agc = -(pm_low_agc - ((l1_config.params.low_agc << 1) - delta_low_drp_gain) - g_magic); // HIGH_AGC and LOW_AGC are formatted to F7.1 in order to be compatible with // pm and IL formats if (IL_low_agc>=l1_config.params.low_agc_noise_thr) // pm_low_agc was on the noise floor, so not valid { // whatever the value of pm_high_agc, we consider it // as the right setting new_IL = IL_high_agc; pm = pm_high_agc; } else { // pm_low_agc is valid. if (IL_high_agc<=l1_config.params.high_agc_sat_thr) { // pm_high_agc is not valid, it's saturated. new_IL = IL_low_agc; pm = pm_low_agc; } else { // both pm_low_agc and pm_high_agc are valid, so we test the one that // gives the maximum input level and consider it as the right setting. if (IL_high_agc<=IL_low_agc) { new_IL = IL_high_agc; pm = pm_high_agc; } else { new_IL = IL_low_agc; pm = pm_low_agc; } } } } #if (TRACE_TYPE == 1) || (TRACE_TYPE == 4) RTTL1_FILL_MON_MEAS(pm_high_agc, IL_high_agc - delta1_freq - delta2_freq, MS_AGC_ID, radio_freq) RTTL1_FILL_MON_MEAS(pm_low_agc, IL_low_agc - delta1_freq - delta2_freq, MS_AGC_ID, radio_freq) #endif current_calibrated_IL = new_IL - delta1_freq - delta2_freq; // Protect IL stores against overflow if (current_calibrated_IL>INDEX_MAX) current_calibrated_IL=INDEX_MAX; if (new_IL>INDEX_MAX) new_IL=INDEX_MAX; // Updating of input_level and lna_off fields in order to correctly // setting the AGC for the next task. l1ctl_encode_lna((UWORD8)(current_calibrated_IL>>1), &(l1a_l1s_com.last_input_level[index].lna_off), radio_freq); l1a_l1s_com.last_input_level[index].input_level = (UWORD8)new_IL + l1ctl_get_lna_att(radio_freq) * l1a_l1s_com.last_input_level[index].lna_off; } /*-------------------------------------------------------*/ /* l1ctl_find_max() */ /*-------------------------------------------------------*/ /* Parameters : */ /* Return : */ /* Functionality : */ /*-------------------------------------------------------*/ UWORD8 l1ctl_find_max(UWORD8 *buff, UWORD8 buffer_len) { // WARNING: for array index purpose we work with POSITIVE input level // so maximum search for negative numbers is equivalent to // minimum search for positive numbers!!!!!! // (-30 > -120 but 30 < 120) UWORD8 maximum = 240; UWORD8 i; for (i=0; i<buffer_len; i++) { if (buff[i]<maximum) maximum=buff[i]; } return(maximum); } /*-------------------------------------------------------*/ /* l1ctl_pagc() */ /*-------------------------------------------------------*/ /* Description : */ /* =========== */ /* We deduce the last_known_agc from the last stored */ /* input_level for the considered carrier. We use this */ /* agc value to "build" the input level linked to the pm */ /* we have just read. */ /* This input level is used to feed a fifo of 4 elements */ /* and then compute an input_level maximum. This value is*/ /* used to update the input_level for this carrier. This */ /* input_level will be used for the next task to control.*/ /*-------------------------------------------------------*/ UWORD8 l1ctl_pagc(UWORD8 pm, UWORD16 radio_freq, T_INPUT_LEVEL *IL_info_ptr) { WORD8 delta1_freq, delta2_freq; WORD16 delta_drp_gain=0; WORD32 last_known_agc; UWORD8 IL_max; WORD32 current_IL, current_calibrated_IL; UWORD8 i; WORD32 lna_value; #if (RF_FAM == 61) && (CODE_VERSION != SIMULATION) UWORD16 arfcn; #endif UWORD8 lna_off; UWORD16 dco_algo_ctl_pw_temp = 0; UWORD8 if_ctl = 0; #if (RF_FAM == 61) && (CODE_VERSION != SIMULATION) UWORD8 if_threshold = C_IF_ZERO_LOW_THRESHOLD_GSM; #endif delta1_freq = l1ctl_encode_delta1(radio_freq); delta2_freq = l1ctl_encode_delta2(radio_freq); // Update fifo for (i=3;i>0;i--) l1a_l1s_com.Scell_info.buff_beacon[i]=l1a_l1s_com.Scell_info.buff_beacon[i-1]; // from the lna state (ON/OFF) we compute the attenuation // that was applied to signal when performing the power // measure. lna_value = l1a_l1s_com.Scell_used_IL_dd.lna_off * l1ctl_get_lna_att(radio_freq); // Compute applied agc for this pm last_known_agc = (Cust_get_agc_from_IL(radio_freq, l1a_l1s_com.Scell_used_IL_dd.input_level >> 1, MAX_ID)) << 1; // F7.1 in order to be compatible // with pm and IL formats // contain the input_level value we use // in the associated CTL task to build // the agc used in this CTL. #if (RF_FAM == 61) && (CODE_VERSION != SIMULATION) #if (L1_FF_MULTIBAND == 0) arfcn = Convert_l1_radio_freq(radio_freq); #else arfcn = radio_freq; #endif #endif #if(RF_FAM == 61) #if (CODE_VERSION != SIMULATION) cust_get_if_dco_ctl_algo(&dco_algo_ctl_pw_temp, &if_ctl, (UWORD8) L1_IL_VALID , l1a_l1s_com.Scell_used_IL_dd.input_level, radio_freq,if_threshold); lna_off = l1a_l1s_com.Scell_used_IL_dd.lna_off; delta_drp_gain = drp_gain_correction(arfcn, lna_off, last_known_agc); // F7.1 format if(if_ctl == IF_100KHZ_DSP){ delta_drp_gain += SCF_ATTENUATION_LIF_100KHZ; } else{ /* i.e. if_ctl = IF_120KHZ_DSP*/ delta_drp_gain += SCF_ATTENUATION_LIF_120KHZ; } #endif #endif if (0==pm) // Check and filter illegal pm value by using last valid IL current_IL = IL_info_ptr->input_level - lna_value; else current_IL = -(pm - (last_known_agc - delta_drp_gain) + lna_value - l1ctl_get_g_magic(radio_freq)); current_calibrated_IL = current_IL - delta1_freq - delta2_freq; // Protect IL stores against overflow if (current_calibrated_IL>INDEX_MAX) current_calibrated_IL=INDEX_MAX; if (current_IL>INDEX_MAX) current_IL=INDEX_MAX; l1a_l1s_com.Scell_info.buff_beacon[0] = (UWORD8)current_IL; IL_max = l1ctl_find_max(&(l1a_l1s_com.Scell_info.buff_beacon[0]),4); //input levels are always stored with lna_on l1ctl_encode_lna( (UWORD8)(current_calibrated_IL>>1), &(IL_info_ptr->lna_off), radio_freq ); IL_info_ptr->input_level = IL_max + l1ctl_get_lna_att(radio_freq) * IL_info_ptr->lna_off; #if L2_L3_SIMUL #if (DEBUG_TRACE==BUFFER_TRACE_PAGC) buffer_trace(4,IL_info_ptr->input_level,last_known_agc, l1a_l1s_com.Scell_used_IL_dd.input_level,Cust_get_agc_from_IL(radio_freq, IL_max >> 1, MAX_ID)); #endif #endif return((UWORD8)current_calibrated_IL); } /*-------------------------------------------------------*/ /* l1ctl_dpagc() */ /*-------------------------------------------------------*/ /* Description : */ /* =========== */ /* Based on the same principle as the one used for PAGC */ /* algorithm except that we feed 3 different fifo: */ /* 1) one is dedicated to BCCH carrier */ /* 2) another one is dedicated to all the other type of */ /* bursts */ /* 3) the last one is dedicated to non DTX influenced */ /* bursts */ /*-------------------------------------------------------*/ UWORD8 l1ctl_dpagc(BOOL dtx_on, BOOL beacon, UWORD8 pm, UWORD16 radio_freq, T_INPUT_LEVEL *IL_info_ptr) { UWORD8 av_G_all, av_G_DTX; UWORD8 max_G_all, max_G_DTX; WORD32 last_known_agc, new_IL, current_calibrated_IL; WORD8 delta1_freq, delta2_freq; WORD16 delta_drp_gain=0; UWORD8 i; UWORD8 *tab_ptr; T_DEDIC_SET *aset; WORD32 lna_value; #if (RF_FAM == 61) && (CODE_VERSION != SIMULATION) UWORD16 arfcn; #endif UWORD8 lna_off; UWORD16 dco_algo_ctl_pw_temp = 0; UWORD8 if_ctl = 0; #if (RF_FAM == 61) && (CODE_VERSION != SIMULATION) UWORD8 if_threshold = C_IF_ZERO_LOW_THRESHOLD_GSM; #endif delta1_freq = l1ctl_encode_delta1(radio_freq); delta2_freq = l1ctl_encode_delta2(radio_freq); aset = l1a_l1s_com.dedic_set.aset; if (beacon) tab_ptr = l1a_l1s_com.Scell_info.buff_beacon; else tab_ptr = aset->G_all; // Update fifo for (i=DPAGC_FIFO_LEN-1;i>0;i--) tab_ptr[i]=tab_ptr[i-1]; #if TESTMODE if (!l1_config.agc_enable) { // AGC gain can only be controlled in 2dB steps as the bottom bit (bit zero) // corresponds to the lna_off bit last_known_agc = (l1_config.tmode.rx_params.agc) << 1; lna_value = (l1_config.tmode.rx_params.lna_off) * l1ctl_get_lna_att(radio_freq); } else #endif { #if DPAGC_MAX_FLAG last_known_agc = (Cust_get_agc_from_IL(radio_freq, l1a_l1s_com.Scell_used_IL_dd.input_level >> 1, MAX_ID)) << 1; // F7.1 in order to be compatible with pm and IL formats #else last_known_agc = (Cust_get_agc_from_IL(radio_freq, l1a_l1s_com.Scell_used_IL_dd.input_level >> 1, AV_ID)) << 1; // F7.1 in order to be compatible with pm and IL formats #endif // input_level_dd : contain the input_level value we use // in the associated CTL task to build the agc used in this CTL. lna_value = l1a_l1s_com.Scell_used_IL_dd.lna_off * l1ctl_get_lna_att(radio_freq); } #if (RF_FAM == 61) && (CODE_VERSION != SIMULATION) #if (L1_FF_MULTIBAND == 0) arfcn = Convert_l1_radio_freq(radio_freq); #else arfcn = radio_freq; #endif #endif #if(RF_FAM == 61) #if (CODE_VERSION != SIMULATION) cust_get_if_dco_ctl_algo(&dco_algo_ctl_pw_temp, &if_ctl, (UWORD8) L1_IL_VALID , l1a_l1s_com.Scell_used_IL_dd.input_level, radio_freq,if_threshold); lna_off = l1a_l1s_com.Scell_used_IL_dd.lna_off; delta_drp_gain = drp_gain_correction(arfcn, lna_off, last_known_agc); // F7.1 format if(if_ctl == IF_100KHZ_DSP){ delta_drp_gain += SCF_ATTENUATION_LIF_100KHZ; } else{ /* i.e. if_ctl = IF_120KHZ_DSP*/ delta_drp_gain += SCF_ATTENUATION_LIF_120KHZ; } #endif #endif if (0==pm) // Check and filter illegal pm value by using last valid IL new_IL = IL_info_ptr->input_level - lna_value; else new_IL = -(pm - (last_known_agc - delta_drp_gain) + lna_value - l1ctl_get_g_magic(radio_freq)); current_calibrated_IL = new_IL - delta1_freq - delta2_freq; // Protect IL stores against overflow if (current_calibrated_IL>INDEX_MAX) current_calibrated_IL=INDEX_MAX; #if TESTMODE if (l1tm.tmode_state.dedicated_active) // Implies l1_config.TestMode = 1 { // Update l1tm.tmode_stats.rssi_fifo (delay line from index 3 to 0) for (i=(sizeof(l1tm.tmode_stats.rssi_fifo)/sizeof(l1tm.tmode_stats.rssi_fifo[0]))-1; i>0; i--) { l1tm.tmode_stats.rssi_fifo[i] = l1tm.tmode_stats.rssi_fifo[i-1]; } l1tm.tmode_stats.rssi_fifo[0] = current_calibrated_IL; // rssi value is F7.1 l1tm.tmode_stats.rssi_recent = current_calibrated_IL; // rssi value is F7.1 } #endif if (new_IL>INDEX_MAX) new_IL=INDEX_MAX; tab_ptr[0] = (UWORD8)new_IL; if (dtx_on && !beacon) { // Update DTX fifo for (i=DPAGC_FIFO_LEN-1;i>0;i--) aset->G_DTX[i]=aset->G_DTX[i-1]; aset->G_DTX[0]=tab_ptr[0]; } /* Computation of MAX{G_all[i],G_DTX[j]} i,j=0..3 */ #if DPAGC_MAX_FLAG max_G_all = l1ctl_find_max(&(tab_ptr[0]),DPAGC_FIFO_LEN); if (!beacon) { max_G_DTX = l1ctl_find_max(&(aset->G_DTX[0]),DPAGC_FIFO_LEN); // WARNING: for array index purpose we work with POSITIVE input level // so maximum search for negative numbers is equivalent to // minimum search for positive numbers!!!!!! // (-30 > -120 but 30 < 120) if (max_G_all <= max_G_DTX) new_IL = max_G_all; else new_IL = max_G_DTX; } else new_IL = max_G_all; #else av_G_all=av_G_DTX=0; for (i=0;i<DPAGC_FIFO_LEN;i++) av_G_all += tab_ptr[i]; av_G_all /= DPAGC_FIFO_LEN; if (!beacon) { for (i=0;i<DPAGC_FIFO_LEN;i++) av_G_DTX += aset->G_DTX[i]; av_G_DTX /= DPAGC_FIFO_LEN; if (av_G_all >= av_G_DTX) new_IL = av_G_all; else new_IL = av_G_DTX; } else new_IL = av_G_all; #endif // Updating of input_level and lna_off fields in order to correctly // setting the AGC for the next task. // input_level is always store with lna_on l1ctl_encode_lna( (UWORD8)(current_calibrated_IL>>1), &(IL_info_ptr->lna_off), radio_freq ); IL_info_ptr->input_level = (UWORD8)new_IL + l1ctl_get_lna_att(radio_freq) * IL_info_ptr->lna_off; #if L2_L3_SIMUL #if (DEBUG_TRACE==BUFFER_TRACE_DPAGC) buffer_trace(4,IL_info_ptr->input_level,last_known_agc, l1a_l1s_com.Scell_used_IL_dd.input_level,Cust_get_agc_from_IL(radio_freq, new_IL >> 1, MAX_ID)); #endif #endif return((UWORD8)current_calibrated_IL); } #if (AMR == 1) /*-------------------------------------------------------*/ /* l1ctl_dpagc_amr() */ /*-------------------------------------------------------*/ /* Description : */ /* =========== */ /* Based on the same principle as the one used for DPAGC */ /* algorithm except that the way to feed the G_dtx is */ /* different */ /*-------------------------------------------------------*/ UWORD8 l1ctl_dpagc_amr(BOOL dtx_on, BOOL beacon, UWORD8 pm, UWORD16 radio_freq, T_INPUT_LEVEL *IL_info_ptr) { UWORD8 av_G_all, av_G_DTX; UWORD8 max_G_all, max_G_DTX, max_il; WORD32 last_known_agc, new_IL, current_calibrated_IL; WORD8 delta1_freq, delta2_freq; WORD16 delta_drp_gain=0; UWORD8 i; UWORD8 *tab_ptr, *tab_amr_ptr; T_DEDIC_SET *aset; WORD32 lna_value; #if (RF_FAM == 61) && (CODE_VERSION != SIMULATION) UWORD16 arfcn; #endif UWORD8 lna_off; UWORD16 dco_algo_ctl_pw_temp = 0; UWORD8 if_ctl = 0; #if (RF_FAM == 61) && (CODE_VERSION != SIMULATION) UWORD8 if_threshold = C_IF_ZERO_LOW_THRESHOLD_GSM; #endif delta1_freq = l1ctl_encode_delta1(radio_freq); delta2_freq = l1ctl_encode_delta2(radio_freq); aset = l1a_l1s_com.dedic_set.aset; if (beacon) tab_ptr = l1a_l1s_com.Scell_info.buff_beacon; else tab_ptr = aset->G_all; // Update fifo for (i=DPAGC_FIFO_LEN-1;i>0;i--) tab_ptr[i]=tab_ptr[i-1]; tab_amr_ptr = aset->G_amr; for (i=DPAGC_AMR_FIFO_LEN-1;i>0;i--) tab_amr_ptr[i]=tab_amr_ptr[i-1]; #if TESTMODE if (!l1_config.agc_enable) { // AGC gain can only be controlled in 2dB steps as the bottom bit (bit zero) // corresponds to the lna_off bit last_known_agc = (l1_config.tmode.rx_params.agc) << 1; lna_value = (l1_config.tmode.rx_params.lna_off) * l1ctl_get_lna_att(radio_freq); } else #endif { #if DPAGC_MAX_FLAG last_known_agc = (Cust_get_agc_from_IL(radio_freq, l1a_l1s_com.Scell_used_IL_dd.input_level >> 1, MAX_ID)) << 1; // F7.1 in order to be compatible with pm and IL formats #else last_known_agc = (Cust_get_agc_from_IL(radio_freq, l1a_l1s_com.Scell_used_IL_dd.input_level >> 1, AV_ID)) << 1; // F7.1 in order to be compatible with pm and IL formats #endif // input_level_dd : contain the input_level value we use // in the associated CTL task to build the agc used in this CTL. lna_value = l1a_l1s_com.Scell_used_IL_dd.lna_off * l1ctl_get_lna_att(radio_freq); } #if (RF_FAM == 61) && (CODE_VERSION != SIMULATION) #if (L1_FF_MULTIBAND == 0) arfcn = Convert_l1_radio_freq(radio_freq); #else arfcn = radio_freq; #endif #endif #if(RF_FAM == 61) #if (CODE_VERSION != SIMULATION) cust_get_if_dco_ctl_algo(&dco_algo_ctl_pw_temp, &if_ctl, (UWORD8) L1_IL_VALID , l1a_l1s_com.Scell_used_IL_dd.input_level, radio_freq,if_threshold); lna_off = l1a_l1s_com.Scell_used_IL_dd.lna_off; delta_drp_gain = drp_gain_correction(arfcn, lna_off, last_known_agc); // F7.1 format if(if_ctl == IF_100KHZ_DSP){ delta_drp_gain += SCF_ATTENUATION_LIF_100KHZ; } else{ /* i.e. if_ctl = IF_120KHZ_DSP*/ delta_drp_gain += SCF_ATTENUATION_LIF_120KHZ; } #endif #endif if (0==pm) // Check and filter illegal pm value by using last valid IL new_IL = IL_info_ptr->input_level - lna_value; else new_IL = -(pm - (last_known_agc - delta_drp_gain) + lna_value - l1ctl_get_g_magic(radio_freq)); current_calibrated_IL = new_IL - delta1_freq - delta2_freq; // Protect IL stores against overflow if (current_calibrated_IL>INDEX_MAX) current_calibrated_IL=INDEX_MAX; #if TESTMODE if (l1tm.tmode_state.dedicated_active) // Implies l1_config.TestMode = 1 { // Update l1tm.tmode_stats.rssi_fifo (delay line from index 3 to 0) for (i=(sizeof(l1tm.tmode_stats.rssi_fifo)/sizeof(l1tm.tmode_stats.rssi_fifo[0]))-1; i>0; i--) { l1tm.tmode_stats.rssi_fifo[i] = l1tm.tmode_stats.rssi_fifo[i-1]; } l1tm.tmode_stats.rssi_fifo[0] = current_calibrated_IL; // rssi value is F7.1 l1tm.tmode_stats.rssi_recent = current_calibrated_IL; // rssi value is F7.1 } #endif if (new_IL>INDEX_MAX) new_IL=INDEX_MAX; tab_ptr[0] = (UWORD8)new_IL; tab_amr_ptr[0] = (UWORD8)new_IL; if (dtx_on && !beacon) { // a new AMR block is received, feed the G_dtx with the max_il of the block for (i=DPAGC_FIFO_LEN-1;i>0;i--) aset->G_DTX[i]=aset->G_DTX[i-1]; if (l1a_l1s_com.dedic_set.aset->achan_ptr->mode == TCH_AHS_MODE) { // Keep the max_il between the last 2 bursts if (aset->G_amr[0] > aset->G_amr[1]) max_il = aset->G_amr[0]; else max_il = aset->G_amr[1]; } else { // Keep the max_il between the last 4 bursts max_il = l1ctl_find_max(&aset->G_amr[0], DPAGC_AMR_FIFO_LEN); } aset->G_DTX[0]= max_il; } /* Computation of MAX{G_all[i],G_DTX[j]} i,j=0..3 */ #if DPAGC_MAX_FLAG max_G_all = l1ctl_find_max(&(tab_ptr[0]),DPAGC_FIFO_LEN); if (!beacon) { max_G_DTX = l1ctl_find_max(&(aset->G_DTX[0]),DPAGC_FIFO_LEN); // WARNING: for array index purpose we work with POSITIVE input level // so maximum search for negative numbers is equivalent to // minimum search for positive numbers!!!!!! // (-30 > -120 but 30 < 120) if (max_G_all <= max_G_DTX) new_IL = max_G_all; else new_IL = max_G_DTX; } else new_IL = max_G_all; #else av_G_all=av_G_DTX=0; for (i=0;i<DPAGC_FIFO_LEN;i++) av_G_all += tab_ptr[i]; av_G_all /= DPAGC_FIFO_LEN; if (!beacon) { for (i=0;i<DPAGC_FIFO_LEN;i++) av_G_DTX += aset->G_DTX[i]; av_G_DTX /= DPAGC_FIFO_LEN; if (av_G_all >= av_G_DTX) new_IL = av_G_all; else new_IL = av_G_DTX; } else new_IL = av_G_all; #endif // Updating of input_level and lna_off fields in order to correctly // setting the AGC for the next task. // input_level is always store with lna_on l1ctl_encode_lna( (UWORD8)(current_calibrated_IL>>1), &(IL_info_ptr->lna_off), radio_freq ); IL_info_ptr->input_level = (UWORD8)new_IL + l1ctl_get_lna_att(radio_freq) * IL_info_ptr->lna_off; #if L2_L3_SIMUL #if (DEBUG_TRACE==BUFFER_TRACE_DPAGC) buffer_trace(4,IL_info_ptr->input_level,last_known_agc, l1a_l1s_com.Scell_used_IL_dd.input_level,Cust_get_agc_from_IL(radio_freq, new_IL >> 1, MAX_ID)); #endif #endif return((UWORD8)current_calibrated_IL); } #endif // AMR == 1 /*-------------------------------------------------------*/ /* l1ctl_get_g_magic() */ /*-------------------------------------------------------*/ /* Parameters : */ /* Return : */ /* Functionality : */ /*-------------------------------------------------------*/ #if (L1_FF_MULTIBAND == 0) UWORD16 l1ctl_get_g_magic(UWORD16 radio_freq) { if ((l1_config.std.id == DUAL) || (l1_config.std.id == DUALEXT) || (l1_config.std.id == DUAL_US)) { if (radio_freq >= l1_config.std.first_radio_freq_band2) return(l1_config.std.g_magic_band2); else return(l1_config.std.g_magic_band1); } else return(l1_config.std.g_magic_band1); } #endif /*-------------------------------------------------------*/ /* l1ctl_get_lna_att() */ /*-------------------------------------------------------*/ /* Parameters : */ /* Return : */ /* Functionality : */ /*-------------------------------------------------------*/ #if (L1_FF_MULTIBAND == 0) UWORD16 l1ctl_get_lna_att(UWORD16 radio_freq) { if ((l1_config.std.id == DUAL) || (l1_config.std.id == DUALEXT) || (l1_config.std.id == DUAL_US)) { if (radio_freq >= l1_config.std.first_radio_freq_band2) return(l1_config.std.lna_att_band2); else return(l1_config.std.lna_att_band1); } else return(l1_config.std.lna_att_band1); } #endif /*-------------------------------------------------------*/ /* l1ctl_update_TPU_with_toa() */ /*-------------------------------------------------------*/ /* Parameters : */ /* Return : */ /* Functionality : */ /*-------------------------------------------------------*/ void l1ctl_update_TPU_with_toa(void) { #if (TOA_ALGO != 0) WORD16 toa_shift; #if (TOA_ALGO == 2) toa_shift = l1s.toa_var.toa_shift; #else toa_shift = l1s.toa_shift; #endif if (toa_shift != ISH_INVALID) // New ISH (TOA shift) has been stored in "l1s.toa_shift". { // NEW !!! For EOTD measurements in IDLE mode, cut AFC updates... #if (L1_EOTD==1) #if (L1_GPRS) if ( (l1a_l1s_com.nsync.eotd_meas_session == FALSE) || (l1a_l1s_com.mode == DEDIC_MODE)|| (l1a_l1s_com.l1s_en_task[PDTCH] == TASK_ENABLED)) #else if ( (l1a_l1s_com.nsync.eotd_meas_session == FALSE) || (l1a_l1s_com.mode == DEDIC_MODE)) #endif { // In dedicated or transfer modes we need to track an TOA // updates to post correct th results, else E-OTD implementation // has qb errors... if( (l1a_l1s_com.nsync.eotd_meas_session == TRUE) && (l1a_l1s_com.nsync.eotd_toa_phase == 1) ) { l1a_l1s_com.nsync.eotd_toa_tracking += toa_shift; } #endif // Update tpu offset. l1s.tpu_offset = (l1s.tpu_offset + TPU_CLOCK_RANGE + toa_shift) % TPU_CLOCK_RANGE; #if (TRACE_TYPE==1) || (TRACE_TYPE==4) #if (GSM_IDLE_RAM == 0) l1_trace_new_toa(); #else l1_trace_new_toa_intram(); #endif #endif #if (L1_EOTD==1) } #endif #if (TRACE_TYPE == 5) #if (TOA_ALGO == 2) trace_toa_sim_update (toa_shift,l1s.tpu_offset); #endif #endif // Reset ISH. #if (TOA_ALGO == 2) l1s.toa_var.toa_shift = ISH_INVALID; // Reset the ISH. #else l1s.toa_shift = ISH_INVALID; // Reset the ISH. #endif } #endif } /*-------------------------------------------------------*/ /* l1ctl_saic() */ /*-------------------------------------------------------*/ /* Parameters : */ /* Return : */ /* Functionality : */ /*-------------------------------------------------------*/ #if (L1_SAIC != 0) #define SWH_CHANTAP_INIT 0xFFD068CE #if (NEW_SNR_THRESHOLD == 1) UWORD8 l1ctl_saic (UWORD8 IL_for_rxlev, UWORD32 l1_mode, UWORD8 task, UWORD8 * saic_flag) #else UWORD8 l1ctl_saic (UWORD8 IL_for_rxlev, UWORD32 l1_mode) #endif /* NEW_SNR_THRESHOLD */ { UWORD16 SWH_flag = 0; UWORD8 CSF_Filter_choice = L1_SAIC_HARDWARE_FILTER; #if (NEW_SNR_THRESHOLD == 0) volatile UWORD16 *ptr; UWORD8 saic_flag; #endif /* NEW_SNR_THRESHOLD */ #if (NEW_SNR_THRESHOLD == 0) ptr = (volatile UWORD16 * ) (SWH_CHANTAP_INIT); *ptr = 0; saic_flag=1; #else *saic_flag=0; #endif switch (l1_mode) { case DEDIC_MODE: // GSM DEDICATED MODE { #if (NEW_SNR_THRESHOLD == 1) *saic_flag=1; #endif if(IL_for_rxlev < L1_SAIC_GENIE_GSM_DEDIC_THRESHOLD) { SWH_flag=1; } break; } #if L1_GPRS case PACKET_TRANSFER_MODE: // PACKET TRANSFER MODE { #if (NEW_SNR_THRESHOLD == 0) #if (L1_SAIC == 1) if(IL_for_rxlev < L1_SAIC_GENIE_GPRS_PCKT_TRAN_THRESHOLD) { *ptr = 4; } #endif /*#if (L1_SAIC == 3)*/ #endif #if (L1_SAIC == 3) if(IL_for_rxlev < L1_SAIC_GENIE_GPRS_PCKT_TRAN_THRESHOLD) { SWH_flag = 1; } #endif /*#if (L1_SAIC == 3)*/ break; } #endif /*#if L1_GPRS*/ default: /* GSM OR GPRS IDLE MODES */ { #if ((L1_SAIC == 2)||(L1_SAIC == 3)) if(IL_for_rxlev < L1_SAIC_GENIE_GSM_GPRS_IDLE_THRESHOLD) { SWH_flag=1; } #endif break; } } l1ddsp_load_swh_flag (SWH_flag , #if (NEW_SNR_THRESHOLD == 0) saic_flag #else *saic_flag #endif ); if(SWH_flag == 1) { CSF_Filter_choice = L1_SAIC_PROGRAMMABLE_FILTER; } #if (TRACE_TYPE == 1) || (TRACE_TYPE == 4) l1_trace_saic(SWH_flag, #if (NEW_SNR_THRESHOLD == 0) saic_flag #else *saic_flag #endif ); #endif #if (TRACE_TYPE == 5) trace_saic_sim(IL_for_rxlev, l1_mode, SWH_flag); #endif return(CSF_Filter_choice); } #endif #if (FF_L1_FAST_DECODING == 1) /*-----------------------------------------------------------------*/ /* l1ctl_pagc_missing_bursts */ /*-----------------------------------------------------------------*/ /* */ /* Description: */ /* ------------ */ /* When fast decoding is active, fewer bursts are decoded. As a */ /* result, fewer gain values are available. The PAGC algo must */ /* be updated with the missed values. */ /* */ /* Input parameters: */ /* ----------------- */ /* UWORD8 skipped_values: the number of skipped bursts due to fast */ /* decoding. */ /* */ /* Input parameters from globals: */ /* ------------------------------ */ /* l1a_l1s_com.Scell_info.buff_beacon: Input Level (IL) FIFO */ /* l1_config.params.il_min: minimum level */ /* */ /* Output parameters: */ /* ------------------ */ /* none */ /* */ /* Modified parameters from globals: */ /* --------------------------------- */ /* l1a_l1s_com.Scell_info.buff_beacon: Input Level (IL) FIFO */ /* */ /*-----------------------------------------------------------------*/ void l1ctl_pagc_missing_bursts (UWORD8 skipped_values) { UWORD8 i = 0; /* skipped_values cannot be greater than 3, otherwise this is an error * and the PAGC algorithm mustn't be updated. */ if (skipped_values > 3) { return; } /* Update fifo by removing skipped_values of samples */ for (i = 3; i > (skipped_values - 1); i--) { l1a_l1s_com.Scell_info.buff_beacon[i] = l1a_l1s_com.Scell_info.buff_beacon[i-skipped_values]; } /* Insert minimum IL level as many times a burst has been skipped */ for (i = 0; i < skipped_values; i++) { l1a_l1s_com.Scell_info.buff_beacon[i] = l1_config.params.il_min; } } #endif /* #if (FF_L1_FAST_DECODING == 1) */