board preprocessor conditionals: prep for more FC hw in the future This change eliminates the CONFIG_TARGET_FCDEV3B preprocessor symbol and all preprocessor conditionals throughout the code base that tested for it, replacing them with CONFIG_TARGET_FCFAM or CONFIG_TARGET_FCMODEM. These new symbols are specified as follows: CONFIG_TARGET_FCFAM is intended to cover all hardware designs created by Mother Mychaela under the FreeCalypso trademark. This family will include modem products (repackagings of the FCDEV3B, possibly with RFFE or even RF transceiver changes), and also my desired FreeCalypso handset product. CONFIG_TARGET_FCMODEM is intended to cover all FreeCalypso modem products (which will be firmware-compatible with the FCDEV3B if they use TI Rita transceiver, or will require a different fw build if we switch to one of Silabs Aero transceivers), but not the handset product. Right now this CONFIG_TARGET_FCMODEM preprocessor symbol is used to conditionalize everything dealing with MCSI. At the present moment the future of FC hardware evolution is still unknown: it is not known whether we will ever have any beyond-FCDEV3B hardware at all (contingent on uncertain funding), and if we do produce further FC hardware designs, it is not known whether they will retain the same FIC modem core (triband), if we are going to have a quadband design that still retains the classic Rita transceiver, or if we are going to switch to Silabs Aero II or some other transceiver. If we produce a quadband modem that still uses Rita, it will run exactly the same fw as the FCDEV3B thanks to the way we define TSPACT signals for the RF_FAM=12 && CONFIG_TARGET_FCFAM combination, and the current fcdev3b build target will be renamed to fcmodem. OTOH, if that putative quadband modem will be Aero-based, then it will require a different fw build target, the fcdev3b target will stay as it is, and the two targets will both define CONFIG_TARGET_FCFAM and CONFIG_TARGET_FCMODEM, but will have different RF_FAM numbers. But no matter which way we are going to evolve, it is not right to have conditionals on CONFIG_TARGET_FCDEV3B in places like ACI, and the present change clears the way for future evolution.

/**
 * @file	rv_test_regr.h
 *
 * Definitions used for non-regression tests.
 *
 * @author	Cedric Baudelet
 * @author	Vincent Oberle
 */

/*
 * History:
 *
 *	Date       	Author					Modification
 *	-------------------------------------------------------------------
 *	09/29/00	Cedric Baudelet			Create.
 *	03/15/02	Vincent Oberle			Passed all remaining macros into function.
 *										Comment and formating cleaning.
 *
 * (C) Copyright 2002 by Texas Instruments Incorporated, All Rights Reserved
 */

#ifndef _RV_TEST_REGR_H_
#define _RV_TEST_REGR_H_

#include "tests/rv/rv_test.h"

#ifdef __cplusplus
extern "C"
{
#endif


/*
 * DO NOT MODIFY THIS FILE!
 * Add your test in the corresponding .c file only.
 */


/**
 * Define the MAX number of tests which it will be possible to execute during
 * the regression.
 */
#define MAX_NB_OF_TEST_TO_PASS (200)

/** Non-Regression test error type */
typedef T_RV_TEST_ERR_TYPE T_RV_REGR_ERR_TYPE;

/** Non-Regression test return value type */
typedef T_RV_TEST_RET T_RV_REGR_RET;


/** Non-Regression test configuration parameter */
typedef enum {
	TEST_LIST					=  0, /* Allows to execute chosen tests				*/
	TEST_LIST_RAND				= -2, /* Allows to execute rand chosen tests		*/ 
	TEST_ALL					= -3, /* Allows to execute all tests available		*/
	TEST_ALL_RAND				= -4  /* Allows to execute rand all tests available	*/
} T_RV_REGR_TEST_CFG;


/** Non-Regression test list contents */
typedef UINT8 T_RV_REGR_TEST_LIST_NBR;
typedef UINT8 T_RV_REGR_TEST_LIST_CFG;

#define CONFIG_A (0) /* DEVICE_A = SOURCE & DEVICE_B = TARGET	*/
#define CONFIG_B (1) /* DEVICE_A = TARGET & DEVICE_B = SOURCE	*/

typedef struct {
    T_RV_REGR_TEST_LIST_NBR	list_nbr;	/* Number of the executed test			*/
	T_RV_REGR_TEST_LIST_CFG	list_cfg;	/* Configuration of the executed test	*/
} T_RV_REGR_TEST_LIST;


/** Non-Regression test total number of tests */
typedef UINT16 T_RV_REGR_TEST_TOT;

/** Non-Regression test nb of occurence of each test */
typedef UINT8 T_RV_REGR_TEST_OCC;

/** Non-Regression test initialization parameter */
#define RV_REGR_RAND_INIT (1)


#ifdef __cplusplus
}
#endif

#endif /* _RV_TEST_REGR_ */