FreeCalypso > hg > fc-magnetite
view src/g23m-aci/aci/cmh_mms.c @ 600:8f50b202e81f
board preprocessor conditionals: prep for more FC hw in the future
This change eliminates the CONFIG_TARGET_FCDEV3B preprocessor symbol and
all preprocessor conditionals throughout the code base that tested for it,
replacing them with CONFIG_TARGET_FCFAM or CONFIG_TARGET_FCMODEM. These
new symbols are specified as follows:
CONFIG_TARGET_FCFAM is intended to cover all hardware designs created by
Mother Mychaela under the FreeCalypso trademark. This family will include
modem products (repackagings of the FCDEV3B, possibly with RFFE or even
RF transceiver changes), and also my desired FreeCalypso handset product.
CONFIG_TARGET_FCMODEM is intended to cover all FreeCalypso modem products
(which will be firmware-compatible with the FCDEV3B if they use TI Rita
transceiver, or will require a different fw build if we switch to one of
Silabs Aero transceivers), but not the handset product. Right now this
CONFIG_TARGET_FCMODEM preprocessor symbol is used to conditionalize
everything dealing with MCSI.
At the present moment the future of FC hardware evolution is still unknown:
it is not known whether we will ever have any beyond-FCDEV3B hardware at all
(contingent on uncertain funding), and if we do produce further FC hardware
designs, it is not known whether they will retain the same FIC modem core
(triband), if we are going to have a quadband design that still retains the
classic Rita transceiver, or if we are going to switch to Silabs Aero II
or some other transceiver. If we produce a quadband modem that still uses
Rita, it will run exactly the same fw as the FCDEV3B thanks to the way we
define TSPACT signals for the RF_FAM=12 && CONFIG_TARGET_FCFAM combination,
and the current fcdev3b build target will be renamed to fcmodem. OTOH, if
that putative quadband modem will be Aero-based, then it will require a
different fw build target, the fcdev3b target will stay as it is, and the
two targets will both define CONFIG_TARGET_FCFAM and CONFIG_TARGET_FCMODEM,
but will have different RF_FAM numbers. But no matter which way we are
going to evolve, it is not right to have conditionals on CONFIG_TARGET_FCDEV3B
in places like ACI, and the present change clears the way for future
evolution.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Mon, 01 Apr 2019 01:05:24 +0000 |
parents | 53929b40109c |
children |
line wrap: on
line source
/* +----------------------------------------------------------------------------- | Project : GSM-PS (6147) | Modul : CMH_MMS +----------------------------------------------------------------------------- | Copyright 2002 Texas Instruments Berlin, AG | All rights reserved. | | This file is confidential and a trade secret of Texas | Instruments Berlin, AG | The receipt of or possession of this file does not convey | any rights to reproduce or disclose its contents or to | manufacture, use, or sell anything it may describe, in | whole, or in part, without the specific written consent of | Texas Instruments Berlin, AG. +----------------------------------------------------------------------------- | Purpose : This module provides the set functions related to the | protocol stack adapter for mobility management. +----------------------------------------------------------------------------- */ #ifndef CMH_MMS_C #define CMH_MMS_C #endif #include "aci_all.h" /*==== INCLUDES ===================================================*/ #include "aci_cmh.h" #include "rtc.h" #ifdef DTI #include "dti.h" /* functionality of the dti library */ #include "dti_conn_mng.h" #endif #include "aci_mem.h" #ifdef FAX_AND_DATA /* #include "aci_fd.h" */ #endif /* of #ifdef FAX_AND_DATA */ #include "psa.h" #include "psa_sim.h" #include "psa_mm.h" #include "cmh.h" #include "cmh_sim.h" #include "cmh_mm.h" #include "psa_cc.h" #include "cmh_cc.h" #ifdef GPRS #include "gaci.h" #include "gaci_cmh.h" #include "psa_gmm.h" #include "cmh_gmm.h" #endif #ifndef _SIMULATION_ /***************************/ /* TEMPORARY until NVM */ /* just to get FFs !!!! */ #ifndef GPRS #define DONT_LET_FFSH_DEF_GPRS #endif #include "ffs/ffs.h" #include "rx.h" #include "rtc.h" #ifdef FF_TIMEZONE #include "rv/rv_general.h" #include "rtc/rtc_tz.h" #endif /* check whether latter has defined GPRS !!! */ #ifdef DONT_LET_FFSH_DEF_GPRS #undef GPRS #endif #undef DONT_LET_FFSH_DEF_GPRS /***************************/ #endif /* _SIMULATION_ */ /*==== CONSTANTS ==================================================*/ /*==== EXPORT =====================================================*/ /*==== VARIABLES ==================================================*/ /*==== FUNCTIONS ==================================================*/ EXTERN void wake_up_rr (void); #ifdef TI_PS_FF_AT_P_CMD_CTREG EXTERN BOOL cl_shrd_set_treg_val(T_TREG *treg); #endif /* TI_PS_FF_AT_P_CMD_CTREG */ #ifndef _SIMULATION_ LOCAL void rx_Cb (drv_SignalID_Type *signal_params); LOCAL UCHAR rx_sequence_Cb (void* arg); #endif /* _SIMULATION_ */ /* +--------------------------------------------------------------------+ | PROJECT : GSM-PS (6147) MODULE : CMH_MMS | | STATE : code ROUTINE : sAT_PercentBAND | +--------------------------------------------------------------------+ PURPOSE : This is the functional counterpart to the %BAND AT command which is responsible for configuring the way the mobile deals with multiband. <bandMode>: band switch mode. <bandType>: band selection by user: coded in bitfield as following. Bit set to 1 if band is set, 0 otherwise... BITS: | 5 | 4 | 3 | 2 | 1 | | GSM850 | E_GSM | GSM1900 | GSM1800 | GSM900 | */ GLOBAL T_ACI_RETURN sAT_PercentBAND(T_ACI_CMD_SRC srcId, T_ACI_BAND_MODE bandMode, UBYTE bandType) { UBYTE ManufacturerBands; UBYTE ubyte_dummy; TRACE_FUNCTION("sAT_PercentBAND()"); /* check command source */ if(!cmh_IsVldCmdSrc (srcId)) { return( AT_FAIL ); } /* Check Parameter bandMode */ switch( bandMode ) { case( BAND_MODE_Auto ): bandType = 0x00; /* scan all */ break; case( BAND_MODE_Manual ): /* Check Parameter bandType */ if(cmhMM_getBandSettings(&ubyte_dummy, &ManufacturerBands)) { TRACE_FUNCTION("cmhMM_getBandSettings: data reading from FFS successful"); } else { TRACE_FUNCTION("cmhMM_getBandSettings: data reading from FFS failed"); } if( !cmhMM_isBandAllowed(bandType, ManufacturerBands) ) { TRACE_EVENT_P1("Band combination %d is not supported by this hardware", bandType); ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter ); return( AT_FAIL ); } break; default: ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter ); return( AT_FAIL ); } if( !cmhMM_writeSetBand(bandType) ) return(AT_FAIL); /* switch off radio */ if( CFUNfun EQ CFUN_FUN_Full ) { /* if mobile is on, proceed a soft switch off and then switch back on */ mmEntStat.curCmd = AT_CMD_BAND; return( sAT_PlusCFUN( srcId, CFUN_FUN_Disable_TX_RX_RF, CFUN_RST_NotPresent) ); } else { /* new configuration has been written to Flash and that's it ! */ return( AT_CMPL); } } /* +--------------------------------------------------------------------+ | PROJECT : GSM-PS (6147) MODULE : CMH_MMS | | STATE : code ROUTINE : sAT_PlusCOPS | +--------------------------------------------------------------------+ PURPOSE : This is the functional counterpart to the +COPS AT command which is responsible for selection and deselection of an network operator. <mode>: registration mode. <format>: format of operator selection <oper>: operator string */ GLOBAL T_ACI_RETURN sAT_PlusCOPS ( T_ACI_CMD_SRC srcId, T_ACI_COPS_MOD mode, T_ACI_COPS_FRMT format, CHAR * oper ) { return(sat_Plus_Percent_COPS(srcId, mode, format, oper, AT_CMD_COPS)); } /* +--------------------------------------------------------------------+ | PROJECT : GSM-PS (6147) MODULE : CMH_MMS | | STATE : code ROUTINE : sAT_PercentCOPS | +--------------------------------------------------------------------+ PURPOSE : This is the functional counterpart to the %COPS AT command which is responsible for selection and deselection of an network operator. %COPS will add, in principle, the following functionality to the standard AT command +COPS: -Possibility to query the "service status" in which the phone is currently registered; the possible values will be "full service", "limited service" or "no service". -Possibility to select the "last registered" operator using %COPS=1. <mode>: registration mode. <format>: format of operator selection <oper>: operator string */ GLOBAL T_ACI_RETURN sAT_PercentCOPS ( T_ACI_CMD_SRC srcId, T_ACI_COPS_MOD mode, T_ACI_COPS_FRMT format, CHAR * oper ) { return(sat_Plus_Percent_COPS(srcId, mode, format, oper, AT_CMD_P_COPS)); } #ifdef TI_PS_FF_AT_CMD_WS46 /* +--------------------------------------------------------------------+ | PROJECT : GSM-PS (6147) MODULE : CMH_MMS | | STATE : code ROUTINE : sAT_PlusWS46 | +--------------------------------------------------------------------+ PURPOSE : This is the functional counterpart to the +WS46 AT command which is responsible to select wireless network. <mode>: network mode. */ GLOBAL T_ACI_RETURN sAT_PlusWS46 (T_ACI_CMD_SRC srcId, T_ACI_WS46_MOD mode ) { TRACE_FUNCTION ("sAT_PlusWS46()"); /* *------------------------------------------------------------------- * process the value parameter *------------------------------------------------------------------- */ if( mode NEQ ACI_NumParmNotPresent ) { if( mode NEQ WS46_MOD_Gsm ) { ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter ); return( AT_FAIL ); } } return( AT_CMPL ); } #endif /* TI_PS_FF_AT_CMD_WS46 */ /* +--------------------------------------------------------------------+ | PROJECT : GSM-PS (6147) MODULE : CMH_MMS | | STATE : code ROUTINE : tAT_PercentALS | +--------------------------------------------------------------------+ PURPOSE : This is the functional counterpart to the %ALS AT command which is responsible for testing if ALS mode is present. (always if an E-Plus Sim-card is detected or the if the CSP field is present on the inserted Sim-card and enables ALS mode). */ GLOBAL T_ACI_RETURN tAT_PercentALS ( T_ACI_CMD_SRC srcId, T_ACI_ALS_MOD *ALSmode ) { TRACE_FUNCTION ("tAT_PercentALS()"); if( !cmh_IsVldCmdSrc( srcId ) ) { return( AT_FAIL ); } #if defined(FF_BAT) && defined(_SIMULATION_) /* test command %ALS is not used anymore by BAT.lib, change CMD MODE only for host tests */ if(aci_cmd_src_mode_get(srcId) EQ CMD_MODE_BAT) { aci_cmd_src_mode_set((UBYTE)srcId, CMD_MODE_ATI); } #endif /* FF_BAT && _SIMULATION_ */ /* E-Plus SIM-Card inserted (mcc=0x262, mnc=0x03) ? */ if (cmhSIM_plmn_is_hplmn(0x262, 0x03F)) { *ALSmode = (T_ACI_ALS_MOD)(ALS_MOD_SPEECH | ALS_MOD_AUX_SPEECH); return (AT_CMPL); } simEntStat.curCmd = AT_CMD_ALS; simShrdPrm.owner = (T_OWN)srcId; simEntStat.entOwn = srcId; ccShrdPrm.als_cmd = ALS_CMD_TEST; *ALSmode = ALS_MOD_NOTPRESENT; cmhCC_checkALS_Support(); return (AT_EXCT); } /* +--------------------------------------------------------------------+ | PROJECT : GSM-PS (6147) MODULE : CMH_MMS | | STATE : code ROUTINE : sAT_PercentNRG | +--------------------------------------------------------------------+ PURPOSE : This is the functional counterpart to the %NRG AT command which is responsible for the setting of registration mode and service mode. <regMode>: registration mode. <srvMode>: service mode. */ GLOBAL T_ACI_RETURN sAT_PercentNRG( T_ACI_CMD_SRC srcId, T_ACI_NRG_RGMD regMode, T_ACI_NRG_SVMD srvMode, T_ACI_NRG_FRMT oprFrmt, CHAR *opr) { T_MM_CMD_PRM * pMMCmdPrm; /* points to MM command parameters */ TRACE_FUNCTION ("sAT_PercentNRG()"); pMMCmdPrm = &cmhPrm[srcId].mmCmdPrm; /* *------------------------------------------------------------------- * check MM entity status *------------------------------------------------------------------- */ if( mmEntStat.curCmd NEQ AT_CMD_NONE ) return( AT_BUSY ); /* *------------------------------------------------------------------- * process the oprFrmt,svrMode and regMode parameters *------------------------------------------------------------------- */ switch( oprFrmt ) { case( NRG_FRMT_NotPresent ): oprFrmt = pMMCmdPrm -> NRGoprFrmt; break; case( NRG_FRMT_Long ): case( NRG_FRMT_Short ): case( NRG_FRMT_Numeric ): break; default: ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter ); return( AT_FAIL ); } if( srvMode EQ NRG_SVMD_NotPresent ) srvMode=(T_ACI_NRG_SVMD)pMMCmdPrm->NRGregMode; if( regMode EQ NRG_RGMD_NotPresent ) regMode=pMMCmdPrm->NRGregMode; /* Set the value of the current command executed */ mmEntStat.curCmd = AT_CMD_NRG; return cmhMM_OperatorSelect(srcId,regMode,srvMode,oprFrmt,opr); } /* +--------------------------------------------------------------------+ | PROJECT : ACI/MMI MODULE : CMH_MMS | | STATE : code ROUTINE : sAT_PercentCSQ | +--------------------------------------------------------------------+ PURPOSE : This is the function for Signal Quality Param: srcId: command ID; CSQmode: enable(1) or disable(0) CSQ Shen,Chao Juni.13th, 2003 */ GLOBAL T_ACI_RETURN sAT_PercentCSQ( T_ACI_CMD_SRC srcId, T_ACI_CSQ_MODE CSQmode) { T_MM_CMD_PRM * pMMCmdPrm; /* points to MM command parameters */ if( !cmh_IsVldCmdSrc( srcId ) ) { return( AT_FAIL ); } pMMCmdPrm = &cmhPrm[srcId].mmCmdPrm; switch(CSQmode) { case( CSQ_Enable): { if ( pMMCmdPrm->CSQworkStat EQ CSQ_Enable ) { TRACE_EVENT("CSQ is already enabled"); } else { cmhPrm[srcId].mmCmdPrm.CSQworkStat = CSQ_Enable; if( (pMMCmdPrm->sIndicationParam.sMmCINDSettings.sCindSignalParam <= CIND_SIGNAL_INDICATOR_LVL0) AND (pMMCmdPrm->sIndicationParam.sMmCMERSettings.sCmerIndParam NEQ CMER_INDICATOR_2) ) { /* rx_Init() not yet called from CIND service */ #ifndef _SIMULATION_ rx_Init(rx_Cb); #endif /* _SIMULATION_ */ } } break; } case(CSQ_Disable): { if ( pMMCmdPrm->CSQworkStat EQ CSQ_Enable ) { cmhPrm[srcId].mmCmdPrm.CSQworkStat = CSQ_Disable; if( (pMMCmdPrm->sIndicationParam.sMmCINDSettings.sCindSignalParam <= CIND_SIGNAL_INDICATOR_LVL0) && (pMMCmdPrm->sIndicationParam.sMmCMERSettings.sCmerIndParam NEQ CMER_INDICATOR_2) ) { /* CIND service inactive -> no more reading the signal strength necessary */ #ifndef _SIMULATION_ rx_Init(NULL); #endif /* _SIMULATION_ */ } } break; } default: return(AT_FAIL); } return( AT_CMPL); } /* +--------------------------------------------------------------------+ | PROJECT : ACI/MMI MODULE : CMH_MMS | | STATE : code ROUTINE : sAT_Plus CIND | +--------------------------------------------------------------------+ PURPOSE : This is the function to setup the indications toward terminal */ GLOBAL T_ACI_RETURN sAT_PlusCIND( T_ACI_CMD_SRC srcId, T_ACI_CIND_SIGNAL_TYPE sCindSgnalSettings, T_ACI_CIND_SMSFULL_TYPE sCindSmsFullSettings ) { T_ACI_MM_CIND_VAL_TYPE *pMMCindPrm; T_ACI_MM_CMER_VAL_TYPE *pMMCmerPrm; T_ACI_CIND_SIGNAL_TYPE sOldSignalSetting; TRACE_EVENT( "sAT_PlusCIND()" ); if( !cmh_IsVldCmdSrc( srcId ) ) { return( AT_FAIL ); } pMMCindPrm = &(cmhPrm[srcId].mmCmdPrm.sIndicationParam.sMmCINDSettings); pMMCmerPrm = &(cmhPrm[srcId].mmCmdPrm.sIndicationParam.sMmCMERSettings); if( sCindSgnalSettings EQ CIND_SIGNAL_INDICATOR_INVALID OR sCindSmsFullSettings EQ CIND_SMSFULL_INDICATOR_INVALID ) { ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter ); return( AT_FAIL ); } sOldSignalSetting = pMMCindPrm->sCindSignalParam; pMMCindPrm->sCindSignalParam = sCindSgnalSettings; pMMCindPrm->sCindSmsFullParam = sCindSmsFullSettings; /* ----------------- signal strength setting part ------------------------ */ if( sOldSignalSetting <= CIND_SIGNAL_INDICATOR_LVL0 ) { /* the old (previews) signal setting is off */ if( (sCindSgnalSettings > CIND_SIGNAL_INDICATOR_LVL0) AND (cmhPrm[srcId].mmCmdPrm.CSQworkStat EQ CSQ_Disable) AND (pMMCmerPrm->sCmerIndParam NEQ CMER_INDICATOR_2) ) { /* greather LVL0 --> rx_Init must be initialize... */ #ifndef _SIMULATION_ rx_Init(rx_Cb); #endif /* _SIMULATION_ */ } } else { /* the old (previews) signal setting is on */ if( (sCindSgnalSettings EQ CIND_SIGNAL_INDICATOR_LVL0) AND (cmhPrm[srcId].mmCmdPrm.CSQworkStat EQ CSQ_Disable) AND (pMMCmerPrm->sCmerIndParam NEQ CMER_INDICATOR_2) ) { /* LVL0 --> rx_Init must be reset... */ #ifndef _SIMULATION_ rx_Init(NULL); #endif /* _SIMULATION_ */ } } return(AT_CMPL); } /* +--------------------------------------------------------------------+ | PROJECT : ACI/MMI MODULE : CMH_MMS | | STATE : code ROUTINE : sAT_Plus CMER | +--------------------------------------------------------------------+ PURPOSE : This is the function to setup the buffer control for the indications toward terminal equipment */ GLOBAL T_ACI_RETURN sAT_PlusCMER( T_ACI_CMD_SRC srcId, T_ACI_CMER_MODE_TYPE sCmerModeSettings, T_ACI_CMER_IND_TYPE sCmerIndicationSettings, T_ACI_CMER_BFR_TYPE sCmerBfrSettings ) { T_ACI_MM_CMER_VAL_TYPE *pMMCmerPrm; T_ACI_MM_CIND_VAL_TYPE *pMMCindPrm; T_ACI_CMER_IND_TYPE sOldCmerIndSetting; TRACE_EVENT( "sAT_PlusCMER()" ); if( !cmh_IsVldCmdSrc( srcId ) ) { return( AT_FAIL ); } pMMCmerPrm = &(cmhPrm[srcId].mmCmdPrm.sIndicationParam.sMmCMERSettings); pMMCindPrm = &(cmhPrm[srcId].mmCmdPrm.sIndicationParam.sMmCINDSettings); sOldCmerIndSetting = pMMCmerPrm->sCmerIndParam; if( sCmerModeSettings NEQ CMER_MODE_INVALID ) { pMMCmerPrm->sCmerModeParam = sCmerModeSettings; } if( sCmerIndicationSettings NEQ CMER_INDICATOR_INVALID ) { pMMCmerPrm->sCmerIndParam = sCmerIndicationSettings; } if( sCmerBfrSettings NEQ CMER_BFR_INVALID ) { pMMCmerPrm->sCmerBfrParam = sCmerBfrSettings; } /* ---------------- maybe switch on all indication settings ------------- */ if( sOldCmerIndSetting NEQ CMER_INDICATOR_2 ) { /* the old (previews) indicator setting is 'off' */ if( (sCmerIndicationSettings EQ CMER_INDICATOR_2) AND (cmhPrm[srcId].mmCmdPrm.CSQworkStat EQ CSQ_Disable) AND (pMMCindPrm->sCindSignalParam <= CIND_SIGNAL_INDICATOR_LVL0) ) { /* all indications must be show --> rx_Init must be initialize... */ #ifndef _SIMULATION_ rx_Init(rx_Cb); #endif /* _SIMULATION_ */ } } else { /* the old (previews) signal setting is on */ if( (sCmerIndicationSettings NEQ CMER_INDICATOR_2) AND (cmhPrm[srcId].mmCmdPrm.CSQworkStat EQ CSQ_Disable) AND (pMMCindPrm->sCindSignalParam <= CIND_SIGNAL_INDICATOR_LVL0) ) { /* LVL0 --> rx_Init must be reset... */ #ifndef _SIMULATION_ rx_Init(NULL); #endif /* _SIMULATION_ */ } } return(AT_CMPL); } /* +--------------------------------------------------------------------+ | PROJECT : ACI/MMI MODULE : CMH_MMS | | STATE : code ROUTINE : sAT_PercentCSQ | +--------------------------------------------------------------------+ PURPOSE : This is the callback function for Signal Quality Param: signal_params callback function name Shen,Chao Juni.13th, 2003 */ #ifndef _SIMULATION_ LOCAL void rx_Cb (drv_SignalID_Type *signal_params) { rx_Status_Type *para = NULL; TRACE_EVENT("rx_Cb()"); ACI_MALLOC(para,sizeof(rx_Status_Type)); para->actLevel = ((rx_Status_Type *) signal_params->UserData)->actLevel; para->gsmLevel = ((rx_Status_Type *) signal_params->UserData)->gsmLevel; para->rxQuality = ((rx_Status_Type *) signal_params->UserData)->rxQuality; #ifdef FF_PS_RSSI para->min_access_level = ((rx_Status_Type *) signal_params->UserData)->min_access_level; #endif if (!cmh_set_delayed_call (rx_sequence_Cb, (void *)para)) { /* Implements Measure#32: Row 990 */ TRACE_EVENT("Error, can not set the delayed resequence callback for AT_CMD_CSQ"); ACI_MFREE(para); return ; } TRACE_EVENT("delayed requence call back requested: 100 ms"); cmh_start_delayed_call (20); return; } #endif /* _SIMULATION_ */ /* +--------------------------------------------------------------------+ | PROJECT : ACI/MMI MODULE : CMH_MMS | | STATE : code ROUTINE : sAT_PercentCSQ | +--------------------------------------------------------------------+ PURPOSE : This is the delayed callback function for Signal Quality Shen,Chao Juni.13th, 2003 */ #ifndef _SIMULATION_ LOCAL UCHAR rx_sequence_Cb (void* arg) { int i; UBYTE rssi; UBYTE ber; #ifdef FF_PS_RSSI UBYTE min_access_level; #endif T_ACI_CIND_SIGNAL_TYPE sSignalStrength; T_ACI_MM_CIND_VAL_TYPE sIndValues; struct rx_Status_Type* tmp_p = (struct rx_Status_Type*) arg; TRACE_EVENT("rx_sequence_Cb()"); sIndValues.sCindSmsFullParam = CIND_SMSFULL_INDICATOR_INVALID; if ( tmp_p->gsmLevel EQ 0xFF OR tmp_p->gsmLevel EQ 0 ) { rssi = ACI_RSSI_FAULT; sSignalStrength = CIND_SIGNAL_INDICATOR_LVL0; } else if ( tmp_p->gsmLevel > 59 ) { rssi = 31; } else { rssi = ( tmp_p->gsmLevel / 2 ) + 2; } if ( tmp_p->rxQuality EQ RX_QUAL_UNAVAILABLE ) { ber = ACI_BER_FAULT; } else { ber = tmp_p->rxQuality; } #ifdef FF_PS_RSSI if ( tmp_p->min_access_level EQ RX_ACCE_UNAVAILABLE) { min_access_level = ACI_MIN_RXLEV_FAULT; } else { min_access_level = tmp_p->min_access_level; } #endif for( i = CMD_SRC_LCL; i < CMD_SRC_MAX; i++) { if (cmhPrm[i].mmCmdPrm.CSQworkStat EQ CSQ_Enable) { #ifdef FF_PS_RSSI R_AT (RAT_CSQ, (T_ACI_CMD_SRC)i) (rssi, ber, tmp_p->actLevel, min_access_level); #else R_AT (RAT_CSQ, (T_ACI_CMD_SRC)i) (rssi,ber,tmp_p->actLevel); #endif } /* ==================== process the service of +CIEV ========================== */ sSignalStrength = CIND_SIGNAL_INDICATOR_LVL0; if( tmp_p->gsmLevel >= 11 ) { sSignalStrength = CIND_SIGNAL_INDICATOR_LVL1; }; if( tmp_p->gsmLevel >= 21 ) { sSignalStrength = CIND_SIGNAL_INDICATOR_LVL2; }; if( tmp_p->gsmLevel >= 32 ) { sSignalStrength = CIND_SIGNAL_INDICATOR_LVL3; }; if( tmp_p->gsmLevel >= 42 ) { sSignalStrength = CIND_SIGNAL_INDICATOR_LVL4; }; if( tmp_p->gsmLevel >= 52 ) { sSignalStrength = CIND_SIGNAL_INDICATOR_LVL5; }; sIndValues.sCindSignalParam = sSignalStrength; sIndValues.sCindSmsFullParam = CIND_SMSFULL_INDICATOR_INVALID; if( ((cmhPrm[i].mmCmdPrm.sIndicationParam.sMmCINDSettings.sCindSignalParam > CIND_SIGNAL_INDICATOR_LVL0) AND (cmhPrm[i].mmCmdPrm.sIndicationParam.sMmCINDSettings.sCindSignalParam >= sIndValues.sCindSignalParam) AND (cmhPrm[i].mmCmdPrm.sIndicationParam.sMmCMERSettings.sCmerIndParam EQ CMER_INDICATOR_2)) OR ((cmhPrm[i].mmCmdPrm.sIndicationParam.sMmCINDSettings.sCindSignalParam < sIndValues.sCindSignalParam) AND (cmhPrm[i].mmCmdPrm.sIndicationParam.sMmCMERSettings.sCmerIndParam EQ CMER_INDICATOR_1)) ) { TRACE_EVENT("send +CIEV"); R_AT (RAT_CIEV, (T_ACI_CMD_SRC)i) ( sIndValues, cmhPrm[i].mmCmdPrm.sIndicationParam.sMmCMERSettings ); } } if (!cmh_set_delayed_call (NULL, NULL)) { /* reset this callback pointer -> will be set again via rx_Cb */ /* Implements Measure#32: Row 991 */ TRACE_EVENT("Can not reset the delayed resequence callback for AT_CMD_CSQ"); return FALSE; } ACI_MFREE(tmp_p); return TRUE; } #endif /* _SIMULATION_ */ /* +--------------------------------------------------------------------+ | PROJECT : GSM-PS (6147) MODULE : CMH_MMS | | STATE : code ROUTINE : sAT_PercentCHPL | +--------------------------------------------------------------------+ PURPOSE : This is the functional counterpart to the %CHPL AT command which will return the list of entries in EF_HPLMNwAcT. <mode>: registration mode. <format>: format of operator selection <oper>: operator string */ GLOBAL T_ACI_RETURN sAT_PercentCHPL ( T_ACI_CMD_SRC srcId, T_ACI_OPER_NTRY *oper ) { T_OPER_ENTRY plmnDesc; BOOL found; SHORT mccBuf; SHORT mncBuf; TRACE_FUNCTION ("sAT_PercentCHPL()"); /* *------------------------------------------------------------------- * check whether SIM is ready *------------------------------------------------------------------- */ if (!cmhSIM_CheckSimStatus ()) { return AT_FAIL; } /* *------------------------------------------------------------------- * check command source *------------------------------------------------------------------- */ if(!cmh_IsVldCmdSrc (srcId)) { TRACE_EVENT_P1("sAT_PercentCHPL(): Invalid source: %d", srcId); return( AT_FAIL ); } if(!cmhMM_GetActingHPLMN(&mccBuf, &mncBuf))/* Enhancement Acting HPLMN*/ { cmhSIM_GetHomePLMN (&mccBuf, &mncBuf); } found = cmhMM_FindPLMN (&plmnDesc, mccBuf, mncBuf, NOT_PRESENT_16BIT, FALSE); if (!found) { TRACE_EVENT_P2("sAT_PercentCHPL(): MCC/MN not found in database (0x%X, 0x%X", mccBuf, mncBuf); ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Internal); return( AT_FAIL ); } strcpy (oper->longName, plmnDesc.longName); strcpy (oper->shrtName, plmnDesc.shrtName); oper->mcc = plmnDesc.mcc; oper->mnc = plmnDesc.mnc; oper->pnn = plmnDesc.pnn; oper->long_len = plmnDesc.long_len; oper->shrt_len = plmnDesc.shrt_len; return (AT_CMPL); } /* +--------------------------------------------------------------------+ | PROJECT : GSM-PS (6147) MODULE : CMH_MMS | | STATE : code ROUTINE : sAT_PlusCTZR | +--------------------------------------------------------------------+ PURPOSE : This is the functional counterpart to the +CTZR AT command which will set the status of CTZRmode, indicating whether time zone change rep[orting is enabled or disabled. <on/off>: Indicates whether time zone reporting is enabled or disabled. */ GLOBAL T_ACI_RETURN sAT_PlusCTZR ( T_ACI_CMD_SRC srcId, T_ACI_CTZR_MODE mode) { TRACE_FUNCTION ("sAT_PlusCTZR()"); /* *------------------------------------------------------------------- * check command source *------------------------------------------------------------------- */ if(!cmh_IsVldCmdSrc (srcId)) { TRACE_EVENT_P1("sAT_PlusCTZR(): Invalid source: %d", srcId); return( AT_FAIL ); } /* *------------------------------------------------------------------- * process the mode parameter *------------------------------------------------------------------- */ switch (mode) { case CTZR_MODE_OFF: case CTZR_MODE_ON: cmhPrm[srcId].mmCmdPrm.CTZRMode = mode; break; default: TRACE_EVENT_P1("sAT_PlusCTZR(): Invalid mode: %d", mode); ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter ); return( AT_FAIL ); } return( AT_CMPL ); } /* +--------------------------------------------------------------------+ | PROJECT : GSM-PS (6147) MODULE : CMH_MMS | | STATE : code ROUTINE : sAT_PlusCTZU | +--------------------------------------------------------------------+ PURPOSE : This is the functional counterpart to the +CTZU AT command which will set the status of CTZUmode, indicating whether automatic time zone update is enabled or disabled. <on/off>: Indicates whether automatic time zone update is enabled or disabled. */ GLOBAL T_ACI_RETURN sAT_PlusCTZU ( T_ACI_CMD_SRC srcId, T_ACI_CTZU_MODE mode) { TRACE_FUNCTION ("sAT_PlusCTZU()"); /* *------------------------------------------------------------------- * check command source *------------------------------------------------------------------- */ if(!cmh_IsVldCmdSrc (srcId)) { TRACE_EVENT_P1("sAT_PlusCTZU(): Invalid source: %d", srcId); return( AT_FAIL ); } /* *------------------------------------------------------------------- * process the mode parameter *------------------------------------------------------------------- */ switch (mode) { case CTZU_MODE_OFF: case CTZU_MODE_ON: cmhPrm[srcId].mmCmdPrm.CTZUMode = mode; break; default: TRACE_EVENT_P1("sAT_PlusCTZU(): Invalid mode: %d", mode); ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter ); return( AT_FAIL ); } return( AT_CMPL ); } /* +--------------------------------------------------------------------+ | PROJECT : MODULE : CMH_MMS | | STATE : code ROUTINE : sAT_PlusCCLK | +--------------------------------------------------------------------+ PURPOSE : This is the functional counterpart to the +CCLK AT command which will set the real time clock of the ME */ GLOBAL T_ACI_RETURN sAT_PlusCCLK ( T_ACI_CMD_SRC srcId, T_ACI_RTC_DATE *date_s, T_ACI_RTC_TIME *time_s, int timeZone ) { #ifndef _SIMULATION_ UBYTE ret; #endif /* _SIMULATION_ */ TRACE_FUNCTION ("sAT_PlusCCLK()"); /* *------------------------------------------------------------------- * check command source *------------------------------------------------------------------- */ if(!cmh_IsVldCmdSrc (srcId)) { TRACE_EVENT_P1("sAT_PlusCCLK(): Invalid source: %d", srcId); return( AT_FAIL ); } /* *------------------------------------------------------------------- * Set the time in the RTC *------------------------------------------------------------------- */ #ifndef _SIMULATION_ ret = rtc_set_time_date( (T_RTC_DATE *) date_s, (T_RTC_TIME *) time_s); switch (ret) { case 0: /* RVF_OK. Date and time set ok*/ #ifndef FF_TIMEZONE return( AT_CMPL ); #else /* FF_TIMEZONE */ ret = RTC_SetCurrentTZ((T_RTC_TZ)timeZone); /* Set current timezone now time and date are set.*/ switch (ret) { case 0: /* RVF_OK. RTC current TZ set ok*/ return( AT_CMPL ); default: TRACE_EVENT_P1("sAT_PlusCCLK(): ERROR1: %d", ret); /* RTC setting failed */ return( AT_FAIL ); } #endif /* FF_TIMEZONE */ default: /* RVF_NOT_READY or RVF_INTERNAL ERROR or RVF_INVALID_PARAMETER */ TRACE_EVENT_P1("sAT_PlusCCLK(): ERROR2: %d", ret); /* Date and time setting failed */ return( AT_FAIL ); } #else /* _SIMULATION_ */ return( AT_CMPL ); #endif /* _SIMULATION_ */ } /* +--------------------------------------------------------------------+ | PROJECT : GSM-PS (6147) MODULE : CMH_MMS | | STATE : code ROUTINE : sAT_PercentCTZV | +--------------------------------------------------------------------+ PURPOSE : This is the functional counterpart to the %CTZV AT command which will set the status of PCTZVmode, indicating whether time and date report is enabled or disabled. <on/off>: Indicates whether time and date report is enabled or disabled. */ GLOBAL T_ACI_RETURN sAT_PercentCTZV ( T_ACI_CMD_SRC srcId, T_ACI_PCTZV_MODE mode) { TRACE_FUNCTION ("sAT_PercentCTZV()"); /* *------------------------------------------------------------------- * check command source *------------------------------------------------------------------- */ if(!cmh_IsVldCmdSrc (srcId)) { TRACE_EVENT_P1("sAT_PercentCTZV(): Invalid source: %d", srcId); return( AT_FAIL ); } /* *------------------------------------------------------------------- * process the mode parameter *------------------------------------------------------------------- */ switch (mode) { case PCTZV_MODE_OFF: case PCTZV_MODE_ON: cmhPrm[srcId].mmCmdPrm.PCTZVMode = mode; break; default: TRACE_EVENT_P1("sAT_PercentCTZV(): Invalid mode: %d", mode); ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter ); return( AT_FAIL ); } return( AT_CMPL ); } /* +--------------------------------------------------------------------+ | PROJECT : GSM-PS (6147) MODULE : CMH_MMS | | STATE : code ROUTINE : sAT_PercentCNIV | +--------------------------------------------------------------------+ PURPOSE : This is the functional counterpart to the %CNIV AT command which will set the status of CNIVmode, indicating whether time and date report is enabled or disabled. <on/off>: Indicates whether time and date report is enabled or disabled. */ GLOBAL T_ACI_RETURN sAT_PercentCNIV ( T_ACI_CMD_SRC srcId, T_ACI_CNIV_MODE mode) { TRACE_FUNCTION ("sAT_PercentCNIV()"); /* *------------------------------------------------------------------- * check command source *------------------------------------------------------------------- */ if(!cmh_IsVldCmdSrc (srcId)) { TRACE_EVENT_P1("sAT_PercentCNIV(): Invalid source: %d", srcId); return( AT_FAIL ); } /* *------------------------------------------------------------------- * process the mode parameter *------------------------------------------------------------------- */ switch (mode) { case CNIV_MODE_OFF: case CNIV_MODE_ON: cmhPrm[srcId].mmCmdPrm.CNIVMode = mode; break; default: TRACE_EVENT_P1("sAT_PercentCNIV(): Invalid mode: %d", mode); ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter ); return( AT_FAIL ); } return( AT_CMPL ); } /* +--------------------------------------------------------------------+ | PROJECT : GSM-PS (6147) MODULE : CMH_MMS | | STATE : code ROUTINE : sAT_PercentCWUP | +--------------------------------------------------------------------+ PURPOSE : This is the functional counterpart to the +CWUP AT command which will force RR to trigger a power campaign. */ GLOBAL T_ACI_RETURN sAT_PercentCWUP ( T_ACI_CMD_SRC srcId, T_ACI_CWUP_TYPE type ) { TRACE_FUNCTION ("sAT_PercentCWUP()"); /* *------------------------------------------------------------------- * check command source *------------------------------------------------------------------- */ if(!cmh_IsVldCmdSrc (srcId)) { TRACE_EVENT_P1("sAT_PercentCWUP(): Invalid source: %d", srcId); return( AT_FAIL ); } /* *------------------------------------------------------------------- * check entity status *------------------------------------------------------------------- */ if( mmEntStat.curCmd NEQ AT_CMD_NONE ) { TRACE_EVENT("sAT_PercentCWUP(): MM is busy"); return( AT_BUSY ); } wake_up_rr(); return( AT_CMPL ); } /* +--------------------------------------------------------------------+ | PROJECT : GSM-PS (6147) MODULE : CMH_MMS | | STATE : code ROUTINE : sAT_PlusCOPS | +--------------------------------------------------------------------+ PURPOSE : This function encapsulates the functionality of +COPS and %COPS command <srcId>: Source Id <mode>: registration mode. <format>: format of operator selection <oper>: operator string <cmd>: command */ GLOBAL T_ACI_RETURN sat_Plus_Percent_COPS ( T_ACI_CMD_SRC srcId, T_ACI_COPS_MOD mode, T_ACI_COPS_FRMT format, CHAR * oper, T_ACI_AT_CMD cmd) { T_MM_CMD_PRM * pMMCmdPrm; /* points to MM command parameters */ T_ACI_NRG_RGMD regMode; /*NRG Registration mode */ T_ACI_NRG_FRMT regFormat; T_ACI_NRG_SVMD svrMode; TRACE_FUNCTION ("sat_Plus_Percent_COPS()"); pMMCmdPrm = &cmhPrm[srcId].mmCmdPrm; mmShrdPrm.COPSmodeBeforeAbort = mmShrdPrm.COPSmode; /* * check MM entity status */ if( mmEntStat.curCmd NEQ AT_CMD_NONE ) return( AT_BUSY ); /* *convert format to NRG type and set the COPS format value. */ if( format EQ COPS_FRMT_NotPresent ) format = pMMCmdPrm -> COPSfrmt; switch( format ) { case( COPS_FRMT_NotPresent): regFormat = NRG_FRMT_NotPresent; break; case( COPS_FRMT_Numeric ): regFormat =NRG_FRMT_Numeric ; break; case( COPS_FRMT_Short): regFormat = NRG_FRMT_Short; break; case( COPS_FRMT_Long): regFormat = NRG_FRMT_Long; break; default: ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter ); return( AT_FAIL ); } pMMCmdPrm -> COPSfrmt = format; /* * The function cmhMM_OperatorSelect() is using the NRG types. Therefore the following conversion is required. * Also the appropiate value for Service Mode, required by cmhMM_OperatorSelect(), is set. */ if( mode EQ COPS_MOD_NotPresent ) mode = mmShrdPrm.COPSmode; switch( mode ) { case( COPS_MOD_NotPresent ): regMode = NRG_RGMD_NotPresent; svrMode = NRG_SVMD_NotPresent; break; case( COPS_MOD_Auto ): regMode =NRG_RGMD_Auto ; svrMode = NRG_SVMD_Full; /* Only Full Service makes sense for Automatic Mode */ break; case( COPS_MOD_Man): regMode = NRG_RGMD_Manual; svrMode = NRG_SVMD_Full; /* Only Full Service makes sense for Manual Mode */ break; case( COPS_MOD_Dereg): regMode = NRG_RGMD_Dereg; svrMode = NRG_SVMD_Limited; break; case( COPS_MOD_Both ): regMode = NRG_RGMD_Both; svrMode = NRG_SVMD_Full; /* Only Full Service makes sense for the Both Mode */ break; case(COPS_MOD_SetOnly): /*This mode can be fully handled in this function */ /* DO NOT SET mmShrdPrm.COPSmode !!! */ pMMCmdPrm -> COPSfrmt = format; return AT_CMPL; default: ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter ); return( AT_FAIL ); } mmShrdPrm.COPSmode = mode; /*Set the value of the current command executed */ mmEntStat.curCmd = cmd; return cmhMM_OperatorSelect(srcId,regMode,svrMode,regFormat,oper); } #ifdef TI_PS_FF_AT_P_CMD_CTREG /* +--------------------------------------------------------------------+ | PROJECT : GSM-PS (6147) MODULE : CMH_MMS | | STATE : code ROUTINE : sAT_PercentCTREG | +--------------------------------------------------------------------+ PURPOSE : This is the functional counterpart to the %CTREG AT command which will update the two tables present in common shared location. */ GLOBAL T_ACI_RETURN sAT_PercentCTREG ( T_ACI_CMD_SRC srcId, T_TREG *treg ) { BOOL ret; TRACE_FUNCTION ("sAT_PercentCTREG()"); /* *------------------------------------------------------------------- * check command source *------------------------------------------------------------------- */ if(!cmh_IsVldCmdSrc (srcId)) { TRACE_EVENT_P1("sAT_PercentCTREG(): Invalid source: %d", srcId); ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter ); return( AT_FAIL ); } ret = cl_shrd_set_treg_val(treg); if(ret EQ TRUE) { return( AT_CMPL ); } return(AT_FAIL); } #endif /* TI_PS_FF_AT_P_CMD_CTREG */ /*==== EOF ========================================================*/