view src/g23m-aci/aci/line_split_intern.h @ 600:8f50b202e81f

board preprocessor conditionals: prep for more FC hw in the future This change eliminates the CONFIG_TARGET_FCDEV3B preprocessor symbol and all preprocessor conditionals throughout the code base that tested for it, replacing them with CONFIG_TARGET_FCFAM or CONFIG_TARGET_FCMODEM. These new symbols are specified as follows: CONFIG_TARGET_FCFAM is intended to cover all hardware designs created by Mother Mychaela under the FreeCalypso trademark. This family will include modem products (repackagings of the FCDEV3B, possibly with RFFE or even RF transceiver changes), and also my desired FreeCalypso handset product. CONFIG_TARGET_FCMODEM is intended to cover all FreeCalypso modem products (which will be firmware-compatible with the FCDEV3B if they use TI Rita transceiver, or will require a different fw build if we switch to one of Silabs Aero transceivers), but not the handset product. Right now this CONFIG_TARGET_FCMODEM preprocessor symbol is used to conditionalize everything dealing with MCSI. At the present moment the future of FC hardware evolution is still unknown: it is not known whether we will ever have any beyond-FCDEV3B hardware at all (contingent on uncertain funding), and if we do produce further FC hardware designs, it is not known whether they will retain the same FIC modem core (triband), if we are going to have a quadband design that still retains the classic Rita transceiver, or if we are going to switch to Silabs Aero II or some other transceiver. If we produce a quadband modem that still uses Rita, it will run exactly the same fw as the FCDEV3B thanks to the way we define TSPACT signals for the RF_FAM=12 && CONFIG_TARGET_FCFAM combination, and the current fcdev3b build target will be renamed to fcmodem. OTOH, if that putative quadband modem will be Aero-based, then it will require a different fw build target, the fcdev3b target will stay as it is, and the two targets will both define CONFIG_TARGET_FCFAM and CONFIG_TARGET_FCMODEM, but will have different RF_FAM numbers. But no matter which way we are going to evolve, it is not right to have conditionals on CONFIG_TARGET_FCDEV3B in places like ACI, and the present change clears the way for future evolution.
author Mychaela Falconia <falcon@freecalypso.org>
date Mon, 01 Apr 2019 01:05:24 +0000
parents 53929b40109c
children
line wrap: on
line source

/*
+-----------------------------------------------------------------------------
|  Project :  
|  Modul   :  line edit
+-----------------------------------------------------------------------------
|  Copyright 2002 Texas Instruments Berlin, AG
|                 All rights reserved.
|
|                 This file is confidential and a trade secret of Texas 
|                 Instruments Berlin, AG
|                 The receipt of or possession of this file does not convey
|                 any rights to reproduce or disclose its contents or to
|                 manufacture, use, or sell anything it may describe, in
|                 whole, or in part, without the specific written consent of
|                 Texas Instruments Berlin, AG.
+-----------------------------------------------------------------------------
|  Purpose :  This modul ...
+-----------------------------------------------------------------------------
*/

#ifndef LINE_SPLIT_INTERN_H
#define LINE_SPLIT_INTERN_H

#define LEDIT_MAX_CMD_NAME_LEN (17)
#define LEDIT_MAX_S_NAME_LEN   (2)

#define SEARCH_BAT_LEN  (0)
#define SEARCH_DIAL_LEN (1)
#define SEARCH_EXT_LEN  (2)

#define BATCMD_NO_SUPP  (0)
#define BATCMD_SUPPORT  (1)
#define BATCMD_DIAL     (2) /* D <---- SPECIAL */
#define BATCMD_S_PARAM  (3) /* S <---- SPECIAL */

#define ANDCMD_NO_SUPP  (0)
#define ANDCMD_SUPPORT  (1)


typedef enum
{
  LEDIT_CHAR_TERMINATED = 0x00,
  LEDIT_CHAR_PERCENT    = 0x25, /* '%' */
  LEDIT_CHAR_AND        = 0x26, /* '&' */
  LEDIT_CHAR_PLUS       = 0x2B, /* '+' */
  LEDIT_CHAR_COMMA      = 0x2C, /* ',' */
  LEDIT_CHAR_NUMBER     = 0x30, /* '0' symbolic for 0..9 */
  LEDIT_CHAR_SEPARATOR  = 0x3B, /* ';' */
  LEDIT_CHAR_SET        = 0x3D, /* '=' */
  LEDIT_CHAR_READ       = 0x3F, /* '?' */
  LEDIT_CHAR_CHAR       = 0x41, /* 'A' symbolic for A..Z*/
  LEDIT_CHAR_EXT         = 0x5B, /*'[' symbolic for the rest of characters*/
  LEDIT_CHAR_INVALID    = 0xFF
} T_LEDIT_CHAR_TYPE;

typedef enum
{
  LEDIT_BASIC_NAME, /* consists of one char only */
  LEDIT_S_NAME,     /* first char must be 'S' and then only digits */
  LEDIT_EXT_NAME    /* multi char name           */
} T_LEDIT_NAME_TYPE;

typedef enum
{
  LEDIT_BASIC_PARAM, /* consists of digits  only */
  LEDIT_DIAL_PARAM,  /* the ending ';' is important to inform about voice or data call */
  LEDIT_EXT_PARAM    /* digits ,, "strings" ;    */
} T_LEDIT_PARAM_TYPE;

EXTERN T_LEDIT_RSLT ledit_split      (T_LEDIT_INTERN *leditInt);
EXTERN void         ledit_free_cmd   (T_LEDIT_INTERN *leditInt);

#endif