FreeCalypso > hg > fc-magnetite
view src/g23m-aci/aci/psa_psip.c @ 600:8f50b202e81f
board preprocessor conditionals: prep for more FC hw in the future
This change eliminates the CONFIG_TARGET_FCDEV3B preprocessor symbol and
all preprocessor conditionals throughout the code base that tested for it,
replacing them with CONFIG_TARGET_FCFAM or CONFIG_TARGET_FCMODEM. These
new symbols are specified as follows:
CONFIG_TARGET_FCFAM is intended to cover all hardware designs created by
Mother Mychaela under the FreeCalypso trademark. This family will include
modem products (repackagings of the FCDEV3B, possibly with RFFE or even
RF transceiver changes), and also my desired FreeCalypso handset product.
CONFIG_TARGET_FCMODEM is intended to cover all FreeCalypso modem products
(which will be firmware-compatible with the FCDEV3B if they use TI Rita
transceiver, or will require a different fw build if we switch to one of
Silabs Aero transceivers), but not the handset product. Right now this
CONFIG_TARGET_FCMODEM preprocessor symbol is used to conditionalize
everything dealing with MCSI.
At the present moment the future of FC hardware evolution is still unknown:
it is not known whether we will ever have any beyond-FCDEV3B hardware at all
(contingent on uncertain funding), and if we do produce further FC hardware
designs, it is not known whether they will retain the same FIC modem core
(triband), if we are going to have a quadband design that still retains the
classic Rita transceiver, or if we are going to switch to Silabs Aero II
or some other transceiver. If we produce a quadband modem that still uses
Rita, it will run exactly the same fw as the FCDEV3B thanks to the way we
define TSPACT signals for the RF_FAM=12 && CONFIG_TARGET_FCFAM combination,
and the current fcdev3b build target will be renamed to fcmodem. OTOH, if
that putative quadband modem will be Aero-based, then it will require a
different fw build target, the fcdev3b target will stay as it is, and the
two targets will both define CONFIG_TARGET_FCFAM and CONFIG_TARGET_FCMODEM,
but will have different RF_FAM numbers. But no matter which way we are
going to evolve, it is not right to have conditionals on CONFIG_TARGET_FCDEV3B
in places like ACI, and the present change clears the way for future
evolution.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Mon, 01 Apr 2019 01:05:24 +0000 |
parents | 53929b40109c |
children |
line wrap: on
line source
/* +----------------------------------------------------------------------------- | Project : GSM-PS (6147) | Modul : PSA_PSIP +----------------------------------------------------------------------------- | Copyright 2002 Texas Instruments Berlin, AG | All rights reserved. | | This file is confidential and a trade secret of Texas | Instruments Berlin, AG | The receipt of or possession of this file does not convey | any rights to reproduce or disclose its contents or to | manufacture, use, or sell anything it may describe, in | whole, or in part, without the specific written consent of | Texas Instruments Berlin, AG. +----------------------------------------------------------------------------- | Purpose : This module defines the processing functions for the | primitives sent to the protocol stack adapter by the DTI | interface. +----------------------------------------------------------------------------- */ #if defined (FF_PSI) && defined (DTI) #define PSA_PSIP_C #include "aci_all.h" /*==== INCLUDES ===================================================*/ #include "aci_cmh.h" #include "ati_cmd.h" #include "dti.h" /* functionality of the dti library */ #include "aci.h" #include "aci_lst.h" #include "dti_conn_mng.h" #include "dti_cntrl_mng.h" #include "psa_psi.h" #include "cmh_psi.h" #include "ati_src_psi.h" #include "ati_io.h" #include "aci_mem.h" #include "sap_dti.h" /*==== CONSTANTS ==================================================*/ /*==== TYPES ======================================================*/ GLOBAL T_ACI_LIST *psi_dev_list=NULL; /*==== EXPORT =====================================================*/ /*==== VARIABLES ==================================================*/ /*==== FUNCTIONS ==================================================*/ /* for tracing of establishing of CMD channels for dual port version */ /* +----------------------------------------------------------------------+ | PROJECT : GPRS (8441) MODULE : PSA_PSIP | | STATE : finished ROUTINE : find_psi_dev_no | +----------------------------------------------------------------------+ PURPOSE : search psi device number in psi device list */ LOCAL BOOL find_psi_dev_id ( U32 devId, void * elem ) { T_ACI_PSI *compared = (T_ACI_PSI *)elem; if (compared NEQ NULL) { if (compared->devId EQ devId ) { return TRUE; } else { return FALSE; } } else { return FALSE; } } #ifdef _SIMULATION_ /* +----------------------------------------------------------------------+ | PROJECT : GPRS (8441) MODULE : PSA_PSIP | | STATE : finished ROUTINE : mng_psi_dev_list_test | +----------------------------------------------------------------------+ PURPOSE : manage psi device list */ LOCAL BOOL mng_psi_dev_list_test ( T_PSI_CONN_IND_TEST *psi_conn_ind_test ) { T_ACI_PSI *msg_ptr = NULL; if(psi_dev_list EQ NULL) {/* there is no psi device list */ psi_dev_list = new_list(); } msg_ptr = psi_find_element(psi_dev_list, psi_conn_ind_test->devId, find_psi_dev_id); if(msg_ptr EQ NULL) {/* added new device */ { ACI_MALLOC(msg_ptr,sizeof(T_ACI_PSI)); msg_ptr->devId = psi_conn_ind_test->devId; msg_ptr->psi_data_mode = psi_conn_ind_test->psi_data_mode; switch (psi_conn_ind_test->devId & DIO_TYPE_DAT_MASK) { case DIO_DATA_SER: memcpy(&msg_ptr->psi_cap.dio_cap_ser,&psi_conn_ind_test->DIO_CAP_UN.DIO_CAP_SER, sizeof(msg_ptr->psi_cap.dio_cap_ser)); break; case DIO_DATA_MUX: memcpy(&msg_ptr->psi_cap.dio_cap_ser_mux, &psi_conn_ind_test->DIO_CAP_UN.DIO_CAP_SER_MUX, sizeof(msg_ptr->psi_cap.dio_cap_ser_mux)); break; case DIO_DATA_PKT: memcpy(&msg_ptr->psi_cap.dio_cap_pkt, &psi_conn_ind_test->DIO_CAP_UN.DIO_CAP_PKT, sizeof(msg_ptr->psi_cap.dio_cap_pkt)); break; } insert_list(psi_dev_list,msg_ptr); return (TRUE); } } else {/* new DIO capabilities for existing device */ return (FALSE); } } #endif /* _SIMULATION_ */ /* +----------------------------------------------------------------------+ | PROJECT : GPRS (8441) MODULE : PSA_PSIP | | STATE : finished ROUTINE : mng_psi_dev_list | +----------------------------------------------------------------------+ PURPOSE : manage psi device list */ LOCAL BOOL mng_psi_dev_list ( T_PSI_CONN_IND *psi_conn_ind ) { T_ACI_PSI *msg_ptr = NULL; if(psi_dev_list EQ NULL) {/* there is no psi device list */ psi_dev_list = new_list(); } msg_ptr = psi_find_element(psi_dev_list, psi_conn_ind->devId, find_psi_dev_id); if(msg_ptr EQ NULL) { /* added new device */ /* if((psi_conn_ind->dio_cap->data_mode >= DTI_CPBLTY_CMD ) AND (psi_conn_ind->dio_cap->data_mode <=(DTI_CPBLTY_CMD|DTI_CPBLTY_PKT|DTI_CPBLTY_SER)))*/ { ACI_MALLOC(msg_ptr,sizeof(T_ACI_PSI)); msg_ptr->devId = psi_conn_ind->devId; msg_ptr->psi_data_mode = psi_conn_ind->psi_data_mode; switch (psi_conn_ind->devId & DIO_TYPE_DAT_MASK) { case DIO_DATA_SER: if(psi_conn_ind->ptr_DIO_CAP NEQ NULL) { memcpy(&msg_ptr->psi_cap.dio_cap_ser,(T_DIO_CAP_SER *)&(psi_conn_ind->ptr_DIO_CAP), sizeof(msg_ptr->psi_cap.dio_cap_ser)); } break; case DIO_DATA_MUX: if(psi_conn_ind->ptr_DIO_CAP NEQ NULL) { memcpy(&msg_ptr->psi_cap.dio_cap_ser_mux, (T_DIO_CAP_SER_MUX *)&(psi_conn_ind->ptr_DIO_CAP), sizeof(msg_ptr->psi_cap.dio_cap_ser_mux)); } break; case DIO_DATA_PKT: if(psi_conn_ind->ptr_DIO_CAP NEQ NULL) { memcpy(&msg_ptr->psi_cap.dio_cap_pkt, (T_DIO_CAP_PKT *)&(psi_conn_ind->ptr_DIO_CAP), sizeof(msg_ptr->psi_cap.dio_cap_pkt)); } break; } insert_list(psi_dev_list,msg_ptr); return (TRUE); } /* else { neither CMD, SER nor PKT mode return (FALSE); }*/ } else {/* new DIO capabilities for existing device */ return (FALSE); } } /* +--------------------------------------------------------------------+ | PROJECT : GPRS (8441) MODULE : PSA_PSIP | | STATE : code ROUTINE : PSI_erase_dev_elem | +--------------------------------------------------------------------+ PURPOSE : erase an entry element from the psi_dev_list list. */ LOCAL void PSI_erase_dev_elem(U32 devId) { T_ACI_DTI_PRC_PSI *content; content = psi_remove_element (psi_dev_list, devId, find_psi_dev_id); ACI_MFREE (content); } #ifdef _SIMULATION_ /* +----------------------------------------------------------------------+ | PROJECT : GPRS (8441) MODULE : PSA_PSI | | STATE : finished ROUTINE : psa_psi_conn_ind_test | +----------------------------------------------------------------------+ PURPOSE : processes the PSI_CONN_IND_TEST primitive send by PSI. add new device to psi device list, create the ATI source and register the DIO capabilities in ACI */ GLOBAL const void psa_psi_conn_ind_test ( T_PSI_CONN_IND_TEST *psi_conn_ind_test ) { T_ACI_PSI * msg_ptr; UBYTE src_id = 0; U32 dio_cap; TRACE_FUNCTION ("psa_psi_conn_ind_test()"); dio_cap =psi_conn_ind_test->devId & DIO_TYPE_DAT_MASK; if(mng_psi_dev_list_test(psi_conn_ind_test) EQ TRUE ) { msg_ptr = psi_find_element(psi_dev_list, psi_conn_ind_test->devId, find_psi_dev_id); switch (dio_cap) { case DIO_DATA_SER: /*lint -fallthrough*/ case DIO_DATA_MUX: /*lint -fallthrough*/ case DIO_DATA_PKT: /* Create a new AT source if driver supports AT commands */ if(psi_conn_ind_test->psi_data_mode EQ DRIVER_MODE_AT OR psi_conn_ind_test->psi_data_mode EQ DRIVER_MODE_AT_DATA) { src_id = psi_new_source(psi_conn_ind_test->devId, NOT_PRESENT_8BIT, dio_cap); } cmhPSI_Ind(msg_ptr, src_id,dio_cap); break; default: break; } } else {/* second PSI_CONNECT_IND from same device or wrong convergence (mode) in DIO capabilities */ psaPSI_ConnRej(psi_conn_ind_test->devId); } /* free the primitive buffer */ PFREE (psi_conn_ind_test); } #endif /* _SIMULATION_ */ /* +----------------------------------------------------------------------+ | PROJECT : GPRS (8441) MODULE : PSA_PSI | | STATE : finished ROUTINE : psa_psi_conn_ind | +----------------------------------------------------------------------+ PURPOSE : processes the PSI_CONN_IND primitive send by PSI. add new device to psi device list, create the ATI source and register the DIO capabilities in ACI */ GLOBAL void psa_psi_conn_ind ( T_PSI_CONN_IND *psi_conn_ind ) { T_ACI_PSI * msg_ptr; UBYTE src_id = 0; U32 dio_cap; TRACE_FUNCTION ("psa_psi_conn_ind()"); /* cmhPSI_SetDcbParToUnchanged( device_entry );*/ dio_cap =psi_conn_ind->devId & DIO_TYPE_DAT_MASK; if(mng_psi_dev_list(psi_conn_ind) EQ TRUE ) { msg_ptr = psi_find_element(psi_dev_list, psi_conn_ind->devId, find_psi_dev_id); switch (dio_cap) { case DIO_DATA_SER: /*lint -fallthrough*/ case DIO_DATA_MUX: /*lint -fallthrough*/ case DIO_DATA_PKT: /* Create a new AT source if driver supports AT commands */ if(psi_conn_ind->psi_data_mode EQ DRIVER_MODE_AT OR psi_conn_ind->psi_data_mode EQ DRIVER_MODE_AT_DATA) { src_id = psi_new_source(psi_conn_ind->devId, NOT_PRESENT_8BIT, dio_cap); } cmhPSI_Ind(msg_ptr, src_id,dio_cap); break; default: break; } } else {/* second PSI_CONNECT_IND from same device or wrong convergence (mode) in DIO capabilities */ psaPSI_ConnRej(psi_conn_ind->devId); } /* free the primitive buffer */ PFREE (psi_conn_ind); } /* +----------------------------------------------------------------------+ | PROJECT : GPRS (8441) MODULE : PSA_PSI | | STATE : finished ROUTINE : psa_psi_dti_close_ind | +----------------------------------------------------------------------+ PURPOSE : processes the PSI_DTI_CLOSE_IND primitive send by PSI. this indicates the dti disconnection caused by the DIO driver */ GLOBAL void psa_psi_dti_close_ind( T_PSI_DTI_CLOSE_IND *psi_dti_close_ind ) { T_ACI_PSI * msg_ptr; TRACE_FUNCTION ("psa_psi_dti_close_ind()"); msg_ptr = psi_find_element(psi_dev_list, psi_dti_close_ind->devId, find_psi_dev_id); /* if the device_no does not exist in the psi_dev_list the primitive is ignored */ if(msg_ptr NEQ NULL) { cmhPSI_DTI_Close(psi_dti_close_ind->devId, PSI_DTI_CLS_IND, psi_dti_close_ind->link_id); } else { TRACE_EVENT ("ERROR: DEVICE NOT FOUND."); } /* free the primitive buffer */ PFREE (psi_dti_close_ind); } /* +----------------------------------------------------------------------+ | PROJECT : GPRS (8441) MODULE : PSA_PSI | | STATE : finished ROUTINE : psa_psi_disconn_ind | +----------------------------------------------------------------------+ PURPOSE : processes the PSI_DISCONN_IND primitive send by PSI. this indicates the disconnection of data call caused by the DIO driver */ GLOBAL void psa_psi_disconn_ind ( T_PSI_DISCONN_IND *psi_disconn_ind ) { T_ACI_PSI * msg_ptr; T_ACI_DTI_PRC_PSI *cmd; TRACE_FUNCTION ("psa_psi_disconn_ind()"); msg_ptr = psi_find_element(psi_dev_list, psi_disconn_ind->devId, find_psi_dev_id); cmd = cmhPSI_find_dlci (psi_src_params, psi_disconn_ind->devId, UART_DLCI_NOT_MULTIPLEXED); /* if the device_no does not exist in the psi_dev_list the primitive is ignored */ if(msg_ptr NEQ NULL) { /*erase the source*/ psi_erase_source( cmd->srcId ); /*erase the src element in the <psi_src_params>*/ cmhPSI_erase_src_elem (cmd->srcId ); /*erase the devie from the device list*/ PSI_erase_dev_elem (psi_disconn_ind->devId); } /* free the primitive buffer */ PFREE (psi_disconn_ind); } /* +----------------------------------------------------------------------+ | PROJECT : GPRS (8441) MODULE : PSA_PSI | | STATE : finished ROUTINE : psa_psi_dti_close_cnf | +----------------------------------------------------------------------+ PURPOSE : processes the PSI_DTI_CLOSE_CNF primitive sent by PSI. this confirms the dti disconnection requested by PSI_DTI_CLOSE_REQ */ GLOBAL void psa_psi_dti_close_cnf ( T_PSI_DTI_CLOSE_CNF *psi_dti_close_cnf ) { T_ACI_PSI * msg_ptr; TRACE_FUNCTION ("psa_psi_dti_close_cnf()"); msg_ptr = psi_find_element(psi_dev_list, psi_dti_close_cnf->devId, find_psi_dev_id); /* if the devId does not exist in the psi_dev_list the primitive is ignored */ if(msg_ptr NEQ NULL) { cmhPSI_DTI_Close(psi_dti_close_cnf->devId, PSI_DTI_CLS_CNF, psi_dti_close_cnf->link_id); } /* psaPSI_CloseReq(psi_dti_close_cnf->devId);*/ /* free the primitive buffer */ PFREE (psi_dti_close_cnf); } /* +----------------------------------------------------------------------+ | PROJECT : GPRS (8441) MODULE : PSA_PSI | | STATE : finished ROUTINE : psa_psi_close_cnf | +----------------------------------------------------------------------+ PURPOSE : processes the PSI_CLOSE_CNF primitive sent by PSI. this confirms the dti disconnection requested by PSI_CLOSE_REQ */ GLOBAL void psa_psi_close_cnf ( T_PSI_CLOSE_CNF *psi_close_cnf ) { T_ACI_PSI * msg_ptr; T_ACI_DTI_PRC_PSI *cmd; TRACE_FUNCTION ("psa_psi_close_cnf()"); msg_ptr = psi_find_element(psi_dev_list, psi_close_cnf->devId, find_psi_dev_id); cmd = cmhPSI_find_dlci (psi_src_params, psi_close_cnf->devId, UART_DLCI_NOT_MULTIPLEXED); /* if the devId does not exist in the psi_dev_list the primitive is ignored */ if(msg_ptr NEQ NULL) { /*erase the source*/ psi_erase_source( cmd->srcId ); /*erase the src element in the <psi_src_params>*/ cmhPSI_erase_src_elem (cmd->srcId ); /*erase the devie from the device list*/ PSI_erase_dev_elem (psi_close_cnf->devId); } /* free the primitive buffer */ PFREE (psi_close_cnf); } /* +----------------------------------------------------------------------+ | PROJECT : GPRS (8441) MODULE : PSA_PSI | | STATE : finished ROUTINE : psa_psi_dti_open_cnf | +----------------------------------------------------------------------+ PURPOSE : processes the PSI_DTI_OPEN_CNF primitive send by PSI. this confirms the dti connection requested by PSI_DTI_OPEN_REQ */ GLOBAL void psa_psi_dti_open_cnf ( T_PSI_DTI_OPEN_CNF *psi_dti_open_cnf ) { T_ACI_PSI * msg_ptr; TRACE_FUNCTION ("psa_psi_dti_open_cnf()"); msg_ptr = psi_find_element(psi_dev_list, psi_dti_open_cnf->devId, find_psi_dev_id); /* if the devId does not exist in the psi_dev_list the primitive is ignored */ if(msg_ptr NEQ NULL) { switch(psi_dti_open_cnf->cause) { case PSICS_SUCCESS: cmhPSI_DTI_OpenCnf(psi_dti_open_cnf->devId, psi_dti_open_cnf->link_id, DTI_OK); break; case PSICS_INVALID_PARAMS: case PSICS_DISCONNECT: case PSICS_INTERNAL_DRV_ERROR: default: cmhPSI_DTI_OpenCnf(psi_dti_open_cnf->devId, psi_dti_open_cnf->link_id, DTI_ERROR); break; } } /* free the primitive buffer */ PFREE (psi_dti_open_cnf); } /* +----------------------------------------------------------------------+ | PROJECT : GPRS (8441) MODULE : PSA_PSI | | STATE : finished ROUTINE : psa_psi_setconf_cnf | +----------------------------------------------------------------------+ PURPOSE : processes the PSI_DTI_SETCONF_CNF primitive send by PSI. this confirms the changed driver configuration requested by PSI_SETCONF_REQ */ GLOBAL void psa_psi_setconf_cnf (T_PSI_SETCONF_CNF *psi_setconf_cnf) { TRACE_FUNCTION ("psa_psi_setconf_cnf()"); /* free the primitive buffer */ PFREE (psi_setconf_cnf); } /* +---------------------------------------------------------------------+ | PROJECT : GSM-PS (6147) MODULE :PSA_PSIP | | ROUTINE : psa_psi_line_state_cnf | +---------------------------------------------------------------------+ PURPOSE : */ GLOBAL void psa_psi_line_state_cnf(T_PSI_LINE_STATE_CNF *psi_line_state_cnf) { T_ACI_DTI_PRC_PSI *src_infos = NULL; TRACE_FUNCTION("psa_psi_line_state_cnf ()"); src_infos = cmhPSI_find_dlci (psi_src_params, psi_line_state_cnf->devId, UART_DLCI_NOT_MULTIPLEXED); if (src_infos EQ NULL) { TRACE_EVENT_P1 ("[ERR] psa_psi_line_state_cnf: not found: device=%d;",psi_line_state_cnf->devId); } else { BITFIELD_CLEAR (src_infos->data_cntr, PSI_RING_RUNNING); } PFREE(psi_line_state_cnf); } /* +---------------------------------------------------------------------+ | PROJECT : GSM-PS (6147) MODULE : PSA_PSIP | | ROUTINE : psa_psi_line_state_ind | +---------------------------------------------------------------------+ PURPOSE : */ GLOBAL void psa_psi_line_state_ind(T_PSI_LINE_STATE_IND *psi_line_state_ind ) { TRACE_FUNCTION("psa_psi_line_state_ind()"); cmhPSI_Line_State_Ind ( psi_line_state_ind->devId, psi_line_state_ind->line_state ); PFREE(psi_line_state_ind); } #endif /*FF_PSI*/ /*==== EOF =======================================================*/