FreeCalypso > hg > fc-magnetite
view src/g23m-aci/aci/wap_aci.h @ 600:8f50b202e81f
board preprocessor conditionals: prep for more FC hw in the future
This change eliminates the CONFIG_TARGET_FCDEV3B preprocessor symbol and
all preprocessor conditionals throughout the code base that tested for it,
replacing them with CONFIG_TARGET_FCFAM or CONFIG_TARGET_FCMODEM. These
new symbols are specified as follows:
CONFIG_TARGET_FCFAM is intended to cover all hardware designs created by
Mother Mychaela under the FreeCalypso trademark. This family will include
modem products (repackagings of the FCDEV3B, possibly with RFFE or even
RF transceiver changes), and also my desired FreeCalypso handset product.
CONFIG_TARGET_FCMODEM is intended to cover all FreeCalypso modem products
(which will be firmware-compatible with the FCDEV3B if they use TI Rita
transceiver, or will require a different fw build if we switch to one of
Silabs Aero transceivers), but not the handset product. Right now this
CONFIG_TARGET_FCMODEM preprocessor symbol is used to conditionalize
everything dealing with MCSI.
At the present moment the future of FC hardware evolution is still unknown:
it is not known whether we will ever have any beyond-FCDEV3B hardware at all
(contingent on uncertain funding), and if we do produce further FC hardware
designs, it is not known whether they will retain the same FIC modem core
(triband), if we are going to have a quadband design that still retains the
classic Rita transceiver, or if we are going to switch to Silabs Aero II
or some other transceiver. If we produce a quadband modem that still uses
Rita, it will run exactly the same fw as the FCDEV3B thanks to the way we
define TSPACT signals for the RF_FAM=12 && CONFIG_TARGET_FCFAM combination,
and the current fcdev3b build target will be renamed to fcmodem. OTOH, if
that putative quadband modem will be Aero-based, then it will require a
different fw build target, the fcdev3b target will stay as it is, and the
two targets will both define CONFIG_TARGET_FCFAM and CONFIG_TARGET_FCMODEM,
but will have different RF_FAM numbers. But no matter which way we are
going to evolve, it is not right to have conditionals on CONFIG_TARGET_FCDEV3B
in places like ACI, and the present change clears the way for future
evolution.
| author | Mychaela Falconia <falcon@freecalypso.org> |
|---|---|
| date | Mon, 01 Apr 2019 01:05:24 +0000 |
| parents | 53929b40109c |
| children |
line wrap: on
line source
/* +----------------------------------------------------------------------------- | Project : GSM-F&D (8411) | Modul : WAP +----------------------------------------------------------------------------- | Copyright 2002 Texas Instruments Berlin, AG | All rights reserved. | | This file is confidential and a trade secret of Texas | Instruments Berlin, AG | The receipt of or possession of this file does not convey | any rights to reproduce or disclose its contents or to | manufacture, use, or sell anything it may describe, in | whole, or in part, without the specific written consent of | Texas Instruments Berlin, AG. +----------------------------------------------------------------------------- | Purpose : Definitions for the WAP module +----------------------------------------------------------------------------- */ #ifndef WAP_ACI_H #define WAP_ACI_H /*==== TYPES ======================================================*/ typedef enum { Wap_Not_Init = -1 , #ifdef FF_GPF_TCPIP TCPIP_Initialization, TCPIP_Initialized, TCPIP_Activation , TCPIP_Activated , #endif /*FF_GPF_TCPIP*/ UDPA_Activation , UDPA_Activated , IPA_Activation , IPA_Activated , IPA_Configuration , IPA_Configurated , UDPA_Configuration , UDPA_Configurated , #ifdef FF_GPF_TCPIP TCPIP_Configuration , TCPIP_Configurated , #endif /*FF_GPF_TCPIP*/ IPA_Deconfiguration, IPA_Deconfigurated, UDPA_Deconfiguration, UPDA_Deconfigurated, #ifdef FF_GPF_TCPIP TCPIP_Deconfiguration, TCPIP_Deconfigurated, TCPIP_Deactivation, TCPIP_Deactivated, #endif /*FF_GPF_TCPIP*/ UDPA_Deactivation, UDPA_Deactivated, IPA_Deactivation, IPA_Deactivated } T_ACI_WAP_STATES; /* * Indicate is IP connected or disconnected */ typedef enum { IPA_CONN, IPA_DSC } T_ACI_IPA_DIRC; /*==== EXPORT =====================================================*/ /* * Prototypes for IP and UDP. */ EXTERN void psaIPA_Config ( ULONG ip, USHORT max_trans_unit, T_ACI_IPA_DIRC dirc ); EXTERN void psaUDPA_Config ( UBYTE dirc ); EXTERN T_ACI_RETURN cmhIPA_Configurated ( void ); EXTERN T_ACI_RETURN cmhIPA_Deconfigurated ( void ); EXTERN T_ACI_RETURN cmhUDPA_Activate ( T_ACI_CMD_SRC srcId, SHORT cId ); EXTERN T_ACI_RETURN cmhUDPA_Configurated ( void ); EXTERN T_ACI_RETURN cmhUDPA_Deconfigurated ( void ); EXTERN T_ACI_RETURN cmhUDPA_Deactivate ( UBYTE src_id ); EXTERN T_ACI_RETURN cmhTCPIP_Activate ( T_ACI_CMD_SRC srcId, SHORT cId ); EXTERN T_ACI_RETURN cmhTCPIP_Configurated ( void ); EXTERN T_ACI_RETURN cmhTCPIP_Deconfigurated ( void ); EXTERN T_ACI_RETURN cmhTCPIP_Deactivate ( UBYTE src_id ); EXTERN void psaIPA_Dti_Req(ULONG dti_id, UBYTE peer_to_connect_to, UBYTE dti_conn); EXTERN void psaUDPA_Dti_Req(ULONG dti_id, UBYTE peer_to_connect_to, UBYTE dti_conn); EXTERN void psaWAP_Dti_Req(ULONG dti_id, UBYTE peer_to_connect_to, UBYTE dti_conn); /* * Variables for WAP, state, id and CALL */ #ifdef PSA_PPPP_C GLOBAL T_ACI_WAP_STATES wap_state = Wap_Not_Init; GLOBAL SHORT wapId = NO_ENTRY; GLOBAL BOOL Wap_Call = FALSE; GLOBAL UBYTE wap_dti_id = DTI_DTI_ID_NOTPRESENT; GLOBAL ULONG peer_link_id = DTI_LINK_ID_NOTPRESENT; GLOBAL ULONG prot_link_id = DTI_LINK_ID_NOTPRESENT; GLOBAL UBYTE peer_entity_id = DTI_ENTITY_MAX; GLOBAL UBYTE prot_entity_id = DTI_ENTITY_MAX; #else EXTERN T_ACI_WAP_STATES wap_state; EXTERN SHORT wapId; EXTERN BOOL Wap_Call; EXTERN UBYTE wap_dti_id; EXTERN ULONG peer_link_id; EXTERN ULONG prot_link_id; EXTERN UBYTE peer_entity_id; EXTERN UBYTE prot_entity_id; #endif /* of #ifdef CMH_UDPAS_C */ #endif /* of #ifndef WAP_ACI_H */