view src/g23m-fad/ppp/ppp_lcps.c @ 600:8f50b202e81f

board preprocessor conditionals: prep for more FC hw in the future This change eliminates the CONFIG_TARGET_FCDEV3B preprocessor symbol and all preprocessor conditionals throughout the code base that tested for it, replacing them with CONFIG_TARGET_FCFAM or CONFIG_TARGET_FCMODEM. These new symbols are specified as follows: CONFIG_TARGET_FCFAM is intended to cover all hardware designs created by Mother Mychaela under the FreeCalypso trademark. This family will include modem products (repackagings of the FCDEV3B, possibly with RFFE or even RF transceiver changes), and also my desired FreeCalypso handset product. CONFIG_TARGET_FCMODEM is intended to cover all FreeCalypso modem products (which will be firmware-compatible with the FCDEV3B if they use TI Rita transceiver, or will require a different fw build if we switch to one of Silabs Aero transceivers), but not the handset product. Right now this CONFIG_TARGET_FCMODEM preprocessor symbol is used to conditionalize everything dealing with MCSI. At the present moment the future of FC hardware evolution is still unknown: it is not known whether we will ever have any beyond-FCDEV3B hardware at all (contingent on uncertain funding), and if we do produce further FC hardware designs, it is not known whether they will retain the same FIC modem core (triband), if we are going to have a quadband design that still retains the classic Rita transceiver, or if we are going to switch to Silabs Aero II or some other transceiver. If we produce a quadband modem that still uses Rita, it will run exactly the same fw as the FCDEV3B thanks to the way we define TSPACT signals for the RF_FAM=12 && CONFIG_TARGET_FCFAM combination, and the current fcdev3b build target will be renamed to fcmodem. OTOH, if that putative quadband modem will be Aero-based, then it will require a different fw build target, the fcdev3b target will stay as it is, and the two targets will both define CONFIG_TARGET_FCFAM and CONFIG_TARGET_FCMODEM, but will have different RF_FAM numbers. But no matter which way we are going to evolve, it is not right to have conditionals on CONFIG_TARGET_FCDEV3B in places like ACI, and the present change clears the way for future evolution.
author Mychaela Falconia <falcon@freecalypso.org>
date Mon, 01 Apr 2019 01:05:24 +0000
parents 90eb61ecd093
children
line wrap: on
line source

/* 
+----------------------------------------------------------------------------- 
|  Project :  
|  Modul   :  
+----------------------------------------------------------------------------- 
|  Copyright 2002 Texas Instruments Berlin, AG 
|                 All rights reserved. 
| 
|                 This file is confidential and a trade secret of Texas 
|                 Instruments Berlin, AG 
|                 The receipt of or possession of this file does not convey 
|                 any rights to reproduce or disclose its contents or to 
|                 manufacture, use, or sell anything it may describe, in 
|                 whole, or in part, without the specific written consent of 
|                 Texas Instruments Berlin, AG. 
+----------------------------------------------------------------------------- 
|  Purpose :  This modul is part of the entity PPP and implements all 
|             functions to handles the incoming process internal signals as  
|             described in the SDL-documentation (LCP-statemachine)
+----------------------------------------------------------------------------- 
*/ 

#ifndef PPP_LCPS_C
#define PPP_LCPS_C
#endif /* PPP_LCPS_C */

#define ENTITY_PPP

/*==== INCLUDES =============================================================*/

#include "typedefs.h"   /* to get Condat data types */
#include "vsi.h"        /* to get a lot of macros */
#include "macdef.h"     /* to get a lot of macros */
#include "custom.h"     /* to get a lot of macros */
#include "gsm.h"        /* to get a lot of macros */
#include "cnf_ppp.h"    /* to get cnf-definitions */
#include "mon_ppp.h"    /* to get mon-definitions */
#include "prim.h"       /* to get the definitions of used SAP and directions */
#include "dti.h"        /* to get the DTILIB definitions */
#include "ppp.h"        /* to get the global entity definitions */

#include "ppp_lcpf.h"   /* to get function interface from lcp */
#include "ppp_arbf.h"   /* to get function interface from arb */
#include "ppp_onas.h"   /* to get signal interface from ona */
#include "ppp_arbs.h"   /* to get signal interface from arb */

/*==== CONST ================================================================*/

/*==== LOCAL VARS ===========================================================*/

/*==== PRIVATE FUNCTIONS ====================================================*/

/*==== PUBLIC FUNCTIONS =====================================================*/



/*
+------------------------------------------------------------------------------
| Function    : sig_arb_lcp_parameters_req
+------------------------------------------------------------------------------
| Description : Handles the internal signal SIG_ARB_LCP_PARAMETERS_REQ
|
| Parameters  : mru  - Maximum Receive Unit
|               ap   - Authentication Protocol
|               accm - Async Control Character Map
|
+------------------------------------------------------------------------------
*/
GLOBAL void sig_arb_lcp_parameters_req (USHORT mru, UBYTE ap, ULONG accm)
{ 
  TRACE_ISIG( "sig_arb_lcp_parameters_req" );

  ppp_data->lcp.req_mru=mru;
  ppp_data->lcp.req_accm=accm;
  ppp_data->lcp.req_ap=ap;
  
} /* sig_arb_lcp_parameters_req() */



/*
+------------------------------------------------------------------------------
| Function    : sig_arb_lcp_modify_ap_req
+------------------------------------------------------------------------------
| Description : Handles the internal signal SIG_ARB_LCP_MODIFY_AP_REQ
|
| Parameters  : ap - Authentication Protocol
|
+------------------------------------------------------------------------------
*/
GLOBAL void sig_arb_lcp_modify_ap_req (UBYTE ap) 
{ 
  TRACE_ISIG( "sig_arb_lcp_modify_ap_req" );

  ppp_data->lcp.req_ap=ap;

} /* sig_arb_lcp_modify_ap_req() */



/*
+------------------------------------------------------------------------------
| Function    : sig_arb_lcp_packet_req
+------------------------------------------------------------------------------
| Description : Handles the internal signal SIG_ARB_LCP_PACKET_REQ
|
| Parameters  : packet - pointer to a generic data descriptor
|
+------------------------------------------------------------------------------
*/
GLOBAL void sig_arb_lcp_packet_req (T_desc2* packet) 
{
  UBYTE forward;
  UBYTE isnew = 0;

  TRACE_ISIG( "sig_arb_lcp_packet_req" );

  /*
   * depend on the code-field call appropriate function
   */
  switch(packet->buffer[0])
  {
    case CODE_CONF_REQ:
      lcp_rcr(&packet, &isnew, &forward);
      break;
    case CODE_CONF_ACK:
      lcp_rca(packet, &forward);
      break;
    case CODE_CONF_NAK:
      lcp_rcn(&packet, &forward);
      break;
    case CODE_CONF_REJ:
      lcp_rcj(&packet, &forward);
      break;
    case CODE_TERM_REQ:
      lcp_rtr(&packet, &forward);
      break;
    case CODE_TERM_ACK:
      lcp_rta(packet, &forward);
      break;
    case CODE_CODE_REJ:
      lcp_rxj(&packet, &forward);
      break;
    case CODE_PROT_REJ:
      lcp_rpj(packet, &forward);
      break;
    case CODE_ECHO_REQ:
      lcp_rer(&packet, &forward);
      break;
    case CODE_ECHO_REP:
    case CODE_DISC_REQ:
      lcp_rep_rdr(packet, &forward);
      break;
    default:
      lcp_ruc(&packet, &forward);
      break;
  }
  switch(forward)
  {
    case FORWARD_RCRP:
      sig_any_ona_rcrp_ind(DTI_PID_LCP, packet);
      break;
    case FORWARD_RCRN:
      sig_any_ona_rcrn_ind(DTI_PID_LCP, packet, isnew);
      break;
    case FORWARD_RCA:
      sig_any_ona_rca_ind(DTI_PID_LCP);
      break;
    case FORWARD_RCN:
      sig_any_ona_rcn_ind(DTI_PID_LCP, packet);
      break;
    case FORWARD_RTR:
      sig_any_ona_rtr_ind(DTI_PID_LCP, packet);
      break;
    case FORWARD_RTA:
      sig_any_ona_rta_ind(DTI_PID_LCP);
      break;
    case FORWARD_RXJN:
      sig_any_ona_rxjn_ind(DTI_PID_LCP, packet);
      break;
    case FORWARD_RUC:
      sig_any_ona_ruc_ind(DTI_PID_LCP, packet);
      break;
    case FORWARD_RER:
      sig_any_ona_rxr_ind(DTI_PID_LCP, packet);
      break;
    case FORWARD_RPJ_LCP:
      sig_lcp_arb_rpj_ind(DTI_PID_LCP);
      break;
    case FORWARD_RPJ_PAP:
      sig_lcp_arb_rpj_ind(DTI_PID_PAP);
      break;
    case FORWARD_RPJ_CHAP:
      sig_lcp_arb_rpj_ind(DTI_PID_CHAP);
      break;
    case FORWARD_RPJ_IPCP:
      sig_lcp_arb_rpj_ind(DTI_PID_IPCP);
      break;
    case FORWARD_RPJ_IP:
      sig_lcp_arb_rpj_ind(DTI_PID_IP);
      break;
    case FORWARD_RPJ_CTCP:
      sig_lcp_arb_rpj_ind(DTI_PID_CTCP);
      break;
    case FORWARD_RPJ_UTCP:
      sig_lcp_arb_rpj_ind(DTI_PID_UTCP);
      break;
    default:
      arb_discard_packet(packet);
      break;
  }
} /* sig_arb_lcp_packet_req() */



/*
+------------------------------------------------------------------------------
| Function    : sig_arb_lcp_open_req
+------------------------------------------------------------------------------
| Description : Handles the internal signal SIG_ARB_LCP_OPEN_REQ
|
| Parameters  : no parameters
|
+------------------------------------------------------------------------------
*/
GLOBAL void sig_arb_lcp_open_req () 
{
  T_desc2* packet;
  TRACE_ISIG( "sig_arb_lcp_open_req" );

  /*
   * reset all rejected configuration options
   */
  ppp_data->lcp.s_rejected=0;
  /*
   * set configuration start values
   */
  ppp_data->lcp.s_mru=ppp_data->lcp.req_mru;
  ppp_data->lcp.s_accm=ppp_data->lcp.req_accm;
  switch(ppp_data->lcp.req_ap)
  {
    case PPP_AP_NO:
    case PPP_AP_PAP:
    case PPP_AP_CHAP:
      ppp_data->lcp.n_ap=ppp_data->lcp.req_ap;
      break;
    default:
      ppp_data->lcp.n_ap=PPP_AP_CHAP;
      break;
  }
  ppp_data->lcp.s_pfc=TRUE;
  ppp_data->lcp.s_acfc=TRUE;
  ppp_data->lcp.scr=FALSE;
  ppp_data->lcp.str=FALSE;
  ppp_data->lcp.rcr=FALSE;
  /*
   * set new identifier
   */
  ppp_data->lcp.nscri++;
  /*
   * create configure request packet
   */
  lcp_get_scr(&packet);
  /*
   * inform ONA about the open signal
   */
  sig_any_ona_open_ind(DTI_PID_LCP, packet);

} /* sig_arb_lcp_open_req() */



/*
+------------------------------------------------------------------------------
| Function    : sig_arb_lcp_close_req
+------------------------------------------------------------------------------
| Description : Handles the internal signal SIG_ARB_LCP_CLOSE_REQ
|
| Parameters  : no parameters
|
+------------------------------------------------------------------------------
*/
GLOBAL void sig_arb_lcp_close_req () 
{ 
  T_desc2* packet;

  TRACE_ISIG( "sig_arb_lcp_close_req" );
  
  /*
   * set new identifier
   */
  ppp_data->lcp.nstri++;
  /*
   * create terminate request packet
   */
  lcp_get_str(&packet);
  /*
   * inform ONA about the close signal
   */
  sig_any_ona_close_ind(DTI_PID_LCP, packet);

} /* sig_arb_lcp_close_req() */



/*
+------------------------------------------------------------------------------
| Function    : sig_arb_lcp_down_req
+------------------------------------------------------------------------------
| Description : Handles the internal signal SIG_ARB_LCP_DOWN_REQ
|
| Parameters  : no parameters
|
+------------------------------------------------------------------------------
*/
GLOBAL void sig_arb_lcp_down_req () 
{ 
  TRACE_ISIG( "sig_arb_lcp_down_req" );
  
  /*
   * inform ONA about the down signal
   */
  sig_any_ona_down_ind(DTI_PID_LCP);
} /* sig_arb_lcp_down_req() */



/*
+------------------------------------------------------------------------------
| Function    : sig_arb_lcp_to_req
+------------------------------------------------------------------------------
| Description : Handles the internal signal SIG_ARB_LCP_TO_REQ
|
| Parameters  : no parameters
|
+------------------------------------------------------------------------------
*/
GLOBAL void sig_arb_lcp_to_req () 
{ 
  TRACE_ISIG( "sig_arb_lcp_to_req" );
  
  /*
   * inform ONA about the time out signal
   */
  sig_any_ona_to_ind(DTI_PID_LCP);
} /* sig_arb_lcp_to_req() */



/*
+------------------------------------------------------------------------------
| Function    : sig_ona_lcp_tld_req
+------------------------------------------------------------------------------
| Description : Handles the internal signal SIG_ONA_LCP_TLD_REQ
|
| Parameters  : no parameters
|
+------------------------------------------------------------------------------
*/
GLOBAL void sig_ona_lcp_tld_req()
{
  TRACE_ISIG( "sig_ona_lcp_tld_req" );

  /*
   * inform ARB about This-Layer-Down signal
   */
  sig_lcp_arb_tld_ind();
} /* sig_ona_lcp_tld_req() */



/*
+------------------------------------------------------------------------------
| Function    : sig_ona_lcp_tlf_req
+------------------------------------------------------------------------------
| Description : Handles the internal signal SIG_ONA_LCP_TLF_REQ
|
| Parameters  : no parameters
|
+------------------------------------------------------------------------------
*/
GLOBAL void sig_ona_lcp_tlf_req()
{
  TRACE_ISIG( "sig_ona_lcp_tlf_req" );

  /*
   * inform ARB about This-Layer-Finish signal
   */
  sig_any_arb_tlf_ind();
} /* sig_ona_lcp_tlf_req() */



/*
+------------------------------------------------------------------------------
| Function    : sig_ona_lcp_str_req
+------------------------------------------------------------------------------
| Description : Handles the internal signal SIG_ONA_LCP_STR_REQ
|
| Parameters  : no parameters
|
+------------------------------------------------------------------------------
*/
GLOBAL void sig_ona_lcp_str_req(T_desc2** ptr_packet)
{
  TRACE_ISIG( "sig_ona_lcp_str_req" );

  /*
   * create terminate request packet
   */
  lcp_get_str(ptr_packet);
} /* sig_ona_lcp_str_req() */



/*
+------------------------------------------------------------------------------
| Function    : sig_ona_lcp_scr_req
+------------------------------------------------------------------------------
| Description : Handles the internal signal SIG_ONA_LCP_SCR_REQ
|
| Parameters  : no parameters
|
+------------------------------------------------------------------------------
*/
GLOBAL void sig_ona_lcp_scr_req(T_desc2** ptr_packet)
{
  TRACE_ISIG( "sig_ona_lcp_scr_req" );

  /*
   * create terminate request packet
   */
  lcp_get_scr(ptr_packet);
} /* sig_ona_lcp_scr_req() */



/*
+------------------------------------------------------------------------------
| Function    : sig_ona_lcp_tlu_req
+------------------------------------------------------------------------------
| Description : Handles the internal signal SIG_ONA_LCP_TLU_REQ
|
| Parameters  : no parameters
|
+------------------------------------------------------------------------------
*/
GLOBAL void sig_ona_lcp_tlu_req()
{
  TRACE_ISIG( "sig_ona_lcp_tlu_req" );

  TRACE_EVENT( "LCP Established" );
  if(ppp_data->lcp.n_ap EQ PPP_AP_CHAP)
  {
    TRACE_EVENT("Authentication Protocol: CHAP");
  }
  else if(ppp_data->lcp.n_ap EQ PPP_AP_PAP)
  {
    TRACE_EVENT("Authentication Protocol: PAP");
  }
  else if(ppp_data->lcp.n_ap EQ PPP_AP_NO)
  {
    TRACE_EVENT("Authentication Protocol: no authentication");
  }
  /*
   * inform ARB about This-Layer-Up signal
   */
  sig_any_arb_tlu_ind();
} /* sig_ona_lcp_tlu_req() */