view src/g23m-gprs/grlc/grlc_gfff.c @ 600:8f50b202e81f

board preprocessor conditionals: prep for more FC hw in the future This change eliminates the CONFIG_TARGET_FCDEV3B preprocessor symbol and all preprocessor conditionals throughout the code base that tested for it, replacing them with CONFIG_TARGET_FCFAM or CONFIG_TARGET_FCMODEM. These new symbols are specified as follows: CONFIG_TARGET_FCFAM is intended to cover all hardware designs created by Mother Mychaela under the FreeCalypso trademark. This family will include modem products (repackagings of the FCDEV3B, possibly with RFFE or even RF transceiver changes), and also my desired FreeCalypso handset product. CONFIG_TARGET_FCMODEM is intended to cover all FreeCalypso modem products (which will be firmware-compatible with the FCDEV3B if they use TI Rita transceiver, or will require a different fw build if we switch to one of Silabs Aero transceivers), but not the handset product. Right now this CONFIG_TARGET_FCMODEM preprocessor symbol is used to conditionalize everything dealing with MCSI. At the present moment the future of FC hardware evolution is still unknown: it is not known whether we will ever have any beyond-FCDEV3B hardware at all (contingent on uncertain funding), and if we do produce further FC hardware designs, it is not known whether they will retain the same FIC modem core (triband), if we are going to have a quadband design that still retains the classic Rita transceiver, or if we are going to switch to Silabs Aero II or some other transceiver. If we produce a quadband modem that still uses Rita, it will run exactly the same fw as the FCDEV3B thanks to the way we define TSPACT signals for the RF_FAM=12 && CONFIG_TARGET_FCFAM combination, and the current fcdev3b build target will be renamed to fcmodem. OTOH, if that putative quadband modem will be Aero-based, then it will require a different fw build target, the fcdev3b target will stay as it is, and the two targets will both define CONFIG_TARGET_FCFAM and CONFIG_TARGET_FCMODEM, but will have different RF_FAM numbers. But no matter which way we are going to evolve, it is not right to have conditionals on CONFIG_TARGET_FCDEV3B in places like ACI, and the present change clears the way for future evolution.
author Mychaela Falconia <falcon@freecalypso.org>
date Mon, 01 Apr 2019 01:05:24 +0000
parents 219afcfc6250
children
line wrap: on
line source

/*  
+----------------------------------------------------------------------------- 
|  Project :  GPRS (8441)
|  Modul   :  GRLC
+----------------------------------------------------------------------------- 
|  Copyright 2002 Texas Instruments Berlin, AG 
|                 All rights reserved. 
| 
|                 This file is confidential and a trade secret of Texas 
|                 Instruments Berlin, AG 
|                 The receipt of or possession of this file does not convey 
|                 any rights to reproduce or disclose its contents or to 
|                 manufacture, use, or sell anything it may describe, in 
|                 whole, or in part, without the specific written consent of 
|                 Texas Instruments Berlin, AG. 
+----------------------------------------------------------------------------- 
|  Purpose :  This module implements local functions for service GFF of
|             entity GRLC.
+----------------------------------------------------------------------------- 
*/ 

#ifndef  GRLC_GFFF_C
#define  GRLC_GFFF_C
#endif

#define ENTITY_GRLC

/*==== INCLUDES =============================================================*/
#include <string.h>
#include "typedefs.h"   /* to get Condat data types */
#include <stdio.h>
#include "vsi.h"        /* to get a lot of macros */
#include "macdef.h"
#include "gprs.h"
#include "gsm.h"        /* to get a lot of macros */
#include "ccdapi.h"     /* to get CCD API */
#include "prim.h"       /* to get the definitions of used SAP and directions */
#include "message.h"
#include "grlc.h"        
#include "grlc_f.h" 
#include "grlc_tms.h"   
#include "grlc_rus.h"   
#include "grlc_rds.h"   
#include "grlc_gfff.h"        
#include "cl_rlcmac.h"

/*==== CONST ================================================================*/

#define D_DL_DUMMY_c 0x25

/*==== LOCAL VARS ===========================================================*/

/*==== PRIVATE FUNCTIONS ====================================================*/

/*==== PUBLIC FUNCTIONS =====================================================*/

/*
+------------------------------------------------------------------------------
| Function    : gff_init
+------------------------------------------------------------------------------
| Description : The function gff_init() .... 
|
| Parameters  : dummy - description of parameter dummy
|
+------------------------------------------------------------------------------
*/
GLOBAL void gff_init ( void )
{ 
  TRACE_FUNCTION( "gff_init" );

  grlc_data->gff.rlc_status = RLC_STATUS_NULL;
  grlc_data->ul_tfi         = 0xFF;
  grlc_data->dl_tfi         = 0xFF;

  grlc_data->next_poll_fn      = 1;
  grlc_data->ul_poll_pos_index = 0xFF;
  grlc_data->nr_of_crc_errors  = 0xFFFF;
  grlc_data->ta_value          = 0xFF;

  INIT_STATE(GFF,GFF_DEACTIVE); 
} /* gff_init() */



/*
+------------------------------------------------------------------------------
| Function    : gff_tbf_init
+------------------------------------------------------------------------------
| Description : The function gff_tbf_init() .... 
|
| Parameters  : dummy - description of parameter dummy
|
+------------------------------------------------------------------------------
*/
GLOBAL void gff_tbf_init ( void )
{ 
  TRACE_FUNCTION( "gff_tbf_init" );
 
  /*
   * set segmented control block array
   */
  grlc_data->ul_poll_pos_index = 0;
  grlc_data->nr_of_crc_errors  = 0;


#if defined (_TARGET_)
  {
    UBYTE i;
    /* target debugging*/

    grlc_data->last_dl_fn = 1; 
    
    for (i=0; i < CALL_ERROR_NR_OF_ST_FN;i++)
    {
      grlc_data->ul_fn_store[i]  = 0;
      grlc_data->ul_fn_errors[i] = 0;
      grlc_data->dl_fn_store[i]  = 0;
      grlc_data->dl_fn_errors[i] = 0;
    }
    grlc_data->ul_cnt_syn        = 0;  /*for target, count calls in rlc uplink*/
    grlc_data->ul_cnt_asyn       = 0;  /*for target, count calls in gffp mac_ready_ind*/
    grlc_data->dl_cnt_syn        = 0;  /*for target, count calls in rlc downlink*/
    grlc_data->dl_cnt_asyn       = 0;  /*for target, count calls in gffp mac_data_ind*/
    grlc_data->ul_call_errors    = 0;  /*for target, count calls in rlc uplink during grlc is active*/
    grlc_data->dl_call_errors    = 0;  /*for target, count calls in rlc downlink during grlc is active*/
  }
#endif /* defined (_TARGET_) */

} /* gff_tbf_init() */



/*
+------------------------------------------------------------------------------
| Function    : gff_send_ctrl_block
+------------------------------------------------------------------------------
| Description : The function gff_send_ctrl_block() .... 
|
| Parameters  : dummy - description of parameter dummy
|
+------------------------------------------------------------------------------
*/
GLOBAL void gff_send_ctrl_block (ULONG fn_i, UBYTE tn_i, UBYTE * ptr_ctrl_block_i )
{
  PALLOC(cgrlc_data_ind,CGRLC_DATA_IND); /*T_CGRLC_DATA_IND*/

  TRACE_FUNCTION( "gff_send_ctrl_block" );

  cgrlc_data_ind->fn = fn_i;
  cgrlc_data_ind->tn = tn_i;  

  memcpy( cgrlc_data_ind->data_array, 
          ptr_ctrl_block_i,
          CGRLC_MAX_CTRL_MSG_SIZE );

  PSEND(hCommGRR,cgrlc_data_ind);

}/* gff_send_ctrl_block() */




/*
+------------------------------------------------------------------------------
| Function    : gff_analyse_dl_data
+------------------------------------------------------------------------------
| Description : The function gff_analyse_dl_data() .... It returns whether
|               the downlink block was intended for that MS or not.
|
| Parameters  : dummy - description of parameter dummy
|
+------------------------------------------------------------------------------
*/
GLOBAL BOOL gff_analyse_dl_data (ULONG fn_i, T_dl_data * ptr_dl_data_i )
{ 

  BOOL        tfi_correct = FALSE;
  UBYTE       payload,rrbp,sp,tfi,*ptr_blk;

  TRACE_FUNCTION( "gff_analyse_dl_data" );

/*
 *  Layer 1 buffer
 *  B1 B0  --> ptr_dl_data_i->dl_block[0]
 *  B3 B2
 *
 * B0 is the mac header
 */


  ptr_blk = (UBYTE *) (&ptr_dl_data_i->dl_block[0]);


  payload = (ptr_blk[0] & 0xC0) >> 6;
  rrbp    = (ptr_blk[0] & 0x30) >> 4;
  sp      = (ptr_blk[0] & 0x08) >> 3;

  
  /* 
   * In Test mode B,if there is CRC error on the payload data the MS will,
   * where required by the USF, transmit the decoded payload data. The block
   * transmitted will be a valid uplink block format.
   */
  if(((ptr_dl_data_i->block_status & 0x0100) NEQ 0x0000) AND ((grlc_data->testmode.mode EQ CGRLC_LOOP)))
  {
    UBYTE       bsn,e_bit;
     
    bsn     = (ptr_blk[2] & 0xFE)>>1;
    e_bit   = (ptr_blk[2] & 0x01);
    
    TRACE_EVENT(" Bad CRC - In Testmode B ");

    sig_gff_rd_data(  fn_i, 
                        (UBYTE)ptr_dl_data_i->tn, 
                        ptr_dl_data_i->block_status,
                        rrbp,
                        sp,
                        bsn,
                        0,
                        e_bit,
                        ptr_blk);
  }
  else
  {
    if(payload EQ RLC_DATA_BLOCK) 
    {
      UBYTE       bsn,fbi,e_bit;
     
      tfi     = (ptr_blk[1] & 0x3E) >> 1;
      bsn     = (ptr_blk[2] & 0xFE)>>1;
      fbi     = (ptr_blk[1] & 0x01);
      e_bit   = (ptr_blk[2] & 0x01);
      ptr_blk = (UBYTE *) (&ptr_blk[3]);

      if((tfi EQ grlc_data->dl_tfi) AND
         ((0x80>>ptr_dl_data_i->tn) & grlc_data->dl_tn_mask))
      {
        tfi_correct = TRUE;
        if(sp)
        {
          grlc_save_poll_pos ( fn_i,(UBYTE)ptr_dl_data_i->tn,rrbp, CGRLC_POLL_DATA, 3);
        }
        sig_gff_rd_data(  fn_i, 
                          (UBYTE)ptr_dl_data_i->tn, 
                          ptr_dl_data_i->block_status,
                          rrbp,
                          sp,
                          bsn,
                          fbi,
                          e_bit,
                          ptr_blk);
  #ifdef _TARGET_
      
        TRACE_BINDUMP( hCommGRLC, TC_USER6,
                 		  "D_DATA_BLOCK including MAC header", &ptr_dl_data_i->dl_block[0],53);
  #endif /* _TARGET_ */

      }
      else
      {
        TRACE_EVENT_P6("wrong tfi in data block  ad.tfi=%d dl_tfi=%d  bsn=%d || tn=%d->mask=%x tn_mask=%x"
                                                                ,tfi
                                                                ,grlc_data->dl_tfi
                                                                ,bsn
                                                                ,ptr_dl_data_i->tn
                                                                ,(0x80>>ptr_dl_data_i->tn)
                                                                ,grlc_data->dl_tn_mask);
      }


    }
    else
    {
      /*
       * any rlc control message received.
       * check if it is a packet uplink ack/nack and if it is adressed to MS
       */
      ULONG tc_user        = TC_USER4;
      UBYTE trace_msg_type = D_MSG_TYPE_UNKNOWN_c;

      UBYTE msg_type=0,i=0;

      if( payload EQ CTRL_BLK_NO_OPT )
      {
        msg_type = trace_msg_type = ptr_blk[1]>>2; 
        i        = 2; /* Byte position of tfi in puan */
      }
      else if( payload EQ CTRL_BLK_OPT )
      {
        if( !(ptr_blk[1] & 0x01) )           /* no tfi octet present: ac   = 0 */
        {
          if( !(ptr_blk[1] & 0x80) )         /* not segmented       : rbsn = 0 */
          {
            if( (ptr_blk[1] & 0x02) )        /* not segmented       : fs   = 1 */ 
            {
              msg_type = trace_msg_type = ptr_blk[2]>>2; 
              i        = 3; /* Byte position of tfi in puan */
            }
            else                             /* segmented           : fs   = 0 */
            {
              trace_msg_type = ptr_blk[2]>>2; 
            }
          }
          else                               /* segmented           : rbsn = 1 */
          {
            trace_msg_type = D_MSG_TYPE_2ND_SEGMENT_c;
          }
        }
        else                                 /* tfi octet present   : ac   = 1 */
        {
          if( !(ptr_blk[1] & 0x80) )         /* not segmented       : rbsn = 0 */ 
          {
            if( (ptr_blk[1] & 0x02) )        /* not segmented       : fs   = 1 */
            {
              msg_type = trace_msg_type = ptr_blk[3]>>2;
              i        = 4; /* Byte position of tfi in puan */
            }
            else                             /* segmented           : fs   = 0 */
            {
              trace_msg_type = ptr_blk[3]>>2;
            }
          }
          else                               /* segmented           : rbsn = 1 */ 
          {
            trace_msg_type = D_MSG_TYPE_2ND_SEGMENT_c;
          }
        }
      }

      /*
       * send control message to GRR
       */
      if(msg_type NEQ D_DL_DUMMY_c ) /* No Dummy blocks sent to GRR , to primitive load between GRR and GRLC*/
      {  
        gff_send_ctrl_block(fn_i, (UBYTE)ptr_dl_data_i->tn,ptr_blk);
      }
  
      if( trace_msg_type EQ D_DL_DUMMY_c )
      {
        tc_user = TC_USER5;
      }

      TRACE_BINDUMP( hCommGRLC, tc_user,
                     cl_rlcmac_get_msg_name( trace_msg_type, RLC_MAC_ROUTE_DL ),
                     ptr_blk, MAX_L2_FRAME_SIZE ); /*lint !e569*/

      if(msg_type EQ D_GRLC_UL_ACK_c)
      {
        /*
         * tfi check for packet uplink ack nack
         */
        if(i EQ 4                AND                          /* tfi in header present       */
          !(ptr_blk[2] & 0x01)   AND                          /* D=0 packet uplink tfi add.  */
          (((ptr_blk[2]) & 0x3E)>>1) EQ grlc_data->ul_tfi)    /* header tfi addressed to MS  */
        {
          tfi = ((ptr_blk[2]) & 0x3E)>>1;
        }
        else
        {
          tfi = ((ptr_blk[i]) & 0x3E)>>1;  /* Take tfi from airmessage*/
        }

        if((grlc_data->ul_tfi EQ tfi) AND
           ((0x80>>ptr_dl_data_i->tn) & grlc_data->ul_tn_mask))
        {
          T_MSGBUF msg;
          UBYTE    data[22];

          memset(data,0xEE,22);

          msg.l_buf  = (23 - i + 1) * 8;
          msg.o_buf  = 0;
          msg.buf[0] = data[0];

          memcpy(msg.buf, &(ptr_blk[i-1]), (msg.l_buf)/8);


          if(sp)
          {
            grlc_save_poll_pos ( fn_i,(UBYTE)ptr_dl_data_i->tn,rrbp, CGRLC_POLL_UACK, 3);
          }
          grlc_decode_grlc (&msg);
          sig_gff_ru_ul_ack ( fn_i,(UBYTE)ptr_dl_data_i->tn,rrbp,sp); 
        } 
      }
    }
  }


  return( tfi_correct );
} /* gff_analyse_dl_data() */


/*
+------------------------------------------------------------------------------
| Function    : gff_handle_continious_ta
+------------------------------------------------------------------------------
| Description : store the new ta value, and pass it to L1
|
| Parameters  : 
|
+------------------------------------------------------------------------------
*/
GLOBAL void gff_handle_continious_ta ( void )
{

  TRACE_FUNCTION( "gff_handle_continious_ta" );

 
  if(grlc_data->func.mac_ready_ind.ta_value NEQ 0xFF)
  {
    /*
     * valid TA in L1
     */
    if(grlc_data->ta_value NEQ grlc_data->func.mac_ready_ind.ta_value )
    {
      PALLOC(cgrlc_ta_value_ind,CGRLC_TA_VALUE_IND);

      /*
       * Current TA in GRLC differs from the TA in L1: store in GRLC
       */
      grlc_data->ta_value           = grlc_data->func.mac_ready_ind.ta_value;
      cgrlc_ta_value_ind->ta_value  = grlc_data->ta_value;
      PSEND(hCommGRR,cgrlc_ta_value_ind);
    }
  }

} /* gff_handle_continious_ta */

/*
+------------------------------------------------------------------------------
| Function    : gff_clip_rxlev
+------------------------------------------------------------------------------
| Description : This function is used to clip received signal level values.
|
| Parameters  : clipp  - pointer to clipped received signal level values
|               rxlev  - pointer to received signal level values
|               number - number of received signal level values
|
+------------------------------------------------------------------------------
*/
GLOBAL void gff_clip_rxlev ( UBYTE *clipp, UBYTE *rxlev, UBYTE number )
{ 
  UBYTE i; /* used for counting */
  
  TRACE_FUNCTION( "gff_clip_rxlev" );

  for( i = 0; i < number; i++ )
  { 
    if( (signed char)( rxlev[i] ) <   MAC_RXLEV_MIN  AND
                       rxlev[i]   NEQ MAC_RXLEV_NONE     )
    {
      clipp[i] = MAC_RXLEV_MIN;
    }
    else if ( (signed char)( rxlev[i] ) > MAC_RXLEV_MAX )
    {
      clipp[i] = MAC_RXLEV_MAX;
    }
    else if( rxlev[i] EQ MAC_RXLEV_NONE )
    {
      clipp[i] = MAC_RXLEV_NONE;
    }
    else
    {
      clipp[i] = rxlev[i];
    }
  }
} /* gff_clip_rxlev() */