FreeCalypso > hg > fc-magnetite
view src/g23m-gprs/grlc/grlc_gffp.c @ 600:8f50b202e81f
board preprocessor conditionals: prep for more FC hw in the future
This change eliminates the CONFIG_TARGET_FCDEV3B preprocessor symbol and
all preprocessor conditionals throughout the code base that tested for it,
replacing them with CONFIG_TARGET_FCFAM or CONFIG_TARGET_FCMODEM. These
new symbols are specified as follows:
CONFIG_TARGET_FCFAM is intended to cover all hardware designs created by
Mother Mychaela under the FreeCalypso trademark. This family will include
modem products (repackagings of the FCDEV3B, possibly with RFFE or even
RF transceiver changes), and also my desired FreeCalypso handset product.
CONFIG_TARGET_FCMODEM is intended to cover all FreeCalypso modem products
(which will be firmware-compatible with the FCDEV3B if they use TI Rita
transceiver, or will require a different fw build if we switch to one of
Silabs Aero transceivers), but not the handset product. Right now this
CONFIG_TARGET_FCMODEM preprocessor symbol is used to conditionalize
everything dealing with MCSI.
At the present moment the future of FC hardware evolution is still unknown:
it is not known whether we will ever have any beyond-FCDEV3B hardware at all
(contingent on uncertain funding), and if we do produce further FC hardware
designs, it is not known whether they will retain the same FIC modem core
(triband), if we are going to have a quadband design that still retains the
classic Rita transceiver, or if we are going to switch to Silabs Aero II
or some other transceiver. If we produce a quadband modem that still uses
Rita, it will run exactly the same fw as the FCDEV3B thanks to the way we
define TSPACT signals for the RF_FAM=12 && CONFIG_TARGET_FCFAM combination,
and the current fcdev3b build target will be renamed to fcmodem. OTOH, if
that putative quadband modem will be Aero-based, then it will require a
different fw build target, the fcdev3b target will stay as it is, and the
two targets will both define CONFIG_TARGET_FCFAM and CONFIG_TARGET_FCMODEM,
but will have different RF_FAM numbers. But no matter which way we are
going to evolve, it is not right to have conditionals on CONFIG_TARGET_FCDEV3B
in places like ACI, and the present change clears the way for future
evolution.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Mon, 01 Apr 2019 01:05:24 +0000 |
parents | 219afcfc6250 |
children |
line wrap: on
line source
/* +----------------------------------------------------------------------------- | Project : GPRS (8441) | Modul : GRLC +----------------------------------------------------------------------------- | Copyright 2002 Texas Instruments Berlin, AG | All rights reserved. | | This file is confidential and a trade secret of Texas | Instruments Berlin, AG | The receipt of or possession of this file does not convey | any rights to reproduce or disclose its contents or to | manufacture, use, or sell anything it may describe, in | whole, or in part, without the specific written consent of | Texas Instruments Berlin, AG. +----------------------------------------------------------------------------- | Purpose : This module implements primitive handler functions for service | GFF of entity GRLC. +----------------------------------------------------------------------------- */ #ifndef GRLC_GFFP_C #define GRLC_GFFP_C #endif #define ENTITY_GRLC /*==== INCLUDES =============================================================*/ #include <stdio.h> #include "typedefs.h" /* to get Condat data types */ #include "vsi.h" /* to get a lot of macros */ #include "macdef.h" #include "gprs.h" #include "gsm.h" /* to get a lot of macros */ #include "ccdapi.h" /* to get CCD API */ #include "prim.h" /* to get the definitions of used SAP and directions */ #include "message.h" #include "grlc.h" /* to get the global entity definitions */ #include "grlc_gfff.h" #include "grlc_f.h" #include <string.h> #include "grlc_rus.h" #include "grlc_rds.h" #include "grlc_func.h" #include "grlc_tpcs.h" #include "grlc_meass.h" #include "cl_rlcmac.h" #if defined REL99 AND defined TI_PS_FF_TBF_EST_PACCH #include "grlc_tms.h" #endif /*==== CONST ================================================================*/ #define BITS_PER_RADIO_BLOCK 456 /*==== LOCAL VARS ===========================================================*/ /*==== PRIVATE FUNCTIONS ====================================================*/ /*==== PUBLIC FUNCTIONS =====================================================*/ /* +------------------------------------------------------------------------------ | Function : gff_mac_pwr_ctrl_ind +------------------------------------------------------------------------------ | Description : Handles the primitive MAC_PWR_CTRL_IND | | Parameters : *mac_pwr_ctrl_ind - Ptr to primitive payload | +------------------------------------------------------------------------------ */ GLOBAL void gff_mac_pwr_ctrl_ind ( T_MAC_PWR_CTRL_IND * mac_pwr_ctrl_ind ) { TRACE_FUNCTION( "gff_mac_pwr_ctrl_ind" ); #if defined _TARGET_ && !defined (NTRACE) if( grlc_data->tpc.n_tpc_trace & M_TPC_TRACE_FUNCTION ) { T_L1TEST_CALL_MPHP_POWER_CONTROL l1test_call; UBYTE i; l1test_call.assignment_id = ( U8 )mac_pwr_ctrl_ind->assignment_id; l1test_call.crc_error = mac_pwr_ctrl_ind->crc_error; l1test_call.bcch_level = ( S8 )mac_pwr_ctrl_ind->bcch_level; for( i = 0; i < L1TEST_BURST_PER_BLOCK; i++ ) { l1test_call.burst_level[i] = ( S8 )mac_pwr_ctrl_ind->burst_level[i]; l1test_call.radio_freq [i] = mac_pwr_ctrl_ind->radio_freq[i]; } TRACE_MEMORY_PRIM ( hCommL1, hCommGRLC, L1TEST_CALL_MPHP_POWER_CONTROL, &l1test_call, sizeof( T_L1TEST_CALL_MPHP_POWER_CONTROL ) ); } #endif /* #if defined _TARGET_ && !defined (NTRACE) */ gff_clip_rxlev( &mac_pwr_ctrl_ind->bcch_level, &mac_pwr_ctrl_ind->bcch_level, 1 ); gff_clip_rxlev( mac_pwr_ctrl_ind->burst_level, mac_pwr_ctrl_ind->burst_level, MAC_BURST_PER_BLOCK ); sig_gff_tpc_pwr_ctrl_ind( mac_pwr_ctrl_ind ); #if defined _TARGET_ && !defined (NTRACE) if( grlc_data->tpc.n_tpc_trace & M_TPC_TRACE_FUNCTION ) { T_L1TEST_RETURN_MPHP_POWER_CONTROL l1test_return; tpc_get_pch( &l1test_return.pch[0] ); TRACE_MEMORY_PRIM ( hCommGRLC, hCommL1, L1TEST_RETURN_MPHP_POWER_CONTROL, &l1test_return, sizeof( T_L1TEST_RETURN_MPHP_POWER_CONTROL ) ); } #endif /* #if defined _TARGET_ && !defined (NTRACE) */ } /* gff_mac_pwr_ctrl_ind() */ /* +------------------------------------------------------------------------------ | Function : gff_mac_data_ind +------------------------------------------------------------------------------ | Description : Handles the primitive MAC_DATA_IND | | Parameters : *mac_data_ind - Ptr to primitive payload | +------------------------------------------------------------------------------ */ GLOBAL void gff_mac_data_ind ( T_MAC_DATA_IND * mac_data_ind ) { UBYTE i; USHORT rx_no; TRACE_FUNCTION( "mac_data_ind" ); rx_no = grlc_data->func.dl_blocks.data_ptr.rx_no; #ifdef _SIMULATION_ { /* * copy received primitive to grlc_data->func.mac_data_ind */ TRACE_EVENT_P5("mac_data_ind fn=%ld tn= %d -> mask=%x UL_MASK=%x DL_MASK=%x" ,mac_data_ind->fn ,mac_data_ind->dl_data.tn ,0x80>>mac_data_ind->dl_data.tn ,grlc_data->ul_tn_mask ,grlc_data->dl_tn_mask); grlc_data->dl_fn = mac_data_ind->fn; grlc_data->ul_fn = mac_data_ind->fn; memcpy ( &(grlc_data->func.mac_data_ind), mac_data_ind, sizeof(T_MAC_DATA_IND)); PFREE(mac_data_ind); mac_data_ind = &(grlc_data->func.mac_data_ind); rx_no = 1; } #endif switch( GET_STATE( GFF ) ) { case GFF_ACTIVE: #if defined REL99 AND defined TI_PS_FF_TBF_EST_PACCH case GFF_TWO_PHASE: #endif { T_BER_IND ber_ind; ber_ind.num_dl_blck = 0; for(i=0; i< rx_no; i++) { #ifdef _TARGET_ { /* * copy next primitive to grlc_data->func.mac_data_ind */ grlc_data->func.mac_data_ind.fn = grlc_data->func.dl_blocks.fn; grlc_data->func.mac_data_ind.rx_no = grlc_data->func.dl_blocks.data_ptr.rx_no; grlc_data->func.mac_data_ind.dl_data = grlc_data->func.dl_blocks.data_ptr.dl_data[i]; mac_data_ind = &(grlc_data->func.mac_data_ind); } TRACE_MEMORY_PRIM ( hCommL1, hCommGRLC, MAC_DATA_IND, mac_data_ind, sizeof( T_MAC_DATA_IND ) ); #endif /* #ifdef _TARGET_ */ /* * In Test mode B,if there is CRC error on the payload data the MS will, * where required by the USF, transmit the decoded payload data. The block * transmitted will be a valid uplink block format. */ if( ( (mac_data_ind->dl_data.block_status & 0x0100) EQ 0x0000) OR ( (grlc_data->testmode.mode EQ CGRLC_LOOP) ) ) { /* * Only successfully decoded blocks shall be considered */ if( gff_analyse_dl_data( mac_data_ind->fn, &( mac_data_ind->dl_data ) ) ) { /* * Only blocks intended for that MS shall be considered */ if( ber_ind.num_dl_blck < MAC_MAX_DL_DATA_BLCKS ) { ber_ind.be_info[ber_ind.num_dl_blck].total = BITS_PER_RADIO_BLOCK; if( ( mac_data_ind->dl_data.block_status & 0x000F ) EQ 0x0006 ) { /* * If CS4 is used, the MS is allowed to report RXQUAL = 7, * so just set the BER to 100% */ ber_ind.be_info[ber_ind.num_dl_blck].fault = BITS_PER_RADIO_BLOCK; } else { ber_ind.be_info[ber_ind.num_dl_blck].fault = grlc_data->func.mac_data_ind.dl_data.d_nerr; } ber_ind.num_dl_blck++; } else { TRACE_ERROR( "be_info overflow in gff_mac_data_ind" ); } } } else { TRACE_ERROR( "MAC_DATA_IND with bad CRC" ); TRACE_BINDUMP ( hCommGRLC, TC_USER5, cl_rlcmac_get_msg_name( D_MSG_TYPE_CRC_ERROR_c, RLC_MAC_ROUTE_DL ), mac_data_ind->dl_data.dl_block, MAX_L2_FRAME_SIZE ); /*lint !e569*/ /* grlc_data->nr_of_crc_errors++; */ } } if( ber_ind.num_dl_blck NEQ 0 ) { meas_sq_update( &ber_ind ); } } break; default: /*TRACE_ERROR( "MAC_DATA_IND unexpected" );*/ break; } /*call control of asyn part TARGET DEBUGGING*/ #if defined (_TARGET_) grlc_data->dl_cnt_asyn = grlc_data->dl_cnt_syn; #endif /* defined (_TARGET_) */ } /* gff_mac_data_ind() */ /* +------------------------------------------------------------------------------ | Function : gff_mac_ready_ind +------------------------------------------------------------------------------ | Description : Handles the primitive MAC_READY_IND | | Parameters : *mac_ready_ind - Ptr to primitive payload | +------------------------------------------------------------------------------ */ GLOBAL void gff_mac_ready_ind ( T_MAC_READY_IND * mac_ready_ind ) { TRACE_FUNCTION( "mac_ready_ind" ); /* * calculate the frame number from downlink call */ #ifdef _TARGET_ { ULONG current_dl_fn; ULONG last_dl_fn; ULONG last_ul_fn; ULONG current_ul_fn; BOOL trace_dl_gap = TRUE; current_dl_fn = grlc_data->func.mac_ready_ind.fn; last_dl_fn = grlc_data->last_dl_fn; last_ul_fn = grlc_data->last_ul_fn; grlc_data->func.mac_ready_ind.fn = grlc_data->ul_fn ; current_ul_fn = grlc_data->ul_fn; if(grlc_data->func.mac_ready_ind.last_poll_resp) { TRACE_EVENT_P5("POLL NOT SENT BY LAYER 1 fn=%ld last_poll_resp=0x%x np_fn=%ld,bs=%d,ind=%d" ,grlc_data->func.mac_ready_ind.fn ,grlc_data->func.mac_ready_ind.last_poll_resp ,grlc_data->next_poll_fn ,grlc_data->ul_poll_resp[0].block_status ,grlc_data->ul_poll_pos_index); } /* handle gaps*/ if ((grlc_data->next_poll_fn EQ 2) OR (grlc_data->next_poll_fn EQ 1)) { /* last poll is sent*/ grlc_data->func.mac_ready_ind.last_poll_resp = 0; /* no ul gap for poll */ } else if( grlc_data->ul_call_errors AND (grlc_data->ul_fn_errors[grlc_data->ul_call_errors-1] EQ grlc_data->next_poll_fn )) { trace_dl_gap = FALSE; TRACE_EVENT_P7("CALL ERR:c_dl_fn=%ld l_dl_fn=%ld c_ul_fn=%ld l_ul_fn=%ld callerr=%d err_fn=%ld lp_fn=%ld", current_dl_fn, last_dl_fn, current_ul_fn, last_ul_fn, grlc_data->ul_call_errors, grlc_data->ul_fn_errors[grlc_data->ul_call_errors-1], grlc_data->next_poll_fn); grlc_data->func.mac_ready_ind.last_poll_resp = 0xFF; grlc_data->next_poll_fn =2 ; } else if(current_ul_fn >= grlc_data->next_poll_fn) { trace_dl_gap = FALSE; TRACE_EVENT_P6("2UL GAP NO POLL:c_dl_fn=%ld l_dl_fn=%ld c_ul_fn=%ld l_ul_fn=%ld lpr=%d lp_fn=%ld", current_dl_fn, last_dl_fn, current_ul_fn, last_ul_fn, grlc_data->func.mac_ready_ind.last_poll_resp, grlc_data->next_poll_fn); grlc_data->func.mac_ready_ind.last_poll_resp = 0xFF; grlc_data->next_poll_fn =2 ; } else if((grlc_data->next_poll_fn > current_ul_fn) AND (current_ul_fn < 52)) /*fn overflow*/ { trace_dl_gap = FALSE; TRACE_EVENT_P6("3UL GAP NO POLL:c_dl_fn=%ld l_dl_fn=%ld c_ul_fn=%ld l_ul_fn=%ld lpr=%d lp_fn=%ld", current_dl_fn, last_dl_fn, current_ul_fn, last_ul_fn, grlc_data->func.mac_ready_ind.last_poll_resp, grlc_data->next_poll_fn); grlc_data->func.mac_ready_ind.last_poll_resp = 0xFF; grlc_data->next_poll_fn =2 ; } if( trace_dl_gap AND ( ( current_dl_fn - last_dl_fn ) > 5 ) AND ( grlc_data->dl_cnt_syn OR grlc_data->dl_fn_store[0] OR grlc_data->dl_fn_store[1] ) ) { TRACE_EVENT_P2( "DL GAP: c_dl_fn=%ld l_dl_fn=%ld", current_dl_fn, last_dl_fn ); } } #endif /* _TARGET_ */ #ifdef _SIMULATION_ { /* * copy received primitive to grlc_data->func.mac_ready_ind */ grlc_data->ul_fn = mac_ready_ind->fn; memcpy ( &(grlc_data->func.mac_ready_ind), mac_ready_ind, sizeof(T_MAC_READY_IND)); PFREE(mac_ready_ind); } #endif mac_ready_ind = &(grlc_data->func.mac_ready_ind); #ifdef _TARGET_ TRACE_MEMORY_PRIM ( hCommL1, hCommGRLC, MAC_READY_IND, mac_ready_ind, sizeof( T_MAC_READY_IND ) ); #endif /* #ifdef _TARGET_ */ /* * handle ta value */ gff_handle_continious_ta(); switch( GET_STATE(GFF) ) { case GFF_ACTIVE: if(grlc_data->tfi_change NEQ TFI_CHANGE_NULL) { grlc_activate_tfi(mac_ready_ind->fn); } grlc_data->ul_poll_pos_index = 0; if(grlc_data->gff.rlc_status EQ RLC_STATUS_BOTH) { sig_gff_ru_mac_ready_ind(mac_ready_ind); sig_gff_rd_mac_ready_ind(mac_ready_ind); } else if(grlc_data->gff.rlc_status EQ RLC_STATUS_UL) sig_gff_ru_mac_ready_ind(mac_ready_ind); else if(grlc_data->gff.rlc_status EQ RLC_STATUS_DL) sig_gff_rd_mac_ready_ind(mac_ready_ind); else { TRACE_ERROR("unknown rlc status: gff active but no tbf"); } break; #if defined REL99 AND defined TI_PS_FF_TBF_EST_PACCH case GFF_TWO_PHASE: grlc_data->ul_poll_pos_index = 0; sig_gff_tm_mac_ready_ind_two_phase(mac_ready_ind); break; #endif default: /*TRACE_ERROR( "MAC_READY_IND unexpected" );*/ break; } #if defined (_TARGET_) /*call control of asyn part*/ grlc_data->ul_cnt_asyn = grlc_data->ul_cnt_syn; #endif /* defined (_TARGET_) */ } /* gff_mac_ready_ind() */ /* +------------------------------------------------------------------------------ | Function : gff_l1test_call_mphp_power_control +------------------------------------------------------------------------------ | Description : Handles the primitive L1TEST_CALL_MPHP_POWER_CONTROL | | Parameters : *mphp_power_control - Ptr to primitive payload | +------------------------------------------------------------------------------ */ #ifdef _SIMULATION_ GLOBAL void gff_l1test_call_mphp_power_control ( T_L1TEST_CALL_MPHP_POWER_CONTROL *call_mphp_power_control ) { PALLOC( return_mphp_power_control, L1TEST_RETURN_MPHP_POWER_CONTROL ); maca_power_control( call_mphp_power_control->assignment_id, call_mphp_power_control->crc_error, call_mphp_power_control->bcch_level, call_mphp_power_control->radio_freq, call_mphp_power_control->burst_level, return_mphp_power_control->pch ); PSEND( hCommL1, return_mphp_power_control ); TRACE_FUNCTION( "gff_l1test_call_mphp_power_control" ); PFREE( call_mphp_power_control ); } /* gff_l1test_call_mphp_power_control() */ #endif /* #ifdef _SIMULATION_ */