FreeCalypso > hg > fc-magnetite

view src/ui3/mfw/mfw_BtipsMdg.c @ 600:8f50b202e81f

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
board preprocessor conditionals: prep for more FC hw in the future This change eliminates the CONFIG_TARGET_FCDEV3B preprocessor symbol and all preprocessor conditionals throughout the code base that tested for it, replacing them with CONFIG_TARGET_FCFAM or CONFIG_TARGET_FCMODEM. These new symbols are specified as follows: CONFIG_TARGET_FCFAM is intended to cover all hardware designs created by Mother Mychaela under the FreeCalypso trademark. This family will include modem products (repackagings of the FCDEV3B, possibly with RFFE or even RF transceiver changes), and also my desired FreeCalypso handset product. CONFIG_TARGET_FCMODEM is intended to cover all FreeCalypso modem products (which will be firmware-compatible with the FCDEV3B if they use TI Rita transceiver, or will require a different fw build if we switch to one of Silabs Aero transceivers), but not the handset product. Right now this CONFIG_TARGET_FCMODEM preprocessor symbol is used to conditionalize everything dealing with MCSI. At the present moment the future of FC hardware evolution is still unknown: it is not known whether we will ever have any beyond-FCDEV3B hardware at all (contingent on uncertain funding), and if we do produce further FC hardware designs, it is not known whether they will retain the same FIC modem core (triband), if we are going to have a quadband design that still retains the classic Rita transceiver, or if we are going to switch to Silabs Aero II or some other transceiver. If we produce a quadband modem that still uses Rita, it will run exactly the same fw as the FCDEV3B thanks to the way we define TSPACT signals for the RF_FAM=12 && CONFIG_TARGET_FCFAM combination, and the current fcdev3b build target will be renamed to fcmodem. OTOH, if that putative quadband modem will be Aero-based, then it will require a different fw build target, the fcdev3b target will stay as it is, and the two targets will both define CONFIG_TARGET_FCFAM and CONFIG_TARGET_FCMODEM, but will have different RF_FAM numbers. But no matter which way we are going to evolve, it is not right to have conditionals on CONFIG_TARGET_FCDEV3B in places like ACI, and the present change clears the way for future evolution.
author Mychaela Falconia <falcon@freecalypso.org>
date Mon, 01 Apr 2019 01:05:24 +0000
parents e8ddbb0837ed
children
line wrap: on
line source

/* =========================================================
*             Texas Instruments OMAP(TM) Platform Software
*  (c) Copyright Texas Instruments, Incorporated.  All Rights Reserved.
*
*  Use of this software is controlled by the terms and conditions found
*  in the license agreement under which this software has been supplied.
* ========================================================== */
/*
 $Project name: Basic Bluetooth MMI
 $Project code:
 $Module:   Bluetooth BMG MFW
 $File:       Mfw_Btips.c
 $Revision:   1.0
 $Author:   Texas Instruments
 $Date:       26/06/07

********************************************************************************

 Description:

    This module provides the BTIPS BMG APPlication functionality.

********************************************************************************
 $History: Mfw_Btips.c

  26/06/07 Sasken original version

 $End

*******************************************************************************/




/*******************************************************************************

                                Include files

*******************************************************************************/

#define ENTITY_MFW
/* includes */

#include <string.h>

#if defined (NEW_FRAME)

#include "typedefs.h"
#include "vsi.h"
#include "pei.h"
#include "custom.h"
#include "gsm.h"
#include "prim.h"

#else

#include "STDDEFS.H"
#include "custom.h"
#include "gsm.h"
#include "vsi.h"

#include "bttypes.h"
#include "sec.h"
#include "spp.h"
#include "osapi.h"
#include "debug.h"
#include "btl_mdg.h"

#endif

#ifdef FF_MMI_BTIPS_APP

/* Macro for sending events to UI - meanwhile, trace message to PCO Viewer */
extern int vsi_o_state_ttrace ( const char * const format, ... );
#define UI_DISPLAY(s) vsi_o_state_ttrace s

#include "bttypes.h"
#include "sec.h"
#include "spp.h"
#include "osapi.h"
#include "debug.h"
//#include "../lineparser.h"
#include "btl_mdg.h"
//#include "../app_main.h"


/********************************************************************************
 *
 * Constants
 *
 *******************************************************************************/

/* MDG Application states */
#define MDGA_SERVER_STATE_NONE			    (0)
#define MDGA_SERVER_STATE_ENABLED		    (1)
#define MDGA_SERVER_STATE_DISABLING		    (2)
#define MDGA_SERVER_STATE_DT_CONNECTED	    (3)
#define MDGA_SERVER_STATE_MODEM_CONNECTED	(4)
#define MDGA_SERVER_STATE_CONNECTED		    (5)

/* Security level of the MDG Application */
#define MDGA_SECURITY_LEVEL (BSL_AUTHENTICATION_IN | BSL_AUTHENTICATION_OUT)

/* Max number of Rx Sync packets - this value will be given to peer serial port
 * as amount of credits for RFCOMM credit based flow control */
#define MDGA_MAX_NUM_OF_RX_SYNC_PACKETS     (5)


/********************************************************************************
 *
 * Types
 *
 *******************************************************************************/

/* Structure to keep track of server information */
typedef struct
{
	U8                      state;
	const BtSecurityLevel   securityLevel;
	BtlMdgServerContext     *serverContext;
    BtlMdgServerSettings    serverSettings;
	SppLineStatus           lineStatus;
} MdgaServer;


/********************************************************************************
 *
 * Function prototypes
 *
 *******************************************************************************/
void mfw_btips_mdgInit(void);
void MDGA_Deinit(void);
void MDGA_Enable(U8 serverIndex);
void MDGA_Disable(U8 serverIndex);
void MDGA_GetSecurityLevel(U8 serverIndex);
void MDGA_SetSecurityLevel(U8 serverIndex, BtSecurityLevel *securityLevel);
void MDGA_GetComSettings(U8 serverIndex);
void MDGA_SetComSettings(U8 serverIndex, SppComSettings *comSettings);
void MDGA_GetConnectedDevice(U8 serverIndex);
void MDGA_TerminateDataCall(void);

void mfw_btips_mdgCallback(const BtlMdgCallbackParms *parms);
static const char *MdgaEventName(BtlMdgServerEvent mdgEvent);
static const char *MdgaStateName(int state);


/********************************************************************************
 *
 * Globals
 *
 *******************************************************************************/

static MdgaServer mdgaServers[] =
{
    {
     MDGA_SERVER_STATE_NONE, MDGA_SECURITY_LEVEL, NULL,
     {BTL_SPP_SERVICE_TYPE_DUN,
      "BTIPS DUN", 
      {SPP_SERVER_PORT,
       BTL_SPP_SERVICE_TYPE_DUN,
       SPP_PORT_DATA_PATH_TX_SYNC | SPP_PORT_DATA_PATH_RX_ASYNC,
       MDGA_MAX_NUM_OF_RX_SYNC_PACKETS,
       {SPP_COM_SETTING_BAUDRATE_DEFAULT,
	   SPP_COM_SETTING_DATA_FORMAT_DEFAULT,
        SPP_COM_SETTING_FLOW_CONTROL_DEFAULT,
	   SPP_COM_SETTING_XON_CHAR_DEFAULT,
	   SPP_COM_SETTING_XOFF_CHAR_DEFAULT,
        0
      }
     },
     },
     0
    }
};

#define MDGA_NUM_SERVERS (sizeof(mdgaServers) / sizeof(MdgaServer))


/********************************************************************************
 *
 * Function definitions
 *
 *******************************************************************************/

 /*-------------------------------------------------------------------------------
 * mfw_btips_mdgInit()
 *
 *		Initialize application module.
 *
 * Type:
 *		Synchronous.
 *
 * Parameters:
 *     	None.
 *
 * Returns:
 *		None.
 */
void mfw_btips_mdgInit()
{
    BtStatus status;
   	U32 idx;
    MdgaServer *server = &mdgaServers[0];

    Report(("mfw_btips_mdgInit"));

    /* Create and enable all MDG servers */
    for (idx=0; idx<MDGA_NUM_SERVERS; idx++, server++)
    {
        /* Create MDG server */
        status = BTL_MDG_Create(0,
                                mfw_btips_mdgCallback,
                                &server->securityLevel,
                                &server->serverContext);
        if (BT_STATUS_SUCCESS != status)
        {
	        Report(("MDGA: BTL_MDG_Create() failed for server %s, status %s",
                    server->serverSettings.serviceName,
                    pBT_Status(status)));
        }
        else
        {
            /* Enable MDG server */
            status = BTL_MDG_Enable(server->serverContext,
                                    &server->serverSettings);

            if (BT_STATUS_SUCCESS != status)
            {
	            Report(("MDGA: BTL_MDG_Enable() failed for server %s, status %s",
                        server->serverSettings.serviceName,
                        pBT_Status(status)));
            }
            else
            {
                server->state = MDGA_SERVER_STATE_ENABLED;
            }
        }
    }
}

/*-------------------------------------------------------------------------------
 * MDGA_Deinit()
 *
 *		Deinitialize application module.
 *
 * Type:
 *		Synchronous.
 *
 * Parameters:
 *     	None.
 *
 * Returns:
 *		None.
 */
void MDGA_Deinit()
{
    BtStatus status;
   	U32 idx;
    MdgaServer *server = &mdgaServers[0];

    Report(("MDGA_Deinit"));

    /* Disable and destroy all MDG servers */
    for (idx=0; idx<MDGA_NUM_SERVERS; idx++, server++)
    {
        /* Check whether the server was enabled and not in DISABLING state */
        if ((server->state >= MDGA_SERVER_STATE_ENABLED) &&
            (MDGA_SERVER_STATE_DISABLING != server->state))
        {
            /* Disable MDG server */
            status = BTL_MDG_Disable(server->serverContext);

            if (BT_STATUS_SUCCESS == status)
            {
                /* Destroy MDG server */
                status = BTL_MDG_Destroy(&server->serverContext);

                if (BT_STATUS_SUCCESS != status)
                {
                    Report(("MDGA: BTL_MDG_Destroy() failed for server %s, status %s",
                            server->serverSettings.serviceName,
                            pBT_Status(status)));
                }
                else
                {
                    server->state = MDGA_SERVER_STATE_NONE;
                }
            }
            else if ((BT_STATUS_PENDING == status) || (BT_STATUS_IN_PROGRESS == status))
            {
                /* Continue disabling server in mfw_btips_mdgCallback() */
                server->state = MDGA_SERVER_STATE_DISABLING;
            }
            else
            {
                Report(("MDGA: BTL_MDG_Disable() failed, status %s", pBT_Status(status)));
            }
        }
    }
}

/*-------------------------------------------------------------------------------
 * MDGA_Enable()
 *
 *		Processes command 'enable'.
 *
 * Type:
 *		Synchronous.
 *
 * Parameters:
 *     	serverIndex - index of the server.
 *
 * Returns:
 *		None.
 */
void MDGA_Enable(U8 serverIndex)
{
	BtStatus status;
   	MdgaServer *server;

   	server = &mdgaServers[serverIndex];

    /* Check validity of the command */
    if (server->state >= MDGA_SERVER_STATE_ENABLED)
    {
	    Report(("MDGA: server %s is already enabled",
                server->serverSettings.serviceName));
        return;
    }

    /* Create MDG server */
    status = BTL_MDG_Create(0,
                            mfw_btips_mdgCallback,
                            &server->securityLevel,
                            &server->serverContext);
    if (BT_STATUS_SUCCESS != status)
    {
        Report(("MDGA: BTL_MDG_Create() failed, status %s",
                pBT_Status(status)));
    }
    else
    {
        /* Enable MDG server */
        status = BTL_MDG_Enable(server->serverContext,
                                &server->serverSettings);

        if (BT_STATUS_SUCCESS != status)
        {
            Report(("MDGA: BTL_MDG_Enable() failed, status %s",
                    pBT_Status(status)));
        }
        else
        {
            server->state = MDGA_SERVER_STATE_ENABLED;
            UI_DISPLAY(("MDGA: server %s enabled",
                        server->serverSettings.serviceName));
        }
    }

    return;
}

/*-------------------------------------------------------------------------------
 * MDGA_Disable()
 *
 *		Processes command 'enable'.
 *
 * Type:
 *		Synchronous.
 *
 * Parameters:
 *     	serverIndex - index of the server.
 *
 * Returns:
 *		None.
 */
void MDGA_Disable(U8 serverIndex)
{
	BtStatus status;
   	MdgaServer *server = &mdgaServers[serverIndex];

    /* Check validity of the command */
    if (server->state < MDGA_SERVER_STATE_ENABLED)
    {
	    Report(("MDGA: server %s is not enabled",
                server->serverSettings.serviceName));
        return;
    }

    /* Disable MDG server */
    status = BTL_MDG_Disable(server->serverContext);

    if (BT_STATUS_SUCCESS == status)
    {
        /* Destroy MDG server */
        status = BTL_MDG_Destroy(&server->serverContext);

        if (BT_STATUS_SUCCESS != status)
        {
            Report(("MDGA: BTL_MDG_Destroy() failed, status %s",
                    pBT_Status(status)));
        }
        else
        {
            server->state = MDGA_SERVER_STATE_NONE;
	        UI_DISPLAY(("MDGA: server %s disabled",
                        server->serverSettings.serviceName));
        }
    }
    else if ((BT_STATUS_PENDING == status) || (BT_STATUS_IN_PROGRESS == status))
    {
        /* Continue disabling server in mfw_btips_mdgCallback() */
        server->state = MDGA_SERVER_STATE_DISABLING;
	    UI_DISPLAY(("MDGA: disabling server %s",
                    server->serverSettings.serviceName));
    }
    else
    {
        Report(("MDGA: BTL_MDG_Disable() failed, status %s", pBT_Status(status)));
    }

    return;
} 

/*-------------------------------------------------------------------------------
 * MDGA_GetSecurityLevel()
 *
 *		Processes command 'getsec'.
 *
 * Type:
 *		Synchronous.
 *
 * Parameters:
 *     	serverIndex - index of the server.
 *
 * Returns:
 *		None.
 */
void MDGA_GetSecurityLevel(U8 serverIndex)
{
	BtStatus status;
	BtSecurityLevel securityLevel;
   	MdgaServer *server = &mdgaServers[serverIndex];
 
	status = BTL_MDG_GetSecurityLevel(server->serverContext, &securityLevel);

	if (BT_STATUS_SUCCESS == status)
	{
		UI_DISPLAY(("UI_EVENT: MDGA got security level %d for server %s",
			        securityLevel,
			        server->serverSettings.serviceName));
	}
	else
	{
		Report(("MDGA: BTL_MDG_GetSecurityLevel() failed for server %s, status %s",
			     server->serverSettings.serviceName,
			     pBT_Status(status)));
	}

	return;
}

/*-------------------------------------------------------------------------------
 * MDGA_SetSecurityLevel()
 *
 *		Processes command 'setsec'.
 *
 * Type:
 *		Synchronous.
 *
 * Parameters:
 *     	serverIndex - index of the server.
 *
 * Returns:
 *		None.
 */
void MDGA_SetSecurityLevel(U8 serverIndex, BtSecurityLevel *securityLevel)
{
	BtStatus status;
   	MdgaServer *server = &mdgaServers[serverIndex];
 
	status = BTL_MDG_SetSecurityLevel(server->serverContext, securityLevel);

	if (BT_STATUS_SUCCESS == status)
	{
		UI_DISPLAY(("UI_EVENT: MDGA set security level %d for server %s",
			        *securityLevel,
			        server->serverSettings.serviceName));
	}
	else
	{
		Report(("MDGA: BTL_MDG_SetSecurityLevel() failed for server %s, status %s",
			     server->serverSettings.serviceName,
			     pBT_Status(status)));
	}

	return;
}

/*-------------------------------------------------------------------------------
 * MDGA_GetComSettings()
 *
 *		Processes command 'getcomset'.
 *
 * Type:
 *		Synchronous.
 *
 * Parameters:
 *     	serverIndex - index of the server.
 *
 * Returns:
 *		None.
 */
void MDGA_GetComSettings(U8 serverIndex)
{
	BtStatus status;
	SppComSettings comSettings;
   	MdgaServer *server = &mdgaServers[serverIndex];
 
	status = BTL_MDG_GetComSettings(server->serverContext, &comSettings);

	if (BT_STATUS_SUCCESS == status)
	{
		UI_DISPLAY(("UI_EVENT: MDGA got com settings for server %s -", server->serverSettings.serviceName));
		UI_DISPLAY(("UI_EVENT: MDGA baudrate 0x%02x, data format 0x%02x, flow control 0x%02x, XON 0x%02x, XOFF 0x%02x",
				    comSettings.baudRate,
				    comSettings.dataFormat,
				    comSettings.flowControl,
				    comSettings.xonChar,
				    comSettings.xoffChar));
	}
	else
	{
		Report(("MDGA: BTL_MDG_GetComSettings() failed for server %s, status %s",
			     server->serverSettings.serviceName,
			     pBT_Status(status)));
	}

	return;
}

/*-------------------------------------------------------------------------------
 * MDGA_SetComSettings()
 *
 *		Processes command 'setcomset'.
 *
 * Type:
 *		Synchronous.
 *
 * Parameters:
 *     	serverIndex - index of the server.
 *
 * Returns:
 *		None.
 */
void MDGA_SetComSettings(U8 serverIndex, SppComSettings *comSettings)
{
	BtStatus status;
   	MdgaServer *server = &mdgaServers[serverIndex];

	status = BTL_MDG_SetComSettings(server->serverContext, comSettings);

	if (BT_STATUS_SUCCESS == status)
	{
		UI_DISPLAY(("UI_EVENT: MDGA set com settings for server %s -", server->serverSettings.serviceName));
		UI_DISPLAY(("UI_EVENT: MDGA baudrate 0x%02x, data format 0x%02x, flow control 0x%02x, XON 0x%02x, XOFF 0x%02x, parm mask 0x%04x",
				    comSettings->baudRate,
				    comSettings->dataFormat,
				    comSettings->flowControl,
				    comSettings->xonChar,
				    comSettings->xoffChar,
				    comSettings->parmMask));
	}
	else if ((BT_STATUS_PENDING != status) && (BT_STATUS_IN_PROGRESS != status))
	{
		Report(("MDGA: BTL_MDG_GetComSettings() failed for server %s, status %s",
			     server->serverSettings.serviceName,
			     pBT_Status(status)));
	}

	return;
}

/*-------------------------------------------------------------------------------
 * MDGA_GetConnectedDevice()
 *
 *		Processes command 'getcondev'.
 *
 * Type:
 *		Synchronous.
 *
 * Parameters:
 *     	serverIndex - index of the server.
 *
 * Returns:
 *		None.
 */
void MDGA_GetConnectedDevice(U8 serverIndex)
{
	BtStatus status;
	BD_ADDR bdAddr;
	char addr[BDADDR_NTOA_SIZE];
   	MdgaServer *server = &mdgaServers[serverIndex];
 
	status = BTL_MDG_GetConnectedDevice(server->serverContext, &bdAddr);

	if (BT_STATUS_SUCCESS == status)
	{
		UI_DISPLAY(("UI_EVENT: MDGA server %s is connected to %s",
			       server->serverSettings.serviceName,
			       bdaddr_ntoa((const BD_ADDR *)&bdAddr, addr)));
	}
	else
	{
		Report(("MDGA: MdgaGetConnectedDevice() failed for server %s, status %s",
			     server->serverSettings.serviceName,
			     pBT_Status(status)));
	}

	return;
}

/*-------------------------------------------------------------------------------
 * MDGA_TerminateDataCall()
 *
 *		Processes command 'termdatacall'.
 *
 * Type:
 *		Synchronous.
 *
 * Parameters:
 *     	None.
 *
 * Returns:
 *		None.
 */
void MDGA_TerminateDataCall()
{
    return;
}

/*-------------------------------------------------------------------------------
 * mfw_btips_mdgCallback()
 *
 *		Callback function for receiving BTL MDG events.
 *
 * Type:
 *		Synchronous.
 *
 * Parameters:
 *     	parms - received event.
 *
 * Returns:
 *		None.
 */

void mfw_btips_mdgCallback(const BtlMdgCallbackParms *parms)
{
	BtStatus status;
    MdgaServer *server;
	int idx;

	TRACE_EVENT_P1("mfw_btips_mdgCallback - %d", parms->event);
	/* Find a server according to given BTL MDG context */
	for (idx = 0, server=&mdgaServers[0]; idx<MDGA_NUM_SERVERS; idx++, server++)
	{
		if (server->serverContext == parms->serverContext)
		{
			break;
		}
	}

	/* Check whether we found a port in array of clients */
	if (MDGA_NUM_SERVERS == idx)
	{

		/* Server is not found */
		Report(("MDGA: server's context is unknown"));
		return;
	}

	/* Display received event and server's service name */
	UI_DISPLAY(("UI_EVENT: MDGA received event %s for server %s",
                MdgaEventName(parms->event),
                server->serverSettings.serviceName));

	/* Change port's state according to event */
	switch(parms->event)
	{
		case BTL_MDG_SERVER_EVENT_ENABLED:
			server->state = MDGA_SERVER_STATE_ENABLED;
			break;

		case BTL_MDG_SERVER_EVENT_DISABLED:
            if (MDGA_SERVER_STATE_DISABLING == server->state)
            {
            /* Destroy MDG server */
            status = BTL_MDG_Destroy(&server->serverContext);

                if (BT_STATUS_SUCCESS != status)
                {
                    Report(("MDGA: BTL_MDG_Destroy() failed, status %s",
                            pBT_Status(status)));
                }
                else
                {
                    server->state = MDGA_SERVER_STATE_NONE;
	                UI_DISPLAY(("MDGA: server %s disabled",
                                server->serverSettings.serviceName));
                }
            }
            break;

		case BTL_MDG_SERVER_EVENT_DT_CONNECTED:
            if (MDGA_SERVER_STATE_MODEM_CONNECTED == server->state)
            {
			    server->state = MDGA_SERVER_STATE_CONNECTED;
            }
            else
            {
			    server->state = MDGA_SERVER_STATE_DT_CONNECTED;
            }
			break;

		case BTL_MDG_SERVER_EVENT_DT_DISCONNECTED:
            if (MDGA_SERVER_STATE_CONNECTED == server->state)
            {
			    server->state = MDGA_SERVER_STATE_MODEM_CONNECTED;
            }
            else if (MDGA_SERVER_STATE_DISABLING != server->state)
            {
			    server->state = MDGA_SERVER_STATE_ENABLED;
            }
			break;

		case BTL_MDG_SERVER_EVENT_MODEM_CONNECTED:
            if (MDGA_SERVER_STATE_DT_CONNECTED == server->state)
            {
			    server->state = MDGA_SERVER_STATE_CONNECTED;
            }
            else
            {
			    server->state = MDGA_SERVER_STATE_DT_CONNECTED;
            }
			break;

		case BTL_MDG_SERVER_EVENT_MODEM_DISCONNECTED:
            if (MDGA_SERVER_STATE_CONNECTED == server->state)
            {
			    server->state = MDGA_SERVER_STATE_DT_CONNECTED;
            }
            else if (MDGA_SERVER_STATE_DISABLING != server->state)
            {
			    server->state = MDGA_SERVER_STATE_ENABLED;
            }
			break;

		default:
			break;
	}

	/* Display server's new state */
	Report(("MDGA: %s server's state %s",
           server->serverSettings.serviceName,
           MdgaStateName(server->state)));
}

/*-------------------------------------------------------------------------------
 * MdgaEventName()
 *
 *		Gets event's name.
 *
 * Type:
 *		Synchronous.
 *
 * Parameters:
 *     	mdgEvent - event.
 *
 * Returns:
 *		String with event's name.
 */
static const char *MdgaEventName(BtlMdgServerEvent mdgEvent)
{
    switch (mdgEvent)
    {
        case BTL_MDG_SERVER_EVENT_INITIALIZED:
            return "BTL_MDG_SERVER_EVENT_INITIALIZED";

        case BTL_MDG_SERVER_EVENT_DEINITIALIZED:
            return "BTL_MDG_SERVER_EVENT_DEINITIALIZED";

        case BTL_MDG_SERVER_EVENT_ENABLED:
            return "BTL_MDG_SERVER_EVENT_ENABLED";

        case BTL_MDG_SERVER_EVENT_DISABLED:
            return "BTL_MDG_SERVER_EVENT_DISABLED";

        case BTL_MDG_SERVER_EVENT_DT_CONNECTED:
            return "BTL_MDG_SERVER_EVENT_DT_CONNECTED";

        case BTL_MDG_SERVER_EVENT_DT_DISCONNECTED:
            return "BTL_MDG_SERVER_EVENT_DT_DISCONNECTED";

        case BTL_MDG_SERVER_EVENT_MODEM_CONNECTED:
            return "BTL_MDG_SERVER_EVENT_MODEM_CONNECTED";

        case BTL_MDG_SERVER_EVENT_MODEM_DISCONNECTED:
            return "BTL_MDG_SERVER_EVENT_MODEM_DISCONNECTED";

        default:
            return "MDGA: server received unknown event";
    }
}

/*-------------------------------------------------------------------------------
 * MdgaStateName()
 *
 *		Gets state's name.
 *
 * Type:
 *		Synchronous.
 *
 * Parameters:
 *     	state - server's state.
 *
 * Returns:
 *		String with state's name.
 */
static const char *MdgaStateName(int state)
{
    switch (state)
    {
        case MDGA_SERVER_STATE_NONE:
            return "MDGA_SERVER_STATE_NONE";

        case MDGA_SERVER_STATE_ENABLED:
            return "MDGA_SERVER_STATE_ENABLED";

        case MDGA_SERVER_STATE_DISABLING:
            return "MDGA_SERVER_STATE_DISABLING";

        case MDGA_SERVER_STATE_DT_CONNECTED:
            return "MDGA_SERVER_STATE_DT_CONNECTED";

        case MDGA_SERVER_STATE_MODEM_CONNECTED:
            return "MDGA_SERVER_STATE_MODEM_CONNECTED";

        case MDGA_SERVER_STATE_CONNECTED:
            return "MDGA_SERVER_STATE_CONNECTED";

        default:
            return "MDG server unknown state";
    }
}

#endif