view src/ui3/mfw/mfw_edt.h @ 600:8f50b202e81f

board preprocessor conditionals: prep for more FC hw in the future This change eliminates the CONFIG_TARGET_FCDEV3B preprocessor symbol and all preprocessor conditionals throughout the code base that tested for it, replacing them with CONFIG_TARGET_FCFAM or CONFIG_TARGET_FCMODEM. These new symbols are specified as follows: CONFIG_TARGET_FCFAM is intended to cover all hardware designs created by Mother Mychaela under the FreeCalypso trademark. This family will include modem products (repackagings of the FCDEV3B, possibly with RFFE or even RF transceiver changes), and also my desired FreeCalypso handset product. CONFIG_TARGET_FCMODEM is intended to cover all FreeCalypso modem products (which will be firmware-compatible with the FCDEV3B if they use TI Rita transceiver, or will require a different fw build if we switch to one of Silabs Aero transceivers), but not the handset product. Right now this CONFIG_TARGET_FCMODEM preprocessor symbol is used to conditionalize everything dealing with MCSI. At the present moment the future of FC hardware evolution is still unknown: it is not known whether we will ever have any beyond-FCDEV3B hardware at all (contingent on uncertain funding), and if we do produce further FC hardware designs, it is not known whether they will retain the same FIC modem core (triband), if we are going to have a quadband design that still retains the classic Rita transceiver, or if we are going to switch to Silabs Aero II or some other transceiver. If we produce a quadband modem that still uses Rita, it will run exactly the same fw as the FCDEV3B thanks to the way we define TSPACT signals for the RF_FAM=12 && CONFIG_TARGET_FCFAM combination, and the current fcdev3b build target will be renamed to fcmodem. OTOH, if that putative quadband modem will be Aero-based, then it will require a different fw build target, the fcdev3b target will stay as it is, and the two targets will both define CONFIG_TARGET_FCFAM and CONFIG_TARGET_FCMODEM, but will have different RF_FAM numbers. But no matter which way we are going to evolve, it is not right to have conditionals on CONFIG_TARGET_FCDEV3B in places like ACI, and the present change clears the way for future evolution.
author Mychaela Falconia <falcon@freecalypso.org>
date Mon, 01 Apr 2019 01:05:24 +0000
parents e8ddbb0837ed
children
line wrap: on
line source

/*
+--------------------------------------------------------------------+
| PROJECT: MMI-Framework (8417)         $Workfile:: mfw_edt.h       $|
| $Author:: Es  $ CONDAT GmbH           $Revision:: 7               $|
| CREATED: 21.09.98                     $Modtime:: 23.03.00 8:23    $|
| STATE  : code                                                      |
+--------------------------------------------------------------------+

   MODULE  : MFW_EDT

   PURPOSE : EDIT types & constants

   EXPORT  :

   TO DO   :

   $History:: mfw_edt.h                                             $
 * 
  *  * *****************  Version 8  *****************
 * User: MC           Date: 03/10/02	   Time: 14:40
 * Updated in $/GSM/Condat/MS/SRC/MFW
 * Replaced most of the file with version on 3.3.3 line (MC, SPR 1242)
 * 
 * *****************  Version 7  *****************
 * User: Es           Date: 23.03.00   Time: 14:40
 * Updated in $/GSM/Condat/MS/SRC/MFW
 * added edtUnhide()
 * 
 * *****************  Version 6  *****************
 * User: Es           Date: 18.02.00   Time: 15:45
 * Updated in $/GSM/Condat/MS/SRC/MFW
 * added edit controls: ecTop, ecBottom
 * 
 * *****************  Version 5  *****************
 * User: Es           Date: 6.07.99    Time: 12:03
 * Updated in $/GSM/DEV/MS/SRC/MFW
 * 
 * *****************  Version 4  *****************
 * User: Es           Date: 17.02.99   Time: 20:00
 * Updated in $/GSM/DEV/MS/SRC/MFW
 * 
 * *****************  Version 3  *****************
 * User: Es           Date: 14.01.99   Time: 17:19
 * Updated in $/GSM/DEV/MS/SRC/MFW
 * 
 * *****************  Version 2  *****************
 * User: Es           Date: 23.12.98   Time: 16:19
 * Updated in $/GSM/DEV/MS/SRC/MFW
*/

#ifndef _DEF_MFW_EDT_H_
#define _DEF_MFW_EDT_H_

#define edtCurNone      0x00            /* no cursor, read only     */
#define edtCurBar1      0x01            /* vertical bar thin        */
#define edtCurMask      0x07            /* mask for cursor type     */
#define edtModOverWr    0x08            /* overwrite mode           */
#define edtModWordSkip  0x10            /* GW 12/09/01 skip over words (for predictive text)  */
#define edtModAllowPredText 0x20		/* SPR957 - SH - whether predicted text is available in this editor */

#define MAX_PRED_TEXT   15

//GW Added bgd colour - and changed type to U32 (for future compatibility)
typedef struct MfwEdtAttrTag            /* EDITOR ATTRIBUTES        */
{
    MfwRect win;                        /* editor position and size */
    U32 edtCol;							/* index to fgd/bgd colour definition*/
    U8 font;                            /* character font           */
    U8 mode;                            /* edit modes & cursor type */
    U8 *controls;                       /* edit control keys        */
    char *text;                         /* edit buffer              */
    U16 size;                           /* buffer size              */
	char predText[MAX_PRED_TEXT];		/* GW 06/09/01 Added predicted word buffer    */
    
/* NM, 13.03, fast-edit 
   old:  to handle between the two modes (digit/alpha) was done by BMI
   new: handle by MFW
*/     
    U8 alphaMode;   					/* true(alpha)/false(digit) */                
} MfwEdtAttr;

typedef struct MfwEdtTag                /* EDITOR CONTROL BLOCK     */
{
    MfwEvt mask;                        /* selection of events      */
    MfwEvt flags;                       /* current event            */
    MfwCb handler;                      /* event handler            */
    MfwEdtAttr *attr;                   /* editor attributes        */
    U16 cp;                             /* cursor position          */
    U16 curOffs;                        /* start of view in text    */
	/* SPR920 - NH (SH) - these properties are now kept by the editor */
    int fontHeight;                  /* height of current font   */
    int display;                     /* really show the things   */
    U8 curMode;                      /* edit mode & cursor type  */
    S16 curCX, curCY;                /* screen cursor position   */
    S16 curCSize;					/* size of screen cursor    */
    /* end SPR920 */
} MfwEdt;

typedef enum                            /* EDITOR CONTROL KEYS      */
{
    ecNone,                             /* no valid edit control    */
    ecLeft,                             /* cursor left              */
    ecRight,                            /* cursor right             */
    ecUp,                               /* cursor up                */
    ecDown,                             /* cursor down              */
    ecTop,                              /* cursor to top of text    */
    ecBottom,                           /* cursor to end of text    */
    ecBack,                             /* backspace                */
    ecDel,                              /* delete                   */
    ecEnter,                            /* return key               */
    ecEscape                            /* escape key               */
} MfwEdtEC;

                                        /* EDITOR FLAGS             */
#define MfwEdtVisible       1           /* editor is visible        */


                                        /* PROTOTYPES               */
MfwRes edtInit (void);
MfwRes edtExit (void);
MfwHnd edtCreate (MfwHnd w, MfwEdtAttr *a, MfwEvt e, MfwCb f);
MfwRes edtDelete (MfwHnd e);
MfwRes edtReset (MfwHnd w);
MfwRes edtShow (MfwHnd e);
MfwRes edtHide (MfwHnd e);
MfwRes edtUnhide (MfwHnd e);
MfwRes edtClear (MfwHnd e);
MfwRes edtUpdate (MfwEdt *e);
MfwRes edtChar (MfwHnd e, int c);

MfwRes edtRefresh (MfwHnd e); /* SPR945 - SH*/

//Global procedures - Adding/ removing words in the editor.
MfwRes edtInsertString (MfwHnd e, char* insWord);		//Insert a string at the cursor
MfwRes edtCopyString (MfwHnd e, char* removeWord);		//Copy a word from the cursor pos
MfwRes edtRemoveString (MfwHnd e, char* removeWord);	//Delete a word from the cursor pos.

char getCursorChar(MfwHnd e, int offset );
void moveRight (char *b, int s, int d);
void moveLeft (char * str, int ofs);

/* Unicode editor procedures.
 * SPR957 - SH - moved some prototypes here from mfw_edt.c */
 
MfwRes	edtUpdateUnicode (MfwEdt *e);
MfwRes	edtCharUnicode (MfwHnd e, int c);
void	moveLeftUnicode(U16 *unicodeStr, int nChars);
void	moveRightUnicode(U16 *unicodeStr, int nChars);/*MC*/
U16		strlenUnicode(U16* str);/*MC*/
int		edtInsertUnicode (MfwEdt *e, int c, U16 *b, int s);
MfwRes	edtInsertUnicodeString (MfwHnd e, char* insWordChar);
void	convertToUnicode(U16 *outputString, char *inputString); /* SPR957 - SH - added */


#endif