FreeCalypso > hg > fc-magnetite
view src/g23m-gsm/rr/cus_rr.h @ 473:90c960bce343
flash-boot-mode0.patch moved to fcdev3b-hacks
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Sun, 25 Mar 2018 06:02:12 +0000 |
parents | 27a4235405c6 |
children |
line wrap: on
line source
/* +----------------------------------------------------------------------------- | Project : | Modul : +----------------------------------------------------------------------------- | Copyright 2002 Texas Instruments Berlin, AG | All rights reserved. | | This file is confidential and a trade secret of Texas | Instruments Berlin, AG | The receipt of or possession of this file does not convey | any rights to reproduce or disclose its contents or to | manufacture, use, or sell anything it may describe, in | whole, or in part, without the specific written consent of | Texas Instruments Berlin, AG. +----------------------------------------------------------------------------- | Purpose : Custom dependent definitions for RR of the | mobile station +----------------------------------------------------------------------------- */ #ifndef CUS_RR_H #define CUS_RR_H /*==== CONSTANTS ==================================================*/ /* * TIMER_VALUES * * Description : The constants define the timer values * for the RR timer TXXX depending on the various * channel types and service access point identifiers. * If your target system uses other units please * change the values. */ /* * all values in milliseconds independent from the target */ #define TRESELECT_VALUE 10000 #define TABORT_VALUE 10000 #define T3110_VALUE 500 #define T3110_SDCCH_VALUE 900 #define T3126_VALUE 2500 #define T3122_VALUE(a) (1000*(a)) #define T_PLMN_SEARCH_VALUE 60000 /* CSI-LLD section:4.1.3.2 * Search mode timer values in seconds */ #define TFAST_CS_VALUE 240000 #define TNORMAL_CS_VALUE 240000 #define ONE_SEC 1000 #define TEN_SEC 10000 #define TWENTY_SEC 20000 #define THIRTY_SEC 30000 #define SIXTY_SEC 60000 #define TWO_MIN 120000 #define SIX_MIN 360000 #ifdef TI_PS_FF_AT_P_CMD_CTREG #define T_TEN_SEC 1 #define T_TWENTY_SEC 2 #define T_THIRTY_SEC 3 #define T_SIXTY_SEC 6 #define T_TWO_MIN 12 #define T_SIX_MIN 36 #endif /* TI_PS_FF_AT_P_CMD_CTREG */ /* * TIMER IDENTIFIER * * Description : The constants define the identifier of the * timer resources of RR. */ #define FOUR_FRAMES 4 #define T3110_NAME "T3110" #define T3122_NAME "T3122" #define T3126_NAME "T3126" #define TRESELECT_NAME "TRESELECT" #define TREG_NAME "TREG" #define TABORT_NAME "TABORT" /* * MAX_RR_TIMER * * Description : The constant define the number of timer * available in the timer pool. */ #define MAX_RR_TIMER 6 /* * PERIODS OF MEASUREMENT REPORTS * * Description : The constants defines the time between * measurement reports in idle or dedicated * mode as a multiple of 480 ms. */ #define PERIODS_OF_480MS_DEDICATED 1 #define PERIODS_OF_480MS_IDLE 2 /* * MEDIUM_RXLEV_THRESHOLD * * Description : The constant defines the RxLev threshold for reasonably * strong carriers */ #define MEDIUM_RXLEV_THRESHOLD 10 /* * UPPER_RXLEV_THRESHOLD * * Description : The constant defines the Upper RxLev threshold for * strong carriers */ #define UPPER_RXLEV_THRESHOLD 20 /* * MAX_LAI * * Description : The constant defines the length of the forbidden * LAI list. */ #define MAX_LAI 10 /* * MAX_RR_STORED_PRIM * * Description : The constant defines the number of primitives stored * in radio resource in parallel. */ /* * DG 1.8.2000 * #define MAX_RR_STORED_PRIM 5 * Forum G23M-0087, more than 5 prims to store */ #define MAX_RR_STORED_PRIM 10 /* * FRAME_OFFSET_ZERO * * Description : If the system ensures that the frame offset * for RR message is 24 bits, that means DL * start at offset zero, this option can be used * for an optimized access to the SDU. */ #undef FRAME_OFFSET_ZERO /* * C1 OFFSET * * Description : If no test sim card is inserted, this offset * is added to the calculated c1 value. This * ensures coverage for mobiles with a RF * at the lower border of sensitivity. */ #define C1_OFFSET 4 /* * DELAY BEFORE RESET IN CASE NO CONFIGURATION DATA AVAILABLE * * Description : At system start the software tries to read configuration * data from the flash [file system (FFS)] to allow behaviour * fitting to a customer's configuration, e.g. in terms of * HW suport (supported frequency bands, power class etc...) * If no such data can be found the system will reset after * the dalay specified below (unit is milliseconds). A customer * might use this time to download the configuration to the * flash. * Introduced with ConQuest Issue 7510, project G23M. */ #define DELAY_RESET_NO_CONFIG_DATA 30000 /* * DELAY BETWEEN NON PARALLEL SEARCH IN LIMITED SERVICE IN ALL FREQ AREA * * Description : When MS enters Limited Service in all freqqurncy are, * Non Parallel search must be used to get back to Full Service. * The following constant identifies the time gap between Non * Parallel search attempts in such a situation following TREG * timer expiry. This time gap is used to allow time for emegency * calls to the user. */ #define DELAY_NON_PAR_SEARCH_LIM_SER TWO_MIN /* * VSI_CALLER * * Description : For multithread applications the constant VSI_CALLER * must be defined to identify the calling thread of the * VSI-Interface. This must be done correponding to the * type of T_VSI_CALLER in VSI.H. The comma symbol is * neccessary because the vsi-functions are called * like this vsi_xxx (VSI_CALLER par2, par3 ...) */ #ifdef OPTION_MULTITHREAD #define VSI_CALLER rr_handle, #define VSI_CALLER_SINGLE rr_handle #else #define VSI_CALLER #define VSI_CALLER_SINGLE #endif #endif