view cdg3/cdginc-locosto/p_dio.val @ 677:91d9f8506420

GPIO046 dummy outputs on FCDEV3B, GTA0x and Tango
author Mychaela Falconia <falcon@freecalypso.org>
date Sat, 20 Jun 2020 04:32:45 +0000
parents c15047b3d00d
children
line wrap: on
line source

/*
+--------------------------------------------------------------------------+
| PROJECT : PROTOCOL STACK                                                 |
| FILE    : p_dio.val                                                      |
| SOURCE  : "sap\dio.pdf"                                                  |
| LastModified : "2004-03-19"                                              |
| IdAndVersion : "..."                                                     |
| SrcFileTime  : "Thu Nov 29 09:39:48 2007"                                |
| Generated by CCDGEN_2.5.5A on Thu Sep 25 09:18:53 2014                   |
|           !!DO NOT MODIFY!!DO NOT MODIFY!!DO NOT MODIFY!!                |
+--------------------------------------------------------------------------+
*/

/* PRAGMAS
 * PREFIX                 : NONE
 * COMPATIBILITY_DEFINES  : NO (require PREFIX)
 * ALWAYS_ENUM_IN_VAL_FILE: NO
 * ENABLE_GROUP: NO
 * CAPITALIZE_TYPENAME: NO
 */


#ifndef P_DIO_VAL
#define P_DIO_VAL


#define CDG_ENTER__P_DIO_VAL

#define CDG_ENTER__FILENAME _P_DIO_VAL
#define CDG_ENTER__P_DIO_VAL__FILE_TYPE CDGINC
#define CDG_ENTER__P_DIO_VAL__LAST_MODIFIED _2004_03_19
#define CDG_ENTER__P_DIO_VAL__ID_AND_VERSION _

#define CDG_ENTER__P_DIO_VAL__SRC_FILE_TIME _Thu_Nov_29_09_39_48_2007

#include "CDG_ENTER.h"

#undef CDG_ENTER__P_DIO_VAL

#undef CDG_ENTER__FILENAME


/*
 * Value constants for VAL_baud_rate
 */
#define DIO4_BAUD_RESERVED             (0x0)      /* reserved value                 */
#define DIO4_BAUD_AUTO                 (0x1)      /* Automatic detected             */
#define DIO4_BAUD_75                   (0x2)      /* Transmission rate of 75 bits/sec */
#define DIO4_BAUD_110                  (0x4)      /* Transmission rate of 110 bits/sec */
#define DIO4_BAUD_150                  (0x8)      /* Transmission rate of 150 bits/sec */
#define DIO4_BAUD_300                  (0x10)     /* Transmission rate of 300 bits/sec */
#define DIO4_BAUD_600                  (0x20)     /* Transmission rate of 600 bits/sec */
#define DIO4_BAUD_1200                 (0x40)     /* Transmission rate of 1200 bits/sec */
#define DIO4_BAUD_2400                 (0x80)     /* Transmission rate of 2400 bits/sec */
#define DIO4_BAUD_4800                 (0x100)    /* Transmission rate of 4800 bits/sec */
#define DIO4_BAUD_7200                 (0x200)    /* Transmission rate of 7200 bits/sec */
#define DIO4_BAUD_9600                 (0x400)    /* Transmission rate of 9600 bits/sec */
#define DIO4_BAUD_14400                (0x800)    /* Transmission rate of 14400 bits/sec */
#define DIO4_BAUD_19200                (0x1000)   /* Transmission rate of 19200 bits/se */
#define DIO4_BAUD_28800                (0x2000)   /* Transmission rate of 28800 bits/se */
#define DIO4_BAUD_33900                (0x4000)   /* Transmission rate of 33900 bits/se */
#define DIO4_BAUD_38400                (0x8000)   /* Transmission rate of 38400 bits/se */
#define DIO4_BAUD_57600                (0x10000)  /* Transmission rate of 57600 bits/se */
#define DIO4_BAUD_115200               (0x20000)  /* Transmission rate of 115200 bits/se */
#define DIO4_BAUD_203125               (0x40000)  /* Transmission rate of 203125 bits/se */
#define DIO4_BAUD_230400               (0x80000)  /* Transmission rate of 230400 bits/se */
#define DIO4_BAUD_406250               (0x100000) /* Transmission rate of 406250 bits/se */
#define DIO4_BAUD_460800               (0x200000) /* Transmission rate of460800 bits/se */
#define DIO4_BAUD_812500               (0x400000) /* Transmission rate of 812500 bits/se */
#define DIO4_BAUD_921600               (0x800000) /* Transmission rate of 921600 bits/se */

/*
 * Value constants for VAL_dev_type
 */
#define DIO_DATA_MUX                   (0x200000) /* device can start a multiplexer */
#define DIO_DATA_PKT                   (0x400000) /* device can contain packet data */
#define DIO_DATA_SER                   (0x800000) /* device can contain serial data */
#define DIO_DATA_SER_MUX               (0xa0000)  /* serial device which can start a multiplexer */
#define DIO_TYPE_ID_MASK               (0xff00)   /* mask for dio identifier to separate different capability structs with the same combination */
#define DIO_TYPE_DAT_MASK              (0xff0000) /* mask for dio identifier to separate kind of data support */
#define DIO_TYPE_SER                   (0x800100) /* Type for serial devices like UART */
#define DIO_TYPE_SER_MUX               (0xa00100) /* Type for serial devices like UART. It is possible to start a 27.010 multiplexer on devices of this type */
#define DIO_TYPE_PKT                   (0x400100) /* Type for packet devices        */

/*
 * Value constants for VAL_char_frame
 */
#define DIO_CF_8N2                     (0x1)      /* 8 data bits; no parity bit; 2 stop bits */
#define DIO_CF_8O1                     (0x2)      /* 8 data bits; odd parity bit; 1 stop bits */
#define DIO_CF_8E1                     (0x4)      /* 8 data bits; even parity bit; 1 stop bits */
#define DIO_CF_8M1                     (0x8)      /* 8 data bits; mark parity bit; 1 stop bits */
#define DIO_CF_8S1                     (0x10)     /* 8 data bits; space parity bit; 1 stop bits */
#define DIO_CF_8N1                     (0x20)     /* 8 data bits; no parity bit; 1 stop bits */
#define DIO_CF_7N2                     (0x40)     /* 7 data bits; no parity bit; 2 stop bits */
#define DIO_CF_7O1                     (0x80)     /* 7 data bits; odd parity bit; 1 stop bits */
#define DIO_CF_7E1                     (0x100)    /* 7 data bits; even parity bit; 1 stop bits */
#define DIO_CF_7M1                     (0x200)    /* 7 data bits; mark parity bit; 1 stop bits */
#define DIO_CF_7S1                     (0x400)    /* 7 data bits; space  parity bit;1 stop bits */
#define DIO_CF_7N1                     (0x800)    /* 7 data bits; no parity bit; 1 stop bits */

/*
 * Value constants for VAL_flow_control
 */
#define DIO_FLOW_NONE                  (0x1)      /* Data transmit: None   Data receive: None */
#define DIO_FLOW_NO_XOFF               (0x2)      /* Data transmit: None    Data receive: XON/XOFF */
#define DIO_FLOW_NO_CTS                (0x4)      /* Data transmit: None   Data receive: CTS */
#define DIO_FLOW_XON_NO                (0x8)      /* Data transmit:  local XON/XOFF Data receive: None */
#define DIO_FLOW_XON_XOFF              (0x10)     /* Data transmit:  local XON/XOFF Data receive: XON/XOFF */
#define DIO_FLOW_XON_CTS               (0x20)     /* Data transmit:  local XON/XOFF Data receive:CTS */
#define DIO_FLOW_RTS_NO                (0x40)     /* Data transmit: RTS  Data receive: None */
#define DIO_FLOW_RTS_XOFF              (0x80)     /* Data transmit: RTS  Data receive: XON/XOFF */
#define DIO_FLOW_RTS_CTS               (0x100)    /* Data transmit: RTS  Data receive: CTS */
#define DIO_FLOW_XTR_NO                (0x200)    /* Data transmit: transparent XON/XOFF  Data receive: None */
#define DIO_FLOW_XTR_XOFF              (0x400)    /* Data transmit: transparent XON/XOFF Data receive: CTS */
#define DIO_FLOW_XTR_CTS               (0x800)    /* Data transmit: transparent XON/XOFF Data receive: CTS */

/*
 * Value constants for VAL_line_states
 */
#define LINE_STD_DCD_ON                (0x1)      /* b00000001 set line DCD on      */
#define LINE_STD_DCD_OFF               (0x2)      /* b00000010 set line DCD off     */
#define LINE_STD_RING_ON               (0x4)      /* b00000100 set line RING on     */
#define LINE_STD_RING_OFF              (0x8)      /* b00001000 set line RING off    */
#define LINE_STD_ESCD_IND              (0x10)     /* b00010000 escape sequence indication */
#define LINE_STD_DTR_LDR               (0x20)     /* b00100000 DTR line drop indication */

/*
 * Value constants for VAL_ser_flags
 */
#define DIO_FLAG_SER_ESC               (0x80000000)/* device supports escape sequence detection */

/*
 * Value constants for VAL_device
 */
#define DIO_DRV_MASK                   (0xff000000)/* mask for driver number to identify the driver */
#define DIO_TYPE_MASK                  (0xffff00) /* mask for device type           */
#define DIO_DEVICE_MASK                (0xff)     /* mask for actual device number chosen by the driver */
#define DIO_DRV_UART                   (0x0)      /* UART driver                    */
#define DIO_DRV_USB                    (0x1000000)/* USB driver                     */
#define DIO_DRV_MUX                    (0x2000000)/* 27.010 multiplexer driver      */
#define DIO_DRV_PKT                    (0x3000000)/* packet driver                  */
#define DIO_DRV_MCBSP                  (0x4000000)/* McBSP driver                   */
#define DIO_DRV_APP                    (0x5000000)/* Application adapter            */
#define DIO_DRV_BAT                    (0x6000000)/* Binary Interface Adapter       */

/*
 * Value constants for VAL_dev_flag
 */
#define DIO_FLAG_SLEEP                 (0x80000000)/* device provides the feature power saving state */

/*
 * Value constants for VAL_mux_mode
 */
#define DIO_MUX_BASIC                  (0x1)      /* mux supports Basic option      */
#define DIO_MUX_UIH                    (0x2)      /* mux supports Advanced option with UIH frames */
#define DIO_MUX_UI                     (0x4)      /* mux supports Advanced option with UI frames */
#define DIO_MUX_I                      (0x8)      /* mux supports Advanced option with I frames (error recovery) */

/*
 * Value constants for VAL_contr_type
 */
#define DIO4_CTRL_LINES                (0x1)      /* control struct contains serial line states */
#define DIO4_CTRL_MUX                  (0x2)      /* control struct contains mux control parameter */

/*
 * Value constants for VAL_dev_mode
 */
#define DIO_MODE_SER                   (0x1)      /* device acts as serial  device  */
#define DIO_MODE_MUX                   (0x2)      /* device acts as 27.010 mux device */

/*
 * Value constants for VAL_esc_char
 */
#define ESC_CHAR_DEFAULT               (0x2b)     /* default escape character ('+') */

/*
 * Value constants for VAL_guard_per
 */
#define DIO_ESC_OFF                    (0x0)      /* turn escape sequence detection off */
#define DIO_GUARD_PER_DEFAULT          (0x3e8)    /* default value 1000ms           */

/*
 * Value constants for VAL_k
 */
#define K_DEFAULT                      (0x2)      /* k default value                */

/*
 * Value constants for VAL_n1
 */
#define MUX_N1_BASIC_DEFAULT           (0x1f)     /* default value for the basic option */
#define MUX_N1_ADVANCED_DEFAULT        (0x40)     /* default value for the advanced option */

/*
 * Value constants for VAL_n2
 */
#define MUX_N2_DEFAULT                 (0x3)      /* default number of retransmission */

/*
 * Value constants for VAL_sleep_mode
 */
#define DIO_SLEEP_ENABLE               (0x1)      /* enter sleep mode if possible   */
#define DIO_SLEEP_DISABLE              (0x2)      /* do not enter sleep mode        */

/*
 * Value constants for VAL_cb_line_state
 */
#define DIO_SA                         (0x80000000)/* read/write: device ready       */
#define DIO_SB                         (0x40000000)/* read/write: data valid         */
#define DIO_X                          (0x20000000)/* read/write: flow control       */
#define DIO_RING                       (0x10000000)/* write: RING indicator          */
#define DIO_ESC                        (0x8000000)/* read: escape seqence detected  */
#define DIO_MUX_STOPPED                (0x4000000)/* multiplexer stopped            */
#define DIO_BRK                        (0x2000000)/* read/write: break received/to be send */
#define DIO_BRKLEN_MASK                (0xff)     /* read/write: length of break signal in character; only valid if DIO_BREAK bit is set to 1 */

/*
 * Value constants for VAL_t1
 */
#define MUX_T1_DEFAULT                 (0xa)      /* default acknowledgement  timer (100ms) */

/*
 * Value constants for VAL_t2
 */
#define MUX_T2_DEFAULT                 (0x1e)     /* default response timer         */

/*
 * Value constants for VAL_t3
 */
#define MUX_T3_DEFAULT                 (0xa)      /* default wake up response timer (100ms) */

/*
 * Value constants for VAL_xoff
 */
#define XOFF_DEFAULT                   (0x13)     /* xoff default value             */

/*
 * Value constants for VAL_xon
 */
#define XON_DEFAULT                    (0x11)     /* xon default value              */

/*
 * Value constants for VAL_start_mux
 */
#define DIO_MUX_DYNAMIC                (0x0)      /* Do not start the 27.010 multiplexer immediately. The multi-plexer may be started dynamically on runtime */
#define DIO_MUX_START                  (0x1)      /* Starts the 27.010 multiplexer permanently. The multiplexer can not be turned off during runtime */

#include "CDG_LEAVE.h"


#endif