FreeCalypso > hg > fc-magnetite
view src/cs/layer1/p_include/l1p_cons.h @ 0:945cf7f506b2
src/cs: chipsetsw import from tcs211-fcmodem
binary blobs and LCD demo files have been excluded,
all line endings are LF only
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Sun, 25 Sep 2016 22:50:11 +0000 |
parents | |
children |
line wrap: on
line source
/************* Revision Controle System Header ************* * GSM Layer 1 software * L1P_CONS.H * * Filename l1p_cons.h * Copyright 2003 (C) Texas Instruments * ************* Revision Controle System Header *************/ // TBF allocations... #define DL_TBF 0 #define UL_TBF 1 #define BOTH_TBF 2 #define SINGLE_BLOCK_DL 3 #define SINGLE_BLOCK_UL 4 #define TWO_PHASE_ACCESS 5 #define NO_TBF 6 // MAC modes... #define DYN_ALLOC 0 #define EXT_DYN_ALLOC 1 #define FIX_ALLOC_NO_HALF 2 #define FIX_ALLOC_HALF 3 // First task after the Idle frame... #define RX_TASK 1 #define TX_TASK 2 // Status for interference measurement frame #define ANY_IDLE_FRAME 0 #define PTCCH_FRAME 1 #define SEARCH_FRAME 2 // No measurement status #define NO_MEAS 0x80 // Multislot bit of BBCTRL ABB register to set the multislot mode #if (ANLG_FAM == 1) #define B_MSLOT (0x40<<6) #endif #if ((ANLG_FAM == 2) || (ANLG_FAM == 3)) #define B_MSLOT (0x20<<6) #endif //---------------------------------------- // LAYER 1 Asynchronous processes names... //---------------------------------------- #define NBR_L1PA_PROCESSES 11 #define PI_SCP 0 // l1pa_idle_paging_process(msg) #define TRANSFER 1 // l1pa_transfer_process(msg) #define P_ACC 2 // l1pa_access_process(msg) #define P_POLL 3 // l1pa_idle_packet_polling_process(msg) #define SCPB 4 // l1pa_serving_cell_pbcch_read_process(msg) #define CR_MEAS 5 // l1pa_cr_meas_process(msg) #define TCR_MEAS 6 // l1pa_tcr_meas_process(msg) #define PI_INT_MEAS 7 // l1pa_idle_interference_meas_process(msg) #define PT_INT_MEAS 8 // l1pa_transfer_interference_meas_process(msg) #define NCPB 9 // l1pa_neighbor_cell_pbcch_read_process(msg) #define PI_SMSCB 10 // l1pa_idle_smscb_process(msg) // Constants for PRACH #define ACC_BURST_8 0 #define ACC_BURST_11 1 #define DYN_PRACH_ALLOC 1 #define FIX_PRACH_ALLOC 2 // DSP CS types (CHED) //TABLE/ UL CS #define CS_NONE_TYPE 0 //NAME/ No block #define CS_AUTO_DETECT 1 //NAME/ N/A #define CS1_TYPE_DATA 2 //NAME/ CS1 #define CS1_TYPE_POLL 3 //NAME/ Poll NB #define CS2_TYPE 4 //NAME/ CS2 #define CS3_TYPE 5 //NAME/ CS3 #define CS4_TYPE 6 //NAME/ CS4 #define CS_PAB8_TYPE 7 //NAME/ PRACH 8bit #define CS_PAB11_TYPE 8 //NAME/ PRACH 11bit //END_TABLE/ // USF decoding for PRACH #define USF_INVALID 0 #define USF_GOOD 1 #define USF_BAD 2 #define USF_FREE 7 // DSP tasks #define DL_PDSP_TASK 2 // Downlink task (Normal burst or Prach). #define UL_PDSP_TASK 2 // Uplink task (Normal burst or Prach). #define PB_PDSP_TASK 3 // Power measurement Burst task. // DSP tasks used in d_task_md #define INTERF_DSP_TASK 100 // Interference measurements #define INTERF1_DSP_TASK 101 // 1 Interference measurement #define INTERF2_DSP_TASK 102 // 2 Interference measurement #define INTERF3_DSP_TASK 103 // 3 Interference measurement #define INTERF4_DSP_TASK 104 // 4 Interference measurement #define INTERF5_DSP_TASK 105 // 5 Interference measurement #define INTERF6_DSP_TASK 106 // 6 Interference measurement #define INTERF7_DSP_TASK 107 // 7 Interference measurement #define INTERF8_DSP_TASK 108 // 8 Interference measurement #define PTCCHD_DSP_TASK 109 // PTCCH DL #define PTCCHU_DSP_TASK 110 // PTCCH UL #define PTCCHDU_DSP_TASK 111 // PTCCH DL and UL //--------------------------------------------- // PTCCH activities //--------------------------------------------- #define PTCCH_DL_BIT 0 // PTCCH DL bit position #define PTCCH_UL_BIT 1 // PTCCH UL bit position #define PTCCH_DL (TRUE_L << PTCCH_DL_BIT) #define PTCCH_UL (TRUE_L << PTCCH_UL_BIT) //--------------------------------------------- // SINGLE activities //--------------------------------------------- #define ALL_SINGLE 0xFF #define SINGLE_DL_BIT 0 // SINGLE DL bit position #define SINGLE_UL_BIT 1 // SINGLE UL bit position #define SINGLE_DL (TRUE_L << SINGLE_DL_BIT) #define SINGLE_UL (TRUE_L << SINGLE_UL_BIT) #define SINGLE_DL_MASK ALL_TASK ^ SINGLE_DL #define SINGLE_UL_MASK ALL_TASK ^ SINGLE_UL //--------------------------------------------- // Status for MPHP_SINGLE_BLOCK_CON //--------------------------------------------- #define SINGLE_UL_DONE 0 #define SINGLE_STI_PASSED 1 #define SINGLE_NO_TA 2 #define SINGLE_DL_DONE 3 //--------------------------------------------- // MCU-DSP bit-field bit position definitions //--------------------------------------------- // d_task_u_gprs... #define B_ACCESS_PRACH 13 #define B_PTCCH_UL 14 // d_task_d_gprs... #define B_PTCCH_DL 14 // d_sched_mode_gprs... #define B_SWITCH 0 // Bit 0: switch to GPRS, Bit 1: switch to GSM. #define B_MAC_MODE 2 #define B_RIF_RX_MODE 5 // a_ctrl_abb_gprs or d_ptcchu_ctrl_abb_gprs... #define B_RAMP_GPRS 0 #define B_APCDEL2_GPRS 2 #define B_APCDEL1_GPRS 3 #define B_AFC_GPRS 4 #define B_RAMP_NB_GPRS 5 #define B_MS_RULE 8 // set an additionnal interrupt for the DSP //--------------------------------------------- // LAYER 1 PACKET PERIODIC MEASUREMENT TASKS... //--------------------------------------------- #define P_CRMS 0 // Packet Periodic Measurements task in Idle mode. #define P_TCRMS 1 // Neighbour Measurement in Packet Transfer mode. #define P_CRMS_MEAS (TRUE_L << P_CRMS) // Set Packet Periodic Measurements task #define P_TCRMS_MEAS (TRUE_L << P_TCRMS) // Set Neighbour Measurement Packet Transfer task #define P_CRMS_MEAS_MASK ALL_TASK ^ P_CRMS_MEAS // Mask Packet Periodic Measurement task #define P_TCRMS_MEAS_MASK ALL_TASK ^ P_TCRMS_MEAS // Mask Neighbour Measurement Packet Transfer task //-------------------------------------------- // Paging macro definition //-------------------------------------------- //-- Paging States used for PPCH reading blocks #define PPCH_POS_NOT_COMP 0 #define PPCH_POS_COMP 1 //-- Maximum Number of Packet Paging Blocks #define MAX_NBR_PG_BLKS 11 //-- Paging Block index max #define MAX_PG_BLKS_INDEX 10 //-------------------------------------------- // PBCCH macro definition //-------------------------------------------- //-- Maximum Number of PBCCH Blocks #define MAX_NBR_PB_BLKS 4 //-- PBCCH index max #define MAX_PB_BLKS_INDEX 3 /*--------------------------------------------------------*/ /* Position of different blocs in a MF52. */ /*--------------------------------------------------------*/ #define PCCCH_0 0 #define PCCCH_1 4 #define PCCCH_2 8 #define PCCCH_3 13 #define PCCCH_4 17 #define PCCCH_5 21 #define PCCCH_6 26 #define PCCCH_7 30 #define PCCCH_8 34 #define PCCCH_9 39 #define PCCCH_10 43 #define PCCCH_11 47 //-- PBCCH block position #define B0_POSITION 0L #define B11_POSITION 47L // Power measurement constants // mode for power measurements #define PACKET_IDLE 1 #define PACKET_TRANSFER 2 // number of meas #define NB_MEAS_PACKET_IDLE 4 // Normal case 1RX + 3PW, if no RX=> 4PW // TX burst types #define TX_NB_BURST 0 #define TX_RA_BURST 1 // No power control packet transfer AGC algorithm phases #define SEARCH 0 #define TRACK 1 /*--------------------------------------------------------*/ /* API addresses......................... */ /*--------------------------------------------------------*/ #define DSP_API_ADDRESS_BASE 0x00000800L // #define ARM_API_ADDRESS_BASE 0xFFD00000L // // Herebelow we define the MCU/DSP interface addresses as seen // by the DSP (DSP address space) considering address 0 basis. #if (DSP == 33) || (DSP == 34) || (DSP == 35) || (DSP == 36) #define DSP_MAP_DB_W_PAGE_0_GPRS 0x00000050L // #define DSP_MAP_DB_W_PAGE_1_GPRS 0x00000064L // #define DSP_MAP_DB_R_PAGE_0_GPRS 0x00000078L // #define DSP_MAP_DB_R_PAGE_1_GPRS 0x0000009CL // #define DSP_MAP_NDB_ADR_GPRS 0x000001AEL // #define DSP_MAP_PARAM_ADR_GPRS 0x00000480L // #else #define DSP_MAP_DB_W_PAGE_0_GPRS 0x000004ADL // #define DSP_MAP_DB_W_PAGE_1_GPRS 0x000004C1L // #define DSP_MAP_DB_R_PAGE_0_GPRS 0x000004D5L // #define DSP_MAP_DB_R_PAGE_1_GPRS 0x000004F9L // #define DSP_MAP_NDB_ADR_GPRS 0x00000056L // #define DSP_MAP_PARAM_ADR_GPRS 0x000001F1L // #endif // Herebelow we define the MCU/DSP interface addresses as seen // by the MCU (ARM address space) considering . #define DB_W_PAGE_0_GPRS (ARM_API_ADDRESS_BASE + (DSP_MAP_DB_W_PAGE_0_GPRS * 2)) // #define DB_W_PAGE_1_GPRS (ARM_API_ADDRESS_BASE + (DSP_MAP_DB_W_PAGE_1_GPRS * 2)) // #define DB_R_PAGE_0_GPRS (ARM_API_ADDRESS_BASE + (DSP_MAP_DB_R_PAGE_0_GPRS * 2)) // #define DB_R_PAGE_1_GPRS (ARM_API_ADDRESS_BASE + (DSP_MAP_DB_R_PAGE_1_GPRS * 2)) // #define NDB_ADR_GPRS (ARM_API_ADDRESS_BASE + (DSP_MAP_NDB_ADR_GPRS * 2)) // #define PARAM_ADR_GPRS (ARM_API_ADDRESS_BASE + (DSP_MAP_PARAM_ADR_GPRS * 2)) //