FreeCalypso > hg > fc-magnetite
view blobs/patches/main-fchw.patch @ 548:9f191ca0051f
implemented ability to enable -D_FF_RV_EXIST_ in TIF library
It is not clear if this quirk is intentional or not, but TI's production
version of tif_na7_db_{fl,ir}.lib was built without -D_FF_RV_EXIST_,
and as a result, the code that is present in the source for the
TRACEMASK_IN_FFS feature was not compiled in, making the feature unavailable.
The present change makes it possible to re-enable this code (when TIF
libraries are being rebuilt from source rather than used as blobs)
by setting TRACEMASK_IN_FFS=1 on the configure line.
The new code is NOT enabled by default: it is not a change which we can
justify inflicting on our production firmwares.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Sun, 18 Nov 2018 08:09:17 +0000 |
parents | acb07ce22054 |
children |
line wrap: on
line source
# This patch applies to the Init_Target() function in the init.obj module in # main.lib; it is an example of how this code will need to be patched for # running on our own future FreeCalypso hardware if we choose to use the same # Spansion S71PL129NC0 flash+pSRAM MCP as used in the Pirelli DP-L10 and use # the same memory timings as set by Pirelli's firmware. [init.obj] # value goes into nCS0, nCS1 and nCS3 config registers .text 66 A4 # value goes into nCS2 config reg .text 6C A4 # nop out the write into 0x02700000 .text 128 C0 .text 129 46