view cdg211/prim/ra.pdf @ 581:a0a45c5eb3ef

gsmcomp.c: bumping trace partition size to 220 like in gprscomp.c This change is safe in terms of RAM usage because all of these partition pools have already been moved from XRAM to IRAM earlier, and our IRAM usage in VO configs is currently quite low - the one near the limit is XRAM on C11x.
author Mychaela Falconia <falcon@freecalypso.org>
date Tue, 29 Jan 2019 03:52:49 +0000
parents 56abf6cf8a0b
children
line wrap: on
line source

;********************************************************************************
;*** File           : ra.pdf
;*** Creation       : Fri Jun 08 13:58:18 CST 2007
;*** XSLT Processor : Apache Software Foundation / http://xml.apache.org/xalan-j / supports XSLT-Ver: 1
;*** Copyright      : (c) Texas Instruments AG, Berlin Germany 2002
;********************************************************************************
;*** Document Type  : Service Access Point Specification
;*** Document Name  : ra
;*** Document No.   : 8411.102.98.204
;*** Document Date  : 2002-04-26
;*** Document Status: BEING_PROCESSED
;*** Document Author: SLO
;********************************************************************************



PRAGMA 	SRC_FILE_TIME 	"Mon Nov 24 15:51:06 2003"
PRAGMA 	LAST_MODIFIED 	"2002-04-26"
PRAGMA 	ID_AND_VERSION 	"8411.102.98.204"



CONST 	DUMMY_RA 	0 	; Dummy



VALTAB 	VAL_model
VAL 	0 	RA_MODEL_SPEECH 	"model speech"
VAL 	1 	RA_MODEL_TRANS 	"model 1b async transparent"
VAL 	2 	RA_MODEL_RLP 	"model 3b async nontransparent"
VAL 	3 	RA_MODEL_FAX 	"model 5b fax 3.45"

VALTAB 	VAL_tra_rate
VAL 	0 	TRA_FULLRATE_2400 	"fullrate 2,4/3,6 kBit"
VAL 	1 	TRA_HALFRATE_2400 	"halfrate 2,4/3,6 kBit"
VAL 	2 	TRA_FULLRATE_4800 	"fullrate 4,8/6 kBit"
VAL 	3 	TRA_HALFRATE_4800 	"halfrate 4,8/6 kBit"
VAL 	4 	TRA_FULLRATE_9600 	"fullrate 9,6/12 kBit"
VAL 	5 	TRA_FULLRATE_14400 	"fullrate 13,4/14,4 kBit"

VALTAB 	VAL_user_rate
VAL 	0 	URA_300 	"user rate 300bps"
VAL 	1 	URA_1200 	"user rate 1200bps"
VAL 	2 	URA_2400 	"user rate 2400bps"
VAL 	3 	URA_4800 	"user rate 4800bps"
VAL 	4 	URA_9600 	"user rate 9600bps"
VAL 	5 	URA_1200_75 	"user rate 1200/75bps"
VAL 	6 	URA_14400 	"user rate 14400bps"

VALTAB 	VAL_dtx_flg
VAL 	0 	DTX_DIS 	"Disable DTX"
VAL 	1 	DTX_EN 	"Enable DTX"

VALTAB 	VAL_fr_type
VAL 	0x00 	FR_T4DATA 	"GSM 3.45 Data frame"
VAL 	0x01 	FR_STATUS 	"GSM 3.45 Status (BCS) frame"
VAL 	0x02 	FR_SYNC 	"GSM 3.45 Sync frame"
VAL 	0x03 	FR_TRAIN 	"GSM 3.45 Status (TRAIN) frame"
VAL 	0x04 	FR_TRANS 	"Transparent Data frame"
VAL 	0x05 	FR_RLP 	"Valid RLP frame"
VAL 	0x0F 	FR_INVALID 	"Invalid frame or FCS error detected in RLP mode"

VALTAB 	VAL_status
VAL 	1 	ST_SA 	"Status SA"
VAL 	2 	ST_SB 	"Status SB"
VAL 	4 	ST_X 	"Status X"
VAL 	8 	ST_OVER 	"Overspeed flag"

VALTAB 	VAL_ack_flg
VAL 	0 	RA_ACK 	"acknowledged"
VAL 	1 	RA_NAK 	"not acknowledged"

VALTAB 	VAL_detect
VAL 	0 	DET_NO_STATUS 	"do not detect status frames"
VAL 	1 	DET_STATUS 	"detect status frames"

VALTAB 	VAL_tick_dir
VAL 	1 	TICK_UL 	"tick uplink"
VAL 	2 	TICK_DL 	"tick downlink"
VAL 	3 	TICK_UL_DL 	"tick uplink & downlink"

VALTAB 	VAL_offset
VAL 	0 	ra_conf 	"Configurations"
VAL 	1 	ra_act 	"Activities"
VAL 	2 	ra_test 	"Test"
VAL 	3 	ra_statu 	"Uplink status"
VAL 	4 	ra_statd 	"Downlink status"
VAL 	5 	fax_status_det 	"Fax status detection"
VAL 	6 	rau 	"Buffer for uplink characters"
VAL 	7 	rad 	"Buffer for downlink characters"
VAL 	8 	ntu 	"Buffer for uplink RLP frames"
VAL 	9 	ntd 	"Buffer for downlink RLP frames"
VAL 	10 	faxu 	"Buffer for uplink fax data"
VAL 	11 	faxd 	"Buffer for downlink fax data"




VAR 	model 	"transfer protocol model" 	B

VAL 	@p_ra - VAL_model@ 	

VAR 	tra_rate 	"transmission rate" 	B

VAL 	@p_ra - VAL_tra_rate@ 	

VAR 	user_rate 	"user rate" 	B

VAL 	@p_ra - VAL_user_rate@ 	

VAR 	l_buf 	"length of content in bit" 	S


VAR 	o_buf 	"offset of content in bit" 	S


VAR 	buf 	"buffer content" 	B


VAR 	dtx_flg 	"discontinuous transmission flag" 	B

VAL 	@p_ra - VAL_dtx_flg@ 	

VAR 	req_frames 	"requested frames" 	B


VAR 	fr_type 	"frame type" 	B

VAL 	@p_ra - VAL_fr_type@ 	

VAR 	reserved 	"Reserved" 	B


VAR 	status 	"V24 Status" 	B

VAL 	@p_ra - VAL_status@ 	

VAR 	break_len 	"Break Length" 	S


VAR 	ndb 	"number data bits" 	B


VAR 	nsb 	"number stop bits" 	B


VAR 	ack_flg 	"acknowledge flag" 	B

VAL 	@p_ra - VAL_ack_flg@ 	

VAR 	detect 	"Detect mode" 	B

VAL 	@p_ra - VAL_detect@ 	

VAR 	tick_dir 	"tick direction" 	B

VAL 	@p_ra - VAL_tick_dir@ 	

VAR 	id 	"Bit Identity" 	B


VAR 	offset 	"Address offset" 	B

VAL 	@p_ra - VAL_offset@ 	

VAR 	mask 	"Bit mask" 	S


VAR 	value 	"Bits value" 	S





COMP 	sdu 	 "Service Data Unit"
{
 	l_buf 	 ; length of content in bit
 	o_buf 	 ; offset of content in bit
 	buf 	[1] 	 ; buffer content
}






; RA_ACTIVATE_REQ 	0x80000010
; RA_DEACTIVATE_REQ 	0x80010010
; RA_READY_IND 	0x80004010
; RA_DATA_REQ 	0x80020010
; RA_BREAK_REQ 	0x80030010
; RA_DATA_IND 	0x80014010
; RA_ACTIVATE_CNF 	0x80024010
; RA_DEACTIVATE_CNF 	0x80034010
; RA_BREAK_IND 	0x80044010
; RA_DETECT_REQ 	0x80040010
; RA_MODIFY_REQ 	0x80050010
; RA_MODIFY_CNF 	0x80054010
; RA_DATATRANS_REQ 	0x80060010
; SHM_TICK_REQ 	0x80070010
; SHM_DATA_REQ 	0x80080010
; SHM_READ_REQ 	0x80090010
; SHM_DATA_IND 	0x80064010
; SHM_BITSET_REQ 	0x800A0010
; SHM_BITTEST_REQ 	0x800B0010
; SHM_BITTEST_IND 	0x80074010



PRIM 	RA_ACTIVATE_REQ 	0x80000010
{
 	model 	 ; transfer protocol model
 	tra_rate 	 ; transmission rate
 	user_rate 	 ; user rate
 	ndb 	 ; number data bits
 	nsb 	 ; number stop bits
}






PRIM 	RA_DEACTIVATE_REQ 	0x80010010
{
}






PRIM 	RA_READY_IND 	0x80004010
{
 	req_frames 	 ; requested frames
}






PRIM 	RA_DATA_REQ 	0x80020010
{
 	fr_type 	 ; frame type
 	dtx_flg 	 ; discontinuous transmission flag
 	status 	 ; V.24 Status
 	reserved 	 ; reserved
 	sdu 	 ; service data unit
}






PRIM 	RA_BREAK_REQ 	0x80030010
{
 	break_len 	 ; Break length
}






PRIM 	RA_DATA_IND 	0x80014010
{
 	fr_type 	 ; frame type
 	status 	 ; V.24 Status
 	reserved 	 ; reserved
 	sdu 	 ; service data unit
}






PRIM 	RA_ACTIVATE_CNF 	0x80024010
{
 	ack_flg 	 ; acknowledge flag
}






PRIM 	RA_DEACTIVATE_CNF 	0x80034010
{
}






PRIM 	RA_BREAK_IND 	0x80044010
{
 	break_len 	 ; Break length
}






PRIM 	RA_DETECT_REQ 	0x80040010
{
 	detect 	 ; Detect mode
}






PRIM 	RA_MODIFY_REQ 	0x80050010
{
 	tra_rate 	 ; transmission rate
 	user_rate 	 ; user rate
}






PRIM 	RA_MODIFY_CNF 	0x80054010
{
}






PRIM 	RA_DATATRANS_REQ 	0x80060010
{
}






PRIM 	SHM_TICK_REQ 	0x80070010
{
 	tick_dir 	 ; tick direction
}






PRIM 	SHM_DATA_REQ 	0x80080010
{
 	fr_type 	 ; frame type
 	dtx_flg 	 ; discontinuous transmission flag
 	status 	 ; V.24 Status
 	reserved 	 ; Reserved
 	sdu 	 ; service data unit
}






PRIM 	SHM_READ_REQ 	0x80090010
{
 	model 	 ; transfer protocol model
}






PRIM 	SHM_DATA_IND 	0x80064010
{
 	fr_type 	 ; frame type
 	status 	 ; V.24 Status
 	reserved 	 ; reserved
 	sdu 	 ; service data unit
}






PRIM 	SHM_BITSET_REQ 	0x800A0010
{
 	id 	 ; Bit identity
 	value 	 ; Bits Value
}






PRIM 	SHM_BITTEST_REQ 	0x800B0010
{
 	offset 	 ; Address offset
 	mask 	 ; Bit mask
}






PRIM 	SHM_BITTEST_IND 	0x80074010
{
 	value 	 ; Bits Value
}