view cdg211/prim/rrgrr.pdf @ 581:a0a45c5eb3ef

gsmcomp.c: bumping trace partition size to 220 like in gprscomp.c This change is safe in terms of RAM usage because all of these partition pools have already been moved from XRAM to IRAM earlier, and our IRAM usage in VO configs is currently quite low - the one near the limit is XRAM on C11x.
author Mychaela Falconia <falcon@freecalypso.org>
date Tue, 29 Jan 2019 03:52:49 +0000
parents 56abf6cf8a0b
children
line wrap: on
line source

;********************************************************************************
;*** File           : rrgrr.pdf
;*** Creation       : Fri Jun 08 13:58:24 CST 2007
;*** XSLT Processor : Apache Software Foundation / http://xml.apache.org/xalan-j / supports XSLT-Ver: 1
;*** Copyright      : (c) Texas Instruments AG, Berlin Germany 2002
;********************************************************************************
;*** Document Type  : Service Access Point Specification
;*** Document Name  : rrgrr
;*** Document No.   : 8441.112.03.031
;*** Document Date  : 2003-11-19
;*** Document Status: BEING_PROCESSED
;*** Document Author: SAB
;********************************************************************************



PRAGMA 	SRC_FILE_TIME 	"Tue Jan 31 13:51:40 2006"
PRAGMA 	LAST_MODIFIED 	"2003-11-19"
PRAGMA 	ID_AND_VERSION 	"8441.112.03.031"



CONST 	RRGRR_MAX_ARFCN_NCELL_SYNC_REQ 	12 	; maximum number of frequencies to be synchronised for cell re-selection and EOTD
CONST 	RRGRR_MAX_RSLT_NCELL_SYNC_IND 	6 	; maximum number of results of synchronisation attempts for cell re-selection
CONST 	RRGRR_MAX_ARFCN_EXT_MEAS 	64 	; maximum number of frequencies during Extended Measurement
CONST 	RRGRR_BA_LIST_SIZE 	32 	; BA list size
CONST 	RRGRR_MEAS_REP_LIST_SIZE 	7 	; Measurement report list size (1 serving and 6 neighbour cells)
CONST 	SIZE_MCC 	3 	; maximum number of BCD digits of the mobile country code
CONST 	SIZE_MNC 	3 	; maximum number of BCD digits of the mobile network code



VALTAB 	VAL_cause
VAL 	0 	GPRS_NOT_SUPPORTED 	"Serving cell does not support GPRS"
VAL 	1 	GPRS_SUPPORTED 	"Serving cell supports GPRS"
VAL 	2 	GPRS_CELL_NOT_SUITABLE 	"for GRR-controlled cell reselection"

VALTAB 	VAL_si_to_read
VAL 	0 	UNSPECIFIED_SI 	"Update of unspecified SI message or SI messages"
VAL 	1 	UPDATE_SI1 	"Update of SI1 message"
VAL 	2 	UPDATE_SI2_SI2BIS_OR_SI2TER 	"Update of SI2, SI2 bis or SI2 ter message"
VAL 	3 	UPDATE_SI3_SI4_SI7_OR_SI8 	"Update of SI3, SI4, SI7 or SI8 message"
VAL 	4 	UPDATE_SI9 	"Update of SI9 message"
VAL 	5 	COMPLETE_SI 	"Read complete SI"
VAL 	255 	UPDATE_SI13 	"Update or read of SI13"

VALTAB 	VAL_si1_state
VAL 	0 	SI1_NOT_SEND 	"SI not send"
VAL 	1 	SI1_RECEIVED 	"SI received"
VAL 	2 	SI1_NOT_RECEIVED 	"SI not received"

VALTAB 	VAL_si3_state
VAL 	0 	SI3_NOT_SEND 	"SI not send"
VAL 	1 	SI3_RECEIVED 	"SI received"
VAL 	2 	SI3_NOT_RECEIVED 	"SI not received"

VALTAB 	VAL_si13_state
VAL 	0 	SI13_NOT_SEND 	"SI not send"
VAL 	1 	SI13_RECEIVED 	"SI received"
VAL 	2 	SI13_NOT_RECEIVED 	"SI not received"

VALTAB 	VAL_pg_type
VAL 	0 	RRGRR_IMSI 	"MS is paged by IMSI"
VAL 	1 	RRGRR_PTMSI 	"MS is paged by PTMSI (GPRS TMSI)"

VALTAB 	VAL_rr_est
VAL 	0 	RR_EST_NOT_ALLOWED 	"RR establishment not allowed"
VAL 	1 	RR_EST_ALLOWED 	"RR establishment allowed"

VALTAB 	VAL_susp_req
VAL 	0 	SUSPENSION_REQ_NOT_NEEDED 	"RR need not send GPRS suspension request"
VAL 	1 	SUSPENSION_REQ_NEEDED 	"RR has to send GPRS suspension request"

VALTAB 	VAL_r_bit
VAL 	0 	CHAN_REQ_SENT_ONCE 	"MS has sent channel request only once"
VAL 	1 	CHAN_REQ_SENT_MORE 	"MS has sent channel request twice or more"

VALTAB 	VAL_old_ptmsi
VAL 	0xFFFFFFFF 	RRGRR_PTMSI_INVALID 	"P-TMSI or TMSI invalid (see GSM 3.03)"

VALTAB 	VAL_stop_cause
VAL 	3 	CONTENTION_RESOLUTION_FAIL 	"Establishment fails due to contention resolution"
VAL 	4 	DL_ESTABLISHMENT_FAIL 	"Layer 2 establishment failure"

VALTAB 	VAL_arfcn
VAL 	1 - 124 	"GSM 900 without extension band"
VAL 	1 - 174 	"GSM 900 with extension band"
VAL 	512 - 810 	"PCS 1900"
VAL 	512 - 885 	"DCS 1800"
VAL 	1 - 498 	"Dual band(GSM/DCS)"
VAL 	1 - 548 	"Dual band(EGSM/DCS)"
VAL 	0xFFFF 	RRGRR_INVALID_ARFCN 	"Used to mark a channel number entry as invalid."

VALTAB 	VAL_sb_flag
VAL 	0 	NO_SB_FOUND 	"synchronisation burst not found"
VAL 	1 	SB_FOUND 	"synchronisation burst found"
VAL 	2 	SB_UNKNOWN 	"status of synchronisation burst unknown"

VALTAB 	VAL_bsic
VAL 	0 - 63 	"base station identification code"
VAL 	255 	RRGRR_INVALID_BSIC 	"Used to identify a BSIC entry as invalid"

VALTAB 	VAL_cr_type
VAL 	0 	CR_NEW 	"RR has to reselect the given cell"
VAL 	1 	CR_COMPLETE 	"RR has to camp on this cell"
VAL 	2 	CR_CONT 	"Continue cell reselection."
VAL 	3 	CR_CS 	"start cell selection process again"
VAL 	4 	CR_NEW_NOT_SYNCED 	"start cr for not syncd cell (ie. PCCO)"
VAL 	124 	CR_SUSPENDED_IDLE 	"start idle procedures"
VAL 	125 	CR_REQ_CANDIDATE 	"inform GRR that is has to start a CR"
VAL 	126 	CR_NORMAL 	"Do not abort TBF"
VAL 	127 	CR_ABNORMAL 	"Abort TBF"

VALTAB 	VAL_sync_res
VAL 	0 	SYNC_OK 	"Synchronisation OK"
VAL 	1 	SYNC_FAILED 	"Synchronisation failed"

VALTAB 	VAL_cell_type
VAL 	0 	SYNC_SCELL 	"Synchronisation to serving cell"
VAL 	1 	SYNC_NCELL 	"Synchronisation to neighbour cell"

VALTAB 	VAL_pag_mode
VAL 	0 	PAG_MODE_LAST_ONE 	"RR shall use the last page (before pag_Reorg)"
VAL 	1 	PAG_MODE_REORG 	"RR shall use Paging reorg mode"
VAL 	2 	PAG_MODE_PTM_NP 	"RR shall use the NORMAL paging in packet transfer mode, start only CCCH"
VAL 	3 	PAG_MODE_PIM_NP 	"RR shall start only CCCH with REORG and change to NORMAL paging"
VAL 	255 	PAG_MODE_DEFAULT 	"RR shall use the default paging mode and goes to idle mode"

VALTAB 	VAL_split_pg
VAL 	704 	RRGRR_NO_DRX 	"Non DRX mode"

VALTAB 	VAL_rac
VAL 	0xFF 	RRGRR_RAC_INVALID 	"routing area code invalid"

VALTAB 	VAL_reconn_state
VAL 	0 	RECONN_OK 	"The reconnection to the 'old' channel was cuessful"
VAL 	1 	RECONN_LOW_FAIL 	"A Lower Layer Failure occured during the reconnection."

VALTAB 	VAL_reconn_cause
VAL 	0b00000000 	RECONN_NORM_EVENT 	"Normal event"
VAL 	0b00000001 	RECONN_UNSPECIFIED 	"Abnormal release, unspecified"
VAL 	0b00000010 	RECONN_CHN_UNACCEPTABLE 	"Abnormal release, channel unacceptable"
VAL 	0b00000011 	RECONN_TIMER_EXPIRED 	"Abnormal release, timer expired"
VAL 	0b00000100 	RECONN_NO_ACTIVITY 	"Abnormal release, no activity on the radio path"
VAL 	0b00000101 	RECONN_PREEMPTIVE 	"Preemptive release"
VAL 	0b00001000 	RECONN_TA_OUT_OF_RANGE 	"Handover impossible, timing advance out of range"
VAL 	0b00001001 	RECONN_CHANNEL_MODE 	"Channel mode unacceptable"
VAL 	0b00001010 	RECONN_FREQ_NOT_IMPL 	"Frequency not implemented"
VAL 	0b01000001 	RECONN_CALL_CLEARED 	"Call already cleared"
VAL 	0b01011111 	RECONN_INCORRECT_SEMANTIC 	"Semantically incorrect message"
VAL 	0b01100000 	RECONN_INVALID_INFO 	"Invalid mandatory information"
VAL 	0b01100001 	RECONN_UNKNWN_MSG_TYPE 	"Message type non-existent or not implemented"
VAL 	0b01100010 	RECONN_INCMPTBLE_MSG_TYPE 	"Message type not compatible with protocol state"
VAL 	0b01100100 	RECONN_COND_IE_ERROR 	"Conditional IE error"
VAL 	0b01100101 	RECONN_NO_CELL_ALLOC 	"No cell allocation available"
VAL 	0b01101111 	RECONN_PROT_UNSPECIFIED 	"Protocol error unspecified"

VALTAB 	VAL_ident_type
VAL 	1 	ID_IMSI 	"Paged by IMSI"
VAL 	4 	ID_TMSI 	"Paged by TMSI"
VAL 	8 	ID_PTMSI 	"Paged by PTMSI"

VALTAB 	VAL_report_type
VAL 	0 	REP_TYPE_1 	"synchronize to the 6 strongest carriers and provide their BSICs"
VAL 	1 	REP_TYPE_2 	"synchronize to carriers in decreasing field strength until the BSICs for 6 carriers with allowed NCC are fully decoded"
VAL 	2 	REP_TYPE_3 	"no synchronization, no BSICs are provided"
VAL 	3 	REP_TYPE_RES 	"reserved, ignore request for measurement data in this version"

VALTAB 	VAL_xmeas_cause
VAL 	0 	EXT_MEAS_OK 	"The results of the Extended Measurment procedure are valid."
VAL 	1 	EXT_MEAS_RESET 	"GRR has stopped the Extended Measurement procedure"
VAL 	2 	EXT_MEAS_LEAVE_IDLE 	"RR has entered a non-idle state and stopped the Extended Measurement procedure"

VALTAB 	VAL_lac
VAL 	DEF 	 	"lac"
VAL 	0xFFFE 	RRGRR_LA_INVALID 	"la invalid"

VALTAB 	VAL_v_stop_ccch
VAL 	0 	DONT_STOP_CCCH 	"Don't stop CCCH"
VAL 	1 	STOP_CCCH 	"Stop CCCH"
VAL 	2 	INVALID_MSG 	"The message was not assigned to MS"
VAL 	3 	TASK_STOP_DUMMY_VALUE 	"Dummy value, only used for GRR internal purposes"

VALTAB 	VAL_rxlev
VAL 	0x80 	RRGRR_INVALID_RXLEV 	"receive signal strength level not present"

VALTAB 	VAL_idx
VAL 	0xFF 	RRGRR_INVALID_IDX 	"index not present"

VALTAB 	VAL_state
VAL 	0 	TASK_STATE_PIM 	"Packet Idle Mode"
VAL 	1 	TASK_STATE_PAM 	"Packet Access Mode"
VAL 	2 	TASK_STATE_PTM 	"Packet Transfer Mode"

VALTAB 	VAL_cell_bar_access_2
VAL 	0 	CBA_2_NORMAL 	"Status for cell reselection is set to normal"
VAL 	1 	CBA_2_BARRED 	"Status for cell reselection is set to barred"

VALTAB 	VAL_exc_acc
VAL 	0 	EXC_ACC_NORMAL 	"Status for cell selection and reselection is set to normal"
VAL 	1 	EXC_ACC_LIMITED 	"The MS is only allowed to camp on the cell for limited service"

VALTAB 	VAL_same_ra_as_serving_cell
VAL 	0 	DIFFERENT_RA_AS_SCELL 	"The cell is in a routing area different from the serving cell"
VAL 	1 	SAME_RA_AS_SCELL 	"The cell is in the same routing area as the serving cell"

VALTAB 	VAL_gprs_reselect_offset
VAL 	0 - 31 	"Value range of parameter"
VAL 	0x10 	GPRS_RESEL_OFF_DEFAULT 	"Default value (0 dB)"
VAL 	0xFF 	GPRS_RESEL_OFF_INVALID 	"This value is used to indicate the absence of this parameter"

VALTAB 	VAL_gprs_rxlev_access_min
VAL 	0 - 63 	"Value range of parameter"
VAL 	0xFF 	GPRS_RXLEV_ACCESS_MIN_INVALID 	"This value is used to indicate the absence of this parameter"

VALTAB 	VAL_gprs_ms_txpwr_max_cch
VAL 	0 - 31 	"Value range of parameter"
VAL 	0xFF 	GPRS_MS_TXPWR_MAX_CCH_INVALID 	"This value is used to indicate the absence of this parameter"

VALTAB 	VAL_gprs_temporary_offset
VAL 	0 - 7 	"Value range of parameter"
VAL 	0xFF 	GPRS_TEMPORARY_OFFSET_INVALID 	"This value is used to indicate the absence of this parameter"

VALTAB 	VAL_gprs_penalty_time
VAL 	0 - 31 	"Value range of parameter"
VAL 	0xFF 	GPRS_PENALTY_TIME_INVALID 	"This value is used to indicate the absence of this parameter"

VALTAB 	VAL_priority_class
VAL 	0 - 7 	"Value range of parameter"
VAL 	0xFF 	GPRS_PRIORITY_CLASS_INVALID 	"This value is used to indicate the absence of this parameter"

VALTAB 	VAL_hcs_thr
VAL 	0 - 31 	"Value range of parameter"
VAL 	0xFF 	GPRS_HCS_THR_INVALID 	"This value is used to indicate the absence of this parameter"

VALTAB 	VAL_si13_location
VAL 	0 	SI13_LOC_BCCH_NORM 	"SYSTEM INFORMATION TYPE 13 message is sent on BCCH norm"
VAL 	1 	SI13_LOC_BCCH_EXT 	"SYSTEM INFORMATION TYPE 13 message is sent on BCCH ext"
VAL 	0xFF 	SI13_LOC_INVALID 	"This value is used to indicate the absence of this parameter"

VALTAB 	VAL_pbcch_location
VAL 	0 - 3 	"Value range of parameter"
VAL 	0xFF 	PBCCH_LOC_INVALID 	"This value is used to indicate the absence of this parameter"

VALTAB 	VAL_psi1_repeat_period
VAL 	0 - 15 	"Value range of parameter"
VAL 	0xFF 	PSI1_RPT_PRD_INVALID 	"This value is used to indicate the absence of this parameter"

VALTAB 	VAL_nc_mode
VAL 	0 	NC2_NOT_USED 	"allow cell reselection"
VAL 	1 	NC2_USED 	"inhibit cell reselection"
VAL 	2 	NC_MODE_RESET 	"NC is reset to default"

VALTAB 	VAL_meas_cause
VAL 	0x0 	NC_STOP_MEAS 	" Stop the meas report"
VAL 	0x1 	NC_START_MEAS 	"Start Averaging of measurements"
VAL 	0x2 	NC_REPORT_MEAS 	"get the meas report from RR"

VALTAB 	VAL_sync_type
VAL 	0 	SYNC_INITIAL 	"Sync request for new carrier"
VAL 	1 	SYNC_RECONFIRM 	"Reconfirm 10 sec Timer Expired"




VAR 	cause 	"Cause" 	B

VAL 	@p_rrgrr - VAL_cause@ 	

VAR 	bcch_arfcn 	"Frequency of BCCH" 	S


VAR 	bcch_bsic 	"BSIC of BCCH" 	B


VAR 	ac_class 	"Access class for RACH" 	S


VAR 	pwr_offset 	"Power offset" 	B


VAR 	limited 	"Limited service" 	B


VAR 	l_buf 	"length of content in bit" 	S


VAR 	o_buf 	"offset of content in bit" 	S


VAR 	buf 	"buffer content" 	B


VAR 	si_to_read 	"SI to read" 	B

VAL 	@p_rrgrr - VAL_si_to_read@ 	

VAR 	si1_state 	"SI1 states" 	B

VAL 	@p_rrgrr - VAL_si1_state@ 	

VAR 	si3_state 	"SI3 states" 	B

VAL 	@p_rrgrr - VAL_si3_state@ 	

VAR 	si13_state 	"SI13 states" 	B

VAL 	@p_rrgrr - VAL_si13_state@ 	

VAR 	pg_type 	"The type of paging" 	B

VAL 	@p_rrgrr - VAL_pg_type@ 	

VAR 	rr_est 	"Allowance of RR establishment" 	B

VAL 	@p_rrgrr - VAL_rr_est@ 	

VAR 	v_non_gprs 	"Valid flag for non GPRS" 	B


VAR 	att 	"Attach/detach allowed" 	B


VAR 	v_T3212 	"Valid flag for T3212" 	B


VAR 	T3212 	"T3212 value" 	B


VAR 	neci 	"Half rate support" 	B


VAR 	pwrc 	"Power control indicator" 	B


VAR 	dtx 	"DTX indicator" 	B


VAR 	radio_link_timeout 	"Supervisory timer for RR connection" 	B


VAR 	bs_ag_blks_res 	"Number of blocks reserved for access grant" 	B


VAR 	ccch_conf 	"Physical channel configuration for CCCH" 	B


VAR 	max_retrans 	"Maximum number of retransmissions" 	B


VAR 	tx_integer 	"Number of slots to spread transmission" 	B


VAR 	ec 	"Emergency call allowed" 	B


VAR 	v_ext_ie 	"Valid flag for extension bits IE" 	B


VAR 	ext_len 	"Extension length" 	B


VAR 	spare_bit 	"Spare bit (val(ext_len)+1)" 	B


VAR 	ch_needed 	"Channel needed field" 	B


VAR 	v_emlpp 	"Valid flag" 	B


VAR 	emlpp 	"Value of emlpp_prio" 	B


VAR 	susp_req 	"Send GPRS suspension request flag" 	B

VAL 	@p_rrgrr - VAL_susp_req@ 	

VAR 	req_data 	"" 	B


VAR 	ia_index 	"indicates valid parts of the Imm Ass Ext msg" 	B


VAR 	fn 	"Frame Number" 	L


VAR 	wait_ind 	"wait indication (T3122)" 	B


VAR 	r_bit 	"retry bit" 	B

VAL 	@p_rrgrr - VAL_r_bit@ 	

VAR 	old_ptmsi 	"Packet Temporary Mobile Subsciber Identity" 	L

VAL 	@p_rrgrr - VAL_old_ptmsi@ 	

VAR 	new_ptmsi 	"Packet Temporary Mobile Subsciber Identity" 	L

VAL 	@p_rrgrr - VAL_old_ptmsi@ 	

VAR 	mac_req 	"MAC mode request" 	B


VAR 	cs_req 	"Channel Coding Schemme Request" 	B


VAR 	tlli 	"temporary logical link identifier" 	L


VAR 	mo_mt 	"MO/MT FALG" 	B


VAR 	prio 	"Priority" 	B


VAR 	rlc_mode_req 	"RLC Mode" 	B


VAR 	llc_type 	"LLC Frame Type" 	B


VAR 	req_bwd 	"Requested Bandwidth" 	S


VAR 	rlc_octets 	"RLC Octet Count" 	S


VAR 	c_value 	"C_Value" 	B


VAR 	rxqual 	"Rx Quality" 	B


VAR 	sign_var 	"Signal Variance" 	B


VAR 	stop_cause 	"Stop cause" 	B

VAL 	@p_rrgrr - VAL_stop_cause@ 	

VAR 	arfcn 	"channel number" 	S

VAL 	@p_rrgrr - VAL_arfcn@ 	

VAR 	sb_flag 	"synchronisation burst flag" 	B

VAL 	@p_rrgrr - VAL_sb_flag@ 	

VAR 	bsic 	"base station identification code" 	B

VAL 	@p_rrgrr - VAL_bsic@ 	

VAR 	cr_type 	"Cell re-selection mode" 	B

VAL 	@p_rrgrr - VAL_cr_type@ 	

VAR 	sync_res 	"Indicates the result of synchronisation" 	B

VAL 	@p_rrgrr - VAL_sync_res@ 	

VAR 	cell_type 	"Ncell or Scell" 	B

VAL 	@p_rrgrr - VAL_cell_type@ 	

VAR 	v_cr_par 	"Valid Flag for GPRS Cell Selection Parameter" 	B


VAR 	pag_mode 	"Paging Mode" 	B

VAL 	@p_rrgrr - VAL_pag_mode@ 	

VAR 	split_pg 	"Split paging cycle (the value, NOT the code)" 	S

VAL 	@p_rrgrr - VAL_split_pg@ 	

VAR 	rac 	"routing are code" 	B

VAL 	@p_rrgrr - VAL_rac@ 	

VAR 	is_pbcch_present 	"Indicates whether PBCCH is present or not" 	B


VAR 	reconn_state 	"Indicates that the reconnection was successful or not" 	B

VAL 	@p_rrgrr - VAL_reconn_state@ 	

VAR 	reconn_cause 	"Cause for the reconnection, refer to causes sent with ASSIGNMENT FAILURE [3]" 	B

VAL 	@p_rrgrr - VAL_reconn_cause@ 	

VAR 	ident_type 	"Identity type" 	B

VAL 	@p_rrgrr - VAL_ident_type@ 	

VAR 	tmsi 	"temporary logical link identifier" 	L


VAR 	report_type 	"Extended Measurement reporting type" 	B

VAL 	@p_rrgrr - VAL_report_type@ 	

VAR 	ncc_permitted 	"network colour code permission indicator" 	B


VAR 	call_ref 	"Call reference ID" 	B


VAR 	xmeas_cause 	"indicates the state of the extended measurement results" 	B

VAL 	@p_rrgrr - VAL_xmeas_cause@ 	

VAR 	lac 	"location area code" 	S

VAL 	@p_rrgrr - VAL_lac@ 	

VAR 	v_plmn 	"Valid Flag" 	B


VAR 	mcc 	"Mobile Country Code" 	B


VAR 	mnc 	"Mobile Network Code" 	B


VAR 	v_stop_ccch 	"Indicates whether CCCH shall be stopped" 	B

VAL 	@p_rrgrr - VAL_v_stop_ccch@ 	

VAR 	cid 	"cell identification" 	S


VAR 	rxlev 	"receive signal strength level" 	B

VAL 	@p_rrgrr - VAL_rxlev@ 	

VAR 	idx 	"index" 	B

VAL 	@p_rrgrr - VAL_idx@ 	

VAR 	state 	"Indicates to RR the state of GRR" 	B

VAL 	@p_rrgrr - VAL_state@ 	

VAR 	v_pim_pbcch 	"pim" 	B


VAR 	v_pam_pbcch 	"pam" 	B


VAR 	v_ptm_pbcch 	"ptm" 	B


VAR 	bs_pa_mfrms 	"Paging Channel configuration" 	B


VAR 	cell_bar_access_2 	"CELL_BAR_ACCESS_2" 	B

VAL 	@p_rrgrr - VAL_cell_bar_access_2@ 	

VAR 	exc_acc 	"EXC_ACC" 	B

VAL 	@p_rrgrr - VAL_exc_acc@ 	

VAR 	same_ra_as_serving_cell 	"SAME_RA_AS_SERVING_CELL" 	B

VAL 	@p_rrgrr - VAL_same_ra_as_serving_cell@ 	

VAR 	gprs_reselect_offset 	"GPRS_RESELECT_OFFSET" 	B

VAL 	@p_rrgrr - VAL_gprs_reselect_offset@ 	

VAR 	gprs_rxlev_access_min 	"GPRS_RXLEV_ACCESS_MIN" 	B

VAL 	@p_rrgrr - VAL_gprs_rxlev_access_min@ 	

VAR 	gprs_ms_txpwr_max_cch 	"GPRS_MS_TXPWR_MAX_CCH" 	B

VAL 	@p_rrgrr - VAL_gprs_ms_txpwr_max_cch@ 	

VAR 	gprs_temporary_offset 	"GPRS_TEMPORARY_OFFSET" 	B

VAL 	@p_rrgrr - VAL_gprs_temporary_offset@ 	

VAR 	gprs_penalty_time 	"GPRS_PENALTY_TIME" 	B

VAL 	@p_rrgrr - VAL_gprs_penalty_time@ 	

VAR 	priority_class 	"PRIORITY_CLASS" 	B

VAL 	@p_rrgrr - VAL_priority_class@ 	

VAR 	hcs_thr 	"HCS_THR" 	B

VAL 	@p_rrgrr - VAL_hcs_thr@ 	

VAR 	si13_location 	"SI13 Location" 	B

VAL 	@p_rrgrr - VAL_si13_location@ 	

VAR 	pbcch_location 	"PBCCH_LOCATION" 	B

VAL 	@p_rrgrr - VAL_pbcch_location@ 	

VAR 	psi1_repeat_period 	"PSI1_REPEAT_PERIOD" 	B

VAL 	@p_rrgrr - VAL_psi1_repeat_period@ 	

VAR 	nc_mode 	"NC mode" 	B

VAL 	@p_rrgrr - VAL_nc_mode@ 	

VAR 	meas_cause 	"Basic Element" 	B

VAL 	@p_rrgrr - VAL_meas_cause@ 	

VAR 	sync_type 	"Sync Info indicating the Reconfirm Sync timer status" 	B

VAL 	@p_rrgrr - VAL_sync_type@ 	




COMP 	sdu 	 "service data unit"
{
 	l_buf 	 ; length of content in bit
 	o_buf 	 ; offset of content in bit
 	buf 	[1] 	 ; buffer content
}



COMP 	si_states 	 "States of the SI"
{
 	si1_state 	 ; State of SI1
 	si3_state 	 ; State of SI3
 	si13_state 	 ; State of SI13
}



COMP 	ext_ie 	 "Possible future extension"
{
 	ext_len 	 ; Extension length
 	spare_bit 	[8] 	 ; Spare bit (val(ext_len)+1)
}



COMP 	non_gprs 	 "Non-GPRS parameters"
{
 	v_non_gprs 	 ; Valid flag for non GPRS
 	att 	 ; Attach/detach allowed
 	v_T3212 	 ; Valid flag for T3212
 	T3212 	 ; T3212 value
 	neci 	 ; Half rate support
 	pwrc 	 ; Power control indicator
 	dtx 	 ; DTX indicator
 	radio_link_timeout 	 ; Supervisory timer for RR connection
 	bs_ag_blks_res 	 ; Number of blocks reserved for access grant
 	ccch_conf 	 ; Physical channel configuration for CCCH
 	bs_pa_mfrms 	 ; 51 MFs between paging
 	max_retrans 	 ; Maximum number of retransmissions
 	tx_integer 	 ; Number of slots to spread transmission
 	ec 	 ; Emergency call allowed
 	gprs_ms_txpwr_max_cch 	 ; GPRS_MS_TXPWR_MAX_CCH
 	v_ext_ie 	 ; Valid flag for extension bits IE
 	ext_ie 	 ; Possible future extension
}



COMP 	emlpp_prio 	 "eMLPP_PRIORITY"
{
 	v_emlpp 	 ; Valid flag
 	emlpp 	 ; Value of emlpp_prio
}



COMP 	p_chan_req_des 	 "Requested channel characteristics"
{
 	mo_mt 	 ; MO/MT FALG
 	prio 	 ; Priority
 	rlc_mode_req 	 ; RLC Mode
 	llc_type 	 ; LLC Frame Type
 	req_bwd 	 ; Requested Bandwidth
 	rlc_octets 	 ; RLC Octet Count
}



COMP 	gprs_meas_results 	 "GPRS Measurement Results"
{
 	c_value 	 ; C_Value
 	rxqual 	 ; Rx Quality
 	sign_var 	 ; Signal Variance
}



COMP 	sync_result 	 "Results of Synchronisation Attempts"
{
 	arfcn 	 ; Channel Number
 	sb_flag 	 ; Error Cause
 	bsic 	 ; Base Station Identity Code
}



COMP 	rm_freq_list 	 "frequencies to be removed"
{
 	arfcn 	 ; Channel Number
 	bsic 	 ; BSIC
}



COMP 	meas_res 	 "measurements ordered by the network"
{
 	arfcn 	 ; ARFCN
 	bsic 	 ; BSIC
 	rxlev 	 ; RX Value
}



COMP 	arfcn_idx 	 "Channel number and a associated index"
{
 	arfcn 	 ; Radio Frequency Number
 	idx 	 ; Index to the ARFCN
}



COMP 	xmeas_res 	 "results of the extended measurement"
{
 	arfcn_idx 	 ; Radio Frequency Number and index
 	rxlev 	 ; field strength
 	bsic 	 ; Base Station Identification Code
}



COMP 	plmn 	 "PLMN identification"
{
 	v_plmn 	 ; Valid Flag
 	mcc 	[SIZE_MCC] 	 ; Mobile Country Code
 	mnc 	[SIZE_MNC] 	 ; Mobile Network Code
}



COMP 	rai 	 "routing area identifier"
{
 	plmn 	 ; PLMN
 	lac 	 ; Location Area Code
 	rac 	 ; Routing Area Code
}



UNION 	task 	 "Task"
{
 	RR_TASK_1 	v_stop_ccch 	 ; Stop CCCH indicator
 	LEAVE_PIM_PBCCH 	v_pim_pbcch 	 ; Leave idle mode
 	LEAVE_PAM_PBCCH 	v_pam_pbcch 	 ; Leave access mode
 	LEAVE_PTM_PBCCH 	v_ptm_pbcch 	 ; Leave transfer mode
}



COMP 	rr_cell_env 	 "current location of the mobile equipment"
{
 	plmn 	 ; PLMN
 	lac 	 ; Location Area Code
 	cid 	 ; Cell Identification
}



COMP 	serving_cell_info 	 "Cell information"
{
 	gprs_rxlev_access_min 	 ; GPRS_RXLEV_ACCESS_MIN
 	gprs_ms_txpwr_max_cch 	 ; GPRS_MS_TXPWR_MAX_CCH
 	bcch_arfcn 	 ; Frequency of BCCH
 	bcch_bsic 	 ; BSIC of BCCH
 	ac_class 	 ; Access class for RACH
 	pwr_offset 	 ; Power offset
 	rr_cell_env 	 ; Cell Environment
 	limited 	 ; Limited service
 	bs_pa_mfrms 	 ; BS_PA_MFRMS
 	arfcn 	[RRGRR_BA_LIST_SIZE] 	 ; BA List
}



COMP 	cr_par 	 "GPRS Cell Selection Parameter"
{
 	cell_bar_access_2 	 ; CELL_BAR_ACCESS_2
 	exc_acc 	 ; EXC_ACC
 	same_ra_as_serving_cell 	 ; SAME_RA_AS_SERVING_CELL
 	gprs_rxlev_access_min 	 ; GPRS_RXLEV_ACCESS_MIN
 	gprs_ms_txpwr_max_cch 	 ; GPRS_MS_TXPWR_MAX_CCH
 	gprs_temporary_offset 	 ; GPRS_TEMPORARY_OFFSET
 	gprs_penalty_time 	 ; GPRS_PENALTY_TIME
 	gprs_reselect_offset 	 ; GPRS_RESELECT_OFFSET
 	priority_class 	 ; PRIORITY_CLASS
 	hcs_thr 	 ; HCS_THR
 	si13_location 	 ; SI13_LOCATION
 	pbcch_location 	 ; PBCCH_LOCATION
 	psi1_repeat_period 	 ; PSI1_REPEAT_PERIOD
}



COMP 	add_freq_list 	 "BA list"
{
 	arfcn 	 ; ARFCN
 	bsic 	 ; BSIC
 	v_cr_par 	 ; Valid Flag for GPRS Cell Selection Parameter
 	cr_par 	 ; GPRS Cell Selection Parameter
}






; RRGRR_GPRS_SI13_IND 	0x6D00
; RRGRR_PACKET_PAGING_IND 	0x6D02
; RRGRR_CHANNEL_REQ 	0x2D00
; RRGRR_IA_IND 	0x6D03
; RRGRR_IAEXT_IND 	0x6D04
; RRGRR_ASSIGNMENT_REJ_IND 	0x6D05
; RRGRR_DATA_IND 	0x6D06
; RRGRR_DATA_REQ 	0x2D02
; RRGRR_IA_DOWNLINK_IND 	0x6D08
; RRGRR_START_MON_CCCH_REQ 	0x2D03
; RRGRR_STOP_MON_CCCH_REQ 	0x2D04
; RRGRR_CR_REQ 	0x2D05
; RRGRR_START_MON_BCCH_REQ 	0x2D06
; RRGRR_RR_EST_REQ 	0x2D07
; RRGRR_RR_EST_RSP 	0x2D08
; RRGRR_RR_EST_IND 	0x6D0D
; RRGRR_ACTIVATE_REQ 	0x2D0A
; RRGRR_GPRS_DATA_REQ 	0x2D0C
; RRGRR_SUSPEND_DCCH_REQ 	0x2D0D
; RRGRR_SUSPEND_DCCH_CNF 	0x6D10
; RRGRR_RECONNECT_DCCH_REQ 	0x2D0E
; RRGRR_RECONNECT_DCCH_CNF 	0x6D11
; RRGRR_RESUMED_TBF_REQ 	0x2D01
; RRGRR_RESUMED_TBF_CNF 	0x6D07
; RRGRR_STOP_DCCH_IND 	0x6D12
; RRGRR_CR_IND 	0x6D13
; RRGRR_NCELL_SYNC_REQ 	0x2D0F
; RRGRR_NCELL_SYNC_IND 	0x6D15
; RRGRR_SYNC_REQ 	0x2D10
; RRGRR_SYNC_IND 	0x6D16
; RRGRR_UPDATE_BA_REQ 	0x2D12
; RRGRR_MEAS_REP_REQ 	0x2D13
; RRGRR_MEAS_REP_CNF 	0x6D17
; RRGRR_TBF_ESTABLISHED_REQ 	0x2D14
; RRGRR_CR_RSP 	0x2D15
; RRGRR_MS_ID_IND 	0x6D19
; RRGRR_EXT_MEAS_REQ 	0x2D16
; RRGRR_EXT_MEAS_CNF 	0x6D0A
; RRGRR_EXT_MEAS_STOP_REQ 	0x2D17
; RRGRR_STOP_TASK_REQ 	0x2D18
; RRGRR_STOP_TASK_CNF 	0x6D09
; RRGRR_START_TASK_REQ 	0x2D19
; RRGRR_START_TASK_CNF 	0x6D1A
; RRGRR_STANDBY_STATE_IND 	0x2D1A
; RRGRR_READY_STATE_IND 	0x2D1B



PRIM 	RRGRR_GPRS_SI13_IND 	0x6D00
{
 	cause 	 ; Cause
 	si_states 	 ; State of SI
 	serving_cell_info 	 ; Cell information
 	sdu 	 ; Sdu to SI13 message
}






PRIM 	RRGRR_PACKET_PAGING_IND 	0x6D02
{
 	pg_type 	 ; Paging type
}






PRIM 	RRGRR_CHANNEL_REQ 	0x2D00
{
 	req_data 	 ; Channel Request Data
}






PRIM 	RRGRR_IA_IND 	0x6D03
{
 	fn 	 ; Frame Number
 	r_bit 	 ; Retry Bit
 	sdu 	 ; Sdu to message
}






PRIM 	RRGRR_IAEXT_IND 	0x6D04
{
 	ia_index 	 ; Index of IA
 	fn 	 ; Frame Number
 	r_bit 	 ; Retry Bit
 	sdu 	 ; Sdu to message
}






PRIM 	RRGRR_ASSIGNMENT_REJ_IND 	0x6D05
{
 	wait_ind 	 ; wait indication
 	r_bit 	 ; Retry Bit
}






PRIM 	RRGRR_DATA_IND 	0x6D06
{
 	fn 	 ; Frame Number
 	sdu 	 ; Sdu to message
}






PRIM 	RRGRR_DATA_REQ 	0x2D02
{
 	sdu 	 ; Sdu to message
}






PRIM 	RRGRR_IA_DOWNLINK_IND 	0x6D08
{
 	fn 	 ; Frame Number
 	r_bit 	 ; Retry Bit
 	sdu 	 ; Sdu to message
}






PRIM 	RRGRR_START_MON_CCCH_REQ 	0x2D03
{
 	pag_mode 	 ; Paging Mode
 	split_pg 	 ; Split paging cycle
}






PRIM 	RRGRR_STOP_MON_CCCH_REQ 	0x2D04
{
 	is_pbcch_present 	 ; PBCCH indicator
}






PRIM 	RRGRR_CR_REQ 	0x2D05
{
 	cr_type 	 ; Cell re-selection mode
 	arfcn 	 ; channel number
 	bsic 	 ; bsic
}






PRIM 	RRGRR_START_MON_BCCH_REQ 	0x2D06
{
 	si_to_read 	 ; SI to read
}






PRIM 	RRGRR_RR_EST_REQ 	0x2D07
{
 	non_gprs 	 ; Non-GPRS parameters
 	ch_needed 	 ; Channel needed field
 	ident_type 	 ; Identity Type
 	emlpp_prio 	 ; eMLPP_PRIORITY
 	susp_req 	 ; GPRS Suspension request
}






PRIM 	RRGRR_RR_EST_RSP 	0x2D08
{
 	rr_est 	 ; RR establishment allowence
 	susp_req 	 ; GPRS Suspension request
}






PRIM 	RRGRR_RR_EST_IND 	0x6D0D
{
}






PRIM 	RRGRR_ACTIVATE_REQ 	0x2D0A
{
 	non_gprs 	 ; Non-GPRS parameters
 	susp_req 	 ; GPRS Suspension request
 	rac 	 ; Routing area code
}






PRIM 	RRGRR_GPRS_DATA_REQ 	0x2D0C
{
 	old_ptmsi 	 ; Packet TMSI
 	new_ptmsi 	 ; Packet TMSI
 	tlli 	 ; TLLI
 	p_chan_req_des 	 ; Packet Channel Request Description
 	gprs_meas_results 	 ; GPRS Measurement Results
 	mac_req 	 ; MAC Mode Requested
 	cs_req 	 ; Channel Coding Scheme Requested
 	rai 	 ; Last valid routing area identifier
}






PRIM 	RRGRR_SUSPEND_DCCH_REQ 	0x2D0D
{
}






PRIM 	RRGRR_SUSPEND_DCCH_CNF 	0x6D10
{
}






PRIM 	RRGRR_RECONNECT_DCCH_REQ 	0x2D0E
{
 	reconn_cause 	 ; why can't the procedure continue; ref to ASSIGNMENT FAILURE message
}






PRIM 	RRGRR_RECONNECT_DCCH_CNF 	0x6D11
{
 	reconn_state 	 ; result of the reconnection procedure; may indicate Lower Layer Failure
}






PRIM 	RRGRR_RESUMED_TBF_REQ 	0x2D01
{
}






PRIM 	RRGRR_RESUMED_TBF_CNF 	0x6D07
{
}






PRIM 	RRGRR_STOP_DCCH_IND 	0x6D12
{
 	stop_cause 	 ; Stop Cause
}






PRIM 	RRGRR_CR_IND 	0x6D13
{
 	cr_type 	 ; Cell re-selection mode
}






PRIM 	RRGRR_NCELL_SYNC_REQ 	0x2D0F
{
 	arfcn 	[RRGRR_MAX_ARFCN_NCELL_SYNC_REQ] 	 ; List of Channel Numbers
 	sync_type 	 ; Primitive Item
}






PRIM 	RRGRR_NCELL_SYNC_IND 	0x6D15
{
 	sync_result 	[RRGRR_MAX_RSLT_NCELL_SYNC_IND] 	 ; Results of Neighbour Cell Synchronisation
}






PRIM 	RRGRR_SYNC_REQ 	0x2D10
{
 	arfcn 	 ; Frequency
 	bsic 	 ; Bsic
}






PRIM 	RRGRR_SYNC_IND 	0x6D16
{
 	sync_res 	 ; Synchronisation Result
}






PRIM 	RRGRR_UPDATE_BA_REQ 	0x2D12
{
 	cell_type 	 ; cell type
 	nc_mode 	 ; NC mode
 	add_freq_list 	[RRGRR_BA_LIST_SIZE] 	 ; ba list added
 	rm_freq_list 	[RRGRR_BA_LIST_SIZE] 	 ; ba list removed
}






PRIM 	RRGRR_MEAS_REP_REQ 	0x2D13
{
 	meas_cause 	 ; measurement repot
}






PRIM 	RRGRR_MEAS_REP_CNF 	0x6D17
{
 	meas_res 	[RRGRR_MEAS_REP_LIST_SIZE] 	 ; meas report
}






PRIM 	RRGRR_TBF_ESTABLISHED_REQ 	0x2D14
{
}






PRIM 	RRGRR_CR_RSP 	0x2D15
{
}






PRIM 	RRGRR_MS_ID_IND 	0x6D19
{
 	tmsi 	 ; T M S I
}






PRIM 	RRGRR_EXT_MEAS_REQ 	0x2D16
{
 	arfcn_idx 	[1..RRGRR_MAX_ARFCN_EXT_MEAS] 	 ; Frequency Channel Numbers
 	call_ref 	 ; Call reference ID
 	report_type 	 ; Reporting type
 	ncc_permitted 	 ; Permitted cells indication
}






PRIM 	RRGRR_EXT_MEAS_CNF 	0x6D0A
{
 	xmeas_res 	[0..RRGRR_MAX_ARFCN_EXT_MEAS] 	 ; Frequency Channel Numbers; array length = 0 if procedure was stopped
 	call_ref 	 ; Call reference ID
 	xmeas_cause 	 ; Result state
}






PRIM 	RRGRR_EXT_MEAS_STOP_REQ 	0x2D17
{
}






PRIM 	RRGRR_STOP_TASK_REQ 	0x2D18
{
 	task 	 ; Task
}






PRIM 	RRGRR_STOP_TASK_CNF 	0x6D09
{
}






PRIM 	RRGRR_START_TASK_REQ 	0x2D19
{
 	state 	 ; State
}






PRIM 	RRGRR_START_TASK_CNF 	0x6D1A
{
}






PRIM 	RRGRR_STANDBY_STATE_IND 	0x2D1A
{
}






PRIM 	RRGRR_READY_STATE_IND 	0x2D1B
{
}